热致液晶性聚合物——含单取代苯环和扭曲成分的全芳香族共聚酯

本文报道了由氯代对苯二酚/甲基代对苯二酚和对苯二甲酸以及二种能导致分子链扭曲和弯折的成分——4,4′-二羟基二苯醚和间苯二甲等合成的全芳香族共聚酯。一定组成范围的四元共聚酯具有低熔点,宽液晶相区,易成纤的特点。重点讨论了分子组成-转变行为-液晶性和成纤性的关系,并对液晶相的形态结构进行了表征。     

Effect of Polycondensation Reaction Conditions on the Properties of Thermotropic Liquid‐Crystalline Copolyester

In this study a range of wholly aromatic copolyesters based on kink m‐acetoxybenzoic acid (m‐ABA) monomer (33 mol%) and equimolar‐linear p‐acetoxybenzoic acid (p‐ABA), hydroquinone diacetate (HQDA) and terephthalic acid (TPA) monomers (67 mol%) have been synthesized by melt polycondensation reaction process at 280°C and 260°C for different time intervals. Characterization of copolyesters were performed by solution viscosity measurement, wide–angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), hot‐stage polarized light microscopy, proton‐nuclear magnetic resonance analysis (¹H‐NMR). According to the results obtained, copolyesters showed thermotropic liquid crystalline behavior in an appropriate temperature range. The copolyesters were prepared in high yields. It was observed that the intrinsic viscosities of the copolyesters are increased regularly with increasing polymerization time and temperature. All the copolyesters were soluble in a trifluoroacetic acid/dichloromethane (30:70 v/v) except the copolyesters which were synthesized at 280°C in 5 h. According to the WAXD results; the degree of crystallinity of copolyesters were found to be between 5–15%. DSC and hot stage polarized light microscopy results showed that all the copolyesters are melt processable and a significant molecular interaction exist in a very broad temperature range (160°C and 165°C) in the nematic mesophase. The T_g values are increased with an increasing polycondensation reaction time and temperature and they were observed between 93–126°C. Fibers prepared by a hand‐spinning technique from the polymer melt exhibit well‐developed fibrillar structure parallel to the fiber axis.     

Synthesis and properties of novel photocrosslinkable aromatic-aliphatic liquid crystal copolyesters based on poly(ethylene glycol) and cinnamic acid

Firstly, PEGn-TA monomers with carboxyl functional groups were synthesised by terephthalic acid (TA) and poly(ethylene glycol) (PEG) with molecular weight of 200, 400 and 600. Then, photocrosslinkable thermotropic liquid crystal copolyesters derived from PEGn-TA, 4,4?-biphenol, 4-hydroxy-cinnamic acid and 4-hydroxy-benzoic acid were successfully obtained by Vilsmeier adduct solution polymerisation method. Influence of PEG molecular weight on thermal behaviour, liquid crystal mesophase, hydrophilicity, structure and photoactivity were investigated by various measurements. Experimental results indicated that all copolyesters showed nematic mesophase textures, relative low melting temperatures, and two glass transitions as well as better hydrophilicity were observed for those contained higher PEG molecular weight. Photocrosslinking rate was increased first and then decreased due to effect of flexible PEG moieties. The resulted copolyesters with liquid crystal behaviour, excellent hydrophilicity and photoactivity could be potentially used as biomaterial.     

Evolution of the structure of mesophase polyfluoroalk-oxyphosphazenes and liquid crystalline copolyesters

Comparative analysis of the temperature evolution of the structure of linear organoelement polyfluoroalkoxyphosphazenes and wholly aromatic main-chain copolyesters was carried out using X-ray analysis, differential scanning calorimetry and dynamic mechanical testing within a wide temperature range. Experimental observations show that flexible-chain polyfluoroalkoxyphosphazenes are inclined to formation of the columnar mesophase and condis crystalline structures, while rigid-chain random copolyesters mainly exhibit peculiar smectic and nematic liquid crystalline states.     

Direct synthesis of potentially biodegradable aromatic–aliphatic thermotropic copolyesters with photocrosslinking properties

ABSTRACT

In this study, aromatic–aliphatic thermotropic copolyesters derived from p-hydroxybenzoic acid, p-hydroxycinnamic acid (HCA), terephthalic acid and polyethylene glycol (PEG) with different molecular weight (200, 400, 600) were directly synthesised via Vilsmeier adduct solution polymerisation method. The structure, thermal behaviour, liquid crystal property, hydrophylicity and photoactivity were investigated by Fourier transform infrared and nuclear magnetic resonance spectroscopy, differential scanning calorimeter, polarised optical microscopy, water contact angle measurement and ultraviolet (UV) spectrophotometer. The PEG incorporation ratio is 0.540–0.691 related to the HCA units, because of its low reactivity. And, the copolyesters have relatively low melting temperatures (96–107°C) and good hydrophylicity (water contact angle value 61.2–75.3°) as compared with wholly aromatic thermotropic copolyester. All of the copolyesters exhibited nematic liquid crystal behaviour and the stable mesophase temperature range was more than 60°C after being melted. The resulted copolyesters had enough thermal stability for melt processing without any degradation. The UV absorption intensities decreased with increased irradiation time, indicating that photocrosslinking occurred.     

Copolyesters exhibiting a thermotropic cholesteric phase

Mesomorphic copolymers were synthesized by incorporating varying ratios of azelaic acid and (+)-3-methyl adipic acid into copolyesters based upon 4,4′-dihydroxybiphenyl. Introduction of the phenylene (+)-3-methyl adipate unit broadens the temperature range of the nematic phase of the azelate homopolymer and, at the same time, produces a chiral nematic (cholesteric) mesophase which exhibits various iridescent colors. Circular dichroism measurements were used to determine the pitch of the cholesteric liquid crystals. The pitch decreased gradually with increasing temperature, and the inverse pitch increased in direct proportion to the molar content of the units containing (+)-3-methyl adipate. The twisted cholesteric structure could be conserved by quenching to produce films with various colors at room temperature. Annealing these films at a temperature immediately below that of the crystal–mesophase transition improved the regularity of the cholesteric structure.     

Study of a thermotropic liquid-crystalline polyester at elevated pressures

A thermotropic liquid-crystalline copolyester of 20% hydroxybenzoic acid, 40% isophthalic acid, and 40% hydroquinone polymer was studied at elevated pressures. The characterization techniques at elevated pressures (0–1000 bar) included high-pressure differential thermal analysis and dilatometry; at atmospheric pressure, differential scanning calorimetry, thermal optical analysis, and x-ray analysis were employed. The mechanical properties of the solid specimens prepared at different pressures were studied by compression and dynamic rotation mechanical testing techniques. High-pressure induced a new crystal habit in the solid state and a new mesophase in the melt. These transitions are summarized in a proposed phase diagram. Mechanical tests on the material produced at elevated pressure indicate the possibility of improved properties, implying that the pressure-dependent morphological changes in thermotropic copolyesters could be of practical significance. The finding of a pressure-induced mesophase also confirmed the possibility of extending the range of polymers which might exhibit liquid crystallinity via the application of pressure.     

全芳香族共聚酯的结构和其液晶行为研究

本文对不同组成的对苯二甲酸(TPA),对羟基苯甲酸(PHBA),联苯二酚(BP),间苯二甲酸(IPA)共聚酯采用热台偏光显微镜、电子显微镜、X-射线衍射、激光小角散射、差热等技术进行了研究.实验结果表明,在一定的组成范围内共聚酯熔体有很好的液晶性.重点讨论了分子组成、转变行为、液晶性的关系,并对液晶相的形态结构进行了表征.     

Thermotropic liquid crystalline polymers with low thermal transitions. II. Low melting thermotropic liquid crystalline homo- and co-polyesters

Thermotropic liquid crystalline (TLC) polymers with low melt transitions are useful for imaging technologies. This is the first report describing thermotropic liquid crystalline copolyesters of low melt transitions comprised of a mesogen with up to three different spacer moieties. We have noted that the smectic mesophase range decreased with increasing amounts of different spacer moieties, without altering the isotropic transition and thereby leading to a broader nematic range. © 1995 John Wiley & Sons, Inc.     

Thermotropic copolyesters having ordered comonomer sequences and flexible spacers

A series of new copolyesters having ordered comonomer sequences were synthesized via multistep routes and their properties such as glass transition (T_g) and melting temperatures (T_m), crystallization tendency, and mesomorphic properties were compared with those of the corresponding random copolyesters. All of the present copolyesters contain 1,8-octamethylene or 1,10-decamethylene spacers and hydroquinone (HQ) and terephthalic acid (TPA) moieties. In general, both melting and clearing temperatures of the ordered sequence copolyesters were much higher than those of the random counterparts. Crystallization tendency, however, was comparable. All of the present copolyesters are thermotropic and form nematic phase in melts. © 1993 John Wiley & Sons, Inc.     

SYNTHESIS OF MAIN CHAIN LIQUID CRYSTALLINE COPOLYESTERS WITH X-SHAPED TWO-DIMENSIONAL MESOGENIC UNIT AND CROWN ETHER CYCLE

A novel series of main chain liquid crystalline copolyesters with X-shaped two-dimensional mesogenic unit and crown ether cycle of cis-4,4′-bis(4-hydroxyphenylazo) dibenzo-18-crown-6 was prepared via solution condensation polymerization from 4,4′-(α,ω-hexanedioyloxy) dibenzoyl dichloride (M1), 2,5-bis(p-octyloxybenzoyloxy) hydro-quinone (M2) and cis-4,4′-bis(4-hydroxyphenylazo) dibenzo-18-crown-6 (M3). Monomer M1 was synthesized by esterification and substitution of adipoyl chloride with p-hydroxybenzoic acid, monomer M2 was synthesized by esterfication and reduction reaction of 2,5-dihydroxybenzoquinone and p-octanoxybenzoyl chloride and monomer M3 was synthesized by diazotization and coupling reaction of cis-diaminodibenzo-18-crown-6 with phenol. The molecular weights of copolyesters are not high,and the intrinsic viscosity [η] of copolyesters ranges from 0.25-0.35. The monomers' structures were identified by using elemental analysis, IR, UV, 1H-NMR, MS, etc. All the copolyesters are yellowish powders and insoluble in THF and CHCl3 at room temperature except CP9. The properties of copolyesters were investigated by using GPC, [η] , DSC, TG,WAXD and POM. It was found that all the copolyesters entered into liquid crystal phase when they were heated to above their melting temperature (Tm). The typical smectic and nematic phase texture can be observed on POM. Their mesophase transition temperature and thermal stability change regularly with varying the content of cis-4,4′-bis(4-hydroxyphenylazo)dibenzo-18-crown-6 unit in the copolyesters.     

热致液晶性聚合物——含萘环主成分为对羟基苯甲酸的全芳香族共聚酯

由对乙酰氧基苯甲酸、对苯二酚二乙酯、2,6-萘二甲酸及间苯二甲酸四种单体通过熔融缩聚反应,合成了全芳香族四组分共聚酯。在一定的组成范围内,共聚酯熔体有很好的液晶性。本文重点讨论了聚合物的组成与性质的关系,热谱特征和液晶相行为。     

Thermotropic aromatic copolyesters of catechol

Three new series of thermotropic aromatic main-chain polymers were synthesized and studied by differential scanning calorimetry and hot-stage polarized microscopy. The polymers were random copolyesters of p-hydroxybenzoic acid (from 60 to 10 mol %), catechol (from 20 to 45 mol %), and one of the following dicarboxylic diacids: terephthalic acid (series 1 ), 2,6-naphtalenedicarboxylic acid (series 2 ), and 1,2-bis-p-carboxyphenoxy ethane (series 3 ). Copolyesters with more than 25 mol % catechol in their structures were soluble in common organic solvents such as chloroform. All the synthesized copolyesters showed hysteresis of the heat capacity at the mesophase glass transition region and nematic mesophases above their T_g's which were stable over very broad ranges of temperature. Copolyesters containing the 2,6-naphtylenedioyl group showed the most stable nematic phases due to the increased anisometry of the 2,6-naphtylenedioyl unit compared to that of the therephthaloyl or the 4-oxybenzoyl units. © 1992 John Wiley & Sons, Inc.     

含二苯并-18-冠-6冠醚环的主链型液晶共聚酯的设计与合成(英文)

以4,4′-(α,ω-亚烷基二酰氧)二联苯甲酰氯(M1)、顺式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6(M2)、反式-4,4′-双(4-羟基苯基偶氮)二苯并-18-冠-6(M3)和1,10-癸二醇(M4)为单体,通过溶液共缩聚反应,合成了两个系列新的含联苯型液晶基元和偶氮型冠醚环的主链型液晶共聚酯.共聚酯的[η]在0·25～0·35和0·27～0·38之间.单体的化学结构通过IR、UV-Vis、1H-NMR、MS和元素分析等方法确证.共聚酯的性质采用[η]、DSC、TGA、WAXD和POM等方法进行了研究.发现所有的共聚酯加热到各自熔融温度以上都能形成向列相液晶态,可以观察到向列相的丝状织构或纹影织构或球粒织构.共聚酯的熔融温度(Tm)和各向同性温度(Ti)随共聚酯分子中柔性间隔基长度的增加而有规律地降低,含反式冠醚环的共聚酯的Tm和Ti均高于相应含顺式冠醚环的共聚酯的Tm和Ti.     

Effect of pyridazine structure on thin‐film polymerization and phase behavior of thermotropic liquid crystalline copolyesters

An intensive study has been conducted to compare the effects of malei hydrazine (MH) and hydroquinone (HQ) on the liquid crystallinity and phase transition behavior in the ABA/HQ/TFTA and ABA/MH/TFTA copolyesters (p‐acetoxybenzoic acid (ABA) and tetrafluoroterephthalic acid (TFTA)). These two copolyesters were prepared by thin‐film polymerization and characterized by differential scanning calorimetry (DSC), polarizing light microscope (PLM), wide‐angle X‐ray diffraction (WAXD), as well as Cerius² computational simulation. Characterization and comparison of the liquid crystalline (LC) evolution and morphology changes of HQ moiety with corresponding MH moiety suggest that ABA/MH/TFTA system is energetically favorable to mesophase formation than ABA/HQ/TFTA system. When the films are quenched, a surface microcrack decoration is observed in both systems. Both systems, which have the persistence ratio larger than 6.42, satisfy the minimum requirement for the LC formation by molecular science software. The ABA/MH/TFTA film exhibits only one single peak transition. However, two distinct transitions have been observed in the ABA/HQ/TFTA system. The average Avrami exponent, n, is ～1.2, and PLM and WAXD results suggest mesophase transition in ABA/MH/TFTA film. As reflected by the results obtained from PLM, WAXD, and DSC studies, the phase transition is confirmed as crystal → nematic → isotropic in ABA/HQ/TFTA copolyester. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2230–2242, 2005     

Mesogenic random copolymers. II. Copolymers with one flexible and two rigid segments

We have investigated copolyesters based on a single aliphatic dibasic acid flexible segment and two rigid segments arising from 4,4′-dihydroxybiphenyl (PB) and 2,6-dihydroxynaphthalene (PN). Homopolyesters based on the latter rigid segment exhibit no enantiotropic mesophase for 5 ≤ n ≤ 8. The copolymers are designated PBN-n where n is the number of methylene units in the dibasic acid. From the temperature–composition phase diagram, the odd-membered PBN-5 and PBN-7 exhibit only a nematic phase. The temperature range of the nematic phase decreases progressively with increasing mole fraction of naphthalene units. The even-membered PBN-6 and PBN-8 exhibit a smectic S_H mesophase and a newly induced nematic phase. Comparison with a previous study of copolymers involving a single rigid segment and two flexible segments reveals that the smectic S_H phase is more easily disrupted, and converted to a less ordered nematic phase, by different rigid segments than by different flexible segments. The isotropization entropy of a series of nematogenic equimolar copolymers exhibits a marked odd–even effect, with the observed ΔS_NI values being quite large for the even-membered copolymers.     

Structure and temperature behavior of thermotropic liquid-crystalline Ultrax copolyesters

Phase and relaxational transitions in the commercial thermotropic liquid-crystalline copolyesters Ultrax 4002 and Ultrax 4003 were studied by X-ray diffraction, differential scanning calorimetry, and mechanical analysis. In spite of only a slight difference in the compositions of the copolyesters, considerable differences in their structure and temperature behavior were observed. In particular, it was shown that the degree of crystallinity differs by more than a factor of 2 for the as-spun fibers upon annealing above the glass-transition temperature. The type of crystalline structure as well as the ability to crystallize are also different. The glass-transition temperature of both copolyesters is determined as the temperature of the appearance of mobility of the most rigid comonomer units and does not depend on the composition of the materials. Annealed copolyesters are semicrystalline materials with a two-phase structure, where the crystalline phase coexists with a liquid-crystalline one. The structure of the latter is characterized by aperiodic positions of smecticlike layers in space. On heating the materials the crystalline phase is transformed into a pseudohexagonal mesophase indicating features of a second-order phase transition. Received: 20 July 1999 Accepted: 20 August 2000     

Diamagnetic susceptibility of liquid crystalline copolyesters: Study of molecular relaxation

The diamagnetic susceptibility of a series of random copolyesters, P(HB/HN), of 4-hydroxybenzoic acid (HBA) with 2-hydroxy-6-naphtoic acid (HNA) has been investigated, both, as a function of composition and temperature. It is shown that the molecular susceptibility of the uniaxially oriented samples linearly decreases with HB content. Results are discussed in terms of the increase in magnetic anisotropy occurring with the introduction of the HN groups. Furthermore, the temperature dependence of the specific susceptibility has been investigated. The diamagnetic susceptibility of these copolymers rises at the beginning of the solid-liquid crystalline transition. Above this temperature, the specific susceptibility exhibits a conspicuous time-dependent behavior which is a function of the temperature at the mesophase. After long storage times at the mesophase, and upon cooling at room temperature, the susceptibility shows values which approach those of a macroscopically isotropic state, i.e., a state with no overall preferred orientation. X-ray diffraction measurements confirm a relaxation mechanism of the molecular orientation occurring at temperatures above the melting point. A similar relaxation process is observed for samples with an initial planar orientation. © 1996 John Wiley & Sons, Inc.     

Thermotropic copolyesters of 4-hydroxybenzoic acid

Copolyesters of 4-hydroxybenzoic acid were prepared by thermal polycondensation of 4-acetoxybenzoic acid with various acetylated comonomers, such as 4-mercaptobenzoic acid, 3-hydroxybenzoic acid, N-(4-carboxyphenyl)4-hydroxyphthalimide or hydroquinone in combination with 1,12-dodecane bistrimellitimide. The copolyesters were characterized by elemental analyses, inherent viscosities, ¹H- or ¹³C NMR spectroscopy, DSC-measurements, WAXS-measurements at temperatures between 25 and 425°C, microscopic observation, thermomechanical and thermogravimetrical analyses. Copolyesters containing 4-mercaptobenzoic acid or N-(4-carboxyphenyl)4-hydroxyphthalimide possess a reversible first order phase transition which represent a change of modifications and not a melting process. Both classes of copolyesters adopt the same kind of high temperature modification as poly(4-hydroxybenzoate), namely a pseudo-hexagonal chain packing. In contrast, copolyesters of 3-hydroxybenzoic acid or copoly(ester imide)s with aliphatic spacer containing more than 50% 4-hydroxybenzoic acid form a nematic phase over a broad temperature range. However, in the case of copolyesters derived from 3- and 4-hydroxybenzoic acid the homogeneous nematic melt is thermodynamically unstable and gradually turns into a heterogeneous more or less crystalline material with blocks of 4-hydroxybenzoate units.     

基于环己烷二甲醇和低聚乳酸制备脂肪/芳香共聚酯

通过对苯二甲酸二甲酯(DMT),1,6-己二醇(HDO),以及1,4-环己烷二甲醇(CHDM)和-羟基--羧基DL-低聚乳酸(OLA)在催化剂钛酸四丁酯下熔融缩聚合成了一系列可生物降解共聚酯PHCTL。通过核磁共振(1H NMR),差示扫描量热法(DSC),热重分析法(TG)和广角X射线衍射(WAXS)技术对共聚酯进行了表征,随着CHDM含量的增加,共聚酯的熔点(Tm),热分解温度(Td)等都有了明显的增加。凝胶渗透色谱(GPC)分析得出共聚酯的分子量在1.7-3.6  x104之间。在37 C下 PHCTL共聚酯发生了明显的降解,降解速率的大小与共聚酯的亲水性有关。