Multiresidue determination of fluoroquinolones in milk by column liquid chromatography with fluorescence and ultraviolet absorbance detection

Column liquid chromatography with fluorescence (FLD) and UV-diode array detection (UV-DAD) was used for the simultaneous determination of ciprofloxacin (CIPRO), enrofloxacin (ENRO), marbofloxacin (MARBO), danofloxacin (DANO) and sarafloxacin (SARA) residues in milk, using norfloxacin (NOR) as internal standard. Two solid-phase extraction (SPE) cartridges, were evaluated for sample clean-up and preconcentration, Strata X, based on a modified styrene-divinylbenzene polymer, and Strata Screen A, a mixed anion exchanger/C8 reversed-phase sorbent. The fluoroquinolones (FQs) were separated on a polar endcapped column (AQUA C18). The recoveries for raw milk spiked with the antibiotics at three concentrations close to the maximum residue limit (MRL), were 80-103% for ENRO, CIPRO and DANO, with relative standard deviations (R.S.D.) lower than 6.6%. SARA recoveries were 70% (R.S.D. = 7%) and values in the order of 95% (R.S.D. = 1.5%) were obtained for MARBO at the MRL level. The quantification limits ranged from 2.4 to l0 ng ml(-1) and are below the MRL established for these drugs by the European Union. The method was successfully applied to the analysis of ENRO and its metabolite CIPRO in an incurred milk sample.     

Immunoaffinity column cleanup with liquid chromatography for determination of aflatoxin B1 in corn samples: interlaboratory study

An interlaboratory study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for the determination of aflatoxin B1 levels in corn samples, enforced by European Union legislation. A test portion was extracted with methanol-water (80 + 20); the extract was filtered, diluted with phosphate-buffered saline solution, filtered on a microfiber glass filter, and applied to an immunoaffinity column. The column was washed with deionized water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase LC with fluorescence detection after either pre- or postcolumn derivatization. Precolumn derivatization was achieved by generating the trifluoroacetic acid derivative, used by 8 laboratories. The postcolumn derivatization was achieved either with pyridinium hydrobromide perbromide, used by 16 laboratories, or with an electrochemical cell by the addition of bromide to the mobile phase, used by 5 laboratories. The derivatization techniques used were not significantly different when compared by the Student's t-test; the method was statistically evaluated for all the laboratories. Five corn sample materials, both spiked and naturally contaminated, were sent to 29 laboratories (22 Italian and 7 European). Test portions were spiked with aflatoxin B1 at levels of 2.00 and 5.00 ng/g. The mean values for recovery were 82% for the low level and 84% for the high contamination level. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the values for relative standard deviation for repeatability (RSDr) ranged from 9.9 to 28.7%. The values for relative standard deviation for reproducibility (RSDR) ranged from 18.6 to 36.8%. The method demonstrated acceptable within- and between-laboratory precision for this matrix, as evidenced by the HorRat values.     

Quantitative determination of imatinib in human plasma with high-performance liquid chromatography and ultraviolet detection

A simple and sensitive high-performance liquid chromatography (HPLC) method was developed to quantitate imatinib in human plasma. Imatinib and the internal standard dasatinib were separated using a mobile phase of 0.5% KH(2)PO(4) (pH3.5)-acetonitrile-methanol (55:25:20, v/v/v) on a CAPCELL PAK C18 MG II column (250 mm × 4.6 mm) at a flow rate of 0.5 mL/min and measurement at UV 265 nm. Analysis required 100 μL of plasma and involved a solid phase extraction with an Oasis HLB cartridge, which gave recoveries of imatinib from 73% to 76%. The lower limit of quantification for imatinib was 10 ng/mL. The linear range of this assay was between 10 and 5000 ng/mL (regression line r(2) > 0.9992). Inter- and intra-day coefficients of variation were less than 11.9% and accuracies were within 8.3% over the linear range. The plasma concentrations of imatinib obtained by our present method were almost the same as those assayed by an LC-MS-MS method at the Toray Research Center, Inc. This method can be applied effectively to measure imatinib concentrations in clinical samples.     

Determination of zopiclone in plasma using column liquid chromatography with ultraviolet detection.

A reversed-phase liquid chromatographic method with ultraviolet detection for the determination of zopiclone in plasma is described. It is rapid, sensitive, reproducible and linear over a wide range. The method was used to study plasma zopiclone concentrations in a case of acute intoxication after oral ingestion of 300 mg of the drug. The plasma level was 1600 ng/ml 4.5 h after the dose and the elimination half-life was 3.5 h.     

Quantitative determination of benzalkonium chloride in treated wood by solid-phase extraction followed by liquid chromatography with ultraviolet detection

Ammoniacal copper quat (ACQ) compound wood preservative is comprised of copper and quaternary ammonium compounds with benzalkonium chloride (BAC) as the active ingredient. Solid-phase extraction (SPE) followed by liquid chromatography with ultraviolet detection (LC-UV) was developed for quantitative determination of BAC in treated wood. Five species of wood were used, Japanese cedar (Cryptomeria japonica), Japanese larch (Larix leptolepis), Yezo spruce (Picea jezoensis), Sakhalin fir (Abies sachalinensis), and western hemlock (Tsuga heterophylla). BAC used in the present study was composed of 66% C12, 33% C14 and less than 1% C16. BAC was added to each wood species (500 mg) then extracted with HCl-ethanol (20 ml) and quantitatively determined with LC-UV (262 nm). Wood extractives from the heartwood of each species, except western hemlock, interfered with quantitative determination of BAC, but SPE with an Oasis MCX cartridge was effective in preventing this. Using the present methods, BAC homologue peaks were clearly confirmed without interference. Recoveries from wood ranged from 92 to 101% and the limit of quantitation was approximately 240 microg/g wood for the C12 and C14 homologues.     

Micellar liquid chromatography determination of B vitamins with direct injection and ultraviolet absorbance detection

A micellar reversed-phase liquid chromatographic procedure was developed for the control of five water-soluble vitamins, B (nicotinamide), B1 (thiamine), B2 (riboflavin), B6 (pyridoxine and pyridoxamine), in multivitamin pharmaceutical formulations (capsules, pills and syrups). Optimization procedure includes studies about the composition of the mobile phase (sodium dodecyl sulphate and the modifiers propanol, butanol or pentanol), flow-rate and temperature. Chromatographic analysis of all vitamins was carried out using a single mobile phase of 0.1 M SDS-4% (v/v) pentanol at pH 3, in a C18 column in isocratic mode, and UV-detection at 270, 290 and 325 nm. The flow-rates selected were 1.0 ml/min in the interval 0 to 6 min, and 2.0 ml/min until the end of the chromatogram and temperature was 45 degrees C. In the micellar liquid chromatographic system, the samples were injected without pretreatment, and the analysis time was below 12 min. Repeatabilities and intermediate precision were achieved according to ICH, and were below 5%. When the method is applied to real samples, the amount found with respect to the declared compositions were within the 91-105% range. These results were similar to those obtained with a conventional 60:40 (v/v) methanol-water mixture for some of the vitamins, but with the advantage of use a single mobile phase for the analyses of the five vitamins, with direct injection of the samples and reduced toxicity, flammability, environmental impact and cost of the micellar-pentanol solutions.     

Immunoaffinity column cleanup with liquid chromatography for determination of aflatoxin M1 in liquid milk: collaborative study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatographic method for determination of aflatoxin M1 in milk at proposed European regulatory limits. The test portion of liquid milk was centrifuged, filtered, and applied to an immunoaffinity column. The column was washed with water, and aflatoxin was eluted with pure acetonitrile. Aflatoxin M1 was separated by reversed-phase liquid chromatography (LC) with fluorescence detection. Frozen liquid milk samples both naturally contaminated with aflatoxin M1 and blank samples for spiking, were sent to 12 collaborators in 12 different European countries. Test portions of samples were spiked at 0.05 ng aflatoxin M1 per mL. After removal of 2 noncompliant sets of results, the mean recovery of aflatoxin M1 was 74%. Based on results for spiked samples (blind pairs at 1 level) and naturally contaminated samples (blind pairs at 3 levels) the relative standard deviation for repeatability (RSDr) ranged from 8 to 18%. The relative standard deviation for reproducibility (RSDR) ranged from 21 to 31%. The method showed acceptable within- and between-laboratory precision data for liquid milk, as evidenced by HORRAT values at the low level of aflatoxin M1 contamination.     

Determination of naphazoline in rat plasma using column liquid chromatography with ultraviolet detection.

A sensitive (1 ng/mL) and rapid method for the determination of naphazoline in rat plasma is described. Following extraction, the compound is analysed by reversed phase high performance liquid chromatography and ultraviolet detection at 214 nm.     

Simultaneous determination of serum cortisol and cortisone by reversed-phase liquid chromatography with ultraviolet detection.

A rapid high-performance liquid chromatographic (HPLC) method for the simultaneous determination of cortisol and cortisone in a single extract of 1 ml of serum is described. The method employs meprednisone as the internal standard. The steroids were analysed isocratically by reversed-phase HPLC with an octadecylsilane-bonded (ODS) column using ultraviolet detection. The matrix effect was reduced by lowering the sample pH by adding glacial acetic acid to the sera. The samples were then filtered through regenerated cellulose membranes at 4 degrees C and extracted with diethyl ether. The dried eluates were redissolved in the mobile phase and injected into the column. The detection limit of the assay for both steroids was 500 ng/l. Cortisol was determined in twenty serum samples by both HPLC and radioimmunoassay (RIA). The results were similar. Interference by other steroids and certain steroid analogue drugs was also studied. The HPLC method yielded no cross-reactivity between the different steroids as may occur with the RIA technique. The HPLC method was technically easy to perform and it allowed us to quantify both cortisol and cortisone in a single serum extract with high specificity.     

Immunoaffinity column cleanup with liquid chromatography using post-column bromination for determination of aflatoxin B1 in cattle feed: collaborative study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for determination of aflatoxin B1 in cattle feed at a possible future European regulatory limit (1 ng/g). The test portion was extracted with acetone-water (85 + 15), filtered, diluted with water, and applied to an immunoaffinity column. The column was washed with water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase liquid chromatography (RP-LC) and detected by fluorescence after post column derivatization (PCD) involving bromination. PCD was achieved with either pyridinium hydrobromide perbromide (PBPB), used by 14 laboratories, or an electrochemical cell and addition of bromide to the mobile phase, used by 7 laboratories. Both derivatization techniques were not significantly different when compared by the t-test; the method was statistically evaluated for all laboratories together (bromination and PBPB). The cattle feed samples, both spiked and naturally contaminated with aflatoxin B1, were sent to 21 laboratories in 14 different countries (United States, Japan, and Europe). Test portions were spiked at levels of 1.2 and 3.6 ng/g for aflatoxin B1. Recoveries ranged from 74 to 157%. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 5.9 to 8.7%. The relative standard deviation for reproducibility (RSDR) ranged from 17.5 to 19.6%. The method showed acceptable within- and between-laboratory precision for this matrix, as evidenced by HORRAT values, at the target levels of determination for aflatoxin B1. No major differences in RSD were observed, showing that the composition of the feeds was not a factor for the samples tested and that the method was applicable for all materials used.     

Quantitative determination of isoflavones and coumestrol in soybean by column liquid chromatography

Four different stationary phases and a variety of solvents in varying proportions were examined in this study. Daidzein, genistein, formononetin, biochanin A and coumestrol were separated within 24 min on a phenyl column with acetonitrile-water (33:67, v/v) as eluent. The proposed method showed an acceptable repeatability with a RSD of quantitation <6%. The mean recoveries of daidzein, genistein, formononetin, biochanin A and coumestrol from soybean ranged from 89 to 104%. The identity of the individual analytes was confirmed by LC-MS-MS. The four isoflavones and coumestrol were isolated from soybean by hydrolysis with acid and heat. Neutralization of the soybean samples prior to identification did not alter the concentration of daidzein and genistein in soybean.     

Quantitative determination of Closantel residues in milk by high-performance liquid chromatography with fluorescence detection.

A HPLC method with fluorescence detection for quantitative determination of Closantel residues in milk has been developed and validated. The proposed cleaning procedure with acetonitrile and acetone extraction, and solid-phase clean-up with Florisil enables concentrations of Closantel below 50 micrograms/l to be determined. The method was shown to be sufficient, precise, accurate, selective and rugged. The method was applied in the regular monitoring of Closantel residues in milk and of the pharmacokinetic behavior of Closantel in sheep.     

Quantitative analysis of tylosin by column liquid chromatography

A column liquid chromatographic method suitable for the quality control of tylosin A is described. The determination can be carried out on different C₈ or C₁₈ columns, using a mobile phase containing acetonitrile, 0.2 M tetrabutylammonium hydrogensulphate, 0.2 M phosphoric acid and water. The flow-rate is 1 ml/min and detection is performed at 280 nm. The method shows good selectivity towards the major components tylosin A, B, C and D and demycinosyltylosin. Minor degradation products, mainly observed in solutions, are also separated. The compositions of several standards are compared and results for a number of commercial samples are presented.     

Quantitative determination of indapamide in pharmaceuticals and urine by high-performance liquid chromatography with amperometric detection.

A high-performance liquid chromatographic method with amperometric detection for the determination of the diuretic indapamide using a muBondapak C18 column is developed. The mobile phase consists of an acetonitrile-water mixture (45:55, 5 mM) in KH2PO4-K2HPO4 (pH 4.0). The compound is monitored at +1200 mV with an amperometric detector equipped with a glassy carbon working electrode. A liquid-liquid or solid-liquid extraction is performed prior to chromatographic analysis to avoid the interferences found in urine matrix. Percentages of recovery are 88.3 +/- 5.6 and 82.9 +/- 7.8 for liquid-liquid and solid-liquid extraction, respectively. The developed method has a linear concentration range from 25 to 315 ng/mL with a reproducibility in terms of relative standard deviation of 4% for a concentration level of 0.5 microgram/mL and a quantitation limit of 1 ng/mL. The method is applied to the determination of indapamide in tablets and urine obtained from hypertensive patients after the ingestion of Tertensif (indapamide 2.5 mg).     

Simultaneous determination of nitroimidazole residues in honey samples by high-performance liquid chromatography with ultraviolet detection

A rapid and sensitive high-performance liquid chromatography (LC) method was developed for the simultaneous determination of metronidazole (MNZ), dimetridazole (DMZ), ronidazole (RNZ), tinidazole (TNZ), and 2-hydroxymethyl-1-methyl-5-nitroimidazole (HMMNI) in honey. After extraction with ethyl acetate and evaporation, the residue containing the nitroimidazoles was dissolved in ethyl acetate-hexane and subjected to solid-phase extraction cleanup by amine extraction columns. The effluent was evaporated to dryness, and residues were dissolved and determined by LC with an ultraviolet detector set at 315 nm. The limits of detection were 1.0-2.0 ng/g for MNZ, DMZ, RNZ, TNZ, and HMMNI in honey. Average recoveries ranged from 71.5-101.4% in honey fortified at 10, 20, 50, and 100 ng/g. The method was validated for the analysis of real honey samples.     

Simultaneous determination of tiopronin and d-penicillamine in human urine by liquid chromatography with ultraviolet detection

d-Penicillamine and tiopronin are drugs widely used for the treatment of many diseases. Because of the relatively high frequency of side effects to these compounds, some of which are dose-related, drug monitoring in urine samples during treatment is advisable. In this paper, we describe a simple method for the determination of tiopronin and d-penicillamine in human urine. The method was based on derivatization with 2-chloro-1-methylquinolinium tetrafluoroborate followed by ion-pairing reversed-phase liquid chromatography separation and ultraviolet-absorbance detection. 2-S-quinolinium derivatives of thiols were detected at 355 nm. The derivatization was optimized in terms of pH and time of the reaction. Baseline separation was achieved on an analytical Zorbax SB C-18 (5 μm, 150 mm × 4.6 mm) column with a mobile phase consisting of pH 2.0 0.09 mol L⁻¹ trichloroacetic acid buffer (component A) and acetonitrile (component B) pumped at 1.0 mL min⁻¹. Gradient elution was used: 0-4 min, 12% B; 4-8 min, 12-40% B; 8-12 min, 40-12% B. The d-penicillamine and tiopronin standards added to the urine show that the response of the detector is linear within the range studied, from 1 to 200 μmol L⁻¹ urine. The imprecision ranges for tiopronin and d-penicillamine were within 1.61-8.24% and 2.92-10.60%, respectively. The analytical accuracy for determined compounds was from 97.24 to 109.39%. The lower limits of detection and quantitation were 0.5 μmol L⁻¹ and 1.0 μmol L⁻¹ urine, respectively. This method can be used for routine clinical monitoring of the title thiol-drugs. Cysteine can be measured concurrently, if needed.     

Quantitative determination of chlorophenols in leather by pressurized liquid extraction and liquid chromatography with diode-array detection

Pressurized liquid extraction (PLE) with acetonitrile was used for the recovery of chlorophenols (4-chloro-3-methylphenol, 4-chloro-2-methylphenol, 2,4-dichlorophenol, 2-phenylphenol, 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol and pentachlorophenol) present as biocides in leather. After a single cycle PLE treatment, solutions underwent pre-concentration by evaporation of the solvent under vacuum and clean-up treatment with solid-phase extraction cartridges. Quantitative analysis of the target compounds was carried out by liquid chromatography with gradient elution and UV spectrophotometric detection at variable wavelength for the various analytes in the range 190-240 nm. Instrumental detection limits and operative detection limits in the real matrices were determined according to the Hubaux-Vos approach and to the US Environmental Protection Agency procedures. The detection limits for the seven analytes ranged from 10 to 70 microg kg(-1). Linearity was very good in the explored range (10(-7)-10(-5)M) giving R(2) values from 0.995 to 1.000 for pentachlorophenol and 2,4-dichlorophenol, respectively. Repeatability was satisfactory, 2-5% for a 1 x 10(-6)M level of concentration, on five repeated measurements on the sample. Recovery yield values with the proposed procedure were determined using spiked samples. Overall recovery ranged from 88 to 97%. The method was used for routine analysis of real leather samples.     

整体柱离子对色谱-间接紫外检测法快速测定N-甲基,丙基吗啉阳离子

建立了快速分析无紫外吸收的N-甲基,丙基吗啉阳离子的离子对色谱-间接紫外检测法。采用反相C18硅胶整体柱,以背景紫外吸收试剂-离子对试剂-有机溶剂为流动相。研究了背景紫外吸收试剂、检测波长、离子对试剂、有机溶剂、柱温、流速对吗啉阳离子测定的影响。最佳色谱条件为:(0.5 mmol/L对氨基苯酚盐酸盐-0.1 mmol/L庚烷磺酸钠)溶液-甲醇(9:1, v/v)为流动相,检测波长230 nm,柱温30 ℃,流速1.0 mL/min。在此条件下,N-甲基,丙基吗啉阳离子的保留时间为2.966 min,检出限为0.07 mg/L(S/N=3),峰面积的相对标准偏差为2.1%(n=5),保留时间的相对标准偏差为0.02%(n=5)。将此方法用于分析实验室合成的N-甲基,丙基吗啉离子液体,加标回收率为98.8%。结果表明本方法简便、快速。