Trans ligand influence in cobalt(III) Schiff base complexes: Electronic and steric effects on the kinetics of hydrolysis

Rate constants for the hydrolysis (k_h) of six different amines in trans‐[Co((BA)₂en)(amine)₂]ClO₄ complexes (amine = aniline 1a , para‐toluidine 1b , benzylamine 1c (primary amines), pyrrolidine 2a , piperidine 2b , morpholine 2c (secondary amines), and (BA)₂en = Bisbenzoylacetoneethylenediiminato) in mixed methanol/water (1:1) solvent have been determined between 30 and 55°C. The hydrolysis product of 2c , trans‐[Co((BA)₂en)(morpholine)(H₂O)]ClO₄, has been separately prepared and characterized by UV–vis and ¹H NMR spectroscopy. Depending on the nature of the axial amine ligand the limiting first‐order rate constants for the amine hydrolysis at 40°C range from (3.42 ± 0.10) × 10^?5 to (5.32 ± 0.13) × 10^?5 s^?1. At the first glance, a reasonable trend cannot be established between k_h and the basicity or the inductive trans effect of the amine ligands. However, when the complexes are classified into two groups, based on the type of the amine (primary and secondary), the values of k_h correlate well with the basicity or inductive effect of the amine in each group. The observed trend in k_h values for the complexes with primary amines is 1a (5.32 ± 0.13) × 10^?5 s^?1 > 1b (3.51 ± 0.14) × 10^?5 > 1c (1.72 ± 0.03) × 10^?5 (40°C), which is opposite to the amine basicity strength. In the case of the complexes with secondary amines, the observed trend in k_h values is in accord with amine basicity (or inductive trans effect), i.e. 2a (5.02 ± 0.22) × 10^?5 > 2b (4.18 ± 0.10) × 10^?5 > 2c (3.42 ± 0.10) × 10^?5 s^?1 (40°C). © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 387–393, 2002     

Investigation of the competitive rate of derivatization of several secondary amines with phenylisocyanate (PHI), hexamethylene-1,6-diisocyanate (HDI), 4,4'-methylenebis(phenyl isocyanate) (MDI) and toluene diisocyanate (TDI) in liquid medium

The stabilization of the isocyanate (NCO) groups during workplace sampling is necessary for their subsequent laboratory analysis. Most derivatization reagents are secondary amines. By carrying out a test in which two secondary amines are added to an isocyanate, the relative rates of these reactions can be evaluated. This evaluation is known for a monoisocyanate, phenylisocyanate (PHI), but is being developed for diisocyanates. This study deals with the relative reactivity (RR) of four diisocyanates: hexamethylene 1,6-diisocyanate (HDI), 4,4'-methylenebis(phenyl isocyanate) (MDI), and the ortho and para isomers of toluene diisocyanate (TDI) in addition to PHI, with four secondary amines: 1-(2-methoxyphenyl)piperazine (MOPIP), 9-(N-methylaminomethyl)anthracene (MAMA), 1-(9-anthracenylmethyl)piperazine (MAP), and dibutylamine (DBA). These competitive derivatization reactions are studied in three reaction solvents, namely acetonitrile, toluene, and acetonitrile doped with water (1% v/v). The results show that the order of reactivity, which doesn't change with the isocyanate as well as with the solvent used, is the following: DBA > MAP > MOPIP > MAMA. The relative difference in reactivity is a function of both the isocyanate and the solvent used. Hindered aromatic diisocyanates (TDI and MDI) show a greater difference in reactivity with the derivatization agents. These differences in reactivity are also modified by the solvent used. For example, larger differences are observed in acetonitrile than in toluene, but the introduction of water to acetonitrile, which does not affect the reaction yield, makes these differences smaller.     

Solvent effects in the interaction of methyl-beta-cyclodextrin with solvatochromic merocyanine dyes

The UV-vis spectroscopic behavior of dyes: 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (1) and 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2) was investigated in solutions of methyl- beta-cyclodextrin (methyl-beta-CyD), using water, methanol, ethanol, propan-2-ol, butan-1-ol, acetone, acetonitrile, N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N,N-dimethylacetamide (DMA), chloroform and dichloromethane as solvents. In aqueous solutions of dye (2) the addition of M-beta-CD leads to a bathochromic shift (of the maximum absorption), showing that the probe was transferred to a microenvironment of lower polarity and suggesting the formation of a 1 : 1 dye (2) : CyD inclusion complex, with a binding constant of 128.5 +/- 3.5 dm(3) mol(-1). Data for dye 2 in alcohols showed hypsochromic shifts, which increased in the following order: methanol < ethanol < propan-2-ol < butan-1-ol. These observations appear to reflect dye-solvent interactions through hydrogen bonding. If dye-solvent interactions are strong, the CyD-dye interactions are consequently weak, but the latter increase in importance when the dye-solvent interaction becomes weaker. With hydrogen-bond accepting solvents, data for both dyes showed clearly increasing hypsochromic shifts following the order: DMSO < DMA < DMF < acetone < acetonitrile. This order is exactly the inverse of the increasing order of basicity of the medium. This indicates that the dominant factor for the observed effects in these solvents is the solvent-CyD interaction through hydrogen bonding involving the hydroxyl groups of the CyD and the basic groups of the solvents. These interactions diminish in intensity if the basic character of the medium is reduced, increasing the capability of the dye to interact with the CyD using its phenoxide donor moiety. The largest hypsochromic shifts were obtained in chloroform (66.0 nm) and dichloromethane (67.5 nm) with dye after addition of methyl-beta-CyD. In these specific situations, solvents display weak basic and acid properties, that enhanced CyD-dye interactions to such an extent that association complexes formed through hydrogen bonding could be detected (K11) values of 24.8 +/- 4.9 dm3 mol(-1) in dichloromethane and 66.1 +/- 8.0 dm3 mol(-1) in chloroform).     

Michael addition polymerizations of difunctional amines (AA′) and triacrylamides (B3)

Novel hyperbranched poly(amido amine)s containing tertiary amines on the backbones and acryl or secondary amines as the surface groups were successfully synthesized via the Michael addition polymerizations of a triacrylamide [1,3,5‐triacryloylhexahydro‐1,3,5‐triazine (TT)] and a difunctional amine [n‐butylamine (BA)] NMR techniques were used to clarify the structures of hyperbranched polymers and polymerization mechanism. The reactivity of the secondary amine formed in situ was much lower than that of the primary amines in BA. When the feed molar ratio was 1:1 TT/BA, the secondary amine formed in situ was almost kept out of the reaction before the BA (AA′) and TT (B₃) monomers were consumed, and this led to the formation of A′B₂ intermediates containing one secondary amine group and two acryl groups. The self‐polymerization of the A′B₂ intermediates produced hyperbranched polymers bearing acryl as surface groups. For the polymerization with the feed molar ratio of 1:2 TT/BA, A′₂B intermediates containing one acryl group and two secondary amine groups were accumulated until self‐polymerization started; the self‐polymerization of the intermediates formed hyperbranched polymers with secondary amines as their surface groups. Modifications of surface functional groups were studied to form new hyperbranched polymers. The hyperbranched poly(amido amine)s were amorphous. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6226–6242, 2006     

Oxidation state and proton doping level in copolymers of 2-aminobenzoic acid and 2-methoxyaniline

UV-vis spectra of homopolymers and copolymers of 2-aminobenzoic acid (OAB) and 2-methoxyaniline (OMA) were analyzed in order to obtain information about the oxidation state and proton doping level of these polymers. Dimethyl sulfoxide (DMSO) was used as a solvent in which protonated forms of polyanilines are preserved and a mixture of N-methyl-2-pyrrolidone and triethylamine (0.5 %) as a solvent (NMP/TEA) in which polyanilines are assumed to be non-protonated. Polymers were prepared in the emeraldine salt form, externally doped with HCl. It was found that only external doping is eliminated in NMP/TEA while internal doping by carboxylate groups bound in OAB units remains operative. Since doped quinoid units do not contribute to the quinoid band (Q-band at 630 nm), the intensity ratio of the Q-band and benzenoid band (B-band at 320 nm) cannot be simply correlated with the oxidation state of poly(OMA-co-OAB) copolymers in contrast to poly(OMA) and polyaniline. Spectra of copolymers with less than 60 % of OMA units as well as those of poly(OAB) in DMSO and NMP/TEA are almost identical due to internal doping, which is proposed to lead to structures in which main-chain protons are coulombically bound with immobile carboxylate anions. In the spectra of copolymers with less than 60 % of OMA units, a well-resolved band occurs at 500 nm, which can be ascribed to alternating or close-to-alternating sequences of OMA and OAB units.     

Free Radical Production upon Photoinduced Electron Transfer Reactions in the Presence of Vinyl Monomers. Effect of Water Addition*

Free radical fragments produced in the photoinduced electron transfer from triethylamine (TEA) to excited pyrenebutyltrimethylammonium (*PyBu⁺) lead to 1-vi-nyl-2-pyrrolidinone (VP) and 2-hydroxyethyl methacry-late (HEMA) polymerization. Experiments carried out in water/acetonitrile solvent mixtures showed that the polymerization rate of VP increases upon increasing the water content, whereas the polymerization rate of HEMA follows the opposite trend. These results are interpreted in terms of the strong dependence on the solvent properties of the photochemical behavior of PyBu⁺ in the presence of the amine or monomers. Thus, the *PyBu⁺ quenching by VP is almost negligible in both solvents (water and acetonitrile). Whereas, the *PyBu⁺ quenching rate constant by HEMA in water is 4 times 10⁹M^?l s^?1 and decreases four orders of magnitude in acetonitrile. The quenching of *PyBu⁺ by TEA in aqueous solutions is controlled by hydrogen-bonding interactions between water molecules and the amine. Quantum yields of the pyrene radical anion (φ_Py) also strongly depend on the water content, decreasing from 0.28 to 0.015 upon going from acetonitrile to water.     

Inclusion complexes phenanthrene-β-cyclodextrin and their interactions with aliphatic amines

In the present work the formation constant of phenanthrene- β-cyclodextrin (Ph-β-CD) complexes in water and in H₂O-DMSO(Dimethyl sulfoxide)20 % were calculated. Interactions between the complexes and two aliphatic amines: diethylamine (DEA) and triethylamine (TEA) were also studied. The characteristies of the amine, in relation to the solvent used, were seen to be very important.     

Calix[4]pyrrole as a chloride anion receptor: solvent and countercation effects

The interaction of calixpyrrole with several chloride salts has been studied in the solid state by X-ray crystallography as well as in solution by isothermal titration calorimetry (ITC) and (1)H NMR spectroscopic titrations. The titration results in dimethylsulfoxide, acetonitrile, nitromethane, 1,2-dichloroethane, and dichloromethane, carried out using various chloride salts, specifically tetraethylammonium (TEA), tetrapropylammonium (TPA), tetrabutylammonium (TBA), tetraethylphosphonium (TEP), tetrabutylphosphonium (TBP), and tetraphenylphosphonium (TPhP), showed no dependence on method of measurement. The resulting affinity constants (K(a)), on the other hand, were found to be highly dependent on the choice of solvent with K(a)'s ranging from 10(2)-10(5) M(-1) being recorded in the test solvents used for this study. In dichloromethane, a strong dependence on the countercation was also seen, with the K(a)'s for the interaction with chloride ranging from 10(2)-10(4) M(-1). In the case of TPA, TBA, and TBP, the ITC data could not be fit to a 1:1 binding profile.     

Mechanistic studies of carbonate macrocyclization

The kinetics of phenylchloroformate (PCF) reactions have been used to model some of the key chemical events in carbonate macrocyclization. Three reactions have been studied using stopped-flow FT-IR spectroscopy: formation of acyl ammonium salt from PCF and three different trialkylamines, the conversion of acyl ammonium salt to urethane, and the condensation reaction between acyl ammonium salt and 4-isopropylphenol. The rate dependence was studied for triethylamine (TEA), diethylmethylamine (DEMA) and tri-n-butylamine (TBA) at 0°C in anhydrous CH₂Cl₂. The reactivity order for acyl ammonium salt formation for TBA: TEA: DEMA is 1 : 2.7 : >444. By contrast, condensation and urethane formation are not sensitive to the structure of the amine. The rate of condensation is comparable to the rate of acyl ammonium salt formation for TEA and TBA, while the rate of urethane formation is the slowest process for all three amines. These results are consistent with the view that the yield of macrocyclic polycarbonates is related to the concentration of the acyl ammonium salt. The optimum amine concentration for obtaining high yields of cyclics varies with the amine structure and parallels the difference in the rates of acyl ammonium salt formation. © 1994 John & Sons, Inc.     

Photoreduction of Azaoxoisoaporphines by Amines: Laser Flash and Steady‐State Photolysis and Pulse Radiolysis Studies

Photoreduction of 7H‐benzo[e]perimidin‐7‐one (3‐AOIA, A1) and its 2‐methyl derivative (2‐Me‐3‐AOIA, A2) by non‐H‐donating amines (1,4‐diazabicyclo[2.2.2]octane [DABCO]; 2,2,6,6‐tetramethylpiperidine [TMP]), and a hydrogen‐donating amine (triethylamine [TEA]), has been studied in deaerated neat acetonitrile solutions using laser flash photolysis (LFP) and steady‐state photolysis. The triplet excited states of A1 and A2 were characterized by a strong absorption band with λ_max = 440 nm and lifetimes of 20 and 27 μs respectively. In the presence of tertiary amines, both triplet excited states were quenched with rate constants close to the diffusional limit (k_q ranged between 10⁹ and 10¹⁰ M^?1 s^?1). The transient absorption spectra observed after quenching with DABCO and TMP were characterized by maxima located at 460 nm and broad shoulders in the range of 500–600 nm. These transient species are attributed to solvent‐separated radical ion pairs and/or to isolated radical anions. In the presence of TEA, these transients undergo proton transfer, leading to the neutral hydrogenated radicals, protonated over the N1‐ and O‐atoms. Transient absorption spectra of these transients were characterized by maxima located at 400 and 520 nm and 430 nm respectively. Additional support for these spectral assignments was provided by pulse radiolysis (PR) experiments in acetonitrile and 2‐propanol solutions.     

A new luminescent terbium 4-methylsalicylate complex as a novel sensor for detecting the purity of methanol

A new dinuclear terbium complex [Tb(2)(4-msal)(6)(H(2)O)(4)]·6H(2)O (1) (4-msal = 4-methylsalcylate) was synthesized. Its structure was determined by single crystal X-ray diffraction, and the complex was characterized by PXRD, FT-IR, fluorescence, TGA and DTA. Complex 1 exists as discrete molecules that are linked by extensive O-H … O hydrogen bonds into a 3D network. The luminescence lifetimes of 3 μM methanol solution and solid sample of 1 are 1.321 and 1.009 ms, respectively. The quantum yield of solid sample is 6.0%. The luminescence quenched more than 50% when 3% (vol/vol) different impurities (acetone, acetonitrile, chloroform, dichloromethane, dioxane, DMF, DMSO, ethanol, ether, ethyl acetate, glycol, H(2)O, hexane, TEA, THF and toluene or their mixture) were added. The inverse linear relationship between the Lg value of fluorescence intensity and the volume ratio of the minor component (to a maximum of 20%) is interpreted in terms of LgI = a-bX (I: luminescence intensity; X: volume ratio of impurities in methanol; a, b are constants). So 1 is a potential luminescent sensor for analyzing the purity of methanol.     

非水反相微乳的加溶与电导性质研究

研究了若干非水极性溶剂（甲酰胺、二甲基亚砜和乙腈）及其与水的混合物/AOT/正庚烷反相微乳体系的加溶性质及其电导行为.结果表明，在AOT反相微乳中，非水极性溶剂的最大加溶量均远小于水的加溶量.其最大加溶量顺序为二甲基亚砜< 甲酰胺< 乙腈< 水.甲酰胺和乙腈与水的加溶相互抵制，而水在一定范围内可促进二甲基亚砜的加溶.非水反相微乳的电导率随加溶量的变化规律与含水反相微乳体系类同，但到达电导率极大值和出现渗滤时的加溶量明显比含水反相微乳 体系的要小.     

Reaction of halogenated hydrocarbon solvents with tertiary amines: Spectrophotometric and conductimetric study

Halogenated hydrocarbon solvents, SolvCl, (dichloromethane, chloroform, and 1,2‐dichloroethane) react with various types of tertiary amines, A, such as tri‐n‐buthylamine, tropane derivatives (tropine and atropine) and quinine generating a quaternary ammonium salt, N‐halogenalkylammonium chloride (SolvA⁺Cl^?). Some tertiary amines, as well as secondary and primary amines, cannot react with these solvents. This reaction has been detected and studied by both conductivity and visible spectrophotometry measures—the latter after adding a small quantity of a dye, such as bromocresol green (BCGH₂), bromophenol blue (BPBH₂), or tetrabromophenolphthaleinethyl ester (TBPEH). Both study methods permit the determination of the kinetic parameters, and they are in good agreement. The monoprotic TBPEH is the dye of the simplest mechanism, useful to study kinetics of amines of uncertain behavior as quinine, while BPBH₂ is the best dye for quantitative determinations. Kinetics for this reaction are of first order for both amine, A, and solvent, SolvCl; activation energy, E_a, and frequency factor are also determined. Rate constants increase with the amine basicity and with a reduction in the number of the halogen atoms present in the solvent. This reaction is slow but not negligible and must be considered a side reaction of these universally used solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36:500–509, 2004     

Complex formation between aliphatic amines and chromogenic calix[4]arene derivatives studied by FT-IR spectroscopy

Complex formation of two calix[4]arene derivatives - containing two ethoxycarbonylmethoxy groups or a bridge including two carboxamide moieties in the coordination sphere - with aliphatic amines (n-octylamine, OA and triethylamine, TEA) were the subject of FT-IR studies. Two nitrophenyl type auxochromic moieties were also present in both of the ligands. Solvent effects were studied in chloroform, diiodomethane and dichloromethane. Presumably, in these reactions, the reactants undergo phenol-amine type interactions and, simultaneously, coordinative interaction takes place between the carbonyl group of the ligand and the protonated form of the aliphatic amine. Complex formation of calixarene 1a with n-octylamine was complete resulting in drastic changes in the FT-IR spectra. Moreover, the possibility of the formation of a new compound by the reaction between the ester type functionalities and octylamine was precluded. The expected ligand was synthesized and its spectra were compared with those of calixarene 1a. In most of the cases of calixarene 1b, the amide moiety of the carboxamide bridge does not participate in the complex formation with the exception of complexes formed in diiodomethane solution and of the 1b-TEA complex observed in dichloromethane.     

Spectrophotometric and conductometric study of complexation of salophen and some transition metal ions in nonaqueous polar solvents

The complexation reaction between Cu(2+), Co(2+) and Ni(2+) metal cations with N,N'-bis(salicylidene)-1,2-phenylenediamine (salophen), in three nonaqueous polar solvents such as: acetonitrile (AN), dimethyl sulfoxide (DMSO), methanol (MeOH) and two binary mixtures of AN:DMSO and AN:MeOH at 25 degrees C were studied by spectrophotometric and conductometric methods. All investigated metal ions form 1:1 ML complex which their stability constants were determined and increase as Irving-Williams stability order of Co(2+)相似文献   

Room temperature ionic liquid as matrix medium for the determination of residual solvents in pharmaceuticals by static headspace gas chromatography

Using new solvent room temperature ionic liquid (IL) matrix media, testing of residual solvents in pharmaceutical preparations with static headspace gas chromatographic (SH-GC), is described. The purpose of this work was to demonstrate the feasibility of IL as diluent, six solvents utilized in synthesis of Adefovir Dipivoxil: acetonitrile, dichloromethane, N-methyl-2-pyrrolidone (NMP), toluene, dimethylformamide (DMF), n-butyl ether were dissolved in IL: 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF(4)). The method of external standard was used for quantitative analysis. Its performance was evaluated and validated: all the RSD were lower than 10%, the limits of detection were all of the ppm level and the method was both accurate and linear. And better sensitivities for the six solvents were gained with [bmim]BF(4) as diluent comparing with DMSO.     

A Three-Phase Solvent System in High-Speed Counter-Current Chromatographic for the Separation and Purification of Bioactive Constituents from Acanthus ilicifolius

A new three-phase solvent system, n-hexane–acetonitrile–dichloromethane–water–ethyl acetate (5:5:1:5:1.5, v/v/v/v/v) was developed for the high-speed counter-current chromatographic (HSCCC) separation and purification of five bioactive constituents, syringic acid (1), vomifoliol (2), vanillic acid (3), 6-hydroxy-2-benzoxazolinone (4), and 2-benzoxazolinone (5), from Acanthus ilicifolius.

     

Effects of solvents on the electron configurations of the low-spin dicyano[meso-tetrakis(2,4,6-triethylphenyl)porphyrinato]iron(III) complex: importance of the C-H...N weak hydrogen bonding

There are two types of electron configurations, (d(xy))(2)(d(xz), d(yz))(3) and (d(xz), d(yz))(4)(d(xy))(1), in low-spin iron(III) porphyrin complexes. To reveal the solvent effects on the ground-state electron configurations, we have examined the (13)C- and (1)H-NMR spectra of low-spin dicyano[meso-tetrakis(2,4,6-triethylphenyl)porphyrinato]ferrate(III) in a variety of solvents, including protic, dipolar aprotic, and nonpolar solvents. On the basis of the NMR study, we have reached the following conclusions: (i) the complex adopts the ground state with the (d(xz), d(yz))(4)(d(xy))(1) electron configuration, the (d(xz), d(yz))(4)(d(xy)())(1) ground state, in methanol, because the d(pi) orbitals are stabilized due to the O-H...N hydrogen bonding between the coordinated cyanide and methanol; (ii) the complex also exhibits the (d(xz), d(yz))(4)(d(xy))(1) ground state in nonpolar solvents, such as chloroform and dichloromethane, which is ascribed to the stabilization of the d(pi) orbitals due to the C-H...N weak hydrogen bonding between the coordinated cyanide and the solvent molecules; (iii) the complex favors the (d(xz), d(yz))(4)(d(xy))(1) ground state in dipolar aprotic solvents, such as DMF, DMSO, and acetone, though the (d(xz), d(yz))(4)(d(xy))(1) character is less than that in chloroform and dichloromethane; (iv) the complex adopts the (d(xy))(2)(d(xz), d(yz))(3) ground state in nonpolar solvents, such as toluene, benzene, and tetrachloromethane, because of the lack of hydrogen bonding in these solvents; (v) acetonitrile behaves like nonpolar solvents, such as toluene, benzene, and tetrachloromethane, though it is classified as a dipolar aprotic solvent. Although the NMR results have been interpreted in terms of the solvent effects on the ordering of the d(xy) and d(pi) orbitals, they could also be interpreted in terms of the solvent effects on the population ratios of two isomers with different electron configurations. In fact, we have observed the unprecedented EPR spectra at 4.2 K which contain both the axial- and large g(max)-type signals in some solvents such as benzene, toluene, and acetonitrile. The observation of the two types of signals has been ascribed to the slow interconversion on the EPR time scale at 4.2 K between the ruffled complex with the (d(xz), d(yz))(4)(d(xy))(1) ground state and, possibly, the planar (or nearly planar) complex with the (d(xy))(2)(d(xz), d(yz))(3) ground state.     

Mechanism of charge-transfer polymerization. V. Photopolymerization and photocyclodimerization of N-vinylcarbazole in the N-vinylcarbazole–oxygen–solvent system

Photochemical reactions of N-vinylcarbazole (VCZ), studied in various solvents, were profoundly influenced by the atmosphere. In the deaerated system radical polymerization of VCZ occurred in various solvents, e.g., tetrahydrofuran, acetone, ethyl methyl ketone, acetonitrile, methanol, sulfolane, N,N-dimethylformamide (DMF), or dimethyl sulfoxide (DMSO). By contrast, when dissolved oxygen was present, cyclodimerization of VCZ occurred exclusively to give trans-1,2-dicarbazole-9-yl-cyclobutane in such polar, basic solvents as acetone, ethyl methyl ketone, acetonitrile or methanol. In stronger basic solvents, i.e., sulfolane, DMF, or DMSO, simultaneous radical polymerization and cyclodimerization of VCZ proceeded, the ratio of the cyclodimerization to the radical polymerization decreasing in the order, sulfolane > DMF > DMSO. In dichloromethane, on the other hand, cationic polymerization of VCZ occurred irrespective of the atmosphere. It is suggested that oxygen acts as an electron acceptor to the excited VCZ, electron transfer occurring in polar solvents from the excited VCZ to oxygen to give transient VCZ cation radical. The effect of solvent basicity on the photocyclodimerization of VCZ is discussed.     

Spectroscopic studies of intermolecular hydrogen bonding and proton transfer complexes of chromotropic acid with some amines in methanol

The proton transfer reactions between chromotropic acid (CTA) and some amines including benzylamine (BA), triethylamine (TEA), pyrrolidine (PY) and 1,8-bis(dimethylamino) naphthalene (DMAN) have been investigated spectrophotometrically in methanol. A long wavelength band at 365 nm has been recorded due to the proton transfer (PT) complex formation. The proton transfer equilibrium constants K_PT were estimated utilizing the minimum–maximum absorbances method. It has been found that K_PT were not depend on the amine pKa values, but strongly depend on the formed structures of the PT complexes. Job^’s method of continuous variations and photometric titrations were applied to identify the compositions of the formed PT complexes where 1:1 complexes (proton donor: proton acceptor) were produced. Due to the rapidity and simplicity of the proton transfer reactions and the stability of the formed complexes, a rapid and accurate spectrophotometric method for the determination of CTA was proposed for the first time.