Anomalous behavior revisited: Dynamic response of elastic-plastic structures

Based on the minimum principle of acceleration in the elastic-plastic continua under finite deformation, the dynamic response of an elastic-perfectly plastic pin-ended beam subjected to rectangular impulse loading is studied with the help of a numerical approach. The calculated results once again show the anomalous behavior of the beam during its response process, which was previously found in [1]. By carefully analyzing the instantaneous distribution of the bending moment, the membrane force, the curvature and displacement during the response process, it is concluded that the interactive effect between the geometry and materials nonlinearities of the structure is the key reason for leading to the anomalous behavior. This will be helpful for clarifying some misunderstandings in explaining the problem before. Project supported by the National Natural Science Foundation of China.     

基于余能原理的有限变形问题有限元列式

利用基面力概念,推导了一种基于余能原理的有限变形问题显式有限元列式,可应用于结构的大位移、大转动问题。以基面力为状态变量来表达单元的余能,将有限变形情况下的单元余能分解为变形余能部分和转动余能部分,利用Lagrange乘子法推导出余能原理有限元的控制方程,编制了相应的非线性有限元程序。通过算例分析,说明该列式和程序的可靠性和精确性。     

多孔Mooney-Rivlin材料矩形板的单向拉伸

本文利用不可压超弹性材料大变形的Mooney-Rivlin应变能函数研究了含有多个微孔的矩形板在单向拉伸作用下的有限变形和受力分析.首先利用不可压条件得到了文中所给的含有某种对称性分布的多个微孔的矩形板的变形模式函数,其中所含的一个参数可由远离微孔的无穷远处的变形状态确定,另一个参数可用最小势能原理导出变分近似解.文中详细分析了板中微孔(一个、三个和五个)随载荷作用的增长情况和微孔边缘应力的分布情况,并进行了比较.讨论了微孔的个数和排列方式、微孔的大小和孔间距离等因素对微孔增长和应力分布的影响.     

一个适用于非线性板壳问题的广义变分原理

本文在现时拉格朗日(UL)描述下推导了适用于有限变形及率敏感非弹性材料的广义变分原理。以位移率和应变率为独立变量使它较适于在非弹性材料的板壳问题中应用。并推导了两种率敏感塑性模型(Bodner和Perzyna)的统一的计算增量表达形式。     

任意挠曲输液管道瞬时变分原理

给出了弹性系统瞬时势能泛函的一般表达式，得到了其关于任意挠曲输液管道的具体表达式，根据瞬时最小势能原理建立了该结构的有限元动力方程，并首次推导出其离心力载荷公式，讨论了管道结构静平衡位置的发散流速的确定，最后，用简单的实验结果对理论分析作了验证。     

一种薄板弯曲问题的四边形位移单元

本文基于修正势能泛函,引入广义协调的概念,导出了一种具有12个自由度的薄板弯曲四边形位移单元LGC—Q12,这种单元协调性好,列式简单,计算精度高。并且能近似地通过分片检验。     

Role of underground structure deformation velocity in the analysis of blast-resistant structures

The structural deformation velocity plays a significant role in the dynamic calculation of underground blast-resistant structures. The motion differentiating equation of a structure system taking into account the role of deformation velocity of the structure will truthfully describe the actual situation of structural vibration. With the one-dimensional plane wave theory, the expression of load on the structural periphery is developed, and the generalized variation principle for the dynamic analysis of underground arched-bar structures is given. At the same time, the results of the numerical calculation are compared. Biography: ZHAO Xiao-bing (1975-)     

基面力元法(BFEM)的研究及应用进展

从高玉臣院士提出的基面力概念出发,针对一种基于基面力概念的新型有限元法—基面力元法BFEM(Base Force Element Method)的研究及应用进行综述.分析结果表明:基面力元法的计算所得结果与理论解吻合较好,基于余能原理的基面力元法较传统平面4节点等参元(Q4单元)具有较高的计算性能;在高度几何非线性分析中,基于余能原理的基面力元法较平面4节点减缩积分单元(Q4R单元)也具有一些优势;基面力元法列式推导简单,是有限元方法的一种新思路,具有较好的应用前景.     

THE GROWTH OF THE VOID IN A HYPERELASTIC RECTANOULAR PLATE UNDERA UNIAXIAL EXTENSION

1.IntroductionInrecenttenyears,thevoidformationandgrowthinhyperelasticmaterialhaveattractedmoreandmoreattentionandinterest.Theearliertestsfoundthatthenucleationofthemicro-voidwouldbepossibleduringthestretchingdeformationinmaterandrubbermaterials.However,t…     

Large deformation of incompressible rubber cylinder under plane strain

The large deformation of incompressible rubber cylinder under inner pressure is analyzed by a kind of new rubber materials strain energy function. The theory formulation for the displacement and stress is presented. The penalty finite element formulation is established in order to analyze nonlinear rubber materials, and the results of finite element method agree well with theoretical ones. A new method for controlling the calculating stability and convergence rates is put forward. The selection of the appropriate penalty factor and its influence on calculated results are discussed.     

平面应变不可压缩橡胶圆柱的大变形

针对一类新的橡胶材料应变能函数,推导了受内压作用下不可压缩橡胶圆柱的大变形公式,给出了位移、应力的解析表达式（用积分形式表示）。建立了适用于分析非线性不可压缩橡胶材料的罚有限元列式,算例表明：位移与应力能很好地与理论解吻合,并提出了控制计算稳定的方法,特别是详细地讨论罚因子的选取及对计算结果的影响。     

基于最小加速度原理的刚塑性动力问题

应用有限变形的最小加速度原理,推导出了小变形或有限变形构件受到刚性飞射物撞击时的刚塑性运动方程,指出该方法具有直接、简捷和可靠的特点。     

Nonlinear quasi-conforming finite element method

The nonlinear quasi-conforming FEM is presented based on the basic concept of the quasiconforming finite element. First, the incremental principle of stationary potential energy is discussed. Then, the formulation process of the nonlinear quasi-conforming FEM is given. Lastly, two computational examples of shells are given.     

广义协调扇形板弯曲单元

本文基于修正的势能泛函,引入适当的广义协调条件,导出了一种具有12个自由度的广义协调板弯曲扇形位移单元GC—S12,这种单元自由度少,列式简单,精度高。     

从受拉杆变形浅析弹性力学中的最小势能原理

最小势能原理是弹性力学中较难理解的知识点。本文通过对弹性杆轴向受拉时的弹性势能、外力势能和总势能的变分分析,得出总势能变分是位移变分或应变变分的二阶无穷小量,并在位移变分或应变变分为零时,总势能取得极小值。弹性杆轴向受力变形的分析应验了最小势能原理,有助于对一般情况下最小势能原理的深刻理解。