Synthesis of 2,3-disubstituted pyrroles from 3,N-dilithio-N-(tert-butyldimethylsilyl)-2-buten-1-amine.

N-(Trialkylsilyl)allylamines can be deprotonated at the cis-vinylic position to yield 3,N-dilithio-N-(trialkylsilyl)allylamines under mild conditions. N-(Trialkylsilyl)allylamines with terminal alkyl substituents were reported not to form dianions under the same conditions. During our investigations we found that N-(tert-butyldimethylsilyl)-2-buten-1-amine (1) is deprotonated under the reaction conditions reported in the literature, but the resulting dianion is quenched by ethereal solvents. Consequently, new reaction conditions were developed that allow the generation of stable dianions from allylamines with terminal alkyl substituents. Thus, 2,3-disubstituted pyrroles hitherto unattainable via this methodology were formed from 3,N-dilithio-N-(tert-butyldimethylsilyl)-2-buten-1-amine (2) and various carbonyl electrophiles in good yields.     

Solid-state and solution structures of hetero-aggregates formed between nBuLi and NCN pincer aryl lithium

The reaction of NCNLi pincers (NCN = [2,6-(R(2)NCH(2))(2)C(6)H(3)](-), R = Me (), Et ()) with various equivalents of nBuLi in non-polar solvent results in the generation of novel mixed alkyl-aryl organolithium hetero-aggregates. The identification (variable temperature (1)H, (13)C, (7)Li and 2D NMR spectroscopy and X-ray crystallography) of multiple, equilibrating mixed-aggregates that form in these reactions has been achieved. Fluxional processes in the parent [NCNLi](2) dimeric homo-aggregates were re-evaluated and Li-N bond rupture was found to be in operation, a prerequisite towards further aggregation chemistry. The crystallized aggregates, with the formula (2).[nBuLi](2) or (2).[nBuLi](2), shows one amine arm from each NCNLi fragment stabilizing a [nBuLi](2) dimer. The core of the aggregates exhibit a roughly cubic Li(4)C(4) configuration with each aryl carbanion eta(3) coordinated to Li(3) triangular faces. Dissolution of microcrystalline powders of (2).[nBuLi](2) or (2).[nBuLi](2) regenerates the observed equilibria. Based on the NMR data, the remaining mixed aggregates are proposed to have the formula .[nBuLi](3) and .[nBuLi](3), respectively; the solution structure is again based on a Li(4)C(4) cluster. The relative concentration of the constituents in these equilibria was found to vary depending on the steric size of the amine groups. In the case of , the predominant species is the (2).[nBuLi](2) aggregate while for , the dimer (2) is favoured.     

Regio- and stereoselective lithiation of 2,3-diphenylaziridines: a multinuclear NMR investigation

The alpha-lithiation-trapping sequence of trans-N-alkyl-2,3-diphenylaziridines (s-BuLi or s-BuLi/TMEDA), taking place with a stereochemistry which dramatically depends on the solvent coordinating ability (inversion of configuration in THF and retention in toluene), has been carefully investigated. 1H,13C, and 7Li multinuclear NMR investigations at low temperature suggest that two differently configured lithiated aziridines (monomeric cis-1-Li in THF and dimeric trans-1-Li in toluene) are involved.     

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.     

A theoretical study on nBuLi/lithium aminoalkoxide aggregation in hexane and THF

Theoretical calculations on aggregation of nBuLi/lithium aminoalkoxide superbases, such as nBuLi/LiDMAE (LiDMAE = Me(2)N(CH(2))(2)OLi) and nBuLi/LiPM (LiPM = Li-N-methyl-2-pyrrolidine methoxide) in gas phase and solution are reported. The combination of equimolar amounts of each component in hexane induced unusual reactivity of the resulting superbase, which remains misunderstood. In order to elucidate the corresponding reaction mechanisms, it is imperative to get a deeper insight into the energetics of aggregation and the effect of the medium on equilibrium constants. In the present study, we compute and compare the stability of (nBuLi)(n), (LiPM)(n), and equimolecular mixed aggregates (nBuLi:LiPM)(n) in gas phase, hexane, and THF. Calculations have been carried out at the density functional theory level (B3LYP/6-31G(d)) using continuum and discrete continuum models of solvation. Higher-level calculations (MP2/aug-ccpVQZ) have been done in some cases for test purposes. Enthalpic and entropic contributions have been discussed and were shown to play an opposite role in hexane (or gas phase) and THF. The characteristics of LiPM and mixed nBuLi/LiPM solutions are found to be significantly different from those of nBuLi solutions. These calculations are in accordance with experimental data in both hexane and THF. Further comparison of theoretical and experimental results for gas-phase Li(+)-THF and Li(+)-DME complexes has enabled a discussion on computational errors for entropic contributions in THF. The value for the release of a THF solvent molecule is proposed to be DeltaS approximately 23 eu. These results provide new insights to the aggregation of organolithium compounds in solution and will be useful for the investigation of other systems.     

The effect of coordinating and non-coordinating additives on the transport properties in ionic liquid electrolytes for lithium batteries

In the present study we expand our analysis of using two contrasting organic solvent additives (toluene and THF) in an ionic liquid (IL)/Li NTf(2) electrolyte. Multinuclear Pulsed-Field Gradient (PFG) NMR, spin-lattice (T(1)) relaxation times and conductivity measurements over a wide temperature range are discussed in terms of transport properties and structuring of the liquid. The conductivity of both additive samples is enhanced the most at low temperatures, with THF slightly more effective than toluene. Both the anion and lithium self-diffusivity are enhanced in the same order by the additives (THF > toluene) while that of the pyrrolidinium cation is marginally enhanced. (1)H spin-lattice relaxation times indicate a reasonable degree of structuring and anisotropic motion within all of the samples and both (19)F and (7)Li highlight the effectiveness of THF at influencing the lithium coordination within these systems.     

4-Methoxy- and 4-cyano-substituted lithium aryloxides: electronic effects of substituents on aggregation

The para-substituted lithium aryloxides [{4-NC-C6H4OLi.(Pyr)2}2.Pyr] 1a, [{4-NC-C6H4OLi.(THF)2}2] 1b, [{4-MeO-C6H4OLi.Pyr}4] 2a, [4-MeO-C6H4OLi.(THF)n] 2b, [{4-NC-2,6-(t-Bu)2-C6H2OLi.(Pyr)2}infinity] 3a, [{4-NC-2,6-(t-Bu)2-C6H2OLi.(THF)2}infinity] 3b, [{4-MeO-2,6-(t-Bu)2-C6H2OLi.Pyr}2.(Pyr)2] 4a, and [4-MeO-2,6-(t-Bu)2-C6H2OLi.(THF)n] 4b were prepared by the direct deprotonation of the corresponding phenol with an alkyllithium base (BuLi or MeLi) in the appropriate solvent, either pyridine or THF. All compounds were characterized by 1H and 13C NMR spectroscopy, and the crystal structures of 1a, 1b, 2a, 3a, 3b and 4a were elucidated. The cyano derivatives 1a and 1b adopt discrete tetrasolvated Li2O2 ring dimers whereas the methoxy analogue 2a crystallizes as a tetrasolvated molecular tetramer with a pseudo cubic Li4O4 core. The sterically encumbered cyano derivatives 3a and 3b form isostructural 1D polymeric chains of monomers via bridging of the phenolate ligands through Li...NC and Li-O contacts. In comparison, the crystal structure of the methoxy counterpart 4a is a disolvated molecular Li2O2 ring dimer. Solution NMR spectroscopic studies of 1-4 in d5-pyridine and d8-THF indicate that the methoxy complexes are more highly aggregated than the cyano derivatives, consistent with the solid-state studies. Ab initio molecular orbital calculations at the HF/6-31G* level of theory indicate that the origin of the aggregation state variations between the cyano and methoxy complexes is due to electronic effects.     

Structural and rate studies of the 1,2-additions of lithium phenylacetylide to lithiated quinazolinones: influence of mixed aggregates on the reaction mechanism

The 1,2-addition of lithium phenylacetylide (PhCCLi) to quinazolinones was investigated using a combination of structural and rate studies. (6)Li, (13)C, and (19)F NMR spectroscopies show that deprotonation of quinazolinones and phenylacetylene in THF/pentane solutions with lithium hexamethyldisilazide affords a mixture of lithium quinazolinide/PhCCLi mixed dimer and mixed tetramer along with PhCCLi dimer. Although the mixed tetramer dominates at high mixed aggregate concentrations and low temperatures used for the structural studies, the mixed dimer is the dominant form at the low total mixed aggregate concentrations, high THF concentrations, and ambient temperatures used to investigate the 1,2-addition. Monitoring the reaction rates using (19)F NMR spectroscopy revealed a first-order dependence on mixed dimer, a zeroth-order dependence on THF, and a half-order dependence on the PhCCLi concentration. The rate law is consistent with the addition of a disolvated PhCCLi monomer to the mixed dimer. Investigation of the 1,2-addition of PhCCLi to an O-protected quinazolinone implicates reaction via trisolvated PhCCLi monomers.     

NMR and DFT Studies with a Doubly Labelled 15N/6Li S-Trifluoromethyl Sulfoximine Reveal Why a Directed ortho-Lithiation Requires an Excess of n-BuLi

This work shows why it is imperious to use an excess of butyllithium for a directed ortho-lithiation of a trifluoromethyl sulfoximine. The analysis of mixtures of n-BuLi and sulfoximine 1 in THF-d₈ using {¹H, ⁶Li, ¹³C, ¹⁵N, ¹⁹F} NMR experiments at low temperatures reveal that a first deprotonation occurs that leads to dimeric and tetrameric N-lithiated sulfoximine (93 : 7). Using an excess n-BuLi (5 equivalents), the second deprotonation on the ortho-position of the aromatic occurs. Six species were observed and characterized on the way. It includes three aggregates involving a sulfoximine: i) a [dilithiated sulfoximine/(n-BuLi)] dimer solvated by four molecules of THF ( Agg2 , 39 %); ii) a [dilithiated sulfoximine/(n-BuLi)₃] tetramer solvated by six molecules of THF ( Agg3 , 39 %); iii) a [dilithiated sulfoximine/(n-BuOLi)₃] tetramer solvated by four molecules of THF ( Agg1 , 22 %). A DFT study afforded optimized solvated structures for all these aggregates, fully consistent with the NMR data.     

Lithium amidohydridoaluminates

The amidohydridometalates [Li(THF)4][HAl(NPh2)3] (1), [Li(DME)3][HAl(N(CH2Ph)2)3] (2), and [((THF)3Li)-(H2Al(NcHex2)2)].0.5toluene (3.0.5toluene; cHex = C6H11) have been prepared by reaction of the corresponding amines with LiAlH4 in THF. For 2 recrystallization from DME is required to obtain crystals, suitable for X-ray diffraction. The new compounds have been characterized by elemental analyses, IR, NMR, and MS techniques, and X-ray structure analyses. According to this the anions of 1, 2, and 3x0.5toluene possess distorted tetrahedral coordination spheres. In 3x0.5toluene a Li...H contact of 184(4) pm was detected to complete the tetrahedral coordination of the Li+ center.     

Anisole-diphenoxide ligands and their zirconium dichloride and dialkyl complexes

Linear triphenol H3[RO3] (2,6-bis(3-tert-butyl-5-methyl-2-hydroxybenzyl)-4-R-phenol; R = Me, tBu) was found to undergo selective mono-deprotonation and mono-O-methylation. Deprotonation of H3[RO3] with 1 equiv of nBuLi resulted in the formation of Li{H2[RO3]}(Et2O)2 (R = Me (1a), tBu (1b)), in which the central phenol unit was lithiated. Treatment of H3[RO3] with methyl p-toluenesulfonate in the presence of K2CO3 in CH3CN gave the corresponding anisol-diphenol H2[RO2O] (2,6-bis(3-tert-butyl-5-methyl-2-hydroxybenzyl)-4-R-anisole; R = Me (2a), tBu (2b)). Reaction of H2[RO2O] with 2 equiv of nBuLi gave the dilithiated derivatives Li2[RO2O]. The lithium salts were reacted with ZrCl4 in toluene/THF to obtain the dichloride complex [RO2O]ZrCl2(thf) (R = Me (3a), tBu (3b)). 3b underwent dimerization along with a loss of THF to generate {[tBuO2O]ZrCl2}2 (4), whereas 4 was dissolved in THF to regenerate the monomer 3b. Alkylation of 3 with MeMgBr, PhCH2MgCl, and Me3SiCH2MgCl gave [MeO2O]ZrMe2(thf) (5), [RO2O]Zr(CH2Ph)2 (R = Me (6a), tBu (6b)), and [tBuO2O]Zr(CH2SiMe3)2 (7), respectively. Reaction of 3b with LiBHEt3 produced the hydride-bridged dimer [Li2(thf)4Cl]{[tBuO3]Zr}2(micro-H)3} (8), in which demethylation of the dianionic [tBuO2O] ligand took place to give the trianionic [tBuO3] ligand. The X-ray crystal structures of 1b, 2a, 3a, 4, 6a, and 7 were reported.     

Influential role of ethereal solvent on organolithium compounds: the case of carboranyllithium

The influence of ethereal solvents (diethyl ether (Et(2)O), tetrahydrofuran (THF) or dimethoxyethane (DME)) on the formation of organolithiated compounds has been studied on the 1,2-C(2)B(10)H(12) platform. This platform is very attractive because it contains two C(c)-H adjacent units ready to be lithiated. On would expect that the closeness of both C(c)-H units would induce a higher resistance of the second C(c)-H unit being lithiated following the first lithiation. However, this is not the case, which makes 1,2-C(2)B(10)H(12) attractive to get a better understanding of the ethereal solvent influence on the lithiation process. The formation of carboranyl disubstituted species has been attributed to the existence of an equilibrium in which the carboranyl monolithiated species disproportionates into dilithium carborane and pristine carborane. The way Li(+) binds to C(c) in the carboranyl fragment and how the solvent stabilizes such a binding is paramount to drive the reaction to the generation of mono- and disubstituted carboranes. In fact, the proportion of mono- and disubstituted species is a consequence of the formation of contact ion pairs and, to a lesser extent, of separated ion pairs in ethereal solvents. All ethereal solvents generate contact ion pairs in which a large degree of covalent C(c)-Li(solvent) bonding can be assumed, according to experimental and theoretical data. Furthermore, Et(2)O tends to produce carboranyllitium ion pairs with a higher degree of contact ion pairs than THF or DME. It has been determined that for a high-yield preparation of monosubstituted 1-R-1,2-C(2)B(10)H(11), in C(c)-R (R=C, S or P) coupling reactions, the reagent type defines which is the most appropriate ethereal solvent. In reactions in which a halide is generated, as with ClPPh(2) or BrCH(2) CH=CH(2), Et(2)O appears to produce the highest degree of monosubstitution. In other situations, such as with S(8), or when no halide is generated, THF or DME facilitate the largest degree of monosubstitution. It has been shown that upon the self reaction of Li[1,2-C(2)B(10)H(11)] to produce [LiC(4)B(20)H(22)](-) the nucleophilicity of the carboranyllithium can even be further enhanced, beyond the ethereal solvent, by synergism with halide salts. The mediation of Li(+) in producing isomerizations on allyl substituents has also been demonstrated, as Et(2)O does not tend to induce isomerization, whereas THF or DME produces the propenyl isomer. The results presented here most probably can be extended to other molecular types to interpret the Li(+) mediation in C-C or other C-X coupling reactions.     

Advanced solvent signal suppression for the acquisition of 1D and 2D NMR spectra of Scotch Whisky

A simple and robust solvent suppression technique that enables acquisition of high‐quality 1D ¹H nuclear magnetic resonance (NMR) spectra of alcoholic beverages on cryoprobe instruments was developed and applied to acquire NMR spectra of Scotch Whisky. The method uses 3 channels to suppress signals of water and ethanol, including those of ¹³C satellites of ethanol. It is executed in automation allowing high throughput investigations of alcoholic beverages. On the basis of the well‐established 1D nuclear Overhauser spectroscopy (NOESY) solvent suppression technique, this method suppresses the solvent at the beginning of the pulse sequence, producing pure phase signals minimally affected by the relaxation. The developed solvent suppression procedure was integrated into several homocorrelated and heterocorrelated 2D NMR experiments, including 2D correlation spectroscopy (COSY), 2D total correlation spectroscopy (TOCSY), 2D band‐selective TOCSY, 2D J‐resolved spectroscopy, 2D ¹H, ¹³C heteronuclear single‐quantum correlation spectroscopy (HSQC), 2D ¹H, ¹³C HSQC‐TOCSY, and 2D ¹H, ¹³C heteronuclear multiple‐bond correlation spectroscopy (HMBC). A 1D chemical‐shift‐selective TOCSY experiments was also modified. The wealth of information obtained by these experiments will assist in NMR structure elucidation of Scotch Whisky congeners and generally the composition of alcoholic beverages at the molecular level.     

The reaction of TiF4 with Li(OC(CF3)2Ph): direct synthetic route to the lithium-titanium heterometallic fluoride bridged complex {Li(THF)2TiF3(OC(CF3)2Ph)2}2 and Ti(OC(CF3)2Ph)4 alkoxide

Reaction of TiF4 and LiORf (Rf = C(CF3)2Ph) in the donor solvent-THF lead to the isolation of the heterometallic lithium-titanium complex (THF)2Li(mu-F)2Ti(ORf)2(mu-F)2Ti(ORf)(2)(mu-F)2Li(THF)2 (1) and Ti(ORf)4 alkoxide (2). Interaction of TiF4 and LiORf in the non-coordinating and low polar toluene yielded only Ti(ORf)4 (2). Compounds 1 and 2 were characterized by X-ray single-crystal analysis, IR, NMR and mass spectrometry. Compound 1 is a centrosymmetric fluorine bridged dimer and contains the Li(mu-F)2Ti(mu-F)2Ti(mu-F)2Li cage. Complex 2 containing four bulky ligands is monomeric. NMR evidence is presented that the TiF4 and LiORf in THF solution gave lithium-titanium heterometallic complexes containing Li-(mu-F)-Ti and the Ti-(mu-F)-Ti bonds.     

Structural distortions and dynamic behavior of the elusive "L"-shaped cis-bicyclo[3.3.0]octenyllithium: X-ray crystallographic and NMR studies

Substituted cis-bicyclo[3.3.0]octenyllithium prepared by addition of t-BuLi to 3-methylene-1,4-cyclooctadiene in the presence of TMEDA crystallizes as a dimer with one unsolvated Li(+) sandwiched between the external faces of two allyl anions in a triple ion, and external to it the second Li(+) is bidentately complexed to TMEDA, 8. Within each allyl unit, the allyl bonds have different lengths, and all four rings deviate from coplanarity which relieves strain in the rings despite introducing partial localization of the allyl anions. A similar structure prevails in solution as shown by (7)Li NMR and the results of (7)Li{(1)H} HOESY and (1)H, (1)H NOESY experiments. Carbon-13 NMR line shape changes indicate that the system undergoes a fast allyl bond shift concerted with conformation shifts of the out of plane carbons, ca. DeltaG = 9 kcal x mol(-1). Cyclopentyllithium prepared by CH(3)Li cleavage of the trimethylstannyl derivative slowly undergoes an allowed ring opening to pentadienyllithium as well as deprotonating the solvent. The different behavior of dienylic lithium species is attributed to the relative separation of their termini.     

Deprotonation of a Seemingly Hydridic Diborane(6) To Build a B−B Bond

Deprotonation of the doubly arylene-bridged diborane(6) derivative 1 H₂ with (Me₃Si)₃CLi or (Me₃Si)₂NK gives the B−B σ-bonded species M[ 1 H] in essentially quantitative yields (THF, room temperature; M=Li, K, arylene=4,4′-di-tert-butyl-2,2′-biphenylylene). With nBuLi as the base, the yield of Li[ 1 H] drops to 20 % and the 1,1-bis(9-borafluorenyl)butane Li[ 2 H] is formed as a side product (30 %). In addition to the 1,1-butanediyl fragment, the two boron atoms of Li[ 2 H] are linked by a μ-H bridge. In the closely related molecule Li[ 3 H], the corresponding μ-H atom can be abstracted with (Me₃Si)₃CLi to afford the B−B-bonded conjugated base Li₂[ 3 ] (THF, 150 °C; 15 %). Li[ 1 H] and Li[ 2 H] were characterized by NMR spectroscopy and X-ray crystallography.     

Deprotonation of a Seemingly Hydridic Diborane(6) To Build a B−B Bond

Deprotonation of the doubly arylene‐bridged diborane(6) derivative 1 H₂ with (Me₃Si)₃CLi or (Me₃Si)₂NK gives the B−B σ‐bonded species M[ 1 H] in essentially quantitative yields (THF, room temperature; M=Li, K, arylene=4,4′‐di‐tert‐butyl‐2,2′‐biphenylylene). With nBuLi as the base, the yield of Li[ 1 H] drops to 20 % and the 1,1‐bis(9‐borafluorenyl)butane Li[ 2 H] is formed as a side product (30 %). In addition to the 1,1‐butanediyl fragment, the two boron atoms of Li[ 2 H] are linked by a μ‐H bridge. In the closely related molecule Li[ 3 H], the corresponding μ‐H atom can be abstracted with (Me₃Si)₃CLi to afford the B−B‐bonded conjugated base Li₂[ 3 ] (THF, 150 °C; 15 %). Li[ 1 H] and Li[ 2 H] were characterized by NMR spectroscopy and X‐ray crystallography.     

Solvation Effects on the Structure and Stability of Alkali Metal Carbenoids

s‐Block metal carbenoids are carbene synthons and applied in a myriad of organic transformations. They exhibit a strong structure–activity relationship, but this is only poorly understood due to the challenging high reactivity and sensitivity of these reagents. Here, we report on systematic VT and DOSY NMR studies, XRD analyses as well as DFT calculations on a sulfoximinoyl‐substituted model system to explain the pronounced solvent dependency of the carbenoid stability. While the sodium and potassium chloride carbenoids showed high stabilities independent of the solvent, the lithium carbenoid was stable at room temperature in THF but decomposed at ?10 °C in toluene. These divergent stabilities could be explained by the different structures formed in solution. In contrast to simple organolithium reagents, the monomeric THF‐solvate was found to be more stable than the dimer in toluene, since the latter more readily forms direct Li/Cl interactions which facilitate decomposition via α‐elimination.     

Mixed Aggregates of 1-Methoxyallenyllithium with Lithium Chloride

A combined computational and ¹³C NMR study was used to investigate the formation of mixed aggregates of 1-methoxyallenyllithium and lithium chloride in tetrahydrofuran (THF) solution. The observed and calculated chemical shifts, as well as the calculated free energies of mixed aggregate formation (MP2/6-31+G(d)), are consistent with the formation of a mixed dimer as the major species in solution. Free energies of mixed dimer, trimer, and tetramer formation were calculated by using the B3LYP and MP2 methods and the 6-31+G(d) basis set. The two methods generated different predictions of which mixed aggregates will be formed, with B3LYP/6-31+G(d) favoring mixed trimers and tetramers in THF solution, and MP2/6-31+G(d) favoring mixed dimers. Formation of the sterically unhindered mixed dimers is also consistent with the enhanced reactivity of these compounds in the presence of lithium chloride. The spectra are also consistent with some residual 1-methoxyallenyllithium tetramer, as well as small amounts of higher mixed aggregates. Although neither computational method is perfect, for this particular system, the calculated free energies derived using the MP2 method are in better agreement with experimental data than those derived using the B3LYP method.