Initial growth of lutetium(III) bis-phthalocyanine on Ag(111) surface

The adsorption of lutetium(III) bis-phthalocyanine (LuPc(2)) on Ag(111) was investigated using scanning tunneling microscopy and spectroscopy (STM/STS). A comprehensive study was carried out toward understanding the driving mechanism responsible for the formation of the first and second monolayers (MLs). In both MLs, the adsorbed molecules are found to exhibit different in-plane orientations arranged according to a "chess-board" like pattern. Highly resolved STM images allowed an exact determination of the corresponding angle mismatch, which differs for the first and second MLs. The tunneling transport through individual molecules reveals a negative differential resistance (NDR) effect detectable within the current-voltage curves. The corresponding density of states (DOS) representation is consistent with a resonant tunneling mechanism sustained by the valence band (VB) states close to the Fermi energy (E(F)) recorded via highly resolved ultraviolet photoemission spectroscopy (UPS).     

Au掺杂对TiO_2薄膜表面态及电荷传输性能的影响

采用两步法合成了不同Au掺杂量的TiO_2薄膜材料,并通过循环伏安(CV)和电化学阻抗谱(EIS)探究了不同Au掺杂量TiO_2薄膜的表面态数量及其在禁带中的分布情况.借助强度调制光电流/电压谱(IMPS/IMVS)研究了薄膜内电子传输时间和寿命及界面电荷转移性能等.结果表明,适量Au(摩尔分数0.2%)的掺入可有效降低薄膜的表面态数量,优化表面态分布情况,提高电子在TiO_2/染料/电解质界面的电阻,从而改善电子的传输性能,提升太阳电池的光电转换效率.     

N掺杂TiO_2纳米粒子表面光生电荷特性与光催化活性

以尿素为氮源,采用水热法制备了不同N掺杂量的TiO2(N-TiO2)光催化剂.利用X射线衍射(XRD),紫外-可见漫反射光谱(UV-Vis DRS),X射线光电子能谱(XPS)及荧光(PL)光谱等技术对其进行了系统的表征.以罗丹明B(RhB)和甲基橙(MO)溶液的脱色降解为模型反应,分别考察了N-TiO2光催化剂在紫外和可见光区的光催化活性.利用表面光伏(SPV)和瞬态光伏(TPV)技术研究了N-TiO2纳米粒子表面光生电荷的产生和传输机制,并探讨了光生电荷与光催化活性之间的关系.结果显示,随着N含量的增大,TiO2表面光伏响应阈值红移,可见光部分光电压响应强度逐渐增强,瞬态光伏响应达到最大值的时间亦有着不同程度的延迟.这表明适量的N掺杂能够提高TiO2纳米粒子中光生载流子的分离效率,相应地延长载流子的传输时间,增加光生电荷的寿命,从而促进其光催化活性;而过量的N掺杂则增加了TiO2纳米粒子中光生载流子的复合中心,抑制其光催化活性.     

Atomic structure of highly ordered pyrolytic graphite doped with boron

Boron-doped carbon was prepared by the high-temperature reaction of B₂O₃ with the highly ordered pyrolytic graphite (HOPG). In order to reveal the effect of the boron doping on the HOPG structure, several experimental tools were employed such as X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning tunneling microscopy (STM), and atomic force microscopy (AFM). While the interlayer spacing of the graphite plane remains virtually unchanged, the boron doping makes the graphite plane of HOPG more disordered. Both the STM and the AFM studies show that the boron-doped HOPG surface is deformed not only in its bonding geometry, but also in its electronic structure. The overall results imply that the boron atom is substituted for the carbon atom rather than is intercalated into the graphite layers.     

Application of Scanning Tunneling Microscopy and Spectroscopy in the Studies of Colloidal Quantum Qots

Colloidal quantum dots display remarkable optical and electrical characteristics with the potential for extensive applications in contemporary nanotechnology. As an ideal instrument for examining surface topography and local density of states (LDOS) at an atomic scale, scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) has become indispensable approaches to gain better understanding of their physical properties. This article presents a comprehensive review of the research advancements in measuring the electronic orbits and corresponding energy levels of colloidal quantum dots in various systems using STM and STS. The first three sections introduce the basic principles of colloidal quantum dots synthesis and the fundamental methodology of STM research on quantum dots. The fourth section explores the latest progress in the application of STM for colloidal quantum dot studies. Finally, a summary and prospective is presented.     

Electric field effect on the vibration of single CO molecules in a scanning tunneling microscope junction

A low-temperature scanning tunneling microscope (STM) and ab initio calculations were used to study the electric field effect on the vibration of single CO molecules in an STM junction at 13 K. The vibrational energy of CO molecules adsorbed on silver atoms, measured by STM-based inelastic electron tunneling spectroscopy, depends on the direction of the electric field applied between the STM tip and the silver species. This characteristic can be explained by the charge separation model. The electric field modifies the binding characteristics of CO on silver as a result of a change in the charged states of the species, which leads to an increase (or a decrease) of the energies of the hindered rotation and the CO stretch on silver.     

Adsorption-site-dependent electronic structure of catechol on the anatase TiO2(101) surface

The adsorption of catechol (1,2-benzendiol) on the anatase TiO(2)(101) surface was studied with synchrotron-based ultraviolet photoemission spectroscopy (UPS), X-ray photoemission spectroscopy (XPS), and scanning tunneling microscopy (STM). Catechol adsorbs with a unity sticking coefficient and the phenyl ring intact. STM reveals preferred nucleation at step edges and subsurface point defects, followed by 1D growth and the formation of a 2 × 1 superstructure at full coverage. A gap state of ～1 eV above the valence band maximum is observed for dosages in excess of ～0.4 Langmuir, but such a state is absent for lower coverages. The formation of the band gap states thus correlates with the adsorption at regular lattice sites and the onset of self-assembled superstructures.     

石墨烷纳米条带阵列中的近自由电子态

Nearly free electron (NFE) state has been widely studied in low dimensional systems. Based on first-principles calculations, we identify two types of NFE states in graphane nanoribbon superlattice, similar to those of graphene nanoribbons and boron nitride nanoribbons. Effect of electron doping on the NFE states in graphane nanoribbon superlattice has been studied, and it is possible to open a vacuum transport channel via electron doping.     

Gradient doping of conducting polymer films by means of bipolar electrochemistry

In this paper, we report a novel electrochemical doping method for conducting polymer films based on bipolar electrochemistry. The electrochemical doping of conducting polymers such as poly(3-methylthiophene) (PMT), poly(3,4-ethylenedioxythiophene) (PEDOT), and poly(aniline) (PANI) on a bipolar electrode having a potential gradient on its surface successfully created gradually doped materials. In the case of PEDOT film, the color change at the anodic side was also observed to be gradually transparent. PANI film treated by the bipolar doping gave a multicolored gradation across the film. The results of UV-vis and energy dispersive X-ray analyses for the doped films supported the distribution of dopants in the polymer films reflecting the potential gradient on the bipolar electrode. Furthermore, the reversibility of the bipolar doping of the PMT film was demonstrated by a spectroelectrochemical investigation.     

Electronic structures of one-dimensional metal-molecule hybrid chains studied using scanning tunneling microscopy and density functional theory

The electronic structures of self-assembled hybrid chains comprising Ag atoms and organic molecules were studied using scanning tunneling microscopy (STM) and spectroscopy (STS) in parallel with density functional theory (DFT). Hybrid chains were prepared by catalytic breaking of Br-C bonds in 4,4″-dibromo-p-terphenyl molecules, followed by spontaneous formation of Ag-C bonds on Ag(111). An atomic model was proposed for the observed hybrid chain structures. Four electronic states were resolved using STS measurements, and strong energy dependence was observed in STM images. These results were explained using first-principles calculations based on DFT.     

Three‐State Single‐Molecule Naphthalenediimide Switch: Integration of a Pendant Redox Unit for Conductance Tuning

We studied charge transport through core‐substituted naphthalenediimide (NDI) single‐molecule junctions using the electrochemical STM‐based break‐junction technique in combination with DFT calculations. Conductance switching among three well‐defined states was demonstrated by electrochemically controlling the redox state of the pendent diimide unit of the molecule in an ionic liquid. The electrical conductances of the dianion and neutral states differ by more than one order of magnitude. The potential‐dependence of the charge‐transport characteristics of the NDI molecules was confirmed by DFT calculations, which account for electrochemical double‐layer effects on the conductance of the NDI junctions. This study suggests that integration of a pendant redox unit with strong coupling to a molecular backbone enables the tuning of charge transport through single‐molecule devices by controlling their redox states.     

Fermi level engineering of single-walled carbon nanotubes by AuCl3 doping

We investigated the modulation of optical properties of single-walled carbon nanotubes (SWCNTs) by AuCl 3 doping. The van Hove singularity transitions (E 11 (S), E 22 (S), E 11 (M)) in absorption spectroscopy disappeared gradually with an increasing doping concentration and a new peak appeared at a high doping concentration. The work function was downshifted up to 0.42 eV by a strong charge transfer from the SWCNTs to AuCl 3 by a high level of p-doping. We propose that this large work function shift forces the Fermi level of the SWCNTs to be located deep in the valence band, i.e., highly degenerate, creating empty van Hove singularity states, and hence the work function shift invokes a new asymmetric transition in the absorption spectroscopy from a deeper level to newly generated empty states.     

Electrochemistry of Os(2,2'-bpy)2ClPyCH2NHCOPh tethered to Au electrodes by S-Au and C-Au junctions

Osmium pyridine-bipyridine redox centers have been tethered to Au electrodes by chemical modification through Au-S and Au-C bonds respectively. 4-Mercapto benzoic acid and the reduction product of the aryl diazonium salt of 4-amino benzoic acid were reacted on Au surfaces, with further post-functionalization by chemical reaction of the osmium complex amino-pyridine derivative with the surface carboxylates. The resulting modified Au surfaces were characterized by polarization modulated infrared reflection absorption spectroscopy (PM-IRRAS), scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), resonant raman spectroscopy and cyclic voltammetry.     

A theoretical rationalization of a total inelastic electron tunneling spectrum: the comparative cases of formate and benzoate on Cu(111)

Inelastic electron tunneling spectroscopy (IETS) performed with the scanning tunneling microscope (STM) has been deemed as the ultimate tool for identifying chemicals at the atomic scale. However, direct IETS-based chemical analysis remains difficult due to the selection rules that await a definite understanding. We present IETS simulations of single formate and benzoate species adsorbed in the same upright bridge geometry on a (111)-cleaved Cu surface. In agreement with measurements on a related substrate, the simulated IET-spectra of formate/Cu(111) clearly resolve one intense C-H stretching mode whatever the tip position in the vicinity of the molecular fragment. At variance, benzoate/Cu(111) has no detectable IET signal. The dissimilar IETS responses of chemically related molecules--formate and benzoate adsorbates--permit us to unveil another factor that complements the selection rules, namely the degree of the vacuum extension of the tunneling active states perturbed by the vibrations. As a consequence, the lack of a topmost dangling bond orbital is entirely detrimental for STM-based inelastic spectroscopy but not for STM elastic imaging.     

Construction of Shallow Surface States through Light Ni Doping for High‐Efficiency Photocatalytic Hydrogen Production of CdS Nanocrystals

Ni‐doped CdS nanowires were synthesized by a simple one‐step method. X‐ray diffraction, X‐ray photoelectron spectroscopy, and photoluminescence spectroscopy confirmed that light Ni doping can form shallow surface states due to the presence of substitutional Ni ions, and heavy Ni doping can form deep surface states due to the presence of interstitial Ni ions. Surface photovoltage spectroscopy and transient photovoltage measurements revealed that the shallow surface states can prolong the lifetime of the photogenerated charge carriers, whereas the deep surface states lead to recombination of the photogenerated charge carriers. The relationship between different surface states and the photocatalytic performance of CdS nanocrystals are discussed. The enhanced density of shallow surface states due to light Ni doping significantly promotes photocatalytic H₂ production.     

Vibronic transitions in single metalloporphyrins.

Structural and electronic properties of single zinc etioporphyrin molecules adsorbed on Al2O3/NiAl(110) were probed by a low-temperature scanning tunneling microscope (STM). Scanning tunneling spectroscopy (STS) revealed progressions of spectral features corresponding to the vibronic states of individual molecules that depend strongly on the molecular conformations. Vibronic features observed by STS were compared with the results from fluorescence induced by tunneling electrons (tunneling-induced fluorescence, TIF).     

Chemical imaging of single 4,7,12,15-tetrakis[2.2]paracyclophane by spatially resolved vibrational spectroscopy

Single 4,7,12,15-tetrakis[2.2]paracyclophane were deposited on NiAl(110) surface at 11 K. Two adsorbed species with large and small conductivities were detected by the scanning tunneling microscope (STM). Their vibrational properties were investigated by inelastic electron tunneling spectroscopy (IETS) with the STM. Five vibrational modes were observed for the species with the larger conductivity. The spatially resolved vibrational images for the modes show striking differences, depending on the coupling of the vibrations localized on different functional groups within the molecule to the electronic states of the molecule. The vibrational modes are assigned on the basis of ab initio calculations. No IETS signal is resolved from the species with the small conductivity.     

Mechanism of electrochemical charge transport in individual transition metal complexes

We used electrochemical scanning tunneling microscopy (STM) and spectroscopy (STS) to elucidate the mechanism of electron transport through individual pyridyl-based Os complexes. Our tunneling data obtained by two-dimensional electrochemical STS and STM imaging lead us to the conclusion that electron transport occurs by thermally activated hopping. The conductance enhancement around the redox potential of the complex, which is reminiscent of switching and transistor characterics in electronics, is reflected both in the STM imaging contrast and directly in the tunneling current. The latter shows a biphasic distance dependence, in line with a two-step electron hopping process. Under conditions where the substrate/molecule electron transfer (ET) step is dominant in determining the overall tunneling current, we determined the conductance of an individual Os complex to be 9 nS (Vbias = 0.1 V). We use theoretical approaches to connect the single-molecule conductance with electrochemical kinetics data obtained from monolayer experiments. While the latter leave some controversy regarding the degree of electronic coupling, our results suggest that electron transport occurs in the adiabatic limit of strong electronic coupling. Remarkably, and in contrast to established ET theory, the redox-mediated tunneling current remains strongly distance dependent due to the electronic coupling, even in the adiabatic limit. We exploit this feature and apply it to electrochemical single-molecule conductance data. In this way, we attempt to paint a unified picture of electrochemical charge transport at the single-molecule and monolayer levels.     

Doping properties of polydithienylmethine: a study on the correlation between polymer chain length, spectroscopy, and transport

(1S)-(+)-10-Camphorsulfonic acid-doped polydithienylmethine was prepared through an acid-catalyzed condensation reaction of alpha,alpha'-di-2-thienyl-(2,2'-bithiophene)-5,5'-dimethanol and was characterized by 1H NMR spectroscopy and size exclusion chromatography (SEC). The electronic and vibrational properties of the resulting polymer thin films vary with the loadings of the (1S)-(+)-10-camphorsulfonic acid. The dark conductivity and drift mobility, which is significantly high, of the polymer thin films were enhanced with increasing doping levels and reached maximum values of 8.0x10(-5) S.cm-1 and 3.5x10(-2) cm2.V-1.s-1, respectively, at a 7 mol % dopant loading. Higher doping levels (>7 mol %) result in nonuniform polymer thin films with degraded optical quality due to the formation of nanocrystalite and thus a decrease in conductivity and drift mobility was observed. The doped polydithienylmethine thin film also exhibited a photoconductivity response with an excitation at 457 nm and the highest photoconductivity (2x10(-4) S.cm-1) was again observed at the 7 mol % doping level. Spectroscopic investigation suggests that the enhanced transport properties can be attributed to polaronic species present. The electronic and vibrational changes which relate to such doping were characterized by electronic absorption spectroscopy, Raman spectroscopy, and FTIR spectroscopy. The changes in transport values can be directly related to the changes we see in our spectroscopic investigations.     

Addressing metal centres in supramolecular assemblies

Supramolecular metal ion assemblies are deposited from their solutions onto highly orientated pyrolytic graphite (HOPG) substrates to be imaged by scanning tunnelling microscopy (STM). Since the structural and electronic information of STM measurements are strongly entangled, the spectroscopic interpretation and analysis of the images of such molecular assemblies has proven to be challenging. This tutorial review focuses on a general room temperature scanning tunnelling spectroscopy (STS) protocol, current induced tunnelling spectroscopy (CITS), applied to free-standing 1D and 2D arrangements of supramolecular metal ion assemblies rendering local tunnelling probabilities with submolecular resolution. The size of the investigated molecular assemblies was confirmed by comparison with X-ray crystallographic data, while the consistency of the spectroscopic investigations and of the determined positions of the metal ions within the assemblies was checked by DFT calculations. Due to the genuine level structure of coordinated metal centers, it was possible to map exclusively the position of the coordination bonds in supramolecular transition metal assemblies with submolecular spatial resolution using the CITS technique. CITS might thus constitute an important tool to achieve directed bottom-up construction and controlled manipulation of fully electronically functional, two-dimensional molecular designs.