Microwave-assisted hydrothermal synthesis and electrochemical studies of α- and h-MoO<Subscript>3</Subscript>

Two modifications of molybdenum trioxide with orthorhombic (α-MoO₃) and hexagonal (h-MoO₃) crystal structure have been synthesized by a microwave-assisted hydrothermal method, facilitated by formic acid. Characterization by means of X-ray diffraction, scanning electron microscopy, specific surface analysis, and Fourier-transform infrared, Raman, and UV-Vis spectroscopy reveals phase-pure crystalline powder samples of hexagonal h-MoO₃ microrods and of α-MoO₃ nanobelt bundles, respectively. The electrochemical properties of the MoO₃ compounds, studied by cyclic voltammetry and galvanostatic cycling vs. Li/Li⁺, strongly depend on the structure and the applied potential range. In the range of 1.5–3.5 V, Li⁺-ions can be reversibly intercalated into the α-MoO₃ nanobelts. Utilizing the material in this way as intercalation cathode material yields an initial discharge capacity of 295 mA h g^?1 at 100 mA g^?1 and comparably moderate capacity fading of 25% between cycles 20 and 100. Extending the potential range to 0.01–3.0 V induces the conversion reaction to Mo, which for both modifications yields high initial capacities of around 1500 mA h g^?1 but is associated with much stronger capacity fading.     

Preparation and bioevaluation of <Superscript>99m</Superscript>Tc–carbonyl complex of guanine

The aim of this study is to prepare radiolabeled guanine with ^99mTc(CO)₃⁺ core. For this purpose, guanine has been radiolabeled with ^99mTc(CO)₃⁺ core. Quality control study of radiolabeled guanine molecule with ^99mTc(CO)₃⁺ core was performed by thin layer radio chromatography (TLRC) and high performance liquid radio chromatography (HPLRC). The results showed that the radiolabeling yield was quite high (94 ± 3%). Beside that ^99mTc(CO)₃–Gua complex has showed good in vitro stability during the 24 h period. Radiopharmaceutical potential of this complex was evaluated in Wistar Albino Rats. It was concluded that ^99mTc(CO)₃–Gua could be used as a nucleotide radiopharmaceutical for in vivo applications.     

Synthesis and examination of antimicrobial properties of aminomethylated derivatives C<Subscript>6</Subscript>–C<Subscript>7</Subscript> of alicyclic diols

Synthesis of C₆–C₇ alicyclic diols was studied by a catalytic oxidation of cyclohexene, norbornene and their methyl derivatives in the presence of heterogenized molybdenum-containing catalysts. By a triple condensation of the diols with formaldehyde and secondary amines a synthesis of their aminomethylated derivatives with various substituents at nitrogen atom was examined. Antimicrobial properties of the synthesized amino alcohols in M-10 oil as additives with fungicidal and bactericidal activities were studied.     

Thermodynamics and kinetics of hydrogen absorption–desorption of highly crystalline LaNi<Subscript>5</Subscript>

Lanthanum penta-nickel (LaNi₅) has been considered as potential candidates for hydrogen storage application at room temperature (20 °C). The intermetallic could store more than 1.36 mass % hydrogen. Substantially, work has been done on the hydrogenation–dehydrogenation kinetics and thermodynamics of LaNi₅. It has been reported that the hydrogen storage capacity reduced after single activation due to the deep trap of hydrogen. The kinetics and thermodynamics of trap hydrogen need to be quantified to understand the nature of trap and the required temperature to release the trapped hydrogen. In the current study, thermodynamics and kinetics of hydrogenation–dehydrogenation of high phase purity crystalline LaNi₅ were investigated. Sievert’s apparatus was used to investigate the pressure composition-temperature measurement to find out the cyclic hydrogen storage capacity and the thermodynamic parameters. The thermodynamic data obtained were evaluated using high-pressure differential scanning calorimetric technique. The trap hydrogen and their desorption kinetics were studied using thermogravimetric–thermal analysis–mass spectrometric techniques.     

Theoretical study of the activation barriers of elementary reactions of hydrogenation of aluminide clusters X@Al<Subscript>12</Subscript> and X@Al<Stack><Subscript>12</Subscript><Superscript>−</Superscript></Stack> with dopants X = Al,Si, and Ge

The transition states and activation barriers h of elementary reactions of addition of the H₂ molecule to aluminide clusters Al₁₃, Al ₁₃ ^? , Al₁₃H ₂ ^? , Al₁₃H ₄ ^? , Si@Al₁₂, Ge@Al₁₂, and LiAl₁₃ were calculated within the B3LYP approximation of the density functional theory using 6–31G* and 6–311+G* basis sets. The barriers h for all diamagnetic clusters were found to be high (～30–40 kcal/mol). The outer-sphere cation Li⁺ decreases while the endohedral electronegative dopants Si and Ge increase the barrier by a few kcal/mol. The hydrogenation barrier of the neural paramagnetic cluster Al₁₃, which has free valence, decreases to ～20 kcal/mol. The addition of a hydrogen atom or a Cl₂ molecule to both paramagnetic and diamagnetic aluminum clusters occurs without a barrier. The first stage of the reaction (addition of H₂ to an Al-Al edge) is in all cases the critical stage of aluminide hydrogenation. The barrier h of this reaction is several times higher than the barriers to migration of hydrogen atoms over the metal cage. The migration of H atoms occurs simultaneously with considerable distortions of the Al₁₃ cage even to the extent that it changes its structural motif. The addition of the H₂ molecule to the Al@TiAl₁₁ cluster containing the peripheral titanium atom occurs with a small barrier, whereas the barrier to elimination of H₂ from the dihydride Al@TiAl₁₁H₂ is reduced to ～15 kcal/mol. Based on the calculations, the conclusion was drawn that the elementary reactions of hydrogenation and dehydrogenation for Ti-doped aluminide clusters should occur considerably faster and under milder conditions than for homonuclear aluminides.     

The effects of thermal treatment of ZnO–ZnCr<Subscript>2</Subscript>O<Subscript>4</Subscript> catalyst on the particle size and product selectivity in dehydrocyclization of crude glycerol and ethylenediamine

The ZnO–ZnCr₂O₄ (Zn–Cr–O) sample obtained by decomposition of Zn-Cr hydrotalcite precursor was subjected to the thermal treatment at different temperatures and the physico-chemical properties of the Zn–Cr–O system were compared with its catalytic behavior in dehydrocyclization of crude glycerol and ethylenediamine (EDA). Upon high temperature treatment of Zn–Cr–O the Cr⁶⁺ ions underwent autoreduction to form stable Cr³⁺ species and the particle size of both ZnO and ZnCr₂O₄ increased dramatically. Thermal effect did not influence the intermolecular cyclisation of EDA to form pyrazine. By contrast, an inversely proportional dependence was found between the rate of formation of 2-methylpyrazine and the particle size of Zn–Cr–O whereas the rate of 2-pyrazinylmethanol was directly proportional to the particle size.     

Synthesis and characterization of CeO<Subscript>2</Subscript>–graphene composite

The synthesis and characterization of graphite oxide (GO), graphene (GS), and the composites: GS–CeO₂ and GO–CeO₂ are reported. This synthesis was carried out by mixing aqueous solutions of CeCl₃·7H₂O and GO, which yields the oxidized composite GO–CeO₂. GO–CeO₂ was hydrothermally reduced with ethylene glycol, at 120 °C, yielding the reduced composite GS–CeO₂. GO, GS ,and the composites with CeO₂ were characterized by CHN, TG/DTG, BET, XRD, SEM microscopy, FTIR, and Raman spectroscopy. The estimation of crystallite size of CeO₂ anchored on GO and on GS by Raman, XRD, and SEM agreed very well showing diameters about 5 nm. The role of particles of CeO₂ coating carbon sheets of GO and GS was discussed.     

Solubility of B-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> and the Hydrolysis of Niobium(V) in Aqueous Solution as a Function of Temperature and Ionic Strength

B-Nb₂O₅ was recrystallized from commercially available oxide, and XRD analyses indicated that it is stable in contact with solutions over the pH range 0 to 9, whereas solid polyniobates such as Na₈Nb₆O₁₉?13H₂O(s) appear to predominate at pH>9. Solubilities of the crystalline B-Nb₂O₅ were determined in five NaClO₄ solutions (0.1≤I _m /mol?kg^?1≤1.0) over a wide pH range at (25.0±0.1)?°C and at 0.1 MPa. A limited number of measurements were also made at I _m =6.0 mol?kg^?1, whereas at I _m =1.0 mol?kg^?1 the full range of pH was also covered at (10, 50 and 70)?°C. The pH of these solutions was fixed using either HClO₄ (pH≤4) or NaOH (pH≥10) and determined by mass balance, whereas the pH on the molality scale was measured in buffer mixtures of acetic acid?+?acetate (4≤pH≤6), Bis-Tris (pH≈7), Tris (pH≈8) and boric acid?+?borate (pH≈9). Treatment of the solubility results indicated the presence of four species, \(\mathrm{Nb(OH)}_{n}^{5-n}\) (where n=4–7), so that the molal solubility quotients were determined according to:

$0\mathrm{.5Nb}_{2}\mathrm{O}_{5}\mathrm{(cr)+0}\mathrm{.5(2}n-5\mathrm{)H}_{2}\mathrm{O(l)}_{\leftarrow}^{\to}\mathrm{Nb(OH)}_{n}^{5-n}+(n-5)\mathrm{H}^{+}\quad (n=4\mbox{--}7)$

and were fitted empirically as a function of ionic strength and temperature, including the appropriate Debye-Hückel term. A Specific Interaction Theory (SIT) approach was also attempted. The former approach yielded the following values of log?₁₀ K _sn (infinite dilution) at 25?°C: ?(7.4±0.2) for n=4; ?(9.1±0.1) for n=5; ?(14.1±0.3) for n=6; and ?(23.9±0.6) for n=7. Given the experimental uncertainties (2σ), it is interesting to note that the effect of ionic strength only exceeded the combined uncertainties significantly in the case of log?₁₀ K _s6 to I _m =1.0 mol?kg^?1, such that these values may be of use by defining their magnitudes in other media. Values of Δ _f G ^o, Δ _f H ^o, S ^o and \(C_{p}^{\mathrm{o}}\) (298.15 K, 0.1 MPa) for each hydrolysis product were calculated and tabulated.

     

Comparison of sorption of Pb<Superscript>2+</Superscript> and Cd<Superscript>2+</Superscript> on Kaolinite clay and polyvinyl alcohol-modified Kaolinite clay

Kaolinite clay obtained from Ubulu-Ukwu, Delta state in Nigeria was modified with polyvinyl alcohol (PVA) reagent to obtain PVA-modified Kaolinite clay adsorbent. Scanning Electron Microscopy (SEM) of the PVA-modified adsorbent suggests that Kaolinite clay particles were made more compact in nature with no definite structure. Modification of Kaolinite clay with PVA increased its adsorption capacity for 300 mg/L Pb²⁺ and Cd²⁺ by a factor of at least 6, i.e., from 4.5 mg/g to 36.23 mg/g and from 4.38 mg/g to 29.85 mg/g, respectively, at 298 K. Binary mixtures of Pb²⁺ and Cd²⁺ decreased the adsorption capacity of Unmodified Kaolinite clay for Pb²⁺ by 26.3% and for Cd²⁺ by 0.07%, respectively. In contrast, for PVA-modified Kaolinite clay, the reductions were up to 50.9% and 58.5% for Pb²⁺ and Cd²⁺, respectively. The adsorption data of Pb²⁺ and Cd²⁺ onto both Unmodified and PVA-modified Kaolinite clay adsorbents were found to fit the Pseudo-Second Order Kinetic model (PSOM), indicating that adsorption on both surfaces was mainly by chemisorption and is concentration dependent. However, kinetic adsorption data from both adsorbent generally failed the Pseudo-First order Kinetic model (PFOM) test. Extents of desorption of 91% Pb²⁺ and 94% Cd²⁺ were obtained, using 0.1 M HCl, for the Unmodified Kaolinite clay adsorbent. It was found that 99% Pb²⁺ and 97% Cd²⁺, were desorbed, for PVA-modified Kaolinite clay adsorbents within 3 min for 60 mg/L of the metal ions adsorbed by the adsorbents.     

Bond energies and the enthalpies of formation of mono- and polyradicals in nitroakanes 3. Nitroalkanes C<Subscript>4</Subscript>–C<Subscript>7</Subscript>

Based on the experimentally determined values and published data, the enthalpies of formation of nitroalkanes C₄–C₇ in the standard state and in the gas phase were recommended. The dissociation energies of bonds in these compounds were determined taking into account the enthalpies of atomization and the energies of nonvalent interactions of nitro groups with one another. The calculated values were compared with the available thermal decomposition kinetic data. The dissociation energies of bonds in C₄–C₇ nitroalkane radicals were also calculated using the enthalpies of atomization and the energies of nonvalent interactions of nitro groups. Regularities of changes in the bond dissociation energies of nitroalkanes C₁–C₇ and their radicals are established.     

Crystal Structures of α- and β-SrCeCuS<Subscript>3</Subscript>

The crystal structure of SrCeCuS₃, a complex sulfide synthesized for the first time, has been solved using X-ray powder diffraction data. The crystals are orthorhombic, space group Pnma. SrCeCuS₃ has two polymorphs: the high-temperature phase of Ba₂MnS₃ structural type (a = 8.1393(3) Å, b = 4.0587(2) Å, c = 15.9661(2) Å) and the low-temperature phase isostructural to BaLaCuS₃ (a = 11.1626(2) Å, b = 4.0970(2) Å, c = 11.5307(1) Å). The incongruent melting temperature and enthalpy of SrCeCuS₃ are, respectively, 1486 ± 3 K and 13.4 ± 1.5 J/g.     

Nucleophilic Reactivity of Hydroxide and Hydroperoxide Ions in Aqueous-Alcoholic Media and of HCO<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Ion in Water

Nucleophilic reactivity of hydroxide and hydroperoxide ions toward ethyl 4-nitrophenyl ethylphosphonate, diethyl 4-nitrophenyl phosphate, 4-nitrophenyl 4-toluenesulfonate, and 4-nitrophenyl dimethylcarbamate in the system H₂O₂-KOH was studied in aqueous-alcoholic solutions at 25°C. The rate of reactions of both anions with ethyl 4-nitrophenyl ethylphosphonate, diethyl 4-nitrophenyl phosphate, and 4-nitrophenyl dimethylcarbamate and of hydroxide ion with 4-nitrophenyl 4-toluenesulfonate increases with rise in the fraction of the alcohol in mixtures of water with isopropyl and tert-butyl alcohols, while the reaction rate of hydroperoxide ion with 4-nitrophenyl 4-toluenesulfonate decreases. The rate of reactions of both anions with all the above substrates in mixtures of water with ethylene glycol decreases as the fraction of the latter rises. The apparent rate of the reaction of ethyl 4-nitrophenyl ethylphosphonate with anionic nucleophiles in the system H₂O₂-HO^?-HCO ₃ ^? in water at pH 8.5 almost does not depend on the concentration of ammonium hydrogen carbonate up to a value of 1 M, and it increases when the NH₄HCO₃ concentration exceeds 1 M. Mixtures of water with the lower monohydric alcohols were recommended for use as components of H₂O₂-HO^?-HCO ₃ ^? systems for oxidative decomposition of ecotoxicants.     

Synthesis and characterization of Pd nanoparticle-modified magnetic Sm<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZrO<Subscript>2</Subscript> as effective multifunctional catalyst for reduction of 2-nitrophenol and degradation of organic dyes

In this study, Pd nanoparticle-modified magnetic Sm₂O₃–ZrO₂ material (Pd–Fe₃O₄–Sm₂O₃–ZrO₂) as multifunctional catalyst was fabricated and used for catalytic reduction of 2-nitrophenol compound, degradation of methylene blue and rhodamine B dyes, which are toxic pollutants. The magnetic material was used for the first time as a catalyst for the reduction and degradation studies. Pd nanoparticle-modified magnetic Sm₂O₃–ZrO₂ catalyst was prepared using the deposition–precipitation methods and were characterized by X-ray diffraction, scanning electron microscopy, atomic absorption spectrometry, Raman spectroscopy and BET surface analyzer. The Pd nanoparticle-modified magnetic Sm₂O₃–ZrO₂ material can lead to high catalytic activity for the reduction of 2-nitrophenol and degradation of rhodamine B and methylene blue with >?95% conversion within ~?2 and 80 s even when the content of Pd in it is as low as 5.8 wt%.     

Liquid-phase synthesis and physicochemical properties of xerogels,nanopowders and thin films of the CeO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Low-agglomerated xerogels, ultrafine oxide powders with particle sizes of 12–20 nm, and uniform thin films with particle sizes of 8–14 nm are prepared in the CeO₂–Y₂O₃ system using liquid-phase low-temperature methods, namely via coprecipitation of hydroxides and cocrystallization of salts, sol—gel technology. A comparative characterization of the prepared xerogels and nanopowders is performed using a set of physicochemical analytical methods. A dependence of phase composition, microstructure, and particle size on synthetic parameters is elucidated.     

Conductivity of Lanthanum-Strontium Cuprate LaSrCuO<Subscript>4−δ</Subscript> and Ionic Reversibility of Relevant Electrodes

A single-phase sample of the LaSrCuO_3.58 composition is prepared by solid-state synthesis at 1473 K in air. The conductivity of LaSrCuO_3.58 is measured by a four-probe method at direct current in the temperature range from 298 to 1173 K at oxygen partial pressures from 28 to 2.1 × 10⁴ Pa. Heating samples above ∼670 K is shown to result in a changeover of the conduction type from semiconducting (p-type) to metallic. Exchange currents at the LSCuO/YSZ interface are measured by impedance spectroscopy. The measurements are carried out in high-density symmetrical cells LSCuO|YSZ|LSCuO, fabricated by hot pressing of powders under a pressure of 3.5 × 10⁹ Pa at 773 K. Experimental exchange currents i ₀ (varying from 10⁻³ to 10⁻⁴ A/cm² in the temperature interval from 800 to 1173 K) are comparable with such of materials based of lanthanum-strontium manganite.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 516–522.Original Russian Text Copyright © 2005 by Mazo, Savvin, Mychka, Dobrovol’skii, Leonova.     

Review of the thermodynamic and transport properties of EuBr<Subscript>2</Subscript>–RbBr binary system

Differential Scanning Calorimetry was used to study phase equilibrium in EuBr₂–RbBr binary system. It was established that this system includes two eutectics and three stoichiometric compounds. First of them, Rb₂EuBr₄, decomposes peritectically at 778 K. Second one, RbEuBr₃, undergoes the solid–solid phase transition at 732 K and melts incongruently at 852 K. Third compound, RbEu₂Br₅, melts congruently at 888 K. The composition and temperature values of eutectics were determined as x(EuBr₂) = 0.316; T _eut = 776 K and x(EuBr₂) = 0.797; T _eut = 859 K. Mixing enthalpy was measured by direct calorimetry on the whole composition range. The minimum of the mixing enthalpy occurs around the composition x(EuBr₂) ≈ 0.4. The electrical conductivity of liquid mixtures was also investigated over the whole composition range and measured down to temperatures below solidification. The specific conductance (liquid phase) plotted against the mole fraction of EuBr₂ shows a broad minimum at x(EuBr₂) ~ 0.6. The activation energy for conductivity changes with temperature. Results obtained are discussed in terms of possible complex formation.     

The state of dispersed niobia species on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and their catalytic performance for condensation of isobutylene and isobutyraldehyde

Catalysts of Nb₂O₅/γ-Al₂O₃ were prepared by aqueous solution impregnation. The state of niobia species on surface of γ-Al₂O₃ is characterized by using the technology of X-ray power diffraction (XRD) and analyzed using the “incorporation model”. The acidity and the nature of acid sites of the catalysts were evaluated by means of Fourier transform infrared (FTIR) spectroscopy of adsorbed pyridine. The catalytic activity of Nb₂O₅/γ-Al₂O₃ catalysts was evaluated by a condensation reaction from isobutene and isobutyraldehyde to 2,5-dimethyl-2,4-hexadiene. The results of XRD indicate that the dispersion capacity of niobia on γ-Al₂O₃ is about 0.76 mmol Nb per 100m² γ-Al₂O₃, which is almost identical to the theoretical value (0.75 mmol Nb per 100m² γ-Al₂O₃) calculated by the “incorporation model”. The results of Py-IR and catalytic activity evaluation indicate that the acidity feature is related to the state of dispersed niobia species as well as the loading of niobia onto the surface of γ-Al₂O₃ support.     

Comparison of the Active Species in the RF and Microwave Flowing Discharges of N<Subscript>2</Subscript> and Ar–20 %N<Subscript>2</Subscript>

We report a detailed comparison between RF and microwave (HF) plasmas of N₂ and Ar–20 %N₂ as well as in the corresponding afterglows by comparing densities of active species at nearly the same discharge conditions of tube diameter (5–6 mm), gas pressure (6–8 Torr), flow rate (0.6–1.0 slm) and applied power (50–150 W). The analysis reveals an interesting difference between the two cases; the length of the RF plasma (~25 cm) is measured to be much longer than that of HF (6 cm). This ensures a much longer residence time (10^?2 s) of the active species in the N₂ RF plasma [compared to that (10^?3 s) of HF], providing a condition for an efficient vibrational excitation of N₂(X, v) by (V–V) climbing-up processes, making the RF plasma more vibrationally excited than the HF one. As a result of high V–V plasma excitation in RF, the densities of the vibrationally excited N₂(X, v > 13) molecules are higher in the RF afterglow than in the HF afterglow. Destruction of N₂(X, v) due to the tube wall is estimated to be very similar between the two system as can be inferred from the γ_v destruction probability of N₂(X, v > 3–13) on the tube wall (2–3 × 10^?3 for both cases) obtained from a comparison between the density of N₂(X, v > 3–9) in the plasmas to that of the N₂(X, v > 13) in the long afterglows. Interestingly enough, densities of N-atoms and N₂(A) metastable molecules in the afterglow regions, however, are measured to be very similar with each other. The measured lower density of N₂ ⁺ ions than expected in the HF afterglow is rationalized from a high oxygen impurity in our HF setup since N₂ ⁺ ions are very sensitive to oxygen impurity .     

Study of kinetics and thermodynamics of the dehydration reaction of AlPO<Subscript>4</Subscript> · H<Subscript>2</Subscript>O

The kinetics and thermodynamics of the thermal dehydration of aluminum phosphate monohydrate, AlPO₄ · H₂O were studied using thermogravimetry (TG-DTG-DTA) at four heating rates in dry air atmosphere. The activation energies of the dehydration step of AlPO₄ · H₂O were calculated through the methods of Friedman (FR) and Flynn–Wall–Ozawa (FWO) and the possible conversion function has been estimated through the Achar and Li–Tang equations. The independent activation energies on extent of conversions and the better kinetic model of the dehydration reaction for AlPO₄ · H₂O indicate single kinetic mechanism and the F _2.05 model as a simple n-order reaction of “chemical process or mechanism no-invoking equation”, respectively. The positive values of ΔH^# and ΔG^# for the dehydration reaction show that it is endothermic and non-spontaneous process and it is connected with the introduction of heat. The kinetic and thermodynamic functions calculated for the dehydration reaction by different techniques and methods were found to be consistent.     

Influence of PEG additive and annealing temperature on structural and electrochromic properties of sol–gel derived WO<Subscript>3</Subscript> films

Sol–gel derived tungsten oxide (WO₃) films have been deposited by spin coating route using acetylated peroxotungstic acid (APTA) or a mixture of APTA and polyethylene glycol (PEG) dissolved in ethanol as the precursor solution, followed by thermal treatment in air. The influence of PEG additive and annealing temperature on the structural and electrochromic (EC) behavior of the films have been investigated. For films annealed at 300 °C, a porous nanocrystalline/amorphous microstructure was obtained in the WO₃-PEG film, while monoclinic microstructure was formed in the pure WO₃ film. Moreover, for the WO₃-PEG films, the film microstructure was found to depend on the annealing temperature. Electrochemical studies indicate that the WO₃-PEG film annealed at 300 °C (WP-300) exhibits superior EC properties, which produces faster switching speed (t _c = 19 s, t _b = 3 s),better reversibility (K = 0.97) as well as higher optical modulation (ΔT = 32% at 550 nm) and coloration efficiency (η = 22 cm²/C at 550 nm). Our results suggest that PEG addition in combination with an appropriate annealing treatment can benefit the EC properties, arising from the ease of ion diffusion within the EC material, as evident from the nanocrystallines embedded into the amorphous matrix with a porous character.