Effective sorbents for solid-phase extraction in the analysis of quinolones in animal tissues by capillary electrophoresis

In this work, several commercial sorbents (Zorbax C18, Bond Elut C18, Isolute ENV+, Oasis HLB, Oasis MAX, SDB-RPS, and MPC-SD) were compared for the solid-phase extraction of the series of quinolones regulated by the European Community in chicken tissues in order to establish a method for the determination of this series of quinolones by capillary electrophoresis and diode array detection. Sorbents were chosen in order to achieve maximum recoveries and optimal clean-up efficiency. Better results were obtained using SDB-RPS and Oasis MAX which would provide suitable limits of detection, below of the maximum residue limits (MRLs) regulated.     

Simultaneous determination of iridoids, phenolic acids, flavonoids, and saponins in Flos Lonicerae and Flos Lonicerae Japonicae by HPLC-DAD-ELSD coupled with principal component analysis

A method, HPLC coupled with diode-array and evaporative light scattering detectors (HPLC-DAD-ELSD), was newly developed to evaluate the quality of Flos Lonicerae (FL) and Flos Lonicerae Japonicae (FLJ), through a simultaneous determination of multiple types of bioactive components. By employing DAD, the detection wavelengths were set at 240 nm for the determination of iridoids, 330 nm for phenolic acids, and 360 nm for flavonoids, respectively. While ELSD, connected in series after DAD, was applied to the determination of saponins. This assay was fully validated with respect to precision, repeatability, and accuracy. Moreover, principal component analysis (PCA) was used for the similarity evaluation of different samples, and it was proven straightforward and reliable to differentiate FL and FLJ samples from different origins. For PCA, two principal components have been extracted. Principal component 1 (PC1) influences the separation between different sample sets, capturing 54.598% variance, while principal component 2 (PC2) affects differentiation within sample sets, capturing 12.579% variance. In conclusion, simultaneous quantification of bioactive components by HPLC-DAD-ELSD coupled with PCA would be a well-acceptable strategy to differentiate the sources and to comprehensively control the quality of the medicinal plants FL and FLJ.     

Simultaneous determination of flavonoids in chrysanthemum by capillary zone electrophoresis with running buffer modifiers

Despite the separation efficiency of capillary electrophoresis (CE) is much higher than other chromatographic methods, it is sometimes difficult to perfectly separate the complex ingredients in biological samples. One possible and simple way to develop the separation effect in CE is to add some modifiers in the running buffer. In this paper, the suitable running buffer modifiers were explored to simultaneously separate and detect six typical flavonoids (apigenin, luteolin, kaempferol, quercetin, (+)-catechin and (−)-epicatechin) which are the main active ingredients in chrysanthemum by capillary zone electrophoresis with amperometric detection (CZE-AD). It was found that when β-cyclodextrin (β-CD) and the mixture of methanol and ethanol were used as running buffer modifiers, a baseline separation of the six analytes could be accomplished in less than 20 min and the detection limits were as low as 10⁻⁷ or 10⁻⁸ g ml⁻¹. Other factors affecting the CZE separation, such as working potential, pH value and ionic strength of running buffer, separation voltage and sample injection time were extensively investigated. Under the optimum conditions, a successful practical application on the determination of chrysanthemum samples confirmed the validity and practicability of this method.     

Determination of sulfonylurea herbicides in soil extracts by solid-phase extraction and capillary zone electrophoresis

Summary Sulfonylurea herbicides in soil extracts were concentrated using off-line solid-phase extraction (SPE), and determined by capillary zone electrophoresis (CZE) and UV detection. The method involves extraction of soils with 0.1 M NaHCO₃ solution and subsequent preconcentration by using C₁₈ cartridges prior to separation of the pesticide using CZE. The results show that a C₁₈ cartridge is suitable for the purification of sulfonylurea herbicides in soil extracts with the recoveries ranging from 65–103%. The separation conditions affecting the resolution and detection sensitivity was systematically investigated. The sulfonylureas were resolved well using 30 mM sodium acetate (NaAc)/acetic acid (HAc)+10% acetonitrile (ACN) buffer at pH 4.80. The calibration plots for the test solutes in the concentration of 0.2–50 mg L⁻¹ were linear with detection limits in the range of 0.05–0.10 mgL⁻¹. The proposed method has been successfully demonstrated for the determination of sulfonylurea herbicides in soil samples.     

Separation of flavonoids and phenolic acids from propolis by capillary zone electrophoresis

The simultaneous determination of twelve different flavonoids, pinocembrin, acacetin, chrysin, rutin, catechin, naringenin, galangin, luteolin, kaempferol, apigenin, myricetin, and quercetin, two phenolic acids, cinnamic acid and caffeic acid, and one stilbene derivative, resveratrol, in propolis extracts used in medicine has been investigated by capillary zone electrophoresis (CZE). With a buffer constituted by sodium tetraborate 30 mM, pH 9.0, and 15 kV applied voltage, the 15 polyphenols were separated on an uncoated fused-silica capillary within 40 min using normal polarity. Under the experimental conditions used, a linear relationship was calculated between the CZE migration times and the molecular weight of polyphenols' expression of the increasing amount of their hydroxyl groups and polarity. Regression equations revealed a linear relationship (correlation coefficients > 0.97) between the peak area of each polyphenol species and their concentration, from 6 to 120 ng. The levels of analytes in three different propolis extracts, ethanolic, aqueous-ethanolic and aqueous-glycolic, used to prepare various commercial medicinal products, were determined. The aqueous-ethanolic propolis extract showed a great percentage of caffeic acid, galangin, quercetin, and chrysin, whilst the ethanolic preparation was composed of a great amount of resveratrol, chrysin, and caffeic acid. On the contrary, the aqueous-glycolic propolis preparation was composed of approx. 11% of caffeic acid and a low amount of the other identified flavonoids due to the presence of approx. 85% of nonidentified compounds. CZE represents a valuable method for the qualitative and quantitative assay of the most relevant polyphenol components of propolis, representing an alternative to obtain typical fingerprints of propolis and a reliable identification of a large number of propolis polyphenolic species.     

Separation of human fibrinopeptides by capillary zone electrophoresis

We describe a method for the simultaneous determination of the five fibrinopeptide forms derived from the thrombin-promoted activation of human fibrinogen by capillary zone electrophoresis (CZE). The fibrinopeptide mixture was first desalted by a solid-phase extraction (SPE) step. The analysis was performed in reversed polarity in a highly cross-linked polyethylene glycol (PEG)-coated capillary with UV-light absorption detection at 200 nm. Several parameters including buffer concentration and pH, presence of an organic modifier, temperature, and applied voltage, have been tested. The best separations were obtained within 20 min, utilizing a 20 mM sodium phosphate buffer without organic modifier, in the narrow 6.1-6.2 pH range, at 25 degrees C, with an applied voltage of 20 kV. Quantitative analysis is made possible by the use of sheep fibrinopeptide A as an internal standard to correct for both extraction and injection errors.     

Simultaneous analysis of Cu and Pb as ABEDTA complexes in Rhizoma coptidis by capillary electrophoresis coupled with solid phase extraction

A novel capillary electrophoresis method for simultaneous determination of Cu and Pb has been developed in this paper.Cu（Ⅱ） and Pb（Ⅱ） ions were reacted with ABEDTA to form complex to achieve an ideal sensitivity of heavy metal complexes.The digestion solution of Rhizoma coptidis drug sample was purified by neutral Al₂O₃ column chromatography and the chromatographic behavior of metal-L complexes was investigated.The calibration curve was linear in the range of 5-60μg/mL for Cu²⁺ and 5-25μg/mL for Pb²⁺ with the correlation coefficients 0.9970 and 0.9972 for each（n = 5）.The average recoveries were 86.2%for Pb and 90.1%for Cu,while the relative standard deviations were 5.1%and 3.6%respectively.The method was successfully applied to determine Cu and Pb in R.coptidis drug samples.     

Simultaneous determination of nine flavonoids in Anaphalis margaritacea by capillary zone electrophoresis

A capillary zone electrophoresis method was developed for simultaneous determination of nine flavonoids, including two rare flavonols, in Tibetan medicine Anaphalis margaritacea. Baseline separation was performed at pH 9.6 with 25 mM Na₂B₄O₇ and 10 mM NaH₂PO₄ buffer solution, 20 kV as driving voltage and 275 nm as detection wavelength. Repeatability tests showed that the R.S.D. of both intra- and inter-day migration times and peak areas were less than 5%. Recovery results ranged from 87.9% to 106.1%. Samples of A. margaritacea extracts were analyzed using the validated method, which is useful for its quality control.     

Speciation analysis of mercury by dispersive solid‐phase extraction coupled with capillary electrophoresis

A pretreatment method of dispersive solid‐phase extraction (DSPE) along with back‐extraction followed by CE‐UV detector was developed for the determination of mercury species in water samples. Sulfhydryl‐functionalized SiO₂ microspheres (SiO₂−SH) were synthesized and used as DSPE adsorbents for selective extraction and enrichment of three organic mercury species namely ethylmercury (EtHg), methylmercury (MeHg), and phenylmercury (PhHg), along with L‐cysteine (L‐cys) containing hydrochloric acid as back‐extraction solvent. Several main extraction parameters were systematically investigated including sample pH, amount of adsorbent, extraction and back‐extraction time, volume of eluent, and concentration of hydrochloric acid. Under optimal conditions, good linearity was achieved with correlation coefficients over 0.9990, in the range of 4−200 μg/L for EtHg, and 2−200 μg/L for MeHg and PhHg. The LODs were obtained of 1.07, 0.34, and 0.24 μg/L for EtHg, MeHg, and PhHg, respectively, as well as the LOQs were 3.57, 1.13, and 0.79 μg/L, respectively, with enrichment factors ranging from 109 to 184. Recoveries were attained with tap and lake water samples in a range of 62.3−107.2%, with relative standard deviations of 3.5–10.1%. The results proved that the method of SiO₂−SH based DSPE coupled with CE‐UV was a simple, rapid, cost‐effective, and eco‐friendly alternative for the determination of mercury species in water samples.     

Determination of egg white lysozyme by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis - capillary zone electrophoresis method for the determination of lysozyme in selected food products is described. The optimized electrolyte system consisted of 10 mM NH(4)OH + 20 mM acetic acid (leading electrolyte), 5 mM epsilon -aminocaproic acid +5 mM acetic acid (terminating electrolyte), and 20 mM epsilon -aminocaproic acid +5 mM acetic acid +0.1% m/v hydroxypropylmethylcellulose (background electrolyte). A clear separation of lysozyme from other components of acidic sample extract was achieved within 15 min. Method characteristics, i.e., linearity (0-50 micrograms/mL), accuracy (recovery 96+/-5%), intra-assay (3.8%), quantification limit (1 microgram/ml), and detection limit (0.25 microgram/mL) were determined. Low laboriousness, sufficient sensitivity and low running costs are important attributes of this method. The developed method is suitable for the quantification of the egg content in egg pasta.     

Fast determination of flavonoids in Glycyrrhizae radix by capillary zone electrophoresis

A fast capillary zone electrophoresis (CZE) method has been developed for the determination of four flavonoids (liquiritin, licoisoflavone A, licochalconel A and calycosin) in Glycyrrhizae radix. After a series of optimization experiments, 100 mM borate buffer (pH 10.5), 30 kV applied voltage and 35 °C temperature were selected. The contents of four flavonoids in cultivated and wild crude drugs of Glycyrrhizae radix with different growth periods from one to four years, collected from different areas were successfully determined within 8 min, with satisfactory repeatability and recovery.     

Determination of oxytetracycline and some impurities in plasma by non-aqueous capillary electrophoresis using solid-phase extraction

Summary The potential of a non-aqueous, capillary electrophoresis (NACE) system for separating oxytetracycline from three of its impurities—tetracycline, 4-epioxytetracycline and 4-epitetracycline—using UV detection has been studied. The running buffer was: 25 mM sodium acetate, 1 mM EDTA, methanesulfonic acid, pH 4, dissolved in MeOH-ACN (50∶50,v/v). The method was also used to determine these compounds in pig plasma. A solid-phase extraction (SPE) procedure as a clean-up step has also developed. For this we tested Sep Pak C₁₈, LiChrolut EN and OASIS cartridges. OASIS cartridges were best. Recoveries were 90–100% for all compounds except EOTC which had a recovery of 74%.     

Combination of cationic surfactant-assisted solid-phase extraction with field-amplified sample stacking for highly sensitive analysis of chlorinated acid herbicides by capillary zone electrophoresis

This report describes a novel online field-amplified sample stacking (FASS) procedure to analyze 16 chlorinated acid herbicides. By using a poly(vinyl alcohol) (PVA)-coated capillary to reduce electroosmotic flow and introducing a methanol-water plug before sample loading, the sample injection time could be very long without loss of sample and separation efficiency. Under the optimized condition, the FASS procedure could provide great sensitivity enhancement (5000-10 000-fold) and satisfactory reproducibility (relative standard deviations of migration times less than 2.4%, relative standard deviations of peak areas less than 8.0%). Combined with cationic surfactant-assisted solid-phase extraction (CSA-SPE), the limit of detection of the herbicides ranged from 0.269 to 20.3 ppt, which are two orders lower than those of the US Environmental Protection Agency standard method 515.1. The CSA-SPE-FASS-CE method was successfully applied to the analysis of local pond water.     

Application of capillary zone electrophoresis with large-volume sample stacking to the sensitive determination of sulfonamides in meat and ground water

A CZE method with UV-Vis detection has been established and validated for the determination of nine sulfonamides: sulfapyridine, sulfamethazine, sulfamerazine, sulfamether, sulfadiazine, sulfadimethoxine, sulfamethoxazole, sulfachlorpyridazine, and sulfamethizole. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 45 mM sodium phosphate and 10% methanol at pH 7.3, with temperature and voltage of 27 degrees C and 25 kV, respectively. p-Aminobenzoic acid was used as an internal standard . Taking into account the lack of sensitivity of the UV-Vis detection, the application of an on-line preconcentration methodology, such as large-volume sample stacking with polarity switching has been proposed. This procedure combined with a solvent extraction/SPE method applied for off-line preconcentration and cleanup provides a significant improvement in the LODs, ranging from 2.59 to 22.95 mug/L for the studied compounds; the quantification of these residues being possible below the levels established by EU legislation in animal food products, such as meat. Satisfactory recoveries were also obtained in the analysis of these compounds in ground water.     

Simultaneous determination of anthraquinones in Rhubarb by pressurized liquid extraction and capillary zone electrophoresis

Rhubarb, a well-known Chinese herbal medicine, is also used in Europe and other places of the world. Anthraquinones derivatives are thought to be the major active components. A pressurized liquid extraction (PLE) and capillary zone electrophoresis (CZE) separation were developed for simultaneous determination of five anthraquinones including aloe-emodin, emodin, chrysophanol, physcion, and rhein in Rhubarb. The effects of the experimental variables on PLE and CZE have been optimized. The optimum conditions of PLE were: solvent, methanol; temperature, 140 degrees C; particle size, 0.13-0.2 mm; static extraction time, 5 min; pressure, 1500 psi; and one extraction. The best separation of the five anthraquinones could be obtained using 50 mM borate buffer (pH 8.2) containing 25% isopropyl alcohol and 25% acetontrile as modifier, while the separation voltage was 25 kV and the temperature was at 20 degrees C. The method developed is accurate, simple, and reproducible, and could be used for quality control of Rhubarb and its medical preparations.     

Combined use of supported liquid membrane and solid-phase extraction to enhance selectivity and sensitivity in capillary electrophoresis for the determination of ochratoxin A in wine

This paper proposes a novel strategy to enhance selectivity and sensitivity in CE, using supported liquid membrane (SLM) and off-line SPE simultaneously. The determination of ochratoxin A (OA) in wine has been used to demonstrate the potential of this methodology. In the SLM step, the donor phase (either a 20 mL volume of a standard solution at pH 1 or a wine sample at pH 8) was placed in a vial, where a micromembrane extraction unit accommodating the acceptor phase (1 mL water, pH 11) in its lumen was immersed. The SLM was constructed by impregnating a porous Fluoropore Teflon (PTFE) membrane with a water-immiscible organic solvent (octanol). In the off-line SPE step, the nonpolar sorbent (C-18, 4 mg) selectively retained the target ochratoxin, enabling small volumes of acceptor phase (1 mL) to be introduced. The captured analytes were eluted in a small volume of methanol (0.1 mL). This procedure resulted in sample cleanup and concentration enhancement. The method was evaluated for accuracy and precision, and its RSD found to be 5%. The LODs for OA in the standard solutions and wine samples were 0.5 and 30 microg/L, respectively. The results obtained demonstrate that SLM combined with off-line is a good alternative to the use of immunoaffinity columns prior to CE analysis.     

Qualitative and quantitative analysis of iridoid glycosides in the flower buds of Lonicera species by capillary high performance liquid chromatography coupled with mass spectrometric detector

A highly sensitive and specific method, based on capillary high performances liquid chromatography coupled with single quadrupole mass spectrometry using electrospray ionization (capillary HPLC-ESI/MS), is proposed for the identification and quantification of iridoid glycosides in the flower buds of five Lonicera species. A Zorbax SB-C18 (0.3 mm × 150 mm, 5 μm) capillary column and a gradient elution with methanol-acetonitrile-aqueous acetate acid were utilized. The most intensive electrospray ionisation signals were found in the negative ion spectra owing to CH₃COO⁻ adducts. Eight iridoid glycosides derived from the flower buds of Lonicera species were analyzed by mass spectrometry: sweroside (IG1), 7-O-ethyl sweroside (IG2), 7-epi vogeloside (IG3), secoxyloganin (IG4), secoxyloganin 7-butyl ester (IG5), dimethyl-secologanoside (IG6), centauroside (IG7), and loganin (IG8) using combined information on retention time, the molecular ion mass and fragment ion masses. Detection limits were lower than 1.9 ng/mL in selected ion monitoring (SIM) mode and all calibration curves showed good linear regression (r² > 0.9938) within test ranges. The validated method was successfully applied to analyze eight iridoid glycosides in the flower buds of five Lonicera species and provided a new basis of assessment on quality of Flos Lonicerae.     

区带毛细管电泳法分离测定洋金花中莨菪烷类生物碱

采用区带毛细管电泳法分离测定洋金花中3种莨菪烷类生物碱—阿托品、山莨菪碱和东莨菪碱。以57 cm×50μm熔融石英毛细管为分离通道,工作电压25 kV,温度25℃,200 mmol/L Tris-H3PO4(pH=8.3)为背景电解质。经优化分离条件,3种莨菪烷类生物碱达到基线分离,此方法快速、简便,可作为中药材洋金花中有效成分分离的方法和质量控制方法。     

Analytical potential of enzyme-coated capillary reactors in capillary zone electrophoresis

Enzymes immobilized on the inner surface of an electrophoretic capillary were used to increase sensitivity and resolution in capillary zone electrophoresis (CZE). Sensitivity is enhanced by inserting a piece of capillary containing the immobilized enzyme into the main capillary, located before the detector, in order to transform the analyte into a product with a higher absorptivity. This approach was used to determine ethanol. In order to improve resolution, capillary pieces containing immobilized enzymes were inserted at various strategic positions along the electrophoretic capillary. On reaching the enzyme, the analyte was converted into a product with a high electrophoretic mobility, the migration time for which was a function of the position of the enzyme reactor. This approach was applied to the separation and determination of acetaldehyde and pyruvate. Finally, the proposed method was validated with the determination of ethanol, acetaldehyde, and pyruvate in beer and wine samples.     

Determination of quinolones in milk samples using a combination of magnetic solid-phase extraction and capillary electrophoresis

A magnetic solid-phase extraction (MSPE) method combined with capillary electrophoresis for the simultaneous determination of seven quinolones (QNs) (danofloxacin, ciprofloxacin, marbofloxacin, enrofloxacin, difloxacin, oxolinic acid, and flumequine), using (S)-(+)-6-methoxy-α-methyl-2-naphthaleneacetic acid as internal standard, in milk samples was developed. The variables involved in the preconcentration magnetic procedure were: the composition of the magnetic support composition, the sample pH, and the weight of magnetic adsorbent used. The variables were optimized using a simplex-lattice design. Different magnetite covered with octyl-phenyl silica adsorbents were synthesized by varying the molar ratio of phenyltrimethylsilane and octyltrimethoxysilane; the solids were evaluated for QN preconcentration. Under optimal conditions, a linear range was obtained from 27 to 1000 μg L(-1) with limits of detection ranging from 9 to 12 μg L(-1) for the seven QNs. The absolute recoveries of the seven QNs at three different spiked levels (40, 150, and 400 μg L(-1) ) ranged from 74% to 98% with a relative standard deviation less than 10% in all cases. The proposed method was applied to analyze 20 whole milk samples of different brands. All samples were positive for the presence of QN residues; in some cases, extract dilution was required. The concentrations found are in the range from 31.1 to 5047.3 μg L(-1) . Marbofloxacin was the most frequently found. The method proposed offers advantages in terms of simplicity, sensitivity, efficiency, cost, and analysis time making it an alternative for the analysis of QNs in whole milk samples.