Molecular imprinting-chemiluminescence determination of trimethoprim using trimethoprim-imprinted polymer as recognition material

A new molecular imprinting-chemiluminescence method for the determination of trimethoprim was developed, in which trimethoprim-imprinted polymer was used as the molecular recognition material and the CL reaction of trimethoprim with potassium permanganate in acidic medium was used as the detection system. The CL intensity responds linearly to the concentration of trimethoprim within the 5.0 x 10(-8)-5.0 x 10(-6) g mL(-1) range (r= 0.9983) with a detection limit of 2 x 10(-8) g mL(-1). The relative standard deviation for the determination of 1.0 x 10(-7) g mL(-1) trimethoprim solutions is 4.8% (n= 9). The method has been applied to the determination of trimethoprim in pharmaceutical preparations and body fluids, and satisfactory results were obtained.     

Spectrofluorimetric determination of anthranilic acid derivatives based on terbium sensitized fluorescence.

Terbium sensitized fluorescence was used to develop a sensitive and simple spectrofluorimetric method for the determination of the anthranilic acid derivatives furosemide and mefenamic and tolfenamic acids. The method makes use of radiative energy transfer from anthranilates to terbium ions in alkaline methanolic solutions. Optimum conditions for the formation of the anthranilate-Tb3+ complexes were investigated. Under optimized conditions, the detection limits are 6 x 10(-9), 1.4 x 10(-8) and 9.0 x 10(-9) mol l-1 for furosemide, mefenamic acids and tolfenamic acid, respectively. The range of application is 2.5 x 10(-8)-5.0 x 10(-5) mol l-1 for all three drugs. The method was successfully applied to the determination of furosemide and mefenamic and tolfenamic acids in serum after extraction of the samples with ethyl acetate, evaporation of the organic layer under a stream of nitrogen at 40 degrees C and reconstitution of the residue with alkaline methanolic terbium solution prior to instrumental measurement. The mean recoveries from serum samples spiked with furosemide (5.0 x 10(-7), 2.0 x 10(-6) and 8.0 x 10(-6) mol l-1), mefenamic acid (3.0 x 10(-6), 9.0 x 10(-6) and 3.0 x 10(-5) mol l-1) and tolfenamic acid (3.1 x 10(-6), 12.5 x 10(-6) and 2.5 x 10(-5) mol l-1) were 96 +/- 8, 101 +/- 5 and 98 +/- 7%, respectively. The within-run precision (RSD) for the method for two serum samples of each drug varied from 2 to 8% and the day-to-day precision for two concentration levels varied from 2 to 13%.     

Molecularly imprinted on-line solid-phase extraction combined with flow-injection chemiluminescence for the determination of tetracycline

A molecularly imprinted polymer solid phase extraction (MISPE) method combined with flow-injection chemiluminescence (FI-CL) for the determination of residual tetracycline (TC) in fish samples is presented. The molecularly imprinted polymer (MIP) of TC was synthesized and particles of this MIP were packed into a polytetrafluoroethylene (PTFE) tube, which was connected into the sampling loop of an eight-way injection valve and served as the MISPE column for on-line selective adsorption of TC. The eluent (CH3CN : HNO3 (0.01 mol L(-1)) = 4 ratio 1, v ratio v) was used for extracting the adsorbed TC, which could be detected by its good enhancing effect on the CL reaction between Ce(iv) and rhodamine B. The CL intensity is linear to TC concentration in the range from 4 x 10(-9) to 4 x 10(-7) g mL(-1). The detection limit is 1 x 10(-9) g mL(-1) (3 sigma) and the relative standard deviation is 2.4% (n = 9). The conditions of preconcentration, extraction and CL reaction were carefully studied. The selectivity experiment shows that the selectivity and sensitivity of the CL method could be improved greatly when MIP was used as a recognition material in SPE. However, the MISPE column interacted indiscriminately with oxytetracycline (OTC) with a 49 +/- 2% binding. An intermediate differential pulsed elution (DPE) step using 3% acetic acid as eluent was employed to remove OTC and other interfering substances. The proposed MISPE-CL method has been applied successfully to the determination of TC in fish samples. At the same time, the binding characteristics of the polymer to tetracycline were evaluated by batch and dynamic methods.     

On-line micellar-enhanced spectrofluorimetric determination of rhodamine dye in cosmetics

A simple FI-fluorimetric analytical methodology for the continuous and sequential determination of rhodamine B (RhB) in cosmetic products has been developed and evaluated in terms of sensibility and selectivity. The influence of several surfactant solutions on RhB fluorescence signal has been studied; particular attention was paid in the aggregation behavior of RhB-SDS system. Linear response has been obtained in the range of 1.6 x 10(-9) and 1 x 10(-6) mol L(-1), with a detection limit of 5 x 10(-10) mol L(-1). The novel technique provides a simple dissolution of sample, on-line filtration with sampling rate higher than 100 samples h(-1) and has been satisfactorily applied to the RhB determination in commercial lipsticks.     

Fluorimetric determination of peroxynitrite based on an enzymatic reaction.

A novel fluorimetric method for the determination of peroxynitrite (ONOO-) using hemoglobin (Hb) as a catalyst is described. The method employs the reaction of ONOO with thiamine (TM), a colorless, non-fluorescent reagent in a glycine-NaCl-NaOH buffer solution (pH 12.7), to generate a highly fluorescent product, thiochrome (TC). The fluorescent product was monitored by fluorimetry. A linear calibration graph was obtained over an ONOO- concentration range from 4.95 x 10(-7) mol L(-1) to 2.97 x 10(-5) mol L(-1), with a detection limit of 9.78 x 10(-9) mol L(-1) ONOO-. The relative standard deviation at an ONOO- concentration of 2.11 x 10(-6) mol L(-1) was 4.15% (n = 9).     

Determination of proteins using the p-acetylchlorophosphonazo-barium(II) complex as a spectroprobe.

A novel spectrophotometric method has been developed for the determination of proteins using the p-acetychlorophosphonazo (CPA-pA)-barium(II) complex as a spectroprobe. In the pH range of 2.0-2.8, the absorbance of the CPA-pA-barium(II) complex at 649 nm is greatly decreased by protein. The absorbance decrease is in proportion to the concentration of protein in the range of 0-20 mg/L. The apparent molar absorptivities are 1.56 x 10(6), 1.70 x 10(6) and 6.04 x 10(5) L mol(-1) cm(-1) for bovine serum albumin (BSA), human serum albumin (HAS) and ovalbumin (OVA), respectively. The method is reproducible and simple, and has been used to determine total protein in human sera. The results are in agreement with those obtained by the pyrocatechol violet (PV)-Mo(VI) method, with relative standard deviations of 2.5-3.5% (n=6).     

Fluorimetric study of the interaction between human serum albumin and quinolones-terbium complex and its application

A highly sensitive spectrofluorimetric method is proposed for determination of human serum albumin (HSA) and some quinolone drugs. Using quinolones-terbium (Tb3+) complex as a fluorescent probe, in the buffer solution of pH 7.8, HSA can remarkably enhance the fluorescence intensity of the quinolones-Tb3+ complex at 545 nm and the enhanced fluorescence intensity of Tb3+ ion is in proportion to the concentration of HSA and quinolone drugs. Optimum conditions for the determination of HSA were also investigated. The linear ranges and limits of detection are 8.0 x 10(-9) to 8.0 x 10(-8) mol L(-1), 4.20 x 10(-9) mol L(-1) (for HSA); 1.0 x 10(-6) to 4.0 x 10(-6) mol L(-1), 1.87 x 10(-8) mol L(-1) (for norfloxacin) and 1.0 x 10(-7) to 1.0 x 10(-6) mol L(-1), 4.82 x 10(-8) mol L(-1) (for enoxacine), respectively. This method is simple, practical and relatively free interference from coexisting substances, as well as much more sensitive than most of the existing assays.     

A novel chemiluminescent method for the determination of salicylic acid in bactericidal solutions

A new flow-injection procedure has been developed for the determination of salicylic acid based on the enhancement of the chemiluminescence from the cerium(IV)-Tween 20 reaction by salicylic acid in acidic medium. The method is simple, selective and sensitive with a detection limit of 2.5x10(-9) g mL(-1). It is applicable to the determination of salicylic acid in the concentration range of 4.0x10(-9)-1.1x10(-6) g mL(-1). The relative standard deviation (RSD) is 0.85% for 4.0x10(-7) g mL(-1) salicylic acid (n=11). The method has been successfully applied to the determination of salicylic acid in bactericidal solutions. Furthermore, it is suggested that light emission from cerium(IV)-Tween 20 reaction is probably because of the formation of singlet oxygen 1O2* and the emitter is excited oxygen molecular pairs O2(1delta(g))O2(1sigma(g)-).     

A new spectrofluorometric probe for the determination of trace amounts of CoA in injection, human serum and pig livers.

A new spectrofluorometric method has been developed for the determination of trace amounts of coenzyme A (CoA). Using europium (Eu3+)-tetracycline (TC) complex as a fluorescent probe in the buffer solution of pH 6.80, CoA could remarkably enhance the fluorescence intensity of the Eu3+-TC complex at lambda = 612 nm after adding H(5)IO(6) and the enhanced fluorescence intensity is in proportion to the concentration of CoA. Optimum conditions for the determination of CoA were also investigated. The dynamic range for the determination of CoA is 6.08 x 10(-8) - 1.84 x 10(-5) mol L(-1) with detection limit of 4.62 x 10(-8) mol L(-1). This method is simple, practical and relatively free of interference from coexisting substances and can be successfully applied to determination of CoA in injection, human serum and pig liver samples. Moreover, the enhancement mechanisms of the fluorescence intensity in the Eu3+-TC system and the CoA-Eu3+-TC system have been also discussed.     

Determination of some catechol derivatives by a flow injection electrochemiluminescent inhibition method

A flow injection electrochemiluminescent inhibition method has been developed for the determination of some catechol derivatives based on studying the inhibition phenomena of these compounds to the electrochemiluminescence of luminol. The linear calibration range of 5x10(-8) to 1x10(-5), 5x10(-8) to 1x10(-5) and 1x10(-8) to 5x10(-5) mol l(-1(,)) the detection limit of 1.2x10(-8), 2.1x10(-8) and 5.2x10(-9) mol l(-1)were obtained for catechol, 3,4-dihydroxybenzoic acid and chlorogenic acid, respectively. The method has higher sensitivity and wider dynamic range than conventional spectrophotometric method or chemiluminescent method. The method has been successfully applied to determine chlorogenic acid in cigarettes. The mechanism of the inhibition effect was proposed. Catechol derivatives mostly react with the freshly electrogenerated oxygen species on the electrode surface and lead to the inhibition of electrochemiluminescence.     

Lead as own luminescent sensor for determination

In our experiments, it was observed that adding bromide to Pb2+ solution of N,N'-dimethylformamide (DMF), the highly emissive cluster Pb4Br11(3-) can be formed and the fluorescence intensity of the formed cluster is proportional to the concentration of Pb2+, based on which, a novel, simple approach that uses the emission from itself as the sensor for determination of Pb2+ is proposed. Under the optimum conditions, the linear range and detection limit is 1.0 x 10(-7) to 1.0 x 10(-5) mol l(-1) (correlation coefficient r = 0.9997) and 7.6 x 10(-9) mol l(-1), respectively. Foreign substrates effects were also investigated. The proposed method has been successfully applied to the determination of lead in the synthetic samples. The mechanism of the reaction is also studied.     

Simultaneous determination of dissolved anthracene and pyrene in aqueous solution by synchronous fluorimetry

A synchronous fluorimetry for simultaneous determination of dissolved anthracene and pyrene in aqueous solution has been established. The linear ranges for determination of dissolved anthracene and pyrene were 1.00x10(-8) to 4.50x10(-7)molL(-1) and 5.00x10(-9) to 6.50x10(-7)molL(-1), and the limits of detection (LOD) for anthracene and pyrene were 2.23x10(-9) and 8.24x10(-10)molL(-1) with relative standard deviations (R.S.D.) of 2.90 and 2.34% (n=5), respectively. Satisfactory results were obtained when the established method was used to simultaneously determine anthracene and pyrene in spiked water samples.     

Flow injection with inhibited chemiluminescence method for the determination of dopamine hydrochloride.

A simple rapid and accurate flow injection inhibitory chemiluminescence method has been developed for the determination of dopamine hydrochloride based on its inhibition of the chemiluminescence from the luminol-potassium hexacyanoferrate(III) system. The linear range of determination is 4.0 x 10(-9) - 4.0 x 10(-7) g ml(-1) for dopamine hydrochloride and the detection limit is 1.14 x 10(-9) g ml(-1). The method has been applied to determine the content of dopamine in pharmaceutical preparation with satisfactory results.     

Monitoring the removal of carbonate from alkali metal hydroxide solutions using gas diffusion flow injection

Monitoring the removal of carbonate from alkali metal hydroxide (MOH, M = K, Na) solutions with calcium oxide (CaO) was studied using a newly developed method for the determination of trace amounts of total carbonate (TC) in alkaline solutions based on a flow injection (FI) technique coupled with a gas diffusion system. The optimized conditions of the FI system were as follows: the flow rate of each carrier, reaction solution (H2SO4) and receptor solution (Cresol Red, pH 8.9) was 0.25 ml min(-1), the sample size was 0.1 ml and the concentration of H2SO4 in the reaction solution was 0.09 M. The limit of detection of TC by the proposed method was 4 x 10(-7) M. The removal efficiency of carbonate was affected by the amount of CaO added, the shaking time of the solutions and the concentration of MOH. For 1 M NaOH and KOH solution, the removal efficiency of carbonate was about 99% and the concentration of residual carbonate was 4 x 10(-5) and 1.2 X 10(-4) M, respectively, when the amount of CaO added was 2 g l(-1) and the shaking time was 16 h.     

Molecularly imprinted solid-phase extraction combined with electrochemical oxidation fluorimetry for the determination of methotrexate in human serum and urine

The method of synthesis and evaluation of molecularly imprinted polymers was reported. As a selective solid-phase extraction sorbent, the polymers were coupled with electrochemical fluorimetry detection for the efficient determination of methotrexate in serum and urine. Methotrexate was preconcentrated in the molecularly imprinted solid-phase extraction microcolumn packed with molecularly imprinted polymers, and then eluted. The eluate was detected by fluorescence spectrophotometer after electrochemical oxidation. The conditions of preconcentration, elution, electrochemical oxidation and determination were carefully studied. Under the selected experimental conditions, the calibration graph of the fluorescence intensity versus methotrexate concentration was linear from 4x10(-9) g mL(-1) to 5x10(-7) g mL(-1), and the detection limit was 8.2x10(-10) g mL(-1) (3sigma). The relative standard deviation was 3.92% (n=7) for 1x10(-7) g mL(-1) methotrexate. The experiments showed that the selectivity and sensitivity of fluorimetry could be greatly improved by the proposed method. This method has been successfully applied to the determination of methotrexate. At the same time, the binding characteristics of the polymers to the methotrexate were evaluated by batch and dynamic methods.     

Determination of myoglobin based on its enzymatic activity by stopped-flow spectrophotometry

A new method has been developed for the determination of myoglobin (Mb) based on its enzymatic activity for the oxidation of o-phenylenediamine (OPDA) with hydrogen peroxide. Stopped-flow spectrophotometry was used to study the kinetic behavior of the oxidation reaction. The catalytic activity of Mb was compared to other three kinds of catalyst. The time dependent absorbance of the reaction product, 2,3-diamimophenazine (DAPN), at a wavelength of 426 nm was recorded. The initial reaction rate obtained at 40 degrees C was found to be proportional to the concentration of Mb in the range of 1.0 x 10(-6) to 4.0 x 10(-9)mol L(-1). The detection limit of Mb was found to be 9.93 x 10(-10)mol L(-1). The relative standard deviations were within 5% for the determination of different concentrations of Mb. Excess of bovine serum albumin (BSA), Ca(II), Mg(II), Cu(II), glucose, caffeine, lactose and uric acid did not interfere.     

Determination of trace amounts of dipyridamole by stripping voltammetry using a Nafion modified electrode

This paper presents a new method for determination of dipyridamole by anodic stripping voltammetry using a Nafion modified glassy carbon electrode. The stripping peak current was proportional to the concentration of dipyridamole over the range of 1.0 x 10(-9)-8.0 x 10(-8) M in (pH 1.7) BrittondashRobinson buffer with 1 min accumulation. The detection limit has been estimated as 8.0 x 10(-11) M with 4 min accumulation. The method has been successfully applied to the determination of dipyridamole in human serum.     

A novel method for time-resolved fluorimetric determination and imaging of the activity of peroxidase, and its application to an enzyme-linked immunosorbent assay

A new type of fluorescence assay for the determination of peroxidase (POx) activity is presented. The assay is based on the indication of the enzymatic consumption of H(2)O(2) (HP), using a fluorescent europium-tetracycline (Eu(3)TC) complex as indicator. On addition of HP, this complex forms a highly fluorescent adduct (Eu(3)TC-HP), which is decomposed in the presence of POx to form the weakly fluorescent europium-tetracycline (Eu(3)TC). Hence, the activity of the enzyme can be directly determined by means of the luminescent Eu(3)TC complex as indicator. The POx assay demonstrated herein was elaborated starting from a spectral characterization of the complex systems involved. Due to the long lifetime of lanthanide luminescence, both steady-state and time-resolved luminescence assays can easily be performed. The time-resolved assay can quantify POx in the range from 4.0 x 10(-5) to 5.9 x 10(-3) U mL(-1), with a limit of detection of 1.0 x 10(-5) U mL(-1). The effects of POx inhibitors such as cyanide, hydroxylamine, and azide have also been studied. In addition, a time-resolved fluorescent detection method for a POx-based enzyme-linked immunosorbent assay (ELISA) has been developed, which is demonstrated in a sandwich model assay with bovine IgG serving as analyte. Furthermore, a time-resolved fluorescent imaging method is demonstrated that makes use of a straightforward imaging set-up adjusted to the optical properties of the europium reagent.     

Differential pulse polarographic determination of dicrotophos, crotoxyphos and chlorfenvinphos in grains and soils

A simple, sensitive and rapid differential pulse polarographic method has been developed for the quantitative determination of organophosphorus pesticides such as dicrotophos, crotoxyphos and chlorfenvinphos in agricultural formulations in universal buffers of a pH range 2.0-12.0. The sample is treated with ethanol to facilitate the dissolution of these pesticides. Both standard addition and calibration methods can be used for the analyses. The lower detection limits are 1.25x10(-9), 1.05x10(-9) and 1.0x10(-9) M, respectively. The method can be applied successfully to determination of these pesticides in grains and soil.     

Voltammetric determination of copper and lead in gasoline using sample preparation as microemulsions.

A voltammetric method for the determination of Cu(II) and Pb(II) in gasoline using sample preparation as three-component solutions (gasoline:propan-1-ol:water, 25:60:15 v/v/v) is proposed. HNO(3) was employed as a supporting electrolyte and to allow the use of aqueous inorganic standards for calibration, even if the analyte species originally in gasoline is present as a metallo-organic form. A square-wave anodic sequential determination was used by measuring the stripping current of Cu(II) (at +104 mV) using a glassy carbon electrode (GCE) and, in a second run, measuring the Pb(II) stripping current (at -470 mV) using a bismuth-film deposited on the surface of the GCE. The method allowed the quantification of 1.7 x 10(-9) mol L(-1) of Cu and 1.4 x 10(-10) mol L(-1) of Pb employing a 1500-s accumulation time. Recovery tests using analyte spiked three-component solutions prepared with commercial gasoline samples enabled recoveries of Cu and Pb from 97 +/- 8 to 102 +/- 5%.