Selective extraction of light lanthanides(III) with 18-crown-6 and perfluorooctanoate

The extraction of La(III), Gd(III), and Lu(III) with 18-crown-6 (18C6) has been studied using pentadecafluorooctanoate (PDFO) as a counter anion. Very high extractability of La(III) was observed in various organic solvents such as benzene, chloroform, 1,2-dichloroethane, and nitrobenzene. The predominant species extracted into benzene was found to be Ln(PDFO)₃ (18C6), and the extraction constants (K _ex,s1 =[Ln(PDFO)₃ (18C6)]_org/[Ln³⁺][PDFO]³[18C6]_org) were 10^13.12 for La(III), 10^9.74 for Gd(III), and 10^9.67 for Lu(III). These values are 10¹⁰ times higher than those in the trichloroacetate-18C6 system reported previously. The present PDFO-18C6 system was superior to the picrate- and hexafluoroacetylacetonate-18C6 system for the separation efficiency of light lanthanides(III).     

Solvent extraction of gallium(III) with 2-thenoyltrifluoroacetone

Gallium can be quantitatively extracted at trace levels with 2-thenoyltrifluoroacetone in xylene at pH 4.5-6.0. Gallium is determined in the organic phase photometrically by complexation with Rhodamine B. The system conforms to Beer's law (at 565 nm) in the concentration range 2-59 mug ml . The complex is stable for 24 hr. Salting-out agents have no effect on the extraction. Gallium can be extracted and determined in a single extraction in presence of many elements associated with it, such as indium, thallium and aluminium.     

苯并-15-冠-5和二苯并-18-冠-6萃取分离铟(III)的研究

本文用斜率法、饱和法以及通过与萃取合物相对应的冠醚配合物晶体的制备及其性质研究, 探讨了In^3^+的萃取机理, 测定并计算了表观萃取平衡常数, 将此萃取体系应用于铟和某些体系应用于铟和某些金属离子的萃取分离, 亦获得较好的结果.     

Effect of the 18-crown-6 and benzo-18-crown-6 on the solvent extraction and separation of lanthanide(III) ions with 8-hydroxyquinoline

The synergistic solvent extraction of 13 lanthanides with mixtures of 8-hydroxyquinoline (HQ) and the crown ethers (S) 18-crown-6 (18C6) or benzo-18-crown-6 (B18C6) in 1,2-dichloroethane has been studied. The composition of the extracted species has been determined as LnQ₃ · S. The values of the equilibrium constant and separation factor have been calculated. Here, the effect of the synergistic agent (18C6 or B18C6) on the extraction process is discussed.     

Solvent extraction of antimony(III) with 18-crown-6 from iodide media

Antimony can be quantitatively extracted from 1M sulphuric acid containing 0.25M potassium iodide with 0.02M 18-crown-6 in methylene chloride, and determined spectrophotometrically at 430 nm. Bismuth, tin, antimony and arsenic can be separated by sequential extraction with 18-crown-6 from aqueous phases with appropriately adjusted sulphuric acid and potassium iodide concentrations.     

Synergic extraction of Eu(III) and Tb(III) by 2-thenoyltrifluoroacetone and tribenzylamine

Synergic extraction of Eu(III) and Tb(III) with 2-thenoyltrifluoroacetone (HTTA) and tribenzylamine (TBA) as neutral donor ligand has been studied in chloroform from perchlorate media at lower pH range. The stoichiometric composition of the adduct was established as M(TTA)₃ · 3TBA for both the elements, having a coordination number 9. The formation constants K_3,0 and K_3,3 and stability constant _3,3 of the organic phase reaction have been calculated. The effect of temperature on the extraction has also been studied. The adducts are stabilized by the large exothermic enthalpy change. The calculated thermodynamic functions such as H, S and G were used to elucidate the mechanism of synergism in which the coordination numbers of the lanthanide ions increased.     

Separation of Sr(II) from Eu(III) across a supported liquid membrane using TEHDGA and 18-crown-6

Journal of Radioanalytical and Nuclear Chemistry - This paper reports the result of process development studies on separation of Sr(II) from Eu(III) in 4 M nitric acid using supported...     

PVC-based dicyclohexano-18-crown-6 sensor for La(III) ions

A new ion-selective electrode (ISE) based on dicyclohexano-18-crown-6 (DC18C6) as a neutral carrier is developed for lanthanum(III) ions. The electrode comprises of dicyclohexano-18-crown-6 (6%), PVC (33%), and ortho-nitrophenyl octyl ether (o-NPOE) (61%). The electrode shows a linear dynamic response in the concentration range of 10⁻⁶ to 10⁻¹ M with a Nernstian slope of 19 mV per decade and a detection limit as 5×10⁻⁷ M. It has a response time of <30 s and can be used for at least 5 months without any significant divergence in potentials. The selectivity coefficients for mono-, di-, and trivalent cations indicate good selectivity for La(III) ions over a large number of interfering cations. The sensor has been used as an indicator electrode in the potentiometric titrations of La(III) with EDTA. The membrane is successfully applied in partially non-aqueous medium. It can be used in the pH range 4-9.     

Selective separation of yttrium(III) through a liquid membrane system using 2-thenoyltrifluoroacetone as an extractant carrier

2-Thenoyltrifluoroacetone has been offered as a mobile carrier in organic phase for the transport and selective separation of yttrium from aqueous media using a liquid membrane system. Perceivably, the use of n-propylamine (PA) in the source phase enhances the transport of yttrium ions. The extraction and stripping conditions have entirely been evaluated and explained. The suggested method has been utilized for the separation of yttrium(III) from its binary mixtures with strontium(II) and some other cations such as Ni²⁺, Co²⁺, Ag⁺, Fe²⁺, Al³⁺, Cu²⁺, Hg²⁺and Cs⁺ in aqueous solutions of pH 5.4 in the presence of PA, while 1 M nitric acid was acting as a stripping agent in the receiving division. Cyanide ion and 5-sulfosalicylic acid have been used as masking agents to minimize the interferences from different transition metal ions and Al³⁺ in the source phase, respectively. ⁹⁰Y in secular equilibrium with ⁹⁰Sr in the source phase, was transferred to receiving phase and separated completely from its long-lived parent isotope. The activity of the transported ⁹⁰Y was found to decay with a half-life 64.17 ± 0.05 h. The purity of yttrium-90 was comparable or better than the other applied liquid membrane systems for purification of yttrium-90.     

Synergistic extraction of americium(III) with 2-thenoyltrifluoroacetone and crown ethers

Extracton, of Am³⁺ in benzene with 2-thenoyltrifluoroacetone (HTTA) and crown ethers (CEs) such as 15-crown-5, 18-crown-6, dicyclohexano-18-crown-6, dibenzo-18-crown-6, dicyclohexano-24-crown-8, and dibenzo-24-crown-8 was investigated. Synergistic effect by CE was observed regardless of the kind of CE examined. The extracted species was found to be Am(TTA)₃(CE), and adduct formation constants between Am(TTA)₃ and CE in the organic phase were determined. The sequence of constant could not be explained only by basicity of CE and the steric effect of CE should be taken into account to elucidate the adduct complex formation.     

Reaction of lead halides with 18-crown-6 and dicyclohexano-18-crown-6: Solvent extraction,synthesis and crystal structure of [Pb(18-crown-6)I2]

Abstract

Solvent extraction of lead halides with 18-crown-6 (18C6), dicyclohexano-18-crown-6 (DC18C6, cis-syn-cis and cis-anti-cis isomers) in chloroform was studied, and the extraction constants corrected for side reactions and ionic strength effects were obtained. The compounds of the same composition as those being extracted were also isolated in crystal form. The molecular structure of the [Pb(18C6)I₂] complex has been determined. Crystals are monoclinic, P2₁/n, a = 11.237(2), b = 10.992(2), c = 8.139(2)Å, β = 97.32(3)°, V = 997.1(7)ų, D_calc = 2.416(2)gcm^?3, Z = 2 for the composition C₁₂H₂₄O₆PbI₂. The final R-factor is 0.043 for 558 unique reflections. The lead atom is coordinated to six oxygen atoms of the crown ether and two iodine atoms forming a hexagonal bipyramidal coordination polyhedron. The 18C6 molecule and the two halogen atoms form a hydrophobic coating for the lead atom which may be assumed to be the main reason of high extraction constants of the iodine complexes. For 10-coordinate lead ion (bidentate counter ions) the cis-syn-cis isomer of DC18C6 appears to be the best extraction reagent, while for 8-coordinate lead ion (monodentate halide anion) no difference between isomers was observed.     

Synergistic effect of tris(4-isopropyltropolonato)cobalt(III) on the extraction of lanthanoid(III) with 2-thenoyltrifluoroacetone.

Synergistic enhancement of the extraction of lanthanoid(III) (Ln) with 2-thenoyltrifluoroacetone (Htta) in benzene has been found by the addition of tris(4-isopropyltropolonato)cobalt(III) (Co(ipt)3). The synergistic effect of Co(ipt)3 was ascribed to the formation of a 1:1 adduct of Ln(tta)3 with Co(ipt)3, i.e., a binuclear complex, in the organic phase. The adduct formation constant (beta s,1) determined by the extraction equilibrium analysis was reasonably consistent with that determined by spectrophotometry. The beta s,1 values decreased with increase in the atomic number of Ln and showed a large difference between light and heavy Ln. Spectroscopic studies were performed to explain the difference in the beta s,1 values. Electronic absorption spectra showed that the change in the structure of Co(ipt)3 complexed with the light Ln chelate is larger than that with the heavy Ln. The IR spectra showed the displacement of the coordinated water molecules of the light Ln chelates with Co(ipt)3. On the other hand, the adduct formation of heavy Ln was caused by the hydrogen bonding between Co(ipt)3 and the coordinated water of the Ln chelate.     

An unusual extraction behavior of americium (III) and dioxouranium (VI) from picric acid medium using 18-crown-6 as neutral oxodonor

The extraction behavior of Am³⁺ and UO₂ ²⁺ is investigated employing chloroform solution of 18-crown-6 as the organic phase and picrate solution at pH 3.0 as the aqueous phase. In contrast to the commonly observed behavior, the extraction of Am³⁺ is preferred to that of UO₂ ²⁺. This unusual separation behavior is investigated as a function of several variable parameters such as crown ether concentration, picric acid concentration, inert electrolyte concentration, nature of diluent etc. Thermodynamic parameters are also evaluated.     

Synthesis and crystal structure of hexakis(isothiocyanato)erbium(III) thiocyanate bis(18-crown-6)dipotassium bis[(18-crown-6)ethanolpotassium]

A new complex compound, [K₂(18-crown-6)₂[K(18-crown-6)(EtOH)]₂[Er(NCS)₆](SCN) (I), was synthesized and its crystal structure was studied by X-ray diffraction. In this work, the synthes and X-ray difraction stady of the crystals of a new complex, hexakis (isothiocyanato) erbiu(III) thiocyanate bis(18-crown-6) dipotassium bis(18-crown-6) ethanolpotassium], [K₂(18-crown-6)₂][K(18-crown-6)(ETON)]₂[Er(NCS)₆(SCN)(I)] are described. In crystal I, the alternating [Er(NCS)₆]^3? anions and binuclear complex cation [K(18-crown-6)₂]²⁺ from infinite chains via the F-S bonds, while two complex cations [K(18-crown-6)(ETON)]⁺ and the statistically disordered SCN^? anion between them are linked by the hydragen bonds O-H…S and O-H…N. Complex I contains the host-guest complex cations [K₂(18-crown-6)₂)]²⁺ and [K(18-crown-6)(ETON)]⁺ [1]. The alternating octabedral [Er(NCS)₆]^3? anions and binuclear complex cations [K₂(18-crown-6)₂]²⁺of crystal I form infinite chains via the K-S bonds, while two complex cations [K(18-crown-6)(EtOH)]⁺ and the statistically disordered SCN^? anion lying between them are linked by interionic hydrogen bonds O-H…S and O-H…N. Complex I contains the host-guest complex cations [K₂(18-crown-6)₂]²⁺ and [K(18-crown-6)(EtOH)]⁺ [1].     

Synergic extraction of lanthanoid(III) with 2-thenoyltrifluoroacetone and triphenylarsine oxide in benzene

The synergic extraction of La(III), Eu(III), and Lu(III) with 2-thenoyltrifluoroacetone (Htta) and triphenylarsine oxide (tpao) in benzene has been studied. The extractability of lanthanoids, Ln(III), is significantly affected by the association of Htta with tpao in the organic phase. The associated species is Htta·tpao and the association constant is determined as 10^1.63. The intrinsic extraction equilibrium of Ln(III) is analyzed using the free concentration of Htta and tpao. The synergic enhancement is ascribable to the formation of the adduct complexes shown as Ln(tta)₃tpao and Ln(tta)₃(tpao)₂ in the present extraction system. The adduct formation constants determined are very large as expected from the high basicity of tpao.     

Synthesis and crystal structure of diaqua(trinitrato)iron(III) 18-crown-6

A novel complex adduct, diaqua(trinitrato)iron(III) 18-crown-6, [Fe(NO₃)₃(H₂O)₂] · 18-crown-6, was synthesized and its crystal structure was studied by X-ray diffraction: space group C2/c, a = 10.073, b = 18.069, c = 25.326 Å, β = 91.51°, Z = 8. The structure was solved by the direct method and refined by the full-matrix least-squares method in the anisotropic approximation to R = 0.076 for 4090 independent reflections (CAD-4 automated diffractometer, λMoK_α). The structure contains isolated complex molecule [Fe(NO₃)₃(H₂O)₂] and two halves of independent molecules 18-crown-6, one of which is statistically disordered about axis 2, while another one is located around the inversion center and is somewhat disordered with respect to the latter. In the complex molecule, the coordination polyhedron of the Fe³⁺ cation is a distorted pentagonal bipyramid with five O atoms of three NO ₃ ^? ligands in a base and two O atoms of two water molecules in the axial vertices. The alternating complex molecules and the disordered 18-crown-6 molecules are joined by hydrogen bonds into “thick” infinite chains along the z axis.     

(Dibenzo-18-crown-6)potassium tetrachloroferrate(III): Synthesis and crystal structure

A new complex [K(Db18C6)]⁺[FeCl₄]^? (I) is synthesized and its structure is studied by X-ray diffraction analysis. The crystals are triclinic: space group P \(\bar 1\), a = 17.998, b = 18.670, c = 19.590 Å, α = 106.61°, β = 104.55°, γ = 113.87°, Z = 8. The structure is solved by a direct method and refined by the full-matrix least-squares method in the anisotropic approximation to R = 0.057 by 13 670 independent reflections (CAD-4 automated diffractometer, λMoK _α). All the four independent complex cations [K(Db18C6)]⁺ are host-guest, and in each complex cation the K⁺ cation is localized in the cavity of the Db18C6 crown ligand. The coordination polyhedron of K⁺ (coordination number nine) is a distorted hexagonal bipyramid with the base of all six O atoms of the Db18C6 ligand, the axial vertex at the Cl atom of the [FeCl₄]^? anion, and another bifurcated axial vertex at two Cl atoms of another [FeCL₄]^? anion. All the four independent [FeCL₄]^? anions are orientationally disordered and have somewhat distorted tetrahedral structure. In crystal I, the alternating complex cations [K(Db18C6)]⁺ and [FeCL₄]^? anions form infinite polymer chains by the K-Cl bonds.     

Synthesis and crystal structure of triaqua(18-crown-6)calcium bis(perchlorate) 18-crown-6 monohydrate

A complex [Ca(18C6)(H₂O)₃]²⁺(ClO ₄ ^? · 18C6 · H₂O is synthesized and studied by X-ray diffraction analysis. The structure (space group P2₁/n, a = 11.570 Å, b = 16.024 Å, c = 22.225 Å, β = 98.89°, Z = 4) is solved by a direct method and refined by the full-matrix least-squares method in the anisotropic approximation to R = 0.075 for 5305 independent reflections (CAD4 automated diffractometer, λMoK _α radiation). In the complex cation of the host-guest type, the Ca²⁺ cation lies in the cavity of the 18-crown-6 ligand and is coordinated by all the six O atoms and three O atoms of three water molecules. In a crystal, the alternating complex anions, 18C6 molecules, and water molecules are joined by hydrogen bonds into broad infinite chains along the y axis. The disordered ClO ₄ ^? anions are bonded to these chains on the side through hydrogen bonds.     

Solvent extraction of microamounts of strontium and barium into nitrobenzene by using synergistic mixture of hydrogen dicarbollylcobaltate and dicyclohexano-18-crown-6

Extraction of microamounts of strontium and barium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of dicyclohexano-18-crown-6 (DCH18C6, L) has been investigated. The equilibrium data have been explained assuming that the complexes HL⁺, $ {\text{HL}}_{ 2}^{ + } $ , ML²⁺ and $ {\text{ML}}_{ 2}^{ 2+ } $ (M²⁺ = Sr²⁺, Ba²⁺) are extracted into the organic phase. The values of extraction and stability constants of the species in nitrobenzene saturated with water have been determined. It was found that in the mentioned medium the stability constants of the complexes BaL²⁺ and $ {\text{BaL}}_{2}^{2 + }, $ where L = DCH18C6, are somewhat higher than those of the species SrL²⁺ and $ {\text{SrL}}_{2}^{2 + } $ with the same ligand L.