Polymorphism of phenylpyruvic acid studied by IR, Raman and solid state C NMR spectroscopy

Polymorphs I and II of phenylpyruvic acid are obtained as mixtures of both crystal forms or relatively pure crystals, from different solvents. Polymorph I is more stable than polymorph II at room temperature. Spectral characteristics of these polymorphs are discussed on the basis of IR, Raman and solid state ¹³C NMR spectra. Also, the assignment of the IR features observed in the 1600–1700 cm⁻¹ region is re-investigated by referring to the spectra of heavy-atom substituted derivatives. It is suggested that the C=O stretching band is split by the crystal field for both polymorphs.     

Molecular weight effect on the complexation of poly(methacrylic acid) and poly(ethylene oxide) as studied by high-resolution solid-state C NMR spectroscopy

Complexes of poly(methacrylic acid) (PMAA) and poly(ethylene oxide) (PEO) with different PEO molecular weight were studied by solid-state high-resolution ¹³C NMR spectroscopy, with the emphasis on the PEO molecular weight effect on inter-polymer interaction, morphology and molecular motion. It is found that the crystalline phase of PEO is completely destroyed in the complex. The results of ¹H transverse relaxation times and ¹³C spin-lattice relaxation times indicate that the chain mobility of both PEO and PMAA are greatly restricted by inter-molecular hydrogen-bonding interactions, especially when the molecular weight of PEO is 1500. The bulk structures of the complexes are found to be closely dependent on the molecular weight of PEO. The fraction of “free” PEO segments without forming hydrogen-bonds with PMAA increases with increasing PEO molecular weight.     

Structural and dynamical studies of poly(vinyl alcohol) gels by high-resolution solid-state C NMR spectroscopy

The ¹³C CP/MAS NMR spectra of isotactic, syndiotactic and atactic poly(vinyl alcohol) (PVA) gels were measured in order to clarify the structure of the immobile component of PVA gel. In the ¹³C CP/MAS NMR spectra, the three CH carbon peaks I, II and III (at about 77, 71 and 65 ppm) were clearly observed, which originate from the formation of strong intermolecular or intramolecular hydrogen bonds between hydroxyl groups like solid PVA. It has been assigned that these peaks originate from the crosslinked region in the gel state. On the basis of the experimental results, intermolecular hydrogen bonds play an important role in the formation of the crosslinked-region in the gel state. Further, the effect of PVA's tacticity on the amount of the crosslinked regions by intermolecular interactions was discussed. In addition, molecular motion in the immobile and mobile region of PVA gel was discussed through the observation of ¹³C spin-lattice relaxation time T₁.     

Microstructural study of poly(methyl methacrylate-co-n-propyl acrylate) by 13C NMR

Analysis of carbonyl and β-CH₂ signals in the 100?MHz ¹³C NMR spectra of poly(methyl methacrylate-co-n-propyl acrylate) (PMMA/nPrA), provided distribution of configurational-compositional sequences for a series of the copolymer samples of different composition at pentad level for carbonyl signal and hexad level for the backbone methylene carbons. Computer simulation of the spectra based on incremental calculation of the chemical shifts for individual sequences provided very good agreement with the experimental spectra.     

pH-induced structural changes of surface immobilized poly(L-lysine) by two-dimensional (2D) infrared correlation study

This paper reports the pH-induced structural changes in the surface immobilized poly(L-lysine)(PLL)film.Two-dimensional(2D) correlation analysis was applied to the Fourier transform infrared(FTIR)spectra of the surface-immobilized PLL film to examine the spectral changes induced by the alternations of the protonation state of the amino group in the side chain.Significant spectral changes in the FTIR spectra of the PLL film were observed between pH 7 and 8.The decrease in the protonation state of the amino group in the side chain induced spectral changes in the amino group as well as conformational changes in the alky]group in the side chain.From pH 1-8,the spectral changes in the amino and alkyl groups in the side chain occurred before those of the amide group in the main chain of the surface immobilized PLL film.     

A study of the conformational stability of poly(β-benzyl l-aspartate), poly(γ-benzyl l-glutamate) and poly(β-benzyl l-aspartate)/poly(γ-benzyl l-glutamate) blend in the solid state by variable-temperature C CP/MAS NMR

¹³C CP/MAS NMR experiments on polypeptides, poly(β-benzyl l-aspartate) (PBLA), poly(γ-benzyl l-glutamate) (PBLG) and PBLA/PBLG blend have been carried out, in order to elucidate the conformational stability of the polypeptides in the solid state over a wide range of temperatures and its blending effect. The PBLA/PBLG blend with a mixture ratio of 1/1 is prepared by adding trifluoroacetic acid (TFA) solution to alkaline water (TFA-alkaline treatment). From these experimental results, it is found that the conformation of PBLA in the PBLA/PBLG blend sample is changed from left-handed helix (α_L-helix and/or ω_L-helix) form to the α_R-helix form, and then the origin of the formation of the α_R-helix form in PBLA comes from the existence of PBLG. Further, from the variable-temperature ¹³C CP/MAS NMR experiments results, it is shown that the conformational behavior of PBLA in the PBLA/PBLG blend is similar to that of the TFA-alkaline treated PBLA, and also the conformational behavior of PBLG in the PBLA/PBLG blend is similar to that of the TFA-alkaline treated PBLG.     

Critical comments on accuracy of quantitative determination of natural humic matter by solid state (13)C NMR spectroscopy

Structural information of natural organic matter (NOM) at the molecular level is very essential in understanding their nature and reactivity. Nuclear magnetic resonance (NMR) is an excellent tool for estimating the gross chemical composition of the very complex humic matter (HM). A well-known fact is that the solid state ¹³C NMR spectral analysis is very parameter-sensitive especially in the study of the heterogenous HM (e.g. baseline corrections, different pulse techniques and spinning rates of the rotor vs. different disruptive sidebands in the spectra). This being the case, it has been emphasized the importance of qualitative and quantitative analyses for generating as real spectra as possible by means of different pulse and polarization techniques, sampling spinning rates as well as certain correction factors. In the present study a practical accuracy for quantitative determination of NOM type material by solid state ¹³C NMR spectroscopy was assessed using a known HM sample. Different magnetic-field strengths, sampling spinning rates, single and ramped amplitude cross polarization techniques and TOSS pulse sequence were applied for obtaining a more reliable insight into the disruptive effect of the chemical shift anisotropy (CSA), especially the most disturbing first order spinning side bands (SSB). The results demonstrated that the SSB problem is not so significant as sometimes stated, at least in the context of HM samples and in the light of the overall reproducibility and uncertainty connected with the sample itself.     

Microstructure of poly(methyl methacrylate-co-isopropyl acrylate) studied by 13C NMR

The distribution of configurational–compositional sequences of poly(methyl methacrylate-co-isopropyl acrylate) (PMMA/iPrA) has been determined from the carbonyl and β-CH₂ signals in the 100?MHz ¹³C NMR spectra of the copolymer. The carbonyl signal provided information on configurational–compositional sequences up to heptads, whereas β-CH₂ signals offered complementary information on even sequences up to hexads. The assignment of the sequences to the respective signals was based on a comparison with the spectra of respective homopolymers, that is, PMMA and PiPrA followed by a computer simulation applying an incremental calculation of chemical shifts of the individual sequences.     

Raman imaging analysis of pharmaceutical tablets by two-dimensional (2D) correlation spectroscopy

Chemical properties of active substances and insoluble excipient within tablets such as crystalline structures can be seen as an important index for solubility of ingredients. Spectroscopic imaging can potentially be a solid solution to understanding mechanisms at the molecular level and it may bring useful insight in terms of process analytical technique. In the present study, generalized two-dimensional (2D) correlation spectroscopy is utilized for the Raman image analysis of pharmaceutical tablets to reveal molecular interactions between chemical components. By using a spatial distance as a perturbation variable in 2D correlation scheme, synchronous and asynchronous correlation analysis becomes possible. Two kinds of pharmaceutical tablets, pentoxifylline (PTX) as an active substance and palmitic acid (PA) as an insoluble excipient, are prepared with different grinding times, 0.5 and 45 min. The 2D correlation analysis of Raman images of the tablets clearly reveals both physical and chemical effects of grinding process on the properties of the tablets. Asynchronous correlations indicate that a specific molecular structural change of PTX related to the crystallinity is induced by the grinding process. Namely, the crystallinity of PTX based on CH₂ structure is a key factor to control the solubility of the tablets. Some properties of pharmaceutical tablets, i.e. solubility or distribution of components in turn may become possible by the simple grinding process. Detailed analysis of Raman images becomes possible by the 2D correlation spectroscopy.     

Characterization of blends of poly(vinyl chloride) and poly(N‐vinyl pyrrolidone) by FTIR and 13C CP/MAS NMR spectroscopy

Blends of poly(vinyl chloride) (PVC) with Poly(N‐vinyl pyrrolidone) (PVP) were investigated by Fourier infrared spectroscopy (FTIR) and high‐resolution solid‐state ¹³C cross‐polarization/magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) spectroscopy. The intermolecular interactions between PVP and PVC are weaker than the self‐association of PVP and the inclusion of the miscible PVC results in the decreased self‐association of PVP chains, which was evidenced by the observation of high‐frequency shift of amide stretching vibration bands of PVP with inclusion of PVC. This result was further substantiated by the study of ¹³C CP/MAS spectra, in which the chemical shift of carbonyl resonance of PVP was observed to shift to a high field with inclusion of PVC, indicating that the magnetic shielding of the carbonyl carbon nucleus is increased. The proton spin‐lattice relaxation time in the laboratory frame (T₁ (H)) and the proton spin‐lattice relaxation time in the rotating frame (T_1ρ(H)) were measured as a function of the blend composition to give the information about phase structure. It is concluded that the PVC and PVP chains are intimately mixed on the scale of 20–30Å. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2412–2419, 1999     

1-Methyl-2(3,4)-(1-vinylpyrrol-2-yl)pyridinium iodides: some structural features revealed by 1H and 13C NMR spectroscopy

The reactions of 2-, 3-, and 4-(1-vinylpyrrol-2-yl)pyridines with methyl iodide afford the corresponding quaternary salts. Analysis of their ¹H and ¹³C NMR spectra showed that the quaternization of the nitrogen atom considerably enhances the -acceptor effect of the pyridine ring on the pyrrole ring and on the vinyl group. 1-Methyl-2-(1-vinylpyrrol-2-yl)pyridinium iodide contains no weak intramolecular C--H...N hydrogen bond present in the starting compound.     

Solid-state C NMR and SAXS characterization of the amorphous phase in low-molecular weight poly(ethylene oxide)s

Low-molecular weight poly(ethylene oxide)s (PEO) with extended, once or twice folded chains (as characterized by SAXS), were investigated by solid-state ¹³C NMR spectra measured under conditions to detect only the signal of the narrow line component. The direct detection and integrated intensities of the signals from hydroxy-terminated chain-end units in these spectra confirm that the narrow line component corresponds to the noncrystalline (amorphous) phase. The NMR line of PEO carbons adjacent to the hydroxy end-groups was used as an intensity standard to obtain information on the mean number of carbons per chain contributing to the amorphous phase. Assuming that amorphous phase is formed by chain ends (cilia) and folds it follows from the spectra that the length of folds is 6-7 monomer units; cilia are 2-3 monomer units long.     

Sequence Distribution of Poly(methyl acrylate) by Incremental Calculation

The carbonyl signal in the 100 MHz ¹³C NMR spectra of poly(methyl acrylate) (PMA) recorded in benzene-d₆ exhibits configurational sensitivity up to pentads, and the signal of backbone β-CH₂ carbons shows splitting up to configurational hexads with traces of octads. Assignment of the sequences to respective signals was confirmed by computer simulation of both carbonyl and methylene signals applying a method of incremental calculation of chemical shifts of individual sequences and second-order Markov statistics for sequence probabilities.     

Rheo-optical near-infrared (NIR) spectroscopy study of low-density polyethylene (LDPE) in conjunction with projection two-dimensional (2D) correlation analysis

A rheo-optical characterization technique based on near-infrared (NIR) spectroscopy is developed specifically to probe the submolecular-level deformation caused during a mechanical test. An illustrative example of the mechanical deformation of low-density polyethylene (LDPE) is provided to show how it can be utilized. A set of NIR spectra of the polymer sample were collected by using an acousto-optic tunable filter (AOTF) NIR spectrometer coupled with a tensile testing machine as an excitation device. While the substantial level of variation of spectral intensity was readily captured during the mechanical deformation of the LDPE, main feature of the NIR spectra was overwhelmed by the contribution from the baseline change. Projection 2D correlation analysis was then applied to selectively extract the signal contribution from the baseline fluctuation. The 2D correlation spectra revealed the predominant extension of amorphous tie chains followed by the rotation of crystalline lamellae, which induce elastic and plastic deformation of the LDPE, respectively.     

Characterization of n-butyl acrylate centered triads in poly(n-butyl acrylate-co-carbon monoxide-co-ethylene) by isotopic labeling and two dimensional NMR

Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. Electronic Supplementary Material: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.     

Alkyldiamine bis(selenocyanato)cadmium(II) complexes: Synthesis, Cd, Se, N and C NMR spectroscopy and X-ray structure of a 2D metal-organic framework

Complexes of cadmium(II)-selenocyanate with several alkyldiamine ligands have been synthesized and characterized by IR, ¹¹³Cd, ⁷⁷Se, ¹⁵N and ¹³C NMR spectroscopy. The X-ray structure of the complex [Cd(SeCN)₂-en] reveals two non-equivalent metal ion centers, both with a distorted octahedral geometry. The combined bridging modes of selenocyanate and ethylenediamine with the blocking mode of a chelating ethylenediamine generate a 2D metal-organic framework.     

Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

Thermochromism in nickel(II) complexes: thermal, solid state H NMR and single crystal X-ray analysis of bis-(N,N-dimethyl-1,2-ethanediamine) nickel(II) perchlorate

The complex bis-(N,N-dimethyl-1,2-ethanediamine) nickel(II) perchlorate undergoes a first-order thermochromic phase transition at ca. 476 K, changing its color from orange to red. The room temperature X-ray crystal structure determination showed that the nickel ion possesses a square-planar geometry with two five membered chelate rings, in the δλ conformation, forming the NiN₄ chromophore. The broad-line ¹H NMR indicates the onset of a dynamic disorder of diamine chelate rings at the phase transition temperature region, while T₁ measurement of ¹H affords the activation energy of the puckering metal chelate rings to be 26 kJ mol⁻¹. The electronic spectrum revealed that a weakening of ligand field around the nickel is associated with the phase transition.     

Elucidation of the structures of 3-alkylthio-, 3-benzylthio-, 2-arylthio- and 2-heteroarylthio-N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamines by one- and two-dimensional NMR spectroscopy

Nucleophilic addition of alkyl- and benzylthiols to benzoquinone diimine (1) gave the corresponding 3-alkylthio- or 3-benzylthio-1,4-phenylenediamines (2-5). However, addition of aryl- or heteroarylthiols to 1 formed 2-arylthio- or 2-heteroarylthio-1,4-phenylenediamines (6-14). The structures of 2-14, obtained in 55-91% yields, were confirmed in CDCl3 or DMSO-d6 solution using 1D (NOE difference, coupled 13C NMR spectra, APT and DEPT) and 2D NMR techniques [DQCOSY, NOESY, HETCOR and heteronuclear multiple bond coherence (HMBC)] that resulted in unambiguous proton and carbon NMR resonance assignments. The substituent-induced 13C NMR chemical shift differences were calculated in 2-14 relative to carbon atoms in the model compound N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamine (DMBPPD) (15) (a reduced form of benzoquinone diimine).     

Miscibility of poly(vinyl methyl ether) and poly(styrene-co-2-vinylnaphthalene) blends by FT-IR spectroscopy and Tg measurements

Miscibility of blends consisting of poly(vinyl methyl ether) (PVME) and poly(styreneco-2-vinylnaphthalene) [P(S-co-2VN)] was investigated by means of Fourier transform infrared (FT-IR) spectroscopy and thermal analysis. Copolymers containing 21, 51, and 84 wt % of styrene were synthesized by radical polymerization. Based on optical clarity and glass transition temperatures, it was shown that the miscibility in P(S-co-2VN)/PVME blends is largely affected by compositions of the copolymers as well as concentrations of the blend. From the FT-IR results, the relative intensity at 1100 cm^?1 peak of COCH₃ band of PVME and the position of naphthyl ring of 2VN were sensitive to the miscibility of the blends. It was observed that blends of PVME with P(S-co-2VN) of 84 wt % styrene or P(S-co-2VN) of 51 wt % styrene are miscible over the entire concentration ranges of the blends. Blends of PVME with P(S-co-2VN) containing 21 wt % of styrene are immiscible below 65 wt % PVME. In the miscible P(S-co-2VN)/PVME blends, there was observed a large shift in the naphthyl frequency at a characteristic wavelength of 748 cm^?1. © 1993 John Wiley & Sons, Inc.