3-氯-2-羟基丙磺酸钠的合成工艺研究

以环氧氯丙烷（1）和NaHSO₃为原料,Na₂SO₃为引发剂,乙二胺四乙酸二钠（EDTA₂Na）为络合增效剂,经酸催化开环反应合成了磺酸型两性表面活性剂中间体--3-氯-2-羟基丙磺酸钠（2）,其结构经¹H NMR, IR和ESI-MS确证。在最佳反应条件［1 0.55 mol, n(NaHSO₃）: n（Na₂SO₃）: n（EDTA₂Na）: n（H₂O)=1.00 : 0.04 : 0.01 : 9.50, 1的滴加时间15 min,在适宜的转速（前期100 rpm, 后期300 rpm）下,于70 ℃(浴温)反应1.25 h］下合成的2,收率81.55%。并对反应机理进行了推测。     

大量制备4-苄氧基-2-羟基苯甲醛的新方法

以间苯二酚为原料,采用酚羟基的苄基保护、Vilsmeier反应及选择性去保护三步反应的新方法合成了4-苄氧基-2-羟基苯甲醛,总产率52%,其结构经1H NMR和13C NMR确认。     

(2-羟基-3-丁氧基)丙基-羧甲基壳聚糖的合成及表面性质

(2-羟基-3-丁氧基)丙基-羧甲基壳聚糖的合成及表面性质;壳聚糖衍生物; (羟基丁氧基)丙基-羧甲基壳聚糖;表面活性;表面压     

4-对羟基苯基-2-丁酮的合成

以生物质来源的对甲氧基苯甲醛(大茴香醛)为原料,经还原反应制备得到对甲氧基苄醇,经氯代反应制备得到对甲氧基氯苄,再与乙酰乙酸乙酯经取代反应制备得到2-乙酰基-3-(4-甲氧基苯基)丙酸乙酯,再经串联的水解、脱羧反应制备得到4-(4-甲氧基苯基)-2-丁酮,最后经脱甲基反应制备得到4-对羟基苯基-2-丁酮,总收率为60.7%。具有路线简捷、易于操作、环境友好、收率高等优点。     

4-(2-苄氧基乙氧基羰基)氧杂环丁-2-酮的合成及表征

通过16例人肺鳞癌和小细胞肺癌组织中表达蛋白的二维电泳分离和质谱分析,经数据库检索鉴定了53个蛋白,其中24个蛋白与肺癌发病机制相关,4个蛋白在其它癌症中有报道,表达呈现差异的蛋白点有44个,其中34个在表达量上有差异,lO个蛋白在鳞癌和小细胞癌间表现为有和无的关系,蛋白功能分析提示人肺鳞癌与小细胞癌的蛋白质组表达存在差异,分析这些差异蛋白有利于肺癌分型及其生物标志物研究。     

用Heck反应合成1-羟基-4-(3-吡啶基)丁-2-酮

在Heck反应条件下,以Ph3P为催化剂配体,由3-卤代吡啶和3-丁烯-1,2-二醇进行偶合可以得到1-羟基-4-(3-吡啶基)丁-2-酮,具有原料易得、合成方法简单的优点.     

N-正辛基硼酸二乙醇胺酯催化合成2-羟基-4-正辛氧基二苯甲酮

N-正辛基硼酸二乙醇胺酯催化合成2-羟基-4-正辛氧基二苯甲酮;硼酸酯; 合成; 羟基正辛氧基二苯甲酮     

5-丁氧基亚甲基-2-降冰片烯的合成及其加成聚合反应

采用降冰片烯-5-甲醇和溴丁烷在氢化钠作用下合成了5-丁氧基亚甲基-2-降冰片烯,双-(β-酮萘胺)镍(Ⅱ)/B(C6F5)3催化体系使之聚合。 考察了聚合时间对其均聚合的影响以及5-丁氧基亚甲基-2-降冰片烯和降冰片烯不同摩尔投料比对其共聚行为的影响。 采用1H NMR、FTIR和TGA测试技术对所得的聚合物进行了结构表征和性能测试。 结果表明,双-(β-酮萘胺)镍(Ⅱ)/B(C6F5)3催化体系对5-丁氧基亚甲基-2-降冰片烯均聚和共聚具有较高的催化活性。 得到的均聚物和共聚物为加成型聚合物,料液中5-丁氧基亚甲基-2-降冰片烯的摩尔分数为10%~90%时,其在共聚物中的插入率为22.1%~76.9%,所得聚合物具有较好的热稳定性（Td＞360 ℃）,在THF和CHCl3等许多普通溶剂中有很好的溶解性能。     

(2-羟基-3-丁氧基)丙基-羟丙基壳聚糖的应用性质

表面活性;泡沫性;乳化性;吸湿保湿性;(2-羟基-3-丁氧基)丙基-羟丙基壳聚糖的应用性质     

Kinetics and mechanism of the grafting of 2-(dimethylamino)ethyl methacrylate onto hydrocarbon substrates

The kinetics of grafting a basic monomer, 2-(dimethylamino)-ethyl methacrylate (DMAEMA) to hydrocarbon substrates have been investigated. These systems were chosen as models for the grafting of a homopolymerizable monomer to polyolefins such as polyethylene. The reactions with squalane and n-eicosane were initiated by an organic peroxide, 2,5-dimethyl 2,5 dit-butylperoxy)-3-hexyne; grafting yields become significant at high reaction temperatures and low monomer concentrations. In squalane, the order of reaction with respect to monomer increased from about 1.1 for 0.22?0.44M DMAEMA to almost 2 at 0.69M DMAEMA; the order with respect to initiator was 0.56. The overall activation energy in the 130?160°C temperature range was, however, surprisingly low, 42±5 kJ mol^?1. When analytical data were used to separate the overall rate into those for grafting and homopolymerization, different kinetic paths were observed for the competing reactions. These results are interpreted in terms of two different mechanisms; intramolecular chain transfer plays an important role in grafting, while depropagation becomes a major factor in homopolymerization at temperatures above 150°C. © 1995 John Wiley & Sons, Inc.     

Effect of reaction conditions on the grafting of 2-(dimethylamino)ethyl methacrylate onto hydrocarbon substrates

The grafting of 2-(dimethylamino)ethyl methacrylate (DMAEMA) onto two model hydrocarbons, squalane and n-eicosane, and to linear low density polyethylene (LLDPE) has been investigated. The results of the study indicate that a high reaction temperature, 160°C, and a low concentration of monomer, less than 0.3 M, are optimum conditions for the grafting reaction. Reaction products, which consisted of grafted hydrocarbons and poly(DMAEMA), were separated by solvent extraction and vacuum distillation; samples were then analyzed by NMR and FTIR spectroscopy and size exclusion chromatography. ¹H-NMR spectroscopy indicates that grafted squalane contained approximately 6 DMAEMA units per squalane residue. ¹H- and ¹³C-NMR and molecular weight studies strongly suggest that the grafts onto the model hydrocarbons consist of single DMAEMA units. Results of the melt grafting of DMAEMA onto LLDPE show that the grafting efficiency and degree of grafting are substantially lower than were expected from the model system. © 1994 John Wiley & Sons, Inc.     

Novel emulsion graft copolymerization onto the silylmethyl group of poly(dimethylsiloxane)

The influence of radical initiators upon the emulsion graft copolymerization of styrene and acrylonitrile onto poly(dimethylsiloxane) (PDMS) was studied. As initiators, a series of peroxides and hydroperoxides were coupled with ferrous sulfate, among which the tert-butyl peroxylaurate system gave the highest grafting efficiency (30%). The tert-butyl peroxylaurate initiator fulfills the criteria for efficient radical grafting by generating only the tert-butoxy radical, which is reluctant to form a carbon radical via β-scission, being highly hydrophobic, and not carrying a tertiary hydrogen that may be abstracted by a radical. ¹³C-NMR analysis of the products showed that the grafting occurred on the silylmethyl groups of PDMS to give 10–25 grafts per polymer and graft ratio in the range 44–140%. The PDMS graft copolymers thus obtained could be used as surface-modifying agents to improve the lubricity and water-repellency of ABS [poly(styrene-co-acrylonitrile)-graft-polybutadiene]. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2607–2617, 1997     

Identity double-proton transfer in (3Z)-3-hydroxy-1,4-di(quinolin-2-yl)but-3-en-2-one

Although there is a very fast (on the NMR timescale) double-proton transfer in (1Z,3Z)-3-hydroxy-4-quinolin-2-yl-1-quinolin-2(1H)-ylidenbut-3-en-2-one (the product of the condensation of ethyl oxalate with 2lithiomethylquinoline), it is the only species present in chloroform solution. Comparison of the product of condensation of ethyl oxalate with 2lithiomethyl derivatives of pyridine (recent studies) and quinoline (present studies) shows that benzoannulation considerably affects the tautomeric equilibrium. The observed changes are not only quantitative but also qualitative. Moreover, contrary to the proton transfer in the pyridine tautomers, this process is fast in the quinoline tautomers. Comparison of the experimental and ab initio/DFT GIAO-calculated (13)C and (15)N chemical shifts for the transition states in the proton-transfer reactions between (1Z,3Z)- 3-hydroxy-4-quinolin-2-yl-1-quinolin-2(1H)-ylidenbut-3-en-2-one and its tautomers support the theory that a concerted identity reaction takes place between the enolimine-enaminone and enaminone-enolimine tautomeric forms. As a consequence, the most stable tautomeric form, (1Z,3Z)-1,4-di(quinolin-2-yl)buta-1,3-diene-2,3-diol, is not present in the tautomeric mixture.     

Characterization of poly(vinyl alcohol) during the emulsion polymerization of vinyl acetate using poly(vinyl alcohol) as emulsifier

During the emulsion polymerization of vinyl acetate (VAc) using poly(vinyl alcohol) (PVA) as stabilizer and potassium persulfate as initiator, the VAc reacts with PVA forming PVA-graft-PVAc. When the grafted polymer reaches a critical size it becomes water-insoluble and precipitates from the aqueous phase contributing to the formation of polymer particles. Since particle formation and therefore the properties of the final latex will depend on the degree of grafting, it is important to quantify and to characterize the grafted PVA. In this work, the quantitative separation and characterization of the grafted water-insoluble PVA was carried out by a two-step selective solubilization of the PVAc latex, first with acetonitrile to separate PVAc homopolymer, followed by water to separate the water-soluble PVA from the remaining acetonitrile-insoluble material. After the separation, the water-soluble and water-insoluble PVA were characterized by Fourier Transform Infrared (FTIR) spectroscopy and ¹H and ¹³C nuclear magnetic resonance (NMR) analyses, from which the details of the PVA-graft-PVAc structure were obtained. © 1996 John Wiley & Sons, Inc.     

Facile,catalyst-free,microwave-assisted access toward the synthesis of 2-aryl/alkyl-3-(1H-benzo[d]imidazol-2-yl)-2, 3-dihydroquinazolin-4(1H)-ones

An efficient, catalyst-free, microwave-assisted approach has been developed for the synthesis of 2-aryl/alkyl-3-(1H-benzo[d]imidazol-2-yl)-2,3-dihydroquinazolin-4(1H)-one derivatives by condensing 2-aminobenzamides with various aliphatic, aromatic, and heterocyclic aldehydes. This catalyst-free approach exhibited good functional group compatibility and produced the desired products in good to excellent yields in just 10–20?min. This approach can be seen as a better alternative of the metal-catalyzed protocols used for the synthesis of this class of compounds. The formation of desired compound has also been confirmed by X-ray analysis.     

Synthesis of obtusinin and 7-(3′-hydroxymethylbut-2′-enyloxy)-6-methoxy-2H-1-benzopyran-2-one

Obtusinin (1) has been synthesised by the reaction of 6-methoxy-7-(3-methylbut-2-enyloxy)-2H-1-benzopyran-2-one (3) with OsO₄. Synthesis of 7-(3-hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-one (2) has been achieved by the regiospecific oxidation of3 with SeO₂ followed by reduction of the formed aldehyde with KBH₄.

---

Synthese von Obtusinin und 7-(3-Hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-on

Zusammenfassung Obtusinin (1) wurde über 6-Methoxy-7-(3-methylbut-2-enyloxy)-2H-1-benzopyran-2-on (3) mit OsO₄ synthetisiert. Die Darstellung von 7-(3-Hydroxymethylbut-2-enyloxy)-6-methoxy-2H-1-benzopyran-2-on (2) wurde mittels regioselektiver Oxidation von3 mit SeO₂, gefolgt von Reduktion des gebildeten Aldehyds mit KBH₄, bewerkstelligt.

     

The effect of polyvinyl alcohol (PVA) on the optical,electrical and solid state properties of copper zinc tin sulfide (CZTS) deposited by sensitive spray pyrolysis (SSP)

Recently, the use of CZTS as the basis for other generation of low cost thin films solar cells has stimulated further researches. Its excellent p-type absorber nature, relatively high absorption coefficient and ideal energy band-gap of 1.5eV motivated these efforts. Additionally, CZTS consist of earth-abundant, cheap and non-toxic elements with very low manufacturing cost. Initially, copper indium gallium selenide (CIGS) solar cell device emerged but suffered limitations in further development because of rare indium and gallium in the device structure therefore, CZTS is recently preferred as an alternative to CIGS commercial solar cell absorber layer. In this work, solution mixture of CZTS and PVA was deposited on a substrate at temperature of 150 °C. Sensitive spray pyrolysis was used to grow the thin films where calculated amount of the precursor mixture was allowed to fall and be deposited on a heated substrate to form CZTS/PVA thin films. Subsequently, the thin film samples were annealed at a temperature of 200^oCfor 1 h to achieving pure crystalline thin film formation. SEM, XRD analysis, Optical, Solid State properties and Raman analysis were studied. The XRD analysis showed that the thin films fell into the pure kesterite structure of CZTS. Results show that produced thin films exhibited higher absorption coefficient and optical conductivity than pure CZTS, 10⁶ m^?1 and 10¹⁴(S^?1) against 10⁴cm^?1 and 10¹²(S^?1) respectively. The band-gap is between 1.53eV and 1.73eV. Using a PVA concentration of 0.05 M yielded highest absorbance and optical conductivity with lowest real dielectric constant and transmittance. These improved optical, electrical and solid state properties suitably qualify these thin films as absorber layer material for solar cell applications.     

Effects of α-zirconium phosphate aspect ratio on the properties of polyvinyl alcohol nanocomposites

To study the effect of the aspect ratio (ratio of platelet length to thickness) of α-zirconium phosphate (α-ZrP) on the mechanical and thermal properties of polymer nanocomposites, polyvinyl alcohol (PVA)/α-zirconium phosphate (α-ZrP) nanocomposites with three distinctive aspect ratios at ca. 300, 590 and 1300 were prepared and characterized. Wide-angle X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical (DMA) and tensile testing were utilized to characterise the film properties. As expected, it was found that the storage modulus, tensile strength (σ_b), elongation at break (_b) and decomposition temperature increased as the α-ZrP aspect ratio increased from 300 to 590. However, when the aspect ratio reached 1300, the enormously enlarged specific surface area of α-ZrP resulted in strong aggregation of the nanolayers which resulted in severe deterioration of the film properties.