Surface chemical modification of waxy maize starch nanocrystals

The surface of waxy maize starch nanocrystals obtained from sulfuric acid hydrolysis of native waxy maize starch granules was chemically modified using two different reagents, namely, alkenyl succinic anhydride and phenyl isocyanate. The occurrence of chemical modification was evaluated by FTIR and X-ray photoelectron spectroscopies. Contact angle measurements from which the surface energy of the materials under investigation was deduced showed that chemical modification led to more hydrophobic particles. Chemical modification altered the morphology of particles, as shown by observation by transmission electron microscopy, but not their crystallinity (X-ray diffraction analysis).     

Surface modification of magnetic nanoparticles capped by oleic acids: characterization and colloidal stability in polar solvents

The lyophobic surface of monodisperse magnetic nanoparticles capped by oleic acid was made to be more lyophilic by ozonolysis to increase the stability of the suspension in polar solvents like ethanol. The ozone oxidatively cleaved the double bond of oleic acid to form carbonyl and carboxyl groups on the surface of the nanoparticles. Additionally, interfacial ligand exchange of the capping molecules was applied to make the hydrophobic particle surface more hydrophilic. The magnetic particles showed enhanced miscibility and short-term stability in water after interfacial ligand exchange. The structure changes of the capping molecules on the nanoparticle surfaces were investigated using Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). From these spectroscopy studies, the cleavage of the oleic acid and the formations of the carboxyl and carbonyl groups on the particle surface were confirmed. The shape and the magnetic properties of the nanoparticles were maintained after the surface modification. Ozonolysis is an effective method in modifying the lyophobic surface of the magnetic nanoparticles.     

An approach to core–shell nanostructured materials with high colloidal and chemical stability: synthesis, characterization and mechanistic evaluation

Silver–polypyrrole (PPy) core–shell nanoparticles have been fabricated by a facile one-step “green” synthesis using silver nitrate as an oxidant and soluble starch as an environmentally benign stabilizer and co-reducing agent. The morphology and optical properties of the particles were significantly affected by the reaction temperature, soluble starch concentration, and ratio of pyrrole monomer to AgNO₃ oxidant. The core–shell nanoparticles exhibited outstanding dispersive properties in deionized water due to residual starch, as compared with PPy nanoparticles in which starch was absent. The mechanism of core–shell nanoparticle formation was elucidated through TEM imaging vs. reaction time. The colloidal and chemical stability of the nanoparticles was demonstrated in a variety of solvents, including acids, bases, and ionic and organic solvents, through monitoring the localized surface plasmon resonance of the nanoparticles. Furthermore, the catalytic properties of these silver–PPy core–shell nanoparticles were also demonstrated.

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

Inorganic reinforcement in PET/silica electrospun nanofibers

PET/silica nanocomposite fibers of high quality were fabricated from electrospinning by choosing appropriate surface modification of inorganic fillers, solution properties, and processing conditions. The existence of an immobilized layer around silane-modified silica particles in PET fibers was verified by Fourier transform infrared spectroscopy, the results of which confirm previous thermal analysis studies. The influence of silica particles on the crystal growth during isothermal crystallization as well as the phase structure of the crystallized nanocomposite fibers were examined using differential scanning calorimetry. The PET crystallization rate increases significantly with increasing silica content, which indicates that the silica nanoparticles act as an efficient nucleating agent to facilitate PET crystallization. Using Avrami analysis, for the first time, preferred 1-D crystal growth was confirmed for geometrically confined nanocomposite fibers. Addition of silica particles makes the crystal growth more likely to occur in a 1-D manner.     

Influence of pyrogenic particles on the micromechanical behavior of thin sol-gel layers

Coatings based on sol-gel technology with different types of nanoparticles embedded into the sol-gel matrix were fabricated, and the resulting properties were investigated. Pyrogenic silica nanoparticles were added to the sol before coating. The silica particles varied in primary particle size and agglomerate size, and in their surface modification. The particles were wetted in ethanol and dispersed to certain finenesses. The difference in agglomerate size was partly caused by varying particle types, but also by the dispersing processes that were applied to the particles. The resulting coatings were examined by visual appearance and SEM microscopy. Furthermore, their micromechanical properties were determined by nanoindentation. The results show an important influence from the added nanoparticles and their properties on the visual appearance as well as the micromechanical behavior of the sol-gel coatings. It is shown that, in fact, the particle size distribution can have a major impact on the coating properties as well as the surface modification.     

In Situ Treatment of Thermal RF Plasma Processed Nanopowders to Control their Agglomeration and Dispersability

Titanium carbonitride nanoparticles have been produced in an inductively coupled thermal plasma and subsequently modified using a surfactant that has been deposited in situ on their surface in-flight. The surfactant was injected in the reactor while the nanoparticles are still dispersed in the gas phase, allowing the coating of primary particles instead of the corresponding agglomerates. In contrast to naked TiCN nanoparticles, the surfactant coated particles could be readily dispersed in water with a short ultrasonic treatment and built up no large agglomerates as proved by Photon Correlation Spectroscopy measurements. The investigated surfactants seem, however, to undergo a chemical modification and/or a thermal degradation at the surface of the TiCN nanoparticles.     

油溶性Ag纳米微粒的制备及表征

Surface modified silver nano particles were synthesized in a mixture solvent of water-alcohol with Pyridinium di-n-octadecyldithio phosphate(PyDDP) as a modification agent. Themorphology and structure of DDP-coated Ag (Ag-DDP) nanoparticles were characterized using X-ray powder diffraction(XRD), Transmission electron microscopy(TEM), Fourier transform infrared spectrum (FT-IR) and Thermo gravimetric analysis(TGA). Anti wear properties of Ag-DDP nano particles were tested using a four-ball tribological testing machine. The disperse properties of Ag-DDP nanoparticles were evaluated in solvents such as chloroform, benzen, toluene, liquid paraffin, distilled water and ethanol. The results show that Ag-DDP nanoparticles disperse in organic solvents, but they don’t disperse in water or ethanol. The good disperse properties in organic solvents enable Ag-DDP nanoparticles to be used as oil additives. The XRD pattern of Ag-DDP nanoparticles indicates that they have fcc crystal structure, and the modification layer can prevent the oxidation of Ag nanocores. TEM graphs show that Ag-DDP nanoparticles have a homogeneous grain distribution; the average diameter is about 15nm. FT-IR and TGA curves indicate that the existence of modification layer can prevent the adsorption of water on the surface of nanoparticles. Tribological tests show that Ag-DDP nanoparticles have good anti-wear properties in liquid paraffin, and they can improve the applied load of base oil.     

脉冲激光制备发光碳纳米颗粒

利用毫秒脉冲激光辐照石墨悬浮液制备了超细碳纳米颗粒, 经过有机聚合物PEG 2000N的表面修饰, 碳纳米颗粒发出了较强的可见光, 并具有双光子激发的特征. 利用硫酸奎宁作参比, 测得碳纳米颗粒的荧光量子产率为6.3%. 石墨颗粒通过吸收激光能量快速升温并升华, 形成了大量的碳蒸气; 在周围液体介质的冷却下, 通过凝聚形成了碳纳米颗粒. 由于尺寸量子限制效应, 经过有机聚合物修饰后, 碳纳米颗粒表面产生了能量势阱, 导致了碳纳米颗粒的可见光发射. 发光的碳纳米颗粒具有无毒、化学惰性和良好的生物相容性, 在生物医药领域具有重要的应用价值.     

Synthesis and surface treatment of magnetite nanoparticles for tuning hydrophobicity and colloidal stability

Post-synthetic surface modification of magnetite nanoparticles synthesized by a modified co-precipitation process was carried out with triethoxy-terminated perfluoropolyether (PFPE) oligomers. The chemisorption of PFPE oligomers on the surface of magnetites was confirmed by ATR-FTIR and TGA analyses. The efficiency of surface modification of the oligomer to prevent the aggregation of magnetite nanoparticles was studied with the dynamic light scattering technique by measuring the hydrodynamic diameter and polydispersity index of the surface treated nanoparticles, together with their zeta potential. Aggregation kinetics profiles were constructed for surface treated nanoparticles. The obtained data was compared with magnetite nanoparticles treated with critic acid, to assess the efficiency of the surface modification with the PFPE oligomers. The comparison showed that the bifunctional PFPE oligomer treated nanoparticles are characterized by improved colloidal stability and hydrophobicity.     

Thermosensitive polymer (N-isopropylacrylamide) coated nanomagnetic particles: preparation and characterization

Thermosensitive polymer coated nanomagnetic adsorbents were synthesized by seed polymerization using surface modified nanomagnetic particles as the seeds. The Fe3O4 nanomagnetic particles were prepared by chemical precipitation of Fe2+ and Fe3+ salts in the ratio of 1:2 under alkaline and inert condition. The surface of these particles was modified by surfactants to achieve stability against agglomeration. These stable particles were then polymerized using N-isopropylacrylamide (NIPAM) as the main monomer, methylene-bis-acrylamide as the crosslinker and potassium per sulfate as the initiator. The thermosensitive adsorbents were characterized by using transmission electron micrography (TEM) and vibrating sample magnetometer (VSM). TEM showed that the particle remained discrete with a mean diameter of 12 nm. Magnetic measurements revealed that the particles are superparamagnetic only with a decrease of magnetism after binding with the polymer due to the increase in surface spin disorientation. Pure Fe3O4 spinel structure of these nanoparticles was indicated by the X-ray diffraction (XRD) patterns. The polymerization of NIPAM with the surface modified nanomagnetic particles was confirmed by Fourier transform spectroscopy (FTIR), Thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). In addition, the adsorption/desorption of BSA molecule on these thermosensitive nanoparticles was investigated as a function of temperature. More than 60% desorption efficiency was achieved under appropriate condition.     

纳米氧化锌的机械力化学表面改性

采用机械力化学表面改性工艺,以硬脂酸为改性剂,在气流粉碎机中对纳米氧化锌进行解团聚和表面改性,并借助SEM、XRD、FF—IR和XPS对改性前后的氧化锌粉体进行结构表征．结果表明：硬脂酸分子化学键合在氧化锌表面．改性前后氧化锌的晶体结构相同,其颗粒的团聚性降低,二次粒径明显减小．通过测定改性样品的活化指数和亲油化度,选择最佳的改性剂用量为氧化锌质量的10％,氧化锌表面亲油疏水,在有机溶剂中有较好的分散性．     

Synthesis of polytetrafluoroethylene/polyacrylate core-shell nanoparticles via emulsifier-free seeded emulsion polymerization

Polytetrafluoroethylene (PTFE)/polyacrylate core-shell nanoparticles were produced via the emulsifier-free seeded emulsion polymerization of acrylate monomers with PTFE latex as seed. The monomer conversions under different synthesis parameters were monitored by a gravimetric method. The polymerization conditions for preparing PTFE/polyacrylate core-shell nanoparticles were surveyed and optimized. The chemical component of the PTFE/polyacrylate particles was confirmed by comparing the Fourier-transform infrared spectra of PTFE and PTFE/polyacrylate particles. The core-shell structure of the resulting PTFE/polyacrylate nanocomposite particles was investigated by transmission electron microscopy. The water contact angles of the films prepared from PTFE/polyacrylate nanocomposite particles showed that the films were hydrophilic, which confirmed that polyacrylate covered the surface of the PTFE particles. This kind of PTFE/polyacrylate core-shell nanoparticles might advance the compatibility of PTFE with other materials due to the covering of the polyacrylate shell on the surface of PTFE, which would make them promising in various fields.     

Controlled formation of gold nanoparticle dimers using multivalent thiol ligands

Approaches for the controlled formation of gold nanoparticle dimers are investigated. These are based on a locally confined surface modification of gold nanoparticles followed by bridging two particles with an organic linker. A key factor in these approaches is the use of multivalent ligands. Citrate-stabilized gold nanoparticles are immobilized on a glass surface and mono- and multivalent thiol ligands are investigated regarding their ability to inactivate the nanoparticles sites facing away from the glass. A successful locally confined functionalization is only possible if multivalent ligands are used in this step. The application of monovalent ligands results in less stable particles without a permanent regioselective functionalization. This result can be explained by the dynamic equilibrium between bound and free ligands. Subsequently, the sites of the nanoparticles previously bound to the glass surface are functionalized with thiol ligands additionally bearing a reactive group. Approaches using dithiol linkers, diamine linkers, and coupling complementary functionalized particles are investigated. The highest yield of stable dimers is obtained from conditions where nanoparticles which are regioselectively functionalized with an N-hydroxysuccinimide ester are reacted with complementary amino-functionalized particles. The application of nanoparticles with activated carboxyl groups is essential since standard carboxyl activation agents induce an aggregation of the nanoparticles due to a reaction with remaining citrate molecules on the nanoparticle surface which reduces significantly electrostatic stabilization. This versatile approach using complementary regioselective with multivalent ligands functionalized nanoparticles may be also used for the coupling of particles with different size, shape, or composition, as well as a control of the interparticle distance.     

Ultrastable Au nanocatalyst supported on surface-modified TiO2 nanocrystals

The surfaces of TiO2 nanocrystals were modified with amorphous aluminum-oxide layers using a surface sol-gel process to control the interaction between supports and metal particles. Ultrastable Au nanocatalysts were prepared by the deposition of Au nanoparticles on the surface-modified TiO2 nanocrystals using a deposition-precipitation (DP) method. The TEM analysis showed that the Au nanoparticles on the surface-modified nanocrystal supports were highly stable with a sinter-resistant capability during high-temperature calcination. The HRTEM analysis revealed that the surface of the TiO2 nanocrystals was covered by an amorphous aluminum-oxide layer and the Au nanoparticles were primarily anchored to this amorphous layer. This amorphous aluminum-oxide layer played an extremely important role in the stabilization of the supported Au nanoparticles without affecting catalytic activities. The surface modification of nanocrystal supports highlights new opportunities in tailoring the stability and activity of supported nanocatalyst systems.     

W/O型微乳法制备淀粉基纳米粒

在正己烷、Span-60和NaOH水溶液的W／O型淀粉微乳液中,进行淀粉与环氧氯丙烷交联反应制备淀粉微球,用质量分数为1％的淀粉水浆液制备出微球的流体力学半径Rb为7．08—113nm,其中粒径不超过100nm的纳米粒在整个微粒体系中占69％,平均粒径为92．2nm。TEM和DLS结果表明,制得的微粒呈圆球形,且微粒的流体力学半径随淀粉水浆液浓度的增加而增大并分布变宽,淀粉水浆液的浓度低有利于淀粉基纳米粒的形成。     

Fabrication of magnetically separable mesostructured silica with an open pore system

Magnetically separable mesostructured silica with an unobstructed pore system was fabricated through the deposition of cobalt nanoparticles on the outer surface of the submicron-sized silica particles. These cobalt nanoparticles were further protected by a nanometer-thick carbon shell against acid erosion. Due to the fact that the magnetic particles are grafted on the outer surface of the porous silica, the pores are still accessible for further modification, which could widen the application range of porous silica.     

Polymerization Compounding on the Surface of Zirconia Nanoparticles

Zirconia nanoparticles were encapsulated by polyethylene via a polymerization compounding method using a Ziegler-Natta catalyst. The chemical reaction was carried out in an organic solvent under moderate pressure of ethylene monomer. Transmission electron microscopy (TEM) indicated the presence of a thin layer of polymer, about 6 nm, uniformly applied around the particles. However, the thickness of coating layer can be controlled as a function of time and operating conditions of the process. The morphology study using scanning electron microscopy (SEM) as well as TEM revealed that although the nanoparticles seem to be coated individually, some agglomerates, encapsulated by a polymer film, could be observed. The grafting of the catalyst to the original surface of particles was further confirmed by X-ray photoelectron spectroscopy (XPS).     

Covalent Assembly of Hierarchical Particles by Efficient Coupling of β‐Diketones and Benzyl Chloride

A coupling reaction is performed between polymeric nanoparticles and microparticles via the nucleophilic substitution of pendent β‐diketone groups with benzyl chloride. The coupling reaction results in the formation of hierarchical particles, through the nanoparticles being covalently linked onto the microparticles. The coupling reaction is tracked by TEM and SEM, and the formation of covalent C–C bonds through the coupling reaction between the polymeric nanoparticles and microparticles is confirmed by solid‐state ¹³C CP‐MAS NMR spectroscopy and XPS. The proposed coupling reaction between the nanoparticles and the microparticles is believed to be a promising strategy in particle‐surface modification.     

Preparation and electrorheological characteristic of CdS/Polystyrene composite particles

Cadmium sulfide/polystyrene (CdS/PS) hybrid particles were synthesized and their physical characteristics including electrorheology were examined. Monodisperse CdS/PS nanocomposite particles with diameters of 2 μm were obtained via dispersion polymerization. To form cadmium sulfide nanoparticles onto the PS surface, 2-(dimethylamino)ethyl methacrylate was used as a functional monomer for coordinating with Cd²⁺ ions. Finally, cadmium sulfide nanoparticles with size < 10 nm were formed with the release of S²⁻ ions from thioacetamide. The morphology of the as-prepared CdS/PS nanocomposite particles clearly showed that the CdS particles are present on the surface of the PS. The optical properties were also studied. In addition, their electrorheological characteristics were confirmed by using optical microscopy with applied electrical field. Recently, dielectric properties of CdS nanoparticles were already reported; however, electrorheological characteristics of CdS/PS nanocomposite particles were investigated for the first time.