Macrophage uptake of core-shell nanoparticles surface modified with poly(ethylene glycol)

The in vitro uptake of core-shell nanoparticles encapsulated in a bio-macromolecular nanoshell assembled from multilayered polyelectrolytes was studied. Sulfate modified fluorescent polystyrene nanobeads (diameter 200 nm) were used as a solid core upon which charged multilayers of poly-l-lysine, chitosan, and heparin sulfate are electrostatically deposited utilizing a layer-by-layer (LbL) self-assembly process. The nanoshell composed of the multilayered polyelectrolytes was modified with poly(ethylene glycol) (PEG) of varying molecular weights (either MW 2000, 5000, or 20 000 Da) to form a hydrophilic and long-circulating nanoparticle. The assembly of the nanoshell was confirmed by zeta potential, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The reversal in charge upon the deposition of alternating polyelectrolytes was observed by zeta potential measurements. The nanometer thickness of the nanoshell was confirmed by TEM. The presence of the (C-C-O)(n)() backbone in PEG at the surface of the nanoshell was confirmed by the increase in (C-O,N) peak area concentrations compared to (C-C) peak area, and these results were gathered from XPS. In vitro studies between suspension macrophages and core-shell nanoparticles were performed to determine how the hydrophilicity and the charge on the nanoshell can promote or reduce uptake. Results showed that after 24 h uptake was decreased 3-fold when PEGs of 2000 and 20 000 Da were chemisorbed to the nanoshell, as opposed to a nanoshell with either a positive or highly negative charge. Confocal microscopy aided in verifying that core-shell nanoparticles were internalized within the cell cytoplasm and were not attached to the cell surface. Protein adhesion studies with bovine serum albumin were performed to determine the relationship between surface charge and opsonization of core-shell nanoparticles. It was found that a hydrophilic surface with a low negative charge reduced protein adsorption and uptake. The in vitro uptake of macrophages and protein adsorption onto core-shell nanoparticles formed using layer-by-layer assembly has not been previously studied.     

Preparation of novel bovine hemoglobin surface-imprinted polystyrene nanoparticles with magnetic susceptibility

In this research, a surface imprinting strategy has been adopted in protein imprinting. Bovine hemoglobin surface-imprinted polystyrene (PS) nanoparticles with magnetic susceptibility have been synthesized through multistage core-shell polymerization system using 3-aminophenylboronic acid (APBA) as functional and cross-linking monomers. Superparamagnetic molecularly imprinted polystyrene nanospheres with poly(APBA) thin films have been synthesized and used for the first time for protein molecular imprinting in an aqueous solution. The magnetic susceptibility is imparted through the successful encapsulation of Fe₃O₄ nanoparticles. The morphology, adsorption, and recognition properties of superparamagnetic molecularly imprinted polymers (MIPs) have been investigated using transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, and vibrating sample magnetometer. Rebinding experimental results show that poly(APBA) MIPs-coated superparamagnetic PS nanoparticles have high adsorption capacity for template protein bovine hemoglobin and comparatively low nonspecific adsorption. The imprinted superparamagnetic nanoparticles could easily reach the adsorption equilibrium and achieve magnetic separation in an external magnetic field, thus avoiding some problems of the bulk polymer.     

Integration of carboxyl modified magnetic particles and aqueous two-phase extraction for selective separation of proteins

Both of the magnetic particle adsorption and aqueous two-phase extraction (ATPE) were simple, fast and low-cost method for protein separation. Selective proteins adsorption by carboxyl modified magnetic particles was investigated according to protein isoelectric point, solution pH and ionic strength. Aqueous two-phase system of PEG/sulphate exhibited selective separation and extraction for proteins before and after magnetic adsorption. The two combination ways, magnetic adsorption followed by ATPE and ATPE followed by magnetic adsorption, for the separation of proteins mixture of lysozyme, bovine serum albumin, trypsin, cytochrome C and myloglobin were discussed and compared. The way of magnetic adsorption followed by ATPE was also applied to human serum separation.     

Application of Crosslinked Ionic Poly(Vinyl Alcohol) Nanogel as Adsorbents for Water Treatment

Core-shell smart ionic nanogels based on poly(vinyl alcohol) (PVA) core and poly(N-isopropylacrylamide/acrylic acid) p(NIPAm-AAc) shell particles were successfully synthesized through a one-step surfactant-free emulsion polymerization method (SFEP). Different mole ratios of p(NIPAm-AAc) shells were synthesized. The morphologies of PVA/p(NIPAm-AAc) nanogels were investigated by transmission electron microscope (TEM). The data showed the formation of spherical nanoparticles and well-defined core-shell nanogels. PVA/p(NIPAm-AAc) core-shell nanogels were applied as a novel polymeric adsorbent to remove heavy metal pollutants from aqueous solution. Copper(II) (Cu²⁺) ions were selected as the target pollutant to evaluate these nanoparticles’ adsorption capability. The influence of the uptake conditions such as pH, weight ratio of nanoparticles, time, initial feed concentration, and adsorption temperature on the metal ion binding capacity of nanogels was also tested. Adsorption equilibrium data were calculated according to Langmuir and Freundlich isotherms. It was found that the sorption of Cu²⁺ was better suited to the Freundlich adsorption model than the Langmuir adsorption model. Also, the selectivity of the nanogels toward the different metal ions such lead (Pb²⁺) and cadmium (Cd²⁺) were tested. The maximum of Cu²⁺ ions adsorbed on to PVA/p(NIPAm-AAc) core-shell nanogels adsorbent was 94 mg/g obtained under simple and fast experimental conditions, indicating these nanogels can be used as effective and practical polymeric adsorbents.     

Highly selective isolation and purification of heme proteins in biological samples using multifunctional magnetic nanospheres

Magnetic particles with suitable surface modification are capable of binding proteins selectively, and magnetic separations have advantages of rapidity, convenience, and high selectivity. In this paper, new magnetic nanoparticles modified with imidazolium ionic liquid (Fe₃O₄@SiO₂@ILs) were successfully fabricated. N‐Methylimidazolium was immobilized onto silica‐coated magnetic nanoparticles via γ‐chloropropyl modification as a magnetic nanoadsorbent for heme protein separation. The particle size was about 90 nm without significant aggregation during the preparation process. Hemoglobin as one of heme proteins used in this experiment was compared with other nonheme proteins. It has been found that the magnetic nanoparticles can be used for more rapid, efficient, and specific adsorption of hemoglobin with a binding capacity as high as 5.78 mg/mg. In comparison with other adsorption materials of proteins in the previous reports, Fe₃O₄@SiO₂@ILs magnetic nanoparticles exhibit the excellent performance in isolation of heme proteins with higher binding capacity and selectivity. In addition, a short separation time makes the functionalized nanoparticles suitable for purifying unstable proteins, as well as having other potential applications in a variety of biomedical fields.     

Magnetic hydroxyapatite nanoparticles: An efficient adsorbent for the separation and removal of nitrate and nitrite ions from environmental samples

A novel type of magnetic nanosorbent, hydroxyapatite‐coated Fe₂O₃ nanoparticles was synthesized and used for the adsorption and removal of nitrite and nitrate ions from environmental samples. The properties of synthesized magnetic nanoparticles were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X‐ray powder diffraction. After the adsorption process, the separation of γ‐Fe₂O₃@hydroxyapatite nanoparticles from the aqueous solution was simply achieved by applying an external magnetic field. The effects of different variables on the adsorption efficiency were studied simultaneously using an experimental design. The variables of interest were amount of magnetic hydroxyapatite nanoparticles, sample volume, pH, stirring rate, adsorption time, and temperature. The experimental parameters were optimized using a Box–Behnken design and response surface methodology after a Plackett–Burman screening design. Under the optimum conditions, the adsorption efficiencies of magnetic hydroxyapatite nanoparticles adsorbents toward NO₃^? and NO₂^? ions (100 mg/L) were in the range of 93–101%. The results revealed that the magnetic hydroxyapatite nanoparticles adsorbent could be used as a simple, efficient, and cost‐effective material for the removal of nitrate and nitrite ions from environmental water and soil samples.     

Polysaccharide-modified iron oxide nanoparticles as an effective magnetic affinity adsorbent for bovine serum albumin

The magnetic separation technique based on magnetic iron oxide nanoparticles (MNPs) has potential applications in protein adsorption and purification, enzyme immobilization, cell sorting, nucleic acid detachment, and drug release. However, the naked MNPs are often insufficient for their hydrophilicity, colloidal stability, and further functionalization. To overcome these limitations, chitosan was firstly carboxymethylated and then covalently conjugated on the surface of the MNPs ranging in size from about 5 to 15 nm, which were prepared by co-precipitating iron (II) and iron (III) in alkaline solution and then treating under hydrothermal conditions. It was found that such modification did not result in the phase change of the MNPs, and the resultant modified nanoparticles were still superparamagnetic. In particular, the colloidal stability of MNPs in aqueous suspension was improved after the surface modification. By investigating the adsorption of bovine serum albumin (BSA) on the modified MNPs, it was observed that the adsorption capacity of the BSA on the modified MNPs increased rapidly within several minutes and then reached the maximum value at about 10 min. The adsorption equilibrium isotherm could be fitted well by the Langmuir model. The medium pH affected greatly the adsorption of the BSA. The maximum adsorption of the BSA occurred at the pH value close to the isoelectric point of the BSA, with a saturation adsorption amount of 94.45 mg/g (25 °C). For the BSA feed concentration of 1.017 mg/ml, a high desorption percentage of 91.5% could be achieved under an alkaline condition (pH 9.4).     

Novel thionin-functionalised core shell magnetic nanoparticles for dispersive solid-phase extraction of Hg(II) in food and water samples

To develop an accurate and precise method for separation and pre-concentration of Hg(II), a novel thionin functionalised core shell structure magnetic material has been prepared and characterised. The extraction ability of the material was evaluated by magnetic solid-phase extraction coupled with inductively coupled plasma mass spectrometry determination of Hg(II) in food and water samples. Combining the advantages of magnetic separation with selective extraction of thionin towards Hg(II), the material exhibits enhanced enrich selectivity and efficiency for Hg(II). The experimental parameters influencing Hg(II) extraction efficiency, including pH of the aqueous solution, the dosage of the adsorbent, extraction time and sample volume, were systematically investigated. Under the optimised conditions, concentration of Hg(II) at 1.0 μg L^?1 can be successfully enriched by the material without the interference of the common co-existing ions. The enrichment factor and adsorption capacity were 250 and 75.2 mg g^?1, and precise of the method was confirmed by analysing the spiked food, water samples and standard water reference samples with the recoveries of 92.5–101.8%.     

金纳米修饰毛细管电泳分离氨基苯甲酸

报道了一种金纳米修饰毛细管电泳分离、测定氨基苯甲酸的新方法。采用制备的金纳米进行了石英毛细管修饰。探讨了修饰金纳米浓度、修饰时间以及缓冲溶液加入一定浓度的金纳米对三种氨基苯甲酸分离和测定的影响,优化了分离电压、酸度以及缓冲溶液浓度等实验条件。结果表明金纳米的存在,显著的改进了氨基苯甲酸分离的选择性,增强了分离效率。在优化的实验条件下,进行了邻、间、对三种氨基苯甲酸的分离和测定。线性浓度范围为0.5–40 µg·mL,相关系数0.9978-0.9992。检测限(S/N = 3) 为0.1-0.5µg·mL。     

Elaboration of fluorescent and highly magnetic submicronic polymer particles via a stepwise heterocoagulation process

Using the stepwise heterocoagulation concept, fluorescent and highly magnetic submicronic core-shell polymer particles were prepared. For this purpose a negatively charged oil-in-water magnetic emulsion was first modified by adsorbing the poly(ethyleneimine) (PEI). Secondly, low glass transition temperature (T _g=10°C) anionic film-forming nanoparticles were adsorbed onto the cationic magnetic droplets. Finally the encapsulation was induced by heating the heterocoagulates above the T _g of the film-forming nanoparticles. To produce labeled magnetic particles, fluorescent nanoparticles and film-forming nanoparticles were simultaneously adsorbed. PEI adsorption was investigated. Also investigated was the influence of the amount of film-forming nanoparticles and fluorescent nanoparticles on the encapsulation efficiency.     

Pre-concentration of trace amounts of manganese in water samples based on (1-(2-pyridylazo)-2-naphthol) modified magnetic nanoparticles

A simple procedure based on magnetic nanoparticles has been developed for analytical purposes. In this method, 1-(2-pyridylazo)-2-naphthol (PAN)-modified magnetic nanoparticles (MNPs) were used for separation and pre-concentration of manganese(II) ions from aqueous samples. This method combines the use of a solution solvent with separation of magnetic nanoparticles from sample solution using a magnet. The influence of different parameters, such as amount of extractant (PAN) loaded on the nanoparticles, pH of solution, adsorption time, amount of modified nanoparticle, type and amount of eluents for desorption of manganese from magnetic nanoparticles were evaluated. The effect of various cationic and anionic interferences on the percentage recovery of manganese was also studied. Manganese ions were adsorped from a solution at pH 9.5 and desorbed from nanoparticles with 10?mL of DMSO?:?HNO₃ (1?:?1, v/v). The detection limit of the proposed method was found to be 0.11?µg?L^?1. The method was employed to recover and determine the level of manganese in different water samples.     

Preparation and characterization of biodegradable nanoparticles based on amphiphilic poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) triblock copolymer

Amphiphilic triblock copolymers of poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) (PHB-PEG-PHB) were directly synthesized by the ring-opening copolymerization of β-butyrolactone monomer using PEG as macroinitiator. Their structure, thermal properties and crystallization were investigated by ¹H NMR, differential scanning calorimetry (DSC) and X-ray diffraction. It was found that both PHB and PEG blocks were miscible. With the increase in the PHB block length, the triblock copolymers became amorphous because amorphous PHB block remarkably depressed the crystallization of the PEG block. Biodegradable nanoparticles with core-shell structure were prepared in aqueous solution from the amphiphilic triblock copolymers, and characterized by ¹H NMR, SEM and fluorescence. The hydrophobic PHB segments formed the central solid-like core, and stabilized by the hydrophilic PEG block. The nanoparticle size was close related to the initial concentrations of the nanoparticle dispersions and the compositions of the triblock copolymers. Moreover, the PHB-PEG-PHB nanoparticles also showed good drug loading properties, which suggested that they were very suitable as delivery vehicles for hydrophobic drugs.     

Highly sensitive electrochemical immunoassay for human IgG using double-encoded magnetic redox-active nanoparticles

A new sandwich-type electrochemical immunoassay was developed for the detection of human IgG using doubly-encoded and magnetic redox-active nanoparticles as recognition elements on the surface of a glassy carbon electrode modified with anti-IgG on nanogold particles. The recognition elements were synthesized by coating magnetic Fe₃O₄ nanoparticles with Prussian blue nanoparticles and then covered with peroxidase-labeled anti-IgG antibodies (POx-anti-IgG) on Prussian blue nanoparticles. The immunoelectrode displays very good electrochemical properties towards detection of IgG via using double-encoded magnetic redox-active nanoparticles as trace and hydrogen peroxide as enzyme substrate. Its limit of detection (10 pmol·L^?1) is 10-fold better than that of using plain POx-anti-IgG secondary antibodies. The method was applied to the detection of IgG in serum samples, and an excellent correspondence with the reference values was found.     

The Synthesis of Magnetic Lysozyme‐Imprinted Polymers by Means of Distillation–Precipitation Polymerization for Selective Protein Enrichment

A protein imprinting approach for the synthesis of core–shell structure nanoparticles with a magnetic core and molecularly imprinted polymer (MIP) shell was developed using a simple distillation–precipitation polymerization method. In this work, Fe₃O₄ magnetic nanoparticles were first synthesized through a solvothermal method and then were conveniently surface‐modified with 3‐(methacryloyloxy)propyltrimethoxylsilane as anchor molecules to donate vinyl groups. Next a high‐density MIP shell was coated onto the surface of the magnetic nanoparticles by the copolymerization of functional monomer acrylamide (AAm), cross‐linking agent N,N′‐methylenebisacrylamide (MBA), the initiator azodiisobutyronitrile (AIBN), and protein in acetonitrile heated at reflux. The morphology, adsorption, and recognition properties of the magnetic molecularly imprinted nanoparticles were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and rebinding experiments. The resulting MIP showed a high adsorption capacity (104.8 mg g^?1) and specific recognition (imprinting factor=7.6) to lysozyme (Lyz). The as‐prepared Fe₃O₄@Lyz‐MIP nanoparticles with a mean diameter of 320 nm were coated with an MIP shell that was 20 nm thick, which enabled Fe₃O₄@Lyz‐MIP to easily reach adsorption equilibrium. The high magnetization saturation (40.35 emu g^?1) endows the materials with the convenience of magnetic separation under an external magnetic field and allows them to be subsequently reused. Furthermore, Fe₃O₄@Lyz‐MIP could selectively extract a target protein from real egg‐white samples under an external magnetic field.     

新型有机荧光染料嵌合的核壳荧光纳米材料的研制

采用油包水的反相微乳液方法,首次以羊抗人免疫球蛋白(IgG)标记的异硫氰酸荧光素(FITC)为核材料,成功地制备了FITC的核壳荧光纳米颗粒,克服了采用传统方法制备核壳荧光纳米颗粒中存在的荧光染料泄露的问题.制备的这种核壳荧光纳米颗粒比细胞小很多,且具有生物亲和性,可为纳米生物传感器件提供新型材料.基于该核壳荧光纳米颗粒的标记方法也为生物医学提供了一种新型的非同位素分析方法.     

Mechanism and kinetics of protein transport in chromatographic media studied by confocal laser scanning microscopy. Part I. The interplay of sorbent structure and fluid phase conditions

An experimental study on the interplay of sorbent structure and fluid phase conditions (pH) has been carried out examining adsorption and transport of bovine serum albumin (BSA) and a monoclonal antibody (IgG 2a) on SP Sepharose Fast Flow and SP Sepharose XL. SP Sepharose Fast Flow is characterised by a relatively open pore network, while SP Sepharose XL is a composite structure with ligand-carrying dextran chains filling the pore space. Both adsorbents have similar ionic capacity. Protein transport and adsorption profiles were evaluated using confocal laser scanning microscopy. Under all investigated conditions, BSA uptake could be adequately explained by a pore diffusion mechanism. The adsorption profiles obtained for IgG 2a, however, indicated that changes in fluid phase conditions as well as a change in the solid phase structure could result in a more complex uptake mechanism as compared to pore diffusion alone. This mechanism results in a fast transport of proteins into the adsorbent, followed by an overshoot of protein in the center of the sorbent and a setback towards a homogeneous adsorption profile.     

Analysis of spherical polyelectrolyte brushes by small angle X-ray scattering

Spherical polyelectrolyte brushes （SPBs） with PS core and poly（acrylic acid） （PAA） brushes were prepared and analyzed by SAXS in this article. A radial electron density profile of SPB was brought up, which fits well with the SAXS result and shows a core-shell structure. The effect of pH on SPB form was represented by SAXS and it proves that the chains of SPB will stretch in response to increased pH owning to the increased electrostatic repulsion. SPBs immobilized with magnetic nanoparticles or bovine serum albumin （BSA） were prepared and analyzed by SAXS as well. SAXS could characterize the changes of electron density inside brushes of SPBs due to the immobilization of magnetic nanoparticles or BSA. This provides significant supports for further application of immobilized metal nanoparticles or proteins.     

Fabrication of SAPO‐34 with Tuned Mesopore Structure

Crystalline SAPO‐34 molecular sieves with hierarchical network were synthesized employing polyethylene glycol (PEG) as the meso‐generating agent via a self‐assembly strategy. XRD, FESEM, N₂ adsorption‐desorption and FT‐IR spectroscopic analyses showed that PEG co‐template has a decisive role in tailoring the pore structure and producing a tuned structure from microporous towards the mesoporous structure. Also, addition of PEG favored the formation of more uniform and smaller crystals than the conventional SAPO‐34. In fact, PEG did not only control the size of crystals due to its crystal growth inhibiting (CGI) effect but also modified the morphology of the crystals and improved CSD (crystal size distribution) along with induction of mesopores into the porous structure. The modified SAPO‐34 would be recommended for selective formation of light olefins through the acid‐catalyzed reactions, such as the conversion of methanol to olefins/propylene (MTO/MTP) and propane dehydrogenation (PDH) to produce olefins with higher selectivity and catalyst stability than the conventional SAPO‐34.     

Adsorption of chiral aromatic amino acids onto carboxymethyl-β-cyclodextrin bonded Fe(3)O(4)/SiO(2) core-shell nanoparticles

Surface of magnetic silica nanoparticles is modified by grafting with carboxymethyl-β-cyclodextrin (CM-β-CD) via carbodiimide activation. The functionalized magnetic core-shell nanoparticles (MNPs) are characterized by Transmission Electron Microscopy (TEM), Fourier Transform Infra Red (FTIR) spectroscopy, X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS) and Vibrating Sample Magnetometer (VSM). These nano-sized particles are scrutinized for adsorption of certain chiral aromatic amino acid enantiomers namely, d- and l-tryptophan (Trp), d- and l-phenylalanine (Phe) and d- and l-tyrosine (Tyr) from phosphate buffer solutions. Adsorption capacities of the coated magnetic nanoparticles toward amino acid enantiomers are in the order: l-Trp>l-Phe>l-Tyr and under the same condition, adsorption capacities are higher for l-enantiomers than the corresponding d-enantiomers. All the equilibrium adsorption isotherms are fitted well to Freundlich model. FTIR studies depict significant changes after adsorption of amino acids onto nanoparticles. The stretching vibration frequencies of NH bonds of the amino acid molecules are changed with complex formation through host-guest interaction. The structure and hydrophobicity of amino acid molecules emphasize the interactions between amino acid molecules and the nano-adsorbents bearing cyclodextrin, thus play important roles in the difference of their adsorption behaviors.     

Synthesis and characterization of a novel quercetin magnetic molecularly imprinted polymer via reversible addition fragmentation chain transfer strategy

Molecularly imprinted polymer (MIP) will be modified on the surface of the core-shell structure silica magnetic nanoparticles, during which quercetin is used as a template molecule, acrylamide as a functional monomer, azo-bisisobutyronitrile as an initiator and ethylene glycol dimethacrylate as a cross-linker, to synthesize highly efficient and selective quercetin magnetic molecularly imprinted nanoparticles via Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization. FT-IR and X-ray diffraction (XRD) patterns are used to monitor the reaction and show the characteristic groups of each reaction step. Compared with the conventional bulk polymerization (2.7029 mg/g), the adsorption test showed that the MMIP by RAFT activity controlled polymerization had better absorption capacity for quercetin which the saturated adsorption amount was 4.8471 mg/g. Kinetic studies indicate that pseudo first order model is suitable to describe the adsorption mechanism. Thermodynamics experiment revealed that Langmuir model was more applied for explains the adsorption of quercetin onto magnetic molecularly imprinted polymer.