Gas-phase reactions of halogenated radical carbene anions with sulfur and oxygen containing species

The reactivities of mono- and dihalocarbene anions (CHCl⁻, CHBr⁻, CF₂⁻, CCl₂⁻, and CBrCl⁻) were studied using a tandem flowing afterglow-selected ion flow tube instrument. Reaction rate constants and product branching ratios are reported for the reactions of these carbene anions with six neutral reagents (CS₂, COS, CO₂, O₂, CO, and N₂O). These anions were found to demonstrate diverse chemistry as illustrated by formation of multiple product ions and by the observed reaction trends. The reactions of CHCl⁻ and CHBr⁻ occur with similar efficiencies and reactivity patterns. Substitution of a Cl atom for an H atom to form CCl₂⁻ and CBrCl⁻ decreases the rate constants; these two anions react with similar efficiencies and reactivity trends. The CF₂⁻ anion displays remarkably different reactivity; these differences are discussed in terms of its lower electron binding energy and the effect of the electronegative fluorine substituents. The results presented here are compared to the reactivity of the CH₂⁻ anion, which has previously been reported.     

Mechanistic analysis and thermochemical kinetic simulation of the products from pyrolysis of poly(α-methylstyrene), especially the unrecognized role of phenyl shift

Mechanisms for pyrolysis of poly(α-methylstyrene) must rationalize high selectivity for monomer formation, negligible formation of volatile oligomers, and notably slow decrease in molecular weight compared with the rate of weight loss, i.e., unzipping dominates both back-biting and transfer. Backbone homolysis should form both a tert-benzylic radical R_tb and a prim radical R_p, with formation of the latter potentially supplemented in chain propagation steps emanating from the former. Hence product-forming pathways characteristic of each are expected to compete. Simulations of initial product distributions based on assigned rate constants for chain propagation steps indicate that R_tb is indeed predicted to efficiently unzip with minimal transfer or back-biting. However, R_p is predicted to give comparable amounts of transfer and back-biting with minimal unzipping, behavior inconsistent with experimental data. The proposed escape from this impasse is a previously unrecognized pathway, 1,2-phenyl shift in R_p to form a tert radical. If it undergoes β-scission, the net result is an inter-conversion of R_p to R_tb. Quantitative simulations suggest that this sequence is indeed highly competitive with other reactions of R_p and thus efficiently subverts the otherwise expected propagation of chains emanating from R_p.     

On the mechanism of the photoinduced reduction of an adduct of ferricytochrome C with a poly(4-vinylpyridine) polymer containing –Re (CO)3(3,4,7,8-tetramethyl-1,10-phenanthroline) pendants

Changes in the UV–vis absorption spectrum revealed the formation of adducts between the Re^I polymer and ferricytochrome C, Fe^III-Cyt c. Different morphologies for the Re^I polymer and the adducts formed between the Re^I polymer and Fe^III-Cyt c were observed by TEM. The reduction of the Re^I chromophores in the polymer, achieved by the reductive quenching of the MLCT excited state of the Re^I polymer by triethylamine (TEA) and/or by the reaction between e⁻_solv and {[(vpy)₂vpyRe^I(CO)₃(tmphen)⁺]}_n200 in pulse radiolysis experiments, produces –Re^I(CO)₃(tmphen) and –Re^I(CO)₃(tmphenH)⁺ as the main species. The reductive quenching of the MLCT of the Re^I polymer by TEA was followed by a rapid electron transfer from the –Re^I(CO)₃(tmphen) to the Fe^III center in the heme to produce ferrocytochrome C, Fe^II-Cyt c.     

Photocycle dynamics of the E149A mutant of cryptochrome 3 from Arabidopsis thaliana

The E149A mutant of the cryDASH member cryptochrome 3 (cry3) from Arabidopsis thaliana was characterized in vitro by optical absorption and emission spectroscopic studies. The mutant protein non-covalently binds the chromophore flavin adenine dinucleotide (FAD). In contrast to the wild-type protein it does not bind N5,N10-methenyl-5,6,7,8-tetrahydrofolate (MTHF). Thus, the photo-dynamics caused by FAD is accessible without the intervening coupling with MTHF. In dark adapted cry3-E149A, FAD is present in the oxidized form (FAD_ox), semiquinone form (FADH), and anionic hydroquinone form (FAD_redH⁻). Blue-light photo-excitation of previously unexposed cry3-E149A transfers FAD_ox to the anionic semiquinone form (FAD⁻) with a quantum efficiency of about 2% and a back recovery time of about 10 s (photocycle I). Prolonged photo-excitation leads to an irreversible protein re-conformation with structure modification of the U-shaped FAD and enabling proton transfer. Thus, a change in the photocycle dynamics occurs with photo-conversion of FAD_ox to FADH, FADH to FAD_redH⁻, and thermal back equilibration in the dark (photocycle II). The photocycle dynamics of cry3-E149A is compared with the photocycle behaviour of wild-type cry3 and other photo-sensory cryptochromes.     

Magnetic field effect on chemical compositions of spherical Fe/Co fine particles synthesized from a gaseous mixture of iron pentacarbonyl and cobalt tricarbonyl nitrosyl

Under UV light irradiation on a gaseous mixture of Fe(CO)₅ and Co(CO)₃NO, both the crystalline deposits with sizes of 5 and 18 μm and the spherical particles with a mean diameter of 0.3 μm were produced. From FT-IR spectra and SEM–EDS analysis, it was suggested that the chemical structure of the crystalline deposits was the one of Fe₂(CO)₉ being modified by involving Fe(CO)Co bond. By decreasing a partial pressure of Fe(CO)₅ to 0.5 Torr in the gaseous mixture, only the spherical aerosol particles could be produced. Chemical composition of the particles was rich in Co species. From the disappearance of bridging CO band in the FT-IR spectra of the particles and the appearance of CO bands coordinated to a metal atom, Fe atom in Fe(CO)₄ was suggested to be coordinated by the O atom in bridging CO bond in Co(CO)Co structure and/or in α-diketone structure which was formed from two CO groups in dicobalt species. Chemical compositions of the crystalline deposits and the spherical particles were influenced differently by the application of a magnetic field. Atomic ratio of Fe to Co atom decreased in the crystalline deposits whereas it increased in the spherical particles with increasing magnetic field up to 5 T. Linearly aggregated particles (i.e., particle wires) as long as 30 μm were produced on the front side of a glass plate placed at the bottom of the irradiation cell.     

Vibrational satellite of Na(3d ← 3s) dipole-forbidden transition in Na/CF4 mixture

Excitation spectra of Na fluorescence in mixtures with CF₄ display a new band shifted by the energy of one-vibrational quantum of the IR active ν₃-mode of CF₄ (1281 cm⁻¹) from Na 3d states. This band is attributed to a Na(3s)CF₄(ν₃ = 0) → Na(3d)CF₄(ν₃ = 1) transition and its intensity is explained by coupling with Na(4p)CF₄(v₃ = 0) resonance state which lies  180 cm⁻¹ below in energy. An analogous satellite of the Na 6p state combined with the same vibration and lying close to the Na 7p state is reported and discussed.     

Synthesis and chemical oxidation of 3-ferrocenylpyrrole and ferrocenyl-substituted triazoles: Iron versus ligand based oxidation

Copper catalyzed [3+2] cycloaddition reactions between ethynylferrocene and benzylazides yields 1-benzyl-4-ferrocenyl-1,2,3-triazoles (2–5). Reaction between phenylacetylene and azidoferrocene yields 1-ferrocenyl-4-phenyl-1,2,3-triazole (6). Anodic electrochemistry of 2–6 suggests reversible oxidation at potentials more positive than ferrocene. Chemical oxidation of 2 and 3-ferrocenylpyrrole (1) with dichlorodicyanoquinone (DDQ) yields the salts [2⁺] [DDQ⁻] and [1⁺] [DDQ⁻], respectively. ⁵⁷Fe Mössbauer spectroscopy reveals the presence of low-spin Fe^II in [1⁺][DDQ⁻] while Fe^II is oxidized to low-spin Fe^III in [2⁺][DDQ⁻]. Magnetization measurements indicate that [1⁺][DDQ⁻] is paramagnetic and cannot be viewed as a simple neutral charge transfer complex reminiscent of the mixed stack diamagnetic [ferrocene]⁰[TCNE]⁰.     

H NMR Dynamic study of thermal Z/E isomerization of 5-substituted 2-alkylidene-4-oxothiazolidine derivatives: Barriers to rotation about CC bond

The rotational barriers between the configurational isomers of two structurally related push–pull 4-oxothiazolidines, differing in the number of exocyclic CC bonds, have been determined by dynamic ¹H NMR spectroscopy. The equilibrium mixture of (5-ethoxycarbonylmethyl-4-oxothiazolidin-2-ylidene)-1-phenylethanone (1a) in CDCl₃ at room temperature to 333 K consists of the E- and Z-isomers which are separated by an energy barrier ΔG^# 98.5 kJ/mol (at 298 K). The variable-temperature ¹H NMR data for the isomerization of ethyl (5-ethoxycarbonylmethylidene-4-oxothiazolidin-2-ylidene)ethanoate (2b) in DMSO-d₆, possessing the two exocyclic CC bonds at the C(2)- and C(5)-positions, indicate that the rotational barrier ΔG^# separating the (2E,5Z)-2b and (2Z,5Z)-2b isomers is 100.2 kJ/mol (at 298 K). In a polar solvent-dependent equilibrium the major (2Z,5Z)-form (>90%) is stabilized by the intermolecular resonance-assisted hydrogen bonding and strong 1,5-type S · · · O interactions within the SCCCO entity. The ¹³C NMR Δδ_C(2)C(2′) values, ranging from 58 to 69 ppm in 1a–d and 49-58 ppm in 2a–d, correlate with the degree of the push-pull character of the exocyclic C(2)C(2′) bond, which increases with the electron withdrawing ability of the substituents at the vinylic C(2′) position in the following order: COPh COEt > CONHPh > CONHCH₂CH₂Ph. The decrease of the Δδ_C(2)C(2′) values in 2a–d has been discussed for the first time in terms of an estimation of the electron donor capacity of the S fragment on the polarization of the CC bonds.     

Molecular structure and conformation of diethylmethylamine determined by gas electron diffraction and vibrational spectroscopy combined with theoretical calculations

We have investigated the molecular structure and conformation of diethylmethylamine, C(4)H₃C(2)H₂N(1)[CH₃]C(3)H₂C(5)H₃, by gas electron diffraction and vibrational spectroscopy with the aid of theoretical calculations. Diffraction data are consistent with a conformational mixture of 35(14)% tt + 27(14)% g⁺t + 20(17)% g⁻t + 18(23)% g⁺g⁺ where the numbers in parentheses denote three times the standard errors (3σ). Normal-coordinate analysis based on B3LYP/6-311+G^** calculations supports the existence of the four conformers. The dihedral angle ₁(C4C2N1C3) (= −₂(C5C3N1C2)) of the tt conformer was 170(4)° whereas the ₁ and ₂ values of the other conformers were fixed at the B3LYP/6-311++G(2df,p) values: 72.4° and −163.3° for the g⁺t, −66.0° and −158.2° for the g⁻t, and 60.3° and 63.5° for the g⁺g⁺. Average values of the structural parameters (r_g/Å and _α/°) with 3σ are: r(N–C) = 1.462(2), r(C–C) = 1.523(3), r(C–H) = 1.113(2), CNC = 111.6(5), NCC = 114.5(5), NCH/CCH_Me = 110.6(5).     

Effects of some factors during electrochemical degradation of phenol by hydroxyl radicals

Hydroxylation of aromatic compounds has been used extensively as a measure of hydroxyl radicals (OH) formation. In this paper, salicylic acid (2-HBA) was used to trap OH in the process of electrolysis with a couple of Ti-base lead dioxide electrodes in different conditions. Aqueous solution of 2-HBA, a couple of Ti-base lead dioxide electrodes and an AC power were used in the course of OH formation, and then the solution containing 2-HBA and 2,5-dihydroxybenzoic acid (2,5-DHBA) was analyzed by High Performance Liquid Chromatography (HPLC) with fluorescence detector. This method can help us to better understand the reaction mechanism of OH from the viewpoint of quantity.In the same conditions of electrolysis, Total Organic Carbon (TOC) of phenol solutions were detected to identify the effects of some factors during this electrochemical process, because the strong oxidation ability of OH can mineralize the organic pollutants totally and finally achieve the goal of water treatment. The results show that high pH value of electrolyte and high frequency of the AC power are favorable for the generation of OH, however, CO₃²⁻ is opposite to them.     

A DFT study on the mechanism of the gas phase reaction of ground-state Y (4d5s,D) with 2-butyne

The reaction of ground-state Y with 2-butyne has been investigated in detail using B3LYP method. Four pathways for elimination of H₂ were identified. Two isomers, Y(HCCC)CH₃ and Y(H₂CCCCH₂) were assigned to the observed product, YC₄H₄. The calculated PESs suggest that the concerted H₂-elimination leading to Y(H₂CCCCH₂) + H₂ product is the most favorable pathway. For the elimination of CH₃, combining the results of this work with our previous study on Y + propyne reaction, a general mechanism for the reactions of Y with 2-alkynes bearing RCCCH₃ structure was established: Y + RCCCH₃ → π-complex → TS(H-migration) → HY(CH₂CC)R → TS (CC insertion) → (CH₂)HYCCR → TS(H-migration) → H₃CYCCR → CH₃ + YC₂R. Such mechanism was found to be always energetically more favorable than the direct sp–sp³ CC bond insertion mechanism. Further, such mechanism can also be applied to the elimination of CH₄ and it can be described as: Y + CH₃CCCH₃ → π-complex → TS (H-migration) → HY(H₂CCC)CH₃ → TS(CC insertion) → (H₂CCC)HYCH₃ → TS(H-migration) → CH₄ + YC₃H₂.     

Molecular fine structure and transition dipole moment of NO2 using an external cavity quantum cascade laser

Rotational vibrational fine structure and transition dipole moment of NO₂ is measured using Doppler free saturation spectroscopy with an external grating cavity quantum cascade laser (QCL). The QCL wavelength is calibrated using a 310 cm long internally coupled Fabry–Perot interferometer. We obtain a frequency splitting of 139.68 ± 0.06 MHz (0.0047 cm⁻¹) between the spin doublets (17) of 000 → 001 transition of NO₂. The resolution of the QCL based saturation spectrometer is limited by the QCL linewidth of 3.99 MHz ( 0.00013 cm⁻¹) deduced from the half width of the Lamb dips. The Lamb dip spectroscopy is utilized to obtain a vibrational dipole moment of 0.37 Debye for the (17) transitions.     

Photodegradation of poly(neopentyl isophthalate) part I: Laboratory and outdoor conditions

In this paper the mechanisms of photodegradation of poly(neopentyl isophthalate) (PNI) in laboratory (Suntest XXL+, λ > 300 nm) and outdoor conditions are compared. Changes in the chemical composition were studied with ATR-FTIR, SEC and MALDI-ToF MS. Furthermore, the results were compared with data presented in our previous paper on PNI coatings that were aged in the UVACUBE (λ > 254 nm). Two main aspects of photodegradation of PNI are addressed in the present paper: the influence of different wavelengths and the comparison of laboratory and outdoor exposure regarding the mechanism of degradation. Under short (λ > 254 nm) and long (λ > 300 nm) wavelength irradiation similar products of degradation are formed. However, the presence of short wavelength radiation dramatically accelerates the overall rate of photodegradation of PNI. UV light absorption calculations confirm this experimentally found acceleration. Exposure of PNI in laboratory and outdoor conditions, both with wavelengths λ > 300 nm resulted in similar degradation products in the initial stage of ageing.     

Unimolecular chemistry of metastable dimethyl isophthalate radical cations

The MS/MS spectrum of the metastable molecular ions of dimethyl isophthalate 1 differs from that of the isomeric dimethyl terephthalate 2 by the observation of, inter alia, a quite intense loss of C,H₂,O ascribed to formaldehyde. Results obtained using a combination of mass spectrometry techniques suggest that this process could consist of an isomerization reaction of the molecular ion into an ion–neutral complex (INC) linking a benzoyl radical and neutral formaldehyde to a proton [ArCOHOCH₂]⁺. Within the complex, a proton transfer catalyzed by formaldehyde occurs resulting in the production of an ionized cyclohexadienylidene methanone (ketene) structure.     

Scavenging of and OH radicals in concentrated HCl and NaCl aqueous solutions

In neutral and acidic aqueous solutions containing 2 mol L⁻¹ of Cl⁻, the decay of the solvated electron and the formation of ClOH⁻ and were studied by picosecond pulse radiolysis experiment. The rate constant for the reaction of and H₃O⁺ is 1.3 × 10¹⁰ L mol⁻¹ s⁻¹. The yield of the OH radical at 100 ps is estimated to be 5.0 × 10⁻⁷  mol  J⁻¹.     

Effects of dipole interaction and solvation on the CO stretching band of N,N-dimethylacetamide in nonpolar solutions: Infrared, isotropic and anisotropic Raman measurements

The concentration dependence of the CO stretching (ν_CO) band of N,N-dimethylacetamide (NdMA) in cyclohexane, n-hexane, and CCl₄ has been investigated by infrared (IR) and polarized Raman spectroscopy. For the neat liquid of NdMA, the noncoincidence of the aniso- and isotropic Raman wavenumbers is evident. In the 0.47 M cyclohexane solution of NdMA, the noncoincidence effect almost disappears and the ν_CO envelopes in both the Raman and IR spectra are asymmetric to the low-wavenumber side. When the concentration of NdMA decreases from 0.33 to 0.023 M, the peak of these bands slightly shifts to a higher wavenumber and the band shape becomes symmetric. The shape of the ν_CO envelope does not show any significant change below 0.023 M. These results suggest that the asymmetric shape of the ν_CO band observed for the 0.33 M cyclohexane solution is associated with the intermolecular interaction among NdMA molecules, which vanishes at around 0.02 M. Spectral changes for the CCl₄ solution of NdMA show a similar tendency. However, the shape and peak wavenumber of the ν_CO band observed in a highly diluted CCl₄ solution (≤0.023 M) indicate that the solvation effect of CCl₄ is more complicated than those of cyclohexane and n-hexane. The analyses of the ν_CO band, which is sensitive to the intermolecular interaction between solutes and between solute and solvent for NdMA dissolved in nonpolar solvents, would serve to clarify the electronic property of the molecule in a solution.     

A new cataluminescence sensor for carbon tetrachloride using its catalytic reduction by hydrogen on palladium/carbon surface

A new cataluminescence (CTL) sensor was developed based on the chemiluminescence (CL) emission from the catalytic hydrodechlorination of carbon tetrachloride on the surface of palladium/carbon catalyst. The factors influencing the CTL signal, such as the catalyst, carrier gas, gas flow rate, temperature and the CL wavelength, were investigated in detail. Under the optimal conditions, the linear range of the CTL intensity versus concentration of carbon tetrachloride was 4.7–235 μg/mL (R = 0.9944, n = 7), with a limit of detection of 0.7 μg/mL (σ = 3). GC/MS results suggest that the possible CTL mechanism of the reduction is the formation of CCl₃ radicals. The CCl₃ radicals combine with H free atoms or capture hydrogen atoms from H₂ molecules to form excited CHCl₃ intermediates, which decay from the excited-state to the ground giving CTL emission for the detection. It is also found that some benzene derivatives with α-H of branched-chain, such as toluene, ethylbenzene and xylenecan, can play a role of catalyst in the reaction.     

Nucleophilic destruction of organophosphate toxins: A computational investigation

Computed reaction enthalpies, free energies, and activation barriers in vacuo are presented for the nucleophilic detoxification of the organophosphorus compounds (H)(HO)P(O)F, (H)(H₃CO)P(O)F and (H₃C)(CH(CH₃)₂O)P(O)F via the reaction R₁OH + (R₂)(R₃O)P(O)F → (R₂)(R₃O)P(O)(OR₁) + HF for a wide variety of R₁OH nucleophiles. Density functional theory at the B3LYP/6-311++G(d,p) computational level was employed for all the calculations. A multi-step Wright-type reaction mechanism [J. B. Wright, W.E. White, J. Mol. Struct. (THEOCHEM) 454 (1998) 259], which proceeds via a proton transfer from the nucleophile to the fluorine atom through the phosphinyl oxygen atom, was consistently found to have a lower activation barrier in the gas-phase than for the corresponding mechanism that operates via a proton transfer from the nucleophile directly to the fluorine atom. Of the nucleophilic agents investigated, peroxybenzoic acid and o-iodosobenzoic acid had the lowest classical activation barrier for the Wright-type mechanism.     

Enhanced tungstate electrochromism via formation of transparent conductive networks

Indium tin oxide (ITO) nanopowder was added to a polymer film containing WO₃ · H₂O particles to enhance electron conductivity and complimentary Li ion kinetics in an electrochromic device. Film conductivity increased dramatically with ITO content, suggesting the formation of conductive ITO networks in the film. The improved electron conductivity leads to a substantial increase of the effective Li⁺ ion diffusion coefficient in the composite film, from 10⁻¹¹ to 10⁻⁹ cm²/s. Electrochromic contrast studies revealed that the presence of the ITO networks leads to enhanced blue/green color contrast.     

Electrochemical properties of polyaniline in p-toluene sulfonic acid solution

Polyaniline was deposited potentiodynamically on a stainless steel substrate in the presence of an inorganic acids (sulfuric acid). The electrochemical characterization of the electrode was carried out by means of cyclic voltammetry and electrochemical impedance spectroscopy in the organic acids (p-toluene sulfonic acid) solution. The results show that polyaniline has a high specific capacitance of 431.8 F g⁻¹ at 1 mV s⁻¹, high coulombic efficiency of 95.6% at 20 mV s⁻¹, and exhibits a high reversibility. This indicates the promising feasibility of the polyaniline used as an electrochemical capacitor material in the electrolyte of p-toluene sulfonic acid solution especially at high charge–discharge process.