Photolysis of oxygen saturated ethers in the presence of Sn(Ⅱ) or Cu(Ⅱ) salts

Photolysis of diethyl ether-oxygen charge transfer complex in the presence of Sn(Ⅱ)or Cu(Ⅱ)salts gave higher yields of the oxidation products,ethyl acetate,acetaldehyde,ethanol,ethyl formate and methanol compared with those without the salts.In addition,the photolysis of an oxygen saturated te-trahydrofuran(THF)or dibutyl ether solution gave y-butyro-lactone or butanol and butyl butyrate as major products with small amounts of undetermined compounds,respectively.Their yields were also affected by the addition of Cu(Ⅱ)or Sn(Ⅱ)salts.     

Liquid-phase catalytic oxidation of organic substrates by a recyclable polymer-supported copper(II) complex

Chloromethylated polystyrene beads cross-linked with 6.5 % divinylbenzene were functionalized with 2-(2′-pyridyl) benzimidazole (PBIMH) and on subsequent treatment with Cu(OAc)₂ in methanol gave a polymer-supported diacetatobis(2-pyridylbenzimidazole)copper(II) complex [PS-(PBIM)₂Cu(II)], which was characterized by physicochemical techniques. The supported complex showed excellent catalytic activity toward the oxidation of industrially important organic compounds such as phenol, benzyl alcohol, cyclohexanol, styrene, and ethylbenzene. An effective catalytic protocol was developed by varying reaction parameters such as the catalyst and substrate concentrations, reaction time, temperature, and substrate-to-oxidant ratio to obtain maximum selectivity with high yields of products. Possible reaction mechanisms were worked out. The catalyst could be recycled five times without any metal leaching or much loss in activity. This catalyst is truly heterogeneous and allows for easy work up, as well as recyclability and excellent product yields under mild conditions.     

Selective oxidation of sulfides and oxidative bromination of organic substrates catalyzed by polymer anchored Cu(II) complex

A new polymer-anchored Cu(II) complex has been synthesized and characterized. The catalytic performance of the complex has been tested for the oxidation of sulfides and in oxidative bromination reaction with hydrogen peroxide as the oxidant. Sulfides have been selectively oxidized to the corresponding sulfoxides in excellent yields and in the presence of KBr as the bromine source, organic substrates have been selectively converted to mono bromo substituted compounds using polymer-anchored Cu(II) catalyst. This catalyst showed excellent catalytic activity, high selectivity, and recyclability. The polymer-anchored Cu(II) catalyst could be easily recovered by filtration and reused more than five times without appreciable loss of its initial activity.     

An anionic, tetragonal copper(II) superoxide complex

Insight into copper-oxygen species proposed as intermediates in oxidation catalysis is provided by the identification of a Cu(II)-superoxide complex supported by a sterically hindered, pyridinedicarboxamide ligand. A tetragonal, end-on superoxide structure is proposed based on DFT calculations and UV-vis, NMR, EPR, and resonance Raman spectroscopy. The complex yields a trans-1,2-peroxodicopper(II) species upon reaction with [(tmpa)Cu(CH(3)CN)]OTf and, unlike other known Cu(II)-superoxide complexes, acts as a base rather than an electrophilic (H-atom abstracting) reagent in reactions with phenols.     

Preparation and characterization of Cu (II) Schiff base complex functionalized boehmite nanoparticles and its application as an effective catalyst for oxidation of sulfides and thiols

The synthesis, characterization, and evaluation of a Schiff base Cu (II) complex functionalized boehmite nanoparticles (Cu-complex-boehmite) as a new catalyst for oxidation of sulfides and thiols in the presence of hydrogen peroxide with complete selectivity and high conversion under solvent-free and mild reaction conditions were reported. Characterization of the catalyst was performed with various physicochemical methods. This effective catalyst was evaluated in terms of activity and reusability. It indicated high catalytic activity, good recoverability and reusability, and supplied the corresponding products in high yields and short reaction times. In addition, it shows notable advantages such as simplicity of operation, heterogeneous nature, easy work up, and it could be used at least eight times with no significant loss of its activity.     

二十四元六氮大环双核铜(I)配合物的氧化去甲基作用: 单加氧酶的模拟

以5-溴-2-甲氧基-1, 3-苯二甲醛与二乙烯三胺通过[2+2]缩合,合成了一个新的六氮杂二十四元大环配体, 并在[Cu(CH3CN)4]ClO4存在下生成Cu(I)大环配合物, 然后在空气(或氧气)中氧化, 得到了新的大环双核Cu(II)配合物, 用多种方法对其进行了表征, 用1H NMR谱等方法鉴定了氧化产物。实验结果表明: 在Cu(I)配合物氧化过程中,能使配体环上的一个甲氧基发生断裂, 形成苯氧桥和水桥联的Cu(II)配合物。在木质素酶等单加氧酶的氧化过程中也伴随着氧化去甲基作用。本文首次用大环配合物对这一过程进行了模拟, 并测定了氧化反应中的吸氧量和吸氧速率常数。     

Chiral zinc(II) and copper(II)-catalyzed asymmetric ring-opening reactions of meso-epoxides with aniline and indole derivatives

The ring-opening reactions of meso-epoxides with aniline and indole derivatives proceeded smoothly in water in the presence of Zn(II) and Cu(II) surfactant-type catalysts to afford the corresponding products in moderate to high yields with good to excellent enantioselectivities. Opposite enantiomers were obtained by using Sc(III) and Zn(II) or Cu(II) with the same chiral ligand. Crystal structures of these catalysts may explain the reversal of the enantioselectivity. Some reactions were also tested in dichloromethane (DCM), and it was revealed that the reactions proceeded faster in water than in DCM. Finally, several non-linear effect experiments suggested unique structure of these chiral catalysts.     

Heteroleptic copper switches

Heteroleptic copper compounds have been designed and synthesized on solid supports. Chemical redox agents were used to change the oxidation state of the SiO(2)-immobilized heteroleptic copper compounds from Cu(I) to Cu(II) and then back to Cu(I). Optical spectroscopy of a dimethyl sulfoxide suspension demonstrated the reversibility of the Cu(I)/Cu(II) SiO(2)-immobilized compounds by monitoring the metal-to-ligand charge transfer peak at about 450 nm. Electron paramagnetic resonance spectroscopy was used to monitor the isomerization of Cu(I) tetrahedral to Cu(II) square planar. This conformational change corresponds to a 90° rotation of one ligand with respect to the other. Conductive atomic force microscopy and macroscopic gold electrodes were used to study the electrical properties of a p(+) Si-immobilized heteroleptic copper compound where switching between the Cu(I)/Cu(II) states occurred at -0.8 and +2.3 V.     

Charge-transfer spectra of structurally characterized mixed-valence thiolate-bridged Cu(I)/Cu(II) cluster complexes

A series of Cu(II) and Cu(I)/Cu(II) complexes containing the cis-N(amine)(2)S(thiolate)(2) copper complex rac-2 has been synthesized to provide a basis for understanding the charge-transfer spectra of mixed-valence thiolate-bridged Cu(I)/Cu(II) complexes. In combination with Cu(Me(2)-13-N(4)ane), rac-2 yields a monobridged dinuclear homovalent adduct, rac-5, while reaction with CuCl yields the mixed-valance pentanuclear complex rac-6. In the presence of Cu(II)(acac)(2), chiral R,R-1 reacts to form a mixed-valence pentanuclear cation R,R-7. rac-6 exhibits a relatively short Cu(I). Cu(II) contact [2.8231(9) A] and associated structural features that suggest the presence of a weak Cu(I).Cu(II) interaction in a valence-trapped system. Additional structural features in rac-6 and R,R-7 include singly and doubly bridging thiolates, three- and four-coordinated Cu(I) ions, and varying Cu(I) ligand sets. These features extend the types and complexities of electronic absorptions significantly. Spectra of rac-6 and R,R-7 exhibit multiple overlapping absorptions over the entire visible and ultraviolet spectral regions studied, consonant with these observations. Trends resulting from variations in structure type and oxidation state permit a first approach toward developing a detailed assignment of the individual ligand Rydberg, LF, LMCT, MLCT, and possible MMCT absorptions in these complexes.     

Interaction of metal ions with polypyrrole on polyacrylic acid matrix

The oxidative matrix polymerization of pyrrole (Py) by Fe(III), Cu(II), Ni(II), Co(II), and Zn(II) in the presence of polyacrylic acid (PAA) was studied and water‐soluble products along with insoluble products were obtained. The metal (Me) content of the insoluble part was determined by using atomic absorption spectroscopy (AAS). The effects of the oxidation potential of Me ions and ligands on the aggregation of polypyrrole (PPy) on the matrix polymer were measured by ultraviolet (UV)‐visible spectra. These findings also were checked by cyclic voltammetry (CV) measurements on PAA–Cu and PAA–PPy–Cu interactions. The conductometric titration results of PAA–PPy–Me ternary solutions were explained in the light of the interaction of Me ions with Py to polymerize on the PAA matrix resulting in some free carboxyl groups with a possibility of having Me–polymer complexes and a ternary complex (PAA–Me–PPy). The insoluble products were characterized by Fourier transform infrared (FTIR), elemental analysis, scanning electron microscopy (SEM), and four point probe conductivity measurements. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1115–1123, 1999     

DNA damage induced by sulfite autoxidation catalyzed by copper(II) tetraglycine complexes

Copper(II)/(III) tetraglycine complexes were investigated for their ability to catalyze the autoxidation of sulfite resulting in oxidative DNA damage. The focus of this work is on DNA damage by Cu(III) and oxysulfur radicals formed by the oxidation of S(IV) oxides by dissolved oxygen in the presence of Cu(II) tetraglycine complexes. The results suggest that sulfite is rapidly oxidized by oxygen in the presence of Cu(II) complexes producing Cu(III) tetraglycine, which can be monitored spectrophotometrically at 365 nm. A synergistic effect of Cu(II) with a second metal ion (Ni(II), Co(II) or Mn(II) traces) was observed.     

Cu(II)‐Catalyzed Ligand‐Free Oxidation of Diarylmethanes and Second Alcohols in Water

We developed a simple and efficient Cu(II )‐catalyzed ligand‐free oxidation of diarylmethanes and secondary alcohols using 70% tert‐butyl hydroperoxide (TBHP ) in water. A series of diarylmethanes were directly oxidized into diaryl ketones in 67%–98% yields. Additionally, various secondary alcohols were also transformed into the desired products in 48%–98% yields. Importantly, the catalytic system in the absence of any organic solvent, surfactant, or phase transfer agent, had a wide substrate scope and a high tolerance for various functional groups.     

Nucleophilic Substitution on Porphyrin Ring： Synthesis of 2-（2-Hydroxynaphthyl）-5,10,15,20-tetraphenylporphyrin

The reactions of 2-nitro-5,10,15,20-tetraphenylporphyrin （1） and its Ni （Ⅱ） （2）, Cu （Ⅱ） （3）, Zn （Ⅱ） （4） complexes with sodium 2-naphthoxide have been investigated in different solvents for preparing 2-substituted porphyrins. 2-（2-Hydroxynaphthyl）-5,10,15,20-tetraphenyl porphyrin （5） and its Ni （Ⅱ） （6）, Cu （Ⅱ） （7）, Zn （Ⅱ） （8） complexes were obtained in 72%, 78%, 81% and 65% yields in 2-naphthol at 150 ℃ respectively. The same products were also obtained in other protic solvents such as diglycol and diglycol monomethyl ether. When the reactions proceeded in aprotic solvent DMF at 150 ℃, besides 5 （70%）, 6 （34%）, 7 （54%） and 8 （50%）, the corresponding 2-（2-naphythoxy）-5, 10,15,20-tetraphenylporphyrin （9）, and its Ni （Ⅱ） （10）, Cu （Ⅱ） （11）, Zn （Ⅱ） （12） complexes were also obtained in minor, 40%, 18% and 2% yields respectively, but only 5, 6, 7, 8 were found at room temperature in DMF or DMSO. These reactions axe much faster than those of 1-4 with sodium phenoxide. The formation of C-coupling products 5-8 was proposed via SRN 1 mechanism.     

Metathesis transformations of natural products: cross-metathesis of natural rubber and mandarin oil by Ru-alkylidene catalysts

This study reports on the degradation of natural rubber (NR) via crossmetathesis with mandarin oil and d-limonene, an abundant compound in essential oils; that were used as chain transfer agents (CTAs) and green solvents. Reactions were performed in the presence of the ruthenium-alkylidene catalysts (PCy?)?(Cl)?Ru=CHPh (I) and (1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) (PCy?)Cl?Ru=CHPh (II), respectively. Catalyst II bears an N-heterocyclic carbene ligand (NHC) bounded to the ruthenium atom, which has a strong basic character; therefore it is more active toward trisubstituted olefins in comparison with catalyst I. In both cases, isolated monoterpene-terminated isoprene oligomers were obtained as products of the cross-metathesis degradation of NR. In the presence of catalyst II molecular weight values around M(n) × 102 and yields of 80% were obtained; whereas with catalyst I, the molecular weights of products were about M(n) × 10? with yields ranging 70 to 74%. The composition and yield of NR degradation products were determined by GC/MS (EI) analysis and it was found that the oligomers obtained have primarily one vinyl group and one terpene-monocyclic group at the chain end, with isoprene units A(m) = 2, 3 y 4.     

Speciation of copper, lead and cadmium in aquatic systems by circulating dialysis combined with flame AAS

The assessment of free Cu(II), Pb(II) and Cd(II) ions in the presence of complexed species was realised by a circulating dialysis with Cuprophan planar membranes and subsequent quantification by flame atomic absorption spectrometry. The effect of the flow rate, the time of equilibration, pH and the presence of various complexing agents in the donor solutions were studied. The determination of free Cu(II), Pb(II) and Cd(II) ions in the presence of soil humic substances resulted from the above studies.     

Speciation of copper, lead and cadmium in aquatic systems by circulating dialysis combined with flame AAS

The assessment of free Cu(II), Pb(II) and Cd(II) ions in the presence of complexed species was realised by a circulating dialysis with Cuprophan planar membranes and subsequent quantification by flame atomic absorption spectrometry. The effect of the flow rate, the time of equilibration, pH and the presence of various complexing agents in the donor solutions were studied. The determination of free Cu(II), Pb(II) and Cd(II) ions in the presence of soil humic substances resulted from the above studies.     

Cyclodextrins for remediation of soils contaminated with chlorinated organics

The effect of random methylated ??CD (RAMEB) on the efficiency of various remediation technologies was studied in lab-scale model-experiments applying soil and groundwater originating from a site contaminated with trichloroethylene (TCE). The solubility of TCE was enhanced to tenfold in 10% solution of RAMEB compared to that in water. This solubilizing effect was utilized for remediation of the TCE contaminated soil using enhanced groundwater extraction and in situ TCE oxidation by ISCO (= in situ chemical oxidation). The effect of CD on TCE extraction from soil was studied using two technologies: ground-water extraction followed by air stripping or UV irradiation. The RAMEB-enhanced ISCO was applied directly to the water-saturated soil without water extraction or separation. The efficiency of air stripping of TCE (removal by bubbling air through the contaminated ground-water obtained by extraction) was decreased in the presence of RAMEB due to the volatility decreasing effect of complexation. The efficiency of the entire technology (extraction and air stripping together) was, however, enhanced as three times more TCE was dissolved, and more than twice as much could be removed when 5% RAMEB solution was applied instead of water. Similar results were obtained by UV irradiation. Although the complexation has a protective effect against degradation caused by irradiation, the efficiency of the technology (extraction and subsequent UV irradiation) is enhanced to approximately threefold, because more than 10 times higher TCE concentration was found in the extract using 20% RAMEB concentration. ISCO is based on Fe-catalyzed oxidation using hydrogen peroxide. The catalytic effect of RAMEB was observed only when it was applied together with Fe(II) salts. Without Fe(II) the effect of complex formation dominated. When hydrogen peroxide and FeSO₄ were applied with RAMEB, over five times enhancement in TCE removal was obtained compared to the technology based on the addition of hydrogen peroxide and Fe(II) salts without RAMEB. This effect shows that the solubilizing effect on iron catalyst is at least as much or even more important than the solubilizing effect on TCE. The ternary complex formation with ferrous/ferric ion and TCE seems to be responsible for the enhanced efficacy.     

Micellar colorimetric determination of iron, cobalt, nickel and copper using 1-nitroso-2-naphthol

1-Nitroso-2-naphthol, an excellent color-forming chelating agent, combines to Fe(III), Co(II), Ni(II), Cu(II) and so on to form slightly soluble complexes in aqueous solution. To determine these metal ions, a tedious and time consuming separation technique, such as liquid-liquid extraction, has often been performed. However, these metal-1-nitroso-2-naphthol complexes could be determined conveniently by ultraviolet-visible (UV-Vis) spectrophotometry in Tween 80 micellar medium that has polyoxyethylene groups. After conditions such as pH, the amount of 1-nitroso-2-naphthol and the stability were adjusted to their optimum values, the sensitivities of the metal ions in Tween 80 medium and in chloroform were compared. It was shown that the sensitivities of Fe(III) and Co(II) in Tween 80 medium were higher than in chloroform, but that of Cu(II) was lower. The interfering effects among analytes ions, Fe(III), Co(II), Ni(II) and Cu(II) were more serious than by other ions, but the interfering effects could be removed by adjusting pH or adding the masking agents such as NH(3) or oxalate. Detection limits of Fe(III), Co(II), Ni(II), and Cu(II) were 0.024, 0.016, 0.039 and 0.023 mug ml(-1), respectively, and the correlation coefficients of these calibration curves were above 0.996. Recovery yields of the metal ions in the mixed standard solution ranged from 96 to 103%, and their coefficients of variation were low ranging between 0.94 and 1.75%. Cu(II) in brass sample and the amount of Fe(III) in steel sample were also determined. This proposed technique is simple, convenient and speedy.     

Copper(II) complexes of N-octylated bis(benzimidazole) diamide ligands and their peroxide-dependent oxidation of aryl alcohols

New N-octylated benzimidazole-based diamide ligands N,N'-bis(N-octylbenzimidazolyl-2-ethyl)hexanediamide (O-ABHA), possessing a chiral center, and N,N'-bis(N-octylbenzimidazolyl-2-methyl)hexanediamide (O-GBHA) have been synthesized and utilized to prepare Cu(II) complexes of general composition [Cu(L)X]X, where L = O-ABHA or O-GBHA and X = Cl(-) or NO(3)(-) . The X-ray structure of one of the complexes, [Cu(O-GBHA)NO(3)]NO(3), has been obtained. The Cu(II) ion is found to possess a distorted octahedral geometry with a highly unsymmetrical bidentate nitrate group. The N(2)O(2) equatorial plane comprises an amide carbonyl O, a nitrate O, and the two benzimidazole imine N atoms while another amide carbonyl O and nitrate O take up the axial positions. The complexes carry out the oxidation of aromatic alcohols to aldehydes in the presence of cumenyl hydroperoxide at 40-45 degrees C and act as catalyst with turnovers varying between 13- and 27-fold. The percentage yields of the respective products have been obtained which vary from 32% to 65% with respect to the catalyst turnover.     

Sonochemical Preparation of Dipicolinamide Mn‐complexes and Their Application as Catalysts Towards Sono‐synthesis of Ketones

A series of non‐heme Mn‐complexes has been synthesized by the sonication of manganese (II)chloride and bis‐amides (condensation products of 2‐picolinic acid and o‐phenylenediamines). The Mn‐complexes effectively promote the oxidation of unactivated aliphatic and benzylic C─H and N‐bearing heterocycles substrates with low catalyst loading using eco‐friendly hydrogen peroxide in the presence of acetic acid as additive under ultrasonic irradiation. Chromatographic studies revealed that the corresponding ketones are the only detectable products. Noteworthy, the presence of electron donors in the catalyst structure significantly increased the reaction yields. The substantial lowering of the oxidation reaction yields by adding ionol (2,6‐di‐tert‐butyl‐4‐methylphenol) as a free radical trap suggesting a free radical reaction pathway.