Optical characterization of pristine poly(3‐hexyl thiophene) films

We describe a comprehensive model for the optical properties of pristine films of poly‐(3‐hexylthiophene) (P3HT). The presented model is anisotropic with the optical axis normal to the substrate plane, which is consistent with previous x‐ray diffraction studies that show preferential edge‐on packing of the polymer chains on the substrate. Peak locations and spacings are defined using a Huang‐Rhys vibronic progression consistent with known phonon energies. We demonstrate that the model fits variable‐angle spectroscopic ellipsometry and normal‐incidence transmission data well, and accurately predicts angle‐ and polarization‐dependent transmission and reflection data. The spectral features of the optical constants used in the model are in excellent agreement with published spectroscopic data on P3HT. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Effect of chemical modifications on the electronic structure of poly(3‐hexylthiophene)

The widespread use of poly(3‐hexylthiophene) (P3HT) in the active layers of organic solar cells indicates that it possesses chemical stability and solubility suitable for such an application. However, it would be desirable to have a material that can maintain these properties but with a smaller bandgap, which would lead to more efficient energy harvesting of the solar spectrum. Fifteen P3HT derivatives were studied using the Density Functional Theory. The conclusion is that it is possible to obtain compounds with significantly smaller bandgaps and with solubility and stability similar to that of P3HT, mostly through the binding of oxygen atoms or conjugated organic groups to the thiophenic ring. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys., 2013     

Structural transitions of nanocrystalline domains in regioregular poly(3‐hexyl thiophene) thin films

The effects of solution processing and thermal annealing on thin film morphology and crystalline structures of regioregular poly(3‐hexyl thiophene) (RR P3HT) are studied in terms of molecular weight (M_w). Using grazing‐incidence X‐ray diffraction, π‐conjugated planes in drop‐cast films from chloroform solutions are found to be preferentially oriented parallel to the substrates regardless of M_w. However, the mesoscale nanocrystalline morphology of the drop‐cast films is significantly affected by M_w, exhibiting a distinctive morphological transition from short nanorods to long nanofibrils above a critical number‐averaged M_w (～ 3.6 kDa). This is probably due to the change in a conformation change from an extended‐chain to a folded‐chain, as M_w of RR P3HT increases. In contrast, spin‐casting of high M_w RR P3HT produces less ordered films with a lower crystallinity and mixed parallel/perpendicular orientations of π‐conjugated planes. The crystallinity and parallel π‐conjugated orientation of RR P3HT in spin‐cast films could be improved by thermal treatments at high‐temperatures either (1) above the glass transition temperature or (2) above the melting temperature of RR 3PHT followed by recrystallization upon cooling under vacuum. However, the charge mobility of the spin‐cast films for a field‐effect transistor application is still lower than that of the drop‐cast films. This would be attributed to the chain oxidation and the development of distinct grain boundaries between RR P3HT nanofibrils during the thermal treatments. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1303–1312, 2007     

Optimization of direct arylation polymerization conditions for the synthesis of poly(3‐hexylthiophene)

Direct arylation polymerization (DArP) is an emerging alternative to Stille and Suzuki polymerizations. This method is attractive as it allows preparation of high‐molecular‐weight conjugated polymers in good yield without the need to metallate monomers. Despite this promise, for poly(3‐hexylthiophene) (P3HT) and related polymers that have β‐protons on the thiophene ring, DArP is known to produce β‐defects, which make the polymer properties different from polymers produced by traditional methods. Here, we demonstrate that DArP conditions based on simple, inexpensive, and bench‐stable reagents can be tuned to limit the amount of defects and produce P3HT with properties remarkably similar to Stille P3HT. Specifically, lowering the reaction temperature, lowering the amount of catalyst, and using a bulkier carboxylate ligand is critical. Optimized conditions include reacting 2‐bromo‐3‐hexylthiophene with 0.25 mol % of Pd(OAc)₂, 1.5 equivalents of K₂CO₃, and 0.3 equivalents of neodecanoic acid in N,N‐dimethylacetamide at 70 °C and give DArP P3HT with ～60% yield, regioregularity of 93.5%, molecular weight of 20 kDa, polydispersity of 2.8, and melting point of 217 °C, providing a very close match to Stille P3HT, which is obtained with 70–80% yield, 91–94% regioregularity, molecular weight of 15–25 kDa, polydispersity of 2.5–2.8, and melting point of 214–221 °C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2660–2668     

Synthesis and characterization of all‐conjugated copolymers of 3‐hexyl‐thiophene and EDOT by grignard metathesis polymerization

Random regioregular copolymers of 3‐hexylthiophene and 3,4‐ethylenedioxythiophene were synthesized by grignard metathesis polymerization. Soluble copolymers were obtained with a high degree of regioregularity and with a monomer ratio close to the feed ratio. A comparison between the optical properties and the thin film morphologies of these copolymers and poly(3‐hexylthiophene) is also presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Regioregular poly[3‐(4‐alkoxyphenyl)thiophene]s

An easy synthetic procedure for soluble poly[3‐(4‐alcoxyphenyl)thiophene]s is reported. The polymers present a high regioregularity degree as determined by both UV–vis spectra and ¹H and ¹³C NMR analysis. Furthermore, X‐ray powder diffraction analysis performed on films of the polymers suggests a π‐stacked packing structure of the macromolecules. Electrical characterization was performed on one of the synthesized polythiophenes on both undoped and doped (with FeCl₃ or iodine) films. The conductivity and charge‐carrier mobility were assessed by current–voltage and field effect measurements. Well‐structured polymer films were obtained simply via spin coating from chloroform solutions and without the need of further processing, unlike other regioregular polythiophenes reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1758–1770, 2007     

Synthesis of poly(m‐phenylene) and poly(m‐phenylene)‐block‐ poly(3‐hexylthiophene) with low polydispersities

Well‐defined poly(m‐phenylene) (PMP), which is poly(1,3‐dibutoxy‐m‐phenylene), was successfully synthesized via Grignard metathesis polymerization. PMP with a reasonably high number‐average molecular weight (M_n) of 25,900 and a very low polydispersity index of 1.07 was obtained. The polymerization of a Grignard reagent monomer, 1‐bromo‐2,4‐dibutoxy‐5‐chloromagnesiobenzene, proceeded in a chain‐growth manner, probably due to the meta‐substituted design producing a short distance between the MgCl and Br groups and thereby making a smooth nickel species (? C? Ni? C? ) transfer to the intramolecular chain end (? C? Ni? Br) over a benzene ring. PMP showed a good solubility in the common organic solvents, such as tetrahydrofuran, CH₂Cl₂, and CHCl₃. Furthermore, a new block copolymer comprised of PMP and poly(3‐hexylthiophene) was also prepared. The tapping mode atomic force microscopy image of the surface of the block copolymer thin film on a mica substrate showed a nanofibril morphology with a clear contrast. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Effects of amorphous poly(3‐hexylthiophene) on active‐layer structure and solar cells performance

A key challenge to the development of polymer‐based organic solar cells is the issue of long‐term stability, which is mainly caused by the unstable time‐dependent morphology of active layers. In this study, poly(3‐hexylthiophene) (P3HT)/[6,6]‐phenyl C60‐butyric acid methyl ester (PCBM) blend is used as a model system to demonstrate that the long‐term stability of power conversion efficiency can be significantly improved by the addition of a small amount of amorphous regiorandom P3HT into semicrystalline regioregular one. The optical properties measured by UV–vis absorption and photoluminescence reveal that regiorandom P3HT can intimately mix with PCBM and prevent the segregation of PCBM. In addition, X‐ray scattering techniques were adopted to evidence the retardation of phase separation between P3HT and PCBM when regiorandom P3HT is added, which is further confirmed by optical microscopy that shows a reduction of large PCBM crystals after annealing at high temperature in the presence of regiorandom P3HT. The improvement of the long‐term stability is attributed to the capability of amorphous P3HT to be thermodynamically miscible with PCBM, which allows the active layer to form a more stable structure that evolves slower and hence decelerates the device decay. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 975–985     

Molecular weight dependent structure and charge transport in MAPLE‐deposited poly(3‐hexylthiophene) thin films

In this work, poly(3‐hexylthiophene) (P3HT) films prepared using the matrix‐assisted pulsed laser evaporation (MAPLE) technique are shown to possess morphological structures that are dependent on molecular weight (MW). Specifically, the structures of low MW samples of MAPLE‐deposited film are composed of crystallites/aggregates embedded within highly disordered environments, whereas those of high MW samples are composed of aggregated domains connected by long polymer chains. Additionally, the crystallite size along the side‐chain (100) direction decreases, whereas the conjugation length increases with increasing molecular weight. This is qualitatively similar to the structure of spin‐cast films, though the MAPLE‐deposited films are more disordered. In‐plane carrier mobilities in the MAPLE‐deposited samples increase with MW, consistent with the notion that longer chains bridge adjacent aggregated domains thereby facilitating more effective charge transport. The carrier mobilities in the MAPLE‐deposited simples are consistently lower than those in the solvent‐cast samples for all molecular weights, consistent with the shorter conjugation length in samples prepared by this deposition technique. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 652–662     

Correlation of charge transport with structural order in highly ordered melt‐crystallized poly(3‐hexylthiophene) thin films

A series of well‐defined poly(3‐hexylthiophene)s (P3HT) of different molecular weight (MW) and high regioregularity was investigated for charge transport properties in as‐cast and melt‐crystallized films. The semicrystalline structure of the P3HT was characterized by X‐ray scattering and Atomic force microscopy. Crystallization by cooling from the melt led to a substantial increase in crystallinity and a stronger alignment of the crystals in comparison to as‐cast films. The increase in crystallinity went along with an increase in hole mobility of up to an order of magnitude as measured by the space charge limited current method. Additionally, the hole mobility depended on the long period of P3HT lamellae and consequently on the MW. In compliance with the long period, the charge carrier mobility first increased with the MW before decreasing again at the onset of chain folding. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 943–951     

The effect of molecular weight on the separation of semiconducting single‐walled carbon nanotubes using poly(2,7‐carbazole)s

The use of selective interactions between conjugated polymers and single‐walled carbon nanotubes has emerged as a promising method for the separation of nanotubes by electronic type. Although much attention has been devoted to investigating polyfluorenes and their ability to disperse semiconducting carbon nanotubes under specific conditions, other polymer families, such as poly(2,7‐carbazole)s, have been relatively overlooked. Poly(2,7‐carbazole)s have been shown to also preferentially interact with semiconducting carbon nanotubes, however a detailed investigation of polymer parameters, such as molecular weight, has not been performed. We have prepared seven different molecular weights of a poly(2,7‐carbazole), from short chain oligomers to high molecular weight polymers, and have investigated their effectiveness at dispersing semiconducting single‐walled carbon nanotubes. Although all polymer chain lengths were able to efficiently exfoliate carbon nanotube bundles using a mild dispersion protocol, only polymers above a certain threshold molecular weight (M_n ～ 27 kDa) were found to exhibit complete selectivity for semiconducting nanotubes, with no observable signals from metallic species. Additionally, we found the quality of separation to be strongly dependent on the ratio of polymer to carbon nanotube. Contrary to previous reports, we have found that an excess of poly(2,7‐carbazole) leads to incomplete removal of metallic carbon nanotubes. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2510–2516     

Spectroscopic properties of poly(9,9‐dioctylfluorene) thin films possessing varied fractions of β‐phase chain segments: enhanced photoluminescence efficiency via conformation structuring

Poly(9,9‐dioctylfluorene) (PFO) is a widely studied blue‐emitting conjugated polymer, the optoelectronic properties of which are strongly affected by the presence of a well‐defined chain‐extended “β‐phase” conformational isomer. In this study, optical and Raman spectroscopy are used to systematically investigate the properties of PFO thin films featuring a varied fraction of β‐phase chain segments. Results show that the photoluminescence quantum efficiency (PLQE) of PFO films is highly sensitive to both the β‐phase fraction and the method by which it was induced. Notably, a PLQE of ～69% is measured for PFO films possessing a ～6% β‐phase fraction induced by immersion in solvent/nonsolvent mixtures; this value is substantially higher than the average PLQE of ～55% recorded for other β‐phase films. Furthermore, a linear relationship is observed between the intensity ratios of selected Raman peaks and the β‐phase fraction determined by commonly used absorption calibrations, suggesting that Raman spectroscopy can be used as an alternative means to quantify the β‐phase fraction. As a specific example, spatial Raman mapping is used to image a mm‐scale β‐phase stripe patterned in a glassy PFO film, with the extracted β‐phase fraction showing excellent agreement with the results of optical spectroscopy. © 2016 The Authors. Journal of Polymer Science Part B: Polymer Physics Published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1995–2006     

Control of aggregate formation in poly(3‐hexylthiophene) by solvent,molecular weight,and synthetic method

Aggregate formation in poly(3‐hexylthiophene) depends on molecular weight, solvent, and synthetic method. The interplay of these parameters thus largely controls device performance. In order to obtain a quantitative understanding on how these factors control the resulting electronic properties of P3HT, we measured absorption in solution and in thin films as well as the resulting field effect mobility in transistors. By a detailed analysis of the absorption spectra, we deduce the fraction of aggregates formed, the excitonic coupling within the aggregates, and the conjugation length within the aggregates, all as a function of solvent quality for molecular weights from 5 to 19 kDa. From this, we infer in which structure the aggregated chains pack. Although the 5 kDa samples form straight chains, the 11 and 19 kDa chains are kinked or folded, with conjugation lengths that increase as the solvent quality reduces. There is a maximum fraction of aggregated chains (about 55 ± 5%) that can be obtained, even for poor solvent quality. We show that inducing aggregation in solution leads to control of aggregate properties in thin films. As expected, the field‐effect mobility correlates with the propensity to aggregation. Correspondingly, we find that a well‐defined synthetic approach, tailored to give a narrow molecular weight distribution, is needed to obtain high field effect mobilities of up to 0.01 cm²/Vs for low molecular weight samples (=11 kDa), while the influence of synthetic method is negligible for samples of higher molecular weight, if low molecular weight fractions are removed by extraction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and characterization of poly(1,4‐bis((E)‐2‐(3‐dodecylthiophen‐2‐yl)vinyl)benzene) derivatives

New amorphous semiconducting copolymers, poly(9,9‐dialkylfluorene)‐alt‐(3‐dodecylthienyl‐divinylbenzene‐3‐dodecylthienyl) derivatives (PEFTVB and POFTVB), were designed, synthesized, and characterized. The structure of copolymers was confirmed by H NMR, IR, and elemental analysis. The copolymers showed very good solubility in organic solvents and high thermal stability with high T_g of 178–185 °C. The weight average molecular weight was found to be 107,900 with polydispersity of 3.14 for PEFTVB and 76,700 with that of 3.31 for POFTVB. UV–vis absorption studies showed the maximum absorption at 428 nm (in solution) and 435 nm (in film) for PEFTVB and at 430 nm (in solution) and 436 nm (in film) for POFTVB. Photoluminescence studies showed the emission at 498 nm (in solution) and 557 nm (in film) for PEFTVB and at 498 nm (in solution) and 536 nm (in film) for POFTVB. The solution‐processed thin‐film transistors showed the carrier mobility of 2 × 10^?4 cm² V^?1 s^?1 for PEFTVB‐based devices and 2 × 10^?5 cm² V^?1 s^?1 for POFTVB‐based devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3942–3949, 2010     

Synthesis of multiarmed poly(3‐hexyl thiophene) star polymer with microgel core by GRIM and ATRP methods

Regioregular poly(3‐hexyl thiophene) (rr‐P3HT)‐based star polymers were synthesized by a crosslinking reaction of the linear rr‐P3HT macroinitiator and ethylene glycol dimethacrylate (EGDMA) crosslinker through Ru‐based atom transfer radical polymerization (ATRP), where the rr‐P3HT macroinitiator was prepared by Grignard metathesis method (GRIM) followed by end functionalization of the ATRP initiator with chlorophenylacetate (CPA) to the rr‐P3HT. Relatively high molecular weight of the star polymers were obtained (M_p = 8,988,000 g/mol), which consisted of large numbers of the rr‐P3HT arm chains radiating from the EGDMA‐based microgel core. The yield of the star polymers were strongly affected by the added amount of the EGDMA crosslinker. The crystalline structure of the rr‐P3HT by intermolecular π‐π stacking interaction gradually decreased as the star polymer formed, which was confirmed by differential scanning calorimeter (DSC), atomic force microscopy (AFM), and electro‐optical analyses. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of electron radiation and triallyl isocyanurate on the average molecular weight and crosslinking of poly(ε‐caprolactone)

Investigation of the effect of electron radiation on the flow rate and average molecular weight of poly(ε‐caprolactone) (PCL) as well as on formation of the gel fraction of this polymer being irradiated in the presence of triallyl isocyanurate (TAIC) was the aim of the present paper. It was found that PCL macromolecules upon the electron radiation underwent both degradation and linking, because of which the polymer molecular weight increased. The processes associated with elongation of the polymer chains prevailed over the degradation ones. It was also found that PCL irradiated in the presence of TAIC underwent crosslinking resulting in formation of a significant amount of the gel fraction. The largest amount of this fraction was created upon the radiation with the dose of 60 kGy, which was confirmed by the results of determination of the swelling index. Changes in properties of PCL, occurring because of the electron radiation, are important for controlling viscosity of polymeric materials during processing of these materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of highly regioregular poly[3‐(4‐alkoxyphenyl)‐thiophene]s by oxidative catalysis using copper complexes

A novel, easy, and cost‐effective synthetic procedure is reported for the production of very highly regioregular poly[3‐(4‐alkoxyphenyl)thiophene]s by means of oxidative coupling. Four copper complexes were synthesized and used as catalysts to obtain polymers with higher regioregularity compared to the previous oxidative coupling methodologies reported in the literature and similar to that obtained by McCullough and Rieke methods in the synthesis of poly‐3‐alkylthiophenes. The regioregularity of the synthesized polymers was investigated by UV–Visible characterization on polymer thin films and ¹H NMR analysis. The remarkable potentialities of these polymers have emerged from field‐effect transistor mobility measurements operated on devices with bottom‐contact configuration and hexamethyldisilazane‐treated SiO₂ gate dielectric, showing a well‐defined p‐type field‐effect response and maximum mobility values in air higher than 10^?4 cm² V^?1 s^?1. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4351–4360