Thermal behaviour and fragility of Sb<Subscript>2</Subscript>O<Subscript>3</Subscript>-containing zinc borophosphate glasses

Thermal behaviour of the glass series (100-x)[50ZnO-10B₂O₃-40P₂O₅]·xSb₂O₃ (x=0-42 mol%) and (100-y)[60ZnO-10B₂O₃-30P₂O₅]·ySb₂O₃ (y=0-28 mol%) was investigated by DSC and TMA. The addition of Sb₂O₃ results in a decrease of the glass transition temperature and crystallization temperature in both compositional series. All glasses crystallize on heating in the temperature range of 522–632°C. Thermal expansion coefficient of the glasses monotonously increases with increasing Sb₂O₃ content in both series and varies within the range of 6.6–11.7 ppm °C⁻¹. From changes of thermal capacity within the glass transition region it was concluded that with increasing Sb₂O₃ content the ‘fragility’ of the studied glasses increases.     

Thermal properties and stability of lithium titanophosphate glasses

DTA was used to study thermal properties and thermal stability of (50-x)Li₂O-xTiO₂-50P₂O₅ (x=0–10 mol%) and 45Li₂Ot-yTiO₂-(55-y)P₂O₅ (y=5–20 mol%) glasses. The addition of TiO₂ to lithium phosphate glasses results in a non-linear increase of glass transition temperature. All prepared glasses crystallize under heating within the temperature range of 400–540°C. The lowest tendency towards crystallization have the glasses with x=7.5 and y=10 mol% TiO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were LiPO₃, Li₄ P₂O₇, TiP₂O₇ and NASICON-type LiTi₂(PO₄)₃. DTA results also indicated that the maximum of nucleation rate for 45Li₂O-5TiO₂-50P₂O₅ glass is close to the glass transition temperature.     

Effect of Er<Subscript>2</Subscript>O<Subscript>3</Subscript> on thermal stability of oxyfluoride glass

Glasses have been synthesized in the system SiO₂–Al₂O₃–Na₂O–AlF₃–LaF₃–Er₂O₃. A base glass (in mol% 67SiO₂–9Al₂O₃–20Na₂O–Al₂F₆–3La₂F₆) was modified by 0.5, 0.75, 1, 1.25, 1.5, 2 and 5 mol% Er₂O₃, respectively. Glasses were prepared by conventional fusion method from 20 g batches. The glass transition temperature (T _g), the jump-like changes of the specific heat (ΔC _p) accompanying the glass transition and the enthalpy of crystallization (ΔH) were calculated. DTA measurements clearly reveal that the increase of the Er₂O₃ content in the glass changes the effects of crystallization and diminishes the thermal stability of the glassy network. In the same time the changes in the transition temperature are observed. The formation of NaLaF₄ and Na_1.45La_9.31(SiO₄)₆(F_0.9O_1.1) as a main phase was confirmed. The diminishing of the thermal stability was connected with erbium which incorporated into Na_1.45La_9.31(SiO₄)₆(F_0.9O_1.1) structure.     

Effect of nucleating agents on the crystallization of Li<Subscript>2</Subscript>O-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system glass

The processes of nucleation of Li₂O-Al₂O₃-SiO₂ glasses with TiO₂ and TiO₂+ZrO₂ as nucleating agents were discussed. The DTA peak temperature and DTA peak height shown a strong dependence on the nucleation temperature in the glass with TiO₂, while in the glass with TiO₂+ZrO₂ this tendency was small. The optimum nucleation temperatures were 745 and 760°C for two glasses. It suggested that with TiO₂+ZrO₂ as nucleating agents, the crystallization had lower sensitivity for nucleation temperature, and the glass had higher nucleation efficiency than with TiO₂.     

Kinetics of the pyrolysis and combustion of göynük oil shale

Thermal behaviour of the glass series (100–y)[0.5ZnO·0.1B₂O₃·0.4P₂O₅]·yTiO₂ (with y=0–39 mol% TiO₂) was investigated by DSC and TMA. The addition of TiO₂ results in a non-linear increase of glass transition temperature. The compositional dependences of thermal stability, evaluated by two criteria exhibit two maxima for the glasses doped with 10.7 and 35.9 mol% TiO₂. All the glasses crystallize on heating in the temperature range of 576–670°C. The crystallization mechanism was studied at the glasses with 19.4 and 35.9 mol% TiO₂ and the results showed that surface nucleation mechanism prevails in these glasses over the internal one.     

Chemical durability of MoO<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> and K<Subscript>2</Subscript>O-MoO<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Thermal and chemical durability studies of the phosphate glasses belonging to the binary MoO₃-P₂O₅ and the ternary K₂O-MoO₃-P₂O₅ systems are reported. The chemical resistant attack tests carried out on the free alkaline MoO₃-P₂O₅ glasses show that the glass associated with the P/Mo ratio 2 has the high chemical durability. It shows also a high glass transition temperature value. The above findings are interpreted in terms of the cross-link density of the glasses and the strength of the M-O bonds (M=P, Mo). The influence of K₂O addition on the properties (density, T _g, durability) of this binary high water resistant glass is studied. It is found that the chemical durability along with the other physical properties are reduced by the incroporation of K₂O in the glass matrix. The results were explained by assuming the formation of non-bridging oxygens and weak bonds. The mechanism of the dissolution of these glasses is proposed.     

EPR investigation and thermal study of yA<Subscript>2</Subscript>O-(1-<Emphasis Type="Italic">y</Emphasis>)[0.25(WO<Subscript>3</Subscript>)<Subscript>2</Subscript>-0.75(P<Subscript>2</Subscript>O<Subscript>5</Subscript>)] (A=Li,Na) glasses

Summary Glasses belonging to the series yA₂O-(1-y)[0.25(WO₃)_2-0.75P₂O₅] (y=0.10-0.60) are elaborated. DTA experiments reveal that the glass-network of the glasses are broken with increasing of modifier content. EPR spectra show the presence of two signals due to W⁵⁺ and Mo⁵⁺, as impuritie. The intensity of these EPR centres decreases when the concentration of A₂O increases. The variation of T_g upon the modifier content is ascribed to structural changes occurring in the matrix of these glasses.     

Some studies on the phase formation and kinetics in TiO<Subscript>2</Subscript> containing lithium aluminum silicate glasses nucleated by P<Subscript>2</Subscript>O<Subscript>5</Subscript>

Lithium aluminum silicate (LAS) glasses of compositions (wt%) 10.6Li₂O–71.7SiO₂–7.1Al₂O₃–4.9K₂O–3.2B₂O₃–1.25P₂O₅–1.25TiO₂ were prepared by the melt quench technique. Crystallization kinetics was investigated by the method of Kissinger and Augis–Bennett using differential thermal analysis (DTA). Based on the DTA data, glass ceramics were prepared by single-, two-, and three-step heat treatment schedules. The interdependence of different phases formed, microstructure, thermal expansion coefficient (TEC) and microhardness (MH) was investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), thermo-mechanical analysis (TMA), and microhardness (MH) measurements. Crystallization kinetics revealed that Li₂SiO₃ is the kinetically favored phase with activation energy of 91.10 kJ/mol. An Avrami exponent of n = 3.33 indicated the dominance of bulk crystallization. Based upon the formation of phases, it was observed that the two-stage heat treatment results in highest TEC glass ceramics. The single-step heat treatment yielded glass ceramics with the highest MH.     

The effect of PO<Subscript>2,5</Subscript> and AlO<Subscript>1,5</Subscript> additions on structural changes and crystallization behavior of SiO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> sol-gel derived glasses and thin films

SiO₂-TiO₂-PO_2,5 (STP) and SiO₂-TiO₂-AlO_1,5 (STA) glasses were prepared by sol-gel processing. Their infrared absorption spectra (IR), differential thermal analysis curves (DTA) and X-ray diffraction patterns (XRD) have been recorded. In the SiO₂-TiO₂ system, the chemical homogeneity of the sol-gel glass could be evaluated by the relative concentration of Si-O-Ti heterocondensation comparing to Si-O-Si homocondensation. For the STA system, a gradual decrease of the Si-O-Ti/Si-O-Si band ratio (based on IR spectra) with the addition of Al₂O₃ is observed, with the simultaneous formation of Si-O-Al and Ti-O-Al bounds, i.e Al₃ ⁺ ions are dissolved in the SiO₂-TiO₂ glass matrix and do not promote glass-in-glass phase-separation in the composition range of 0–15 mol% AlO_1.5. In the STP system, on the other hand, P=O bond IR stretch in the ternary glasses indicates that P=O free PO₂O_2/2 ⁻ tetrahedra are formed, rather than the double bonded POO_3/2 tetrahedra that usually occur in binary SiO₂-P₂O₅ glasses. It can be concluded that SiO₂-TiO₂-P₂O₅ glass separates into a SiO₂-rich phase and a TiO₂(P₂O₅)-rich phase. During heat-treatment in STA system only anatase precipitates, even at T ~ 1,000 °C, while in for STP, anatase (TiO₂) or (TiO)₂P₂O₇ (TOP) crystals precipitate at ~600 °C, depending on the P₂O₅ concentration. The major crystal phase, cristobalite, precipitated at ~1,000 °C and at ~1,200 °C, the P-containing phase melts.     

Investigations on the Thermal and Elastic Properties of ZnO-Incorporated Phosphate Glasses and Glass Ceramics

Abstract

Glasses of the 45P₂O₅-(40-x)CaO-15Na₂O-xZnO system with increasing zinc oxide (ZnO) concentrations within the ranges of 3 ≤ x ≤ 12 mol% were obtained by employing the melt-quench technique. ZnO inclusions in the phosphate glass network lead to increases in its density and, conversely, a decrease in its molar volume. On the basis of the obtained thermal analysis data, the glasses underwent thermal treatment, which helped to derive their glass ceramic equivalents. The evaluations of structural and elastic properties of glasses before and after thermal treatments were made using X-ray diffraction (XRD) studies and ultrasonic nondestructive testing. The differential thermal analysis data show the reduction in the crystallization tendency and increase in thermal properties, such as crystallization temperature (T _P), thermal stability

(T _c – T _g) (where T_c is crystallization onset temperature and T _g is glass transition temperature), thermal stability parameter (S), and degree of glassification (D _g) of phosphate glasses against the progressive additions of ZnO. The XRD of glass ceramics confirmed the dominance of metaphosphate, pyrophosphate, and ZnO-related crystalline features. The measured elastic moduli, such as longitudinal (L), shear (G), Young's (Y), and bulk (K), and Vicker's microhardness values increased in both glass and glass ceramics with an increase in ZnO incorporation.     

Al,B, and F doped LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> as cathode material of lithium-ion batteries

A series of the mixed transition metal compounds, Li[(Ni_1/3Co_1/3Mn_1/3)_1–x-y Al _x B _y ]O_2-z F _z (x = 0, 0.02, y = 0, 0.02, z = 0, 0.02), were synthesized via coprecipitation followed by a high-temperature heat-treatment. XRD patterns revealed that this material has a typical α-NaFeO₂ type layered structure with R3^- m space group. Rietveld refinement explained that cation mixing within the Li(Ni_1/3Co_1/3Mn_1/3)O₂ could be absolutely diminished by Al-doping. Al, B and F doped compounds showed both improved physical and electrochemical properties, high tap-density, and delivered a reversible capacity of 190 mAh/g with excellent capacity retention even when the electrodes were cycled between 3.0 and 4.7 V.     

Specific heat on Sr<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and Sr<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Specific heats on the single crystals of Sr₂Nb₂O₇, Sr₂Ta₂O₇ and (Sr_1-xBa_x)₂Nb₂O₇ were measured in a wide temperature range of 2-600 K. Heat anomalies of a λ-type were observed at the incommensurate phase transition of T_INC (=495 K) on Sr₂Nb₂O₇ and at the super-lattice phase transition of T_SL (=443 K) on Sr₂Ta₂O₇; the transition enthalpies and the transition entropies were estimated. Furthermore, a small heat anomaly was observed at the low temperature ferroelectric phase transition of T_LOW (=95 K) on Sr₂Nb₂O₇. The transition temperature T_LOW decreases with increasing Ba content x and it vanishes for samples of x>2%.     

Thermal analysis study of Bi<Subscript>2</Subscript>Sr<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Cu<Subscript>3-x</Subscript>Er<Subscript>x</Subscript>O<Subscript>10+δ</Subscript> glass-ceramic system

Summary We have fabricated glasses in the Bi-2223 HT_c superconductor system with Bi₂Sr₂Ca₂Cu_3-xEr_xO_{10+ δ} nominal composition, where x=0.5 and 1.0, by the glass-ceramic technique. Using an analysis developed for non-isothermal crystallization studies, information on some aspects of crystallization temperature and thermal properties has been obtained. The crystallization studies were made using DTA with several uniform rates. The calculations of crystallization activation energies, E_a, and the Avrami parameters, n, were made based on the non-isothermal kinetic theory of Kissinger and the Ozawa’s equations. The DTA data of the samples showed that the first crystallization temperature, T_x1, increases and the second crystallization temperature, T_x2, decreases by increasing the Er concentration. This suggests that the Er substitution had significant effect on the glassification of the BSCCO material due to change on the surface nucleation and increased ionic activities at high temperature region. The activation energy for crystallization, E_a, of the samples was also showed an increase at high Er concentration case. However, the Avrami parameter, n, decreased from 2.5 to 1.7 for x=0.5 and 1.0 samples, respectively. This suggests that the growth mechanism is diffusion-controlled and three-dimensional parabolic growth takes place near the first crystallization temperature. The oxidization rates and the activation barrier for oxygen out-diffusion process, E, was calculated using the TG data. It was found that the total mass gain in the x=0.5 sample is comparably smaller than that of the x=1.0 sample. This shows that the oxygen absorption of the x=1.0 sample is faster than the x=0.5 sample, leading to increase in the oxidization rate in the x=1.0 material.     

Effect of LaF<Subscript>3</Subscript> admixture on thermal stability of borosilicate glasses

Oxyfluoride glass-ceramics based on the aluminosilicate glass-matrix with the nano-phase of fluoride is an interesting material for optoelectronics. A new glass from the SiO₂–B₂O₃–Na₂O–LaF₃ system in which nanocrystallization of LaF₃ could be obtained as well is presented. Thermal stability of glass and the crystalline phases formed upon heat treatment were determined by DTA/DSC and XRD methods, respectively. The effect of the glass composition on thermal stability was investigated by the SEM method. It has been found that the addition of LaF₃ increases the tendency to decomposition of the borosilicate glass. In glasses with the ratio B₂O₃/(Na₂O+3La₂F₆)<1 it is possible to obtain the immersed crystallization of LaF₃ in transparent glassy matrix. The process is preceded by LaOF formation. Glasses with the composition B₂O₃/(Na₂O+3La₂F₆)≥1 revealed the tendency to La(BSiO₅) crystallization.     

Influence of B<Subscript>2</Subscript>O<Subscript>3</Subscript> on the structure and crystallization of soil active glasses

Glasses of the SiO₂–P₂O₅–K₂O–MgO–CaO–B₂O₃ system acting as nutrients carriers in the soil environment were synthesised by the melt-quenching technique. Thermal properties were studied using DTA/DSC methods and the influence of B₂O₃ and P₂O₅ content on thermal stability and crystallization process of these glasses was examined. The structure of the glass network was characterized by FTIR, ³¹P, and ¹¹B MAS NMR. The chemical activity of the glasses in the 2 mass% citric acid solution was measured by the ICP-AES method. The analysis indicated that the formation of P–O–B units with chemically stable tetrahedral borate groups decreases the glass solubility in conditions simulating the soil environment.     

Viscosity and shrinkage of porous and quartzoid glasses of the Na<Subscript>2</Subscript>O-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

Shrinkage of porous glasses on heating from 20 to 800°C was studied and temperature dependences of the viscosity in the range of 10¹¹–10¹³ P were determined for quartzoid (sintered) glasses based on five glasses with different compositions in the Na₂O-B₂O₃-SiO₂ system. The shrinkage of porous glasses and the viscosity of quartzoid glasses were analyzed in relation to their composition and temperature of preliminary thermal treatment.     

NaBO<Subscript>2</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Na<Subscript>2</Subscript>WO<Subscript>4</Subscript> quaternary system

This is the first study of the NaBO₂-Na₂CO₃-Na₂MoO₄-Na₂WO₄ quaternary system by differential thermal analysis. Na₂[MoO_4(x)WO_{4(1 − x)}] solid solutions in the quaternary system are found to not decompose.     

Hydrothermal synthesis of one-dimensional (1D) Na<Subscript>x</Subscript>TiO<Subscript>2</Subscript> nanostructures

Nanorods of sodium titanium dioxide bronze Na_xTiO₂ were synthesized by the hydrothermal treatment of the amorphous TiO₂·nH₂O gel with 10 M NaOH followed by ultrasonication in 0.1 M HCl and thermal treatment (500°C, 10 h). The thermal treatment of the nanorods does not change the morphology of the particles. According to the electron diffraction data, the Na_xTiO₂ nanorods grow along the c axis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–73, January, 2005.     

Glasses in the CuNbOF<Subscript>5</Subscript>-BaF<Subscript>2</Subscript> and CuNbOF<Subscript>5</Subscript>-PbF<Subscript>2</Subscript> systems

Nonhygroscopic, colored glasses have been synthesized in the CuNbOF₅-BaF₂ and CuNbOF₅-PbF₂ systems proceeding from crystals of the complex compound CuNbOF₅ · 4H₂O. The glasses have been studied structurally and thermally. The crystallization resistance of the glasses has been studied as a function of glass composition. Lead difluoride glasses are more stable than barium difluoride glasses of the same composition. These glasses have lower glass-transition temperatures than the binary glasses formed in the NbO₂F-BaF₂ system. The glass structure is built of Nb(O,F)₆ polyhedra, which are linked in glass networks through oxygen bridges. Modifier cations influence both the structure of glass networks and the linkage of polyhedra.     

Effect of TiO2 and SrO additions on some physical properties of 33Na2O–xSrO–xTiO2–(50 − 2x)B2O3–17P2O5 glasses

By means of the conventional quenching route, the glass series 33Na₂O–xSrO–xTiO₂–(50 ? 2x)B₂O₃–17P₂O₅ (x = 0–12.5 mol%) were prepared. The amorphous state of samples was verified by X-ray diffraction (XRD). Density, molar volume, micro-hardness, glass transition temperature (T _g), and crystallization temperature (T _c) parameters are determined for each glass. The results show that they depend strongly on the chemical compositions. The structure approach of the glasses is determined by Infrared spectroscopy (IR). This investigation highlights that the glassy-matrix contains various phosphate and borate structural units. The crystallization of the high-TiO₂ glasses by heat-treatments favors the formation of titanate phosphate Na₄TiO(PO₄)₂ or Sr_0.5Ti₂(PO₄)₃ along with Sr₃(PO₄)₂ inside the glass-matrix.