Improving the properties of HDPE based separators for lithium ion batteries by blending block with copolymer PE-b-PEG

To improve the performances of HDPE-based separators, polyether chains were incorporated into HDPE membranes by blending with poly(ethylene-block-ethylene glycol) (PE-b-PEG) via thermally induced phase separation (TIPS) process. By measuring the composition, morphology, crystallinity, ion conductivity, etc, the influence of PE-b-PEG on structures and properties of the blend separator were investigated. It was found that the incorporated PEG chains yielded higher surface energy for HDPE separator and improved affinity to liquid electrolyte. Thus, the stability of liquid electrolyte trapped in separator was increased while the interfacial resistance between separator and electrode was reduced effectively. The ionic conductivity of liquid electrolyte soaked separator could reach 1.28 × 10-3 S.cm-1 at 25℃, and the electrochemical stability window was up to 4.5 V (versus Li + /Li). These results revealed that blending PE-b-PEG into porous HDPE membranes could efficiently improve the performances of PE separators for lithium batteries.     

Supercapacitor based on graphene and ionic liquid electrolyte

A new kind of supercapacitor by using chemical reduced graphene (CRG) as electrode material and ionic liquid with addition of acetonitrile as electrolyte is assembled and investigated. CRG materials with high surface area are prepared by chemical reduction of graphene oxide. The capacitive properties of the supercapacitor composed of the CRG and ionic liquid electrolyte are studied by electrical impedance spectroscopy, cyclic voltammetry and galvanostatic charge–discharge. With the combined advantages of graphene and ionic liquid, the supercapacitor shows perfect performance. The supercapacitor possesses wide cell voltage and good stability. The specific capacitance, energy density, and specific power density of the present supercapacitor are 132?Fg^??, 143.7?Wh?kg^??, and 2.8?kW?kg^??, respectively. The results demonstrate the potential application of electrical energy storage devices with high performance based on this new kind of supercapacitor.     

Supercapacitor based on graphene and ionic liquid electrolyte

A new kind of supercapacitor by using chemical reduced graphene (CRG) as electrode material and ionic liquid with addition of acetonitrile as electrolyte is assembled and investigated. CRG materials with high surface area are prepared by chemical reduction of graphene oxide. The capacitive properties of the supercapacitor composed of the CRG and ionic liquid electrolyte are studied by electrical impedance spectroscopy, cyclic voltammetry and galvanostatic charge–discharge. With the combined advantages of graphene and ionic liquid, the supercapacitor shows perfect performance. The supercapacitor possesses wide cell voltage and good stability. The specific capacitance, energy density, and specific power density of the present supercapacitor are 132 Fg⁻¹, 143.7 Wh kg⁻¹, and 2.8 kW kg⁻¹, respectively. The results demonstrate the potential application of electrical energy storage devices with high performance based on this new kind of supercapacitor.

     

Porous nitrogen-doped graphene for high energy density supercapacitors in an ionic liquid electrolyte

Porous nitrogen-doped graphene (PNG) has been prepared via simple thermal treatment of graphene oxide and urea, and the morphology and structure of the PNG have been characterized by using a range of electron microscopy, X-ray photoelectron spectroscopy, and other techniques. The electrochemical performances of the PNG have been investigated in an ionic liquid electrolyte by cyclic voltammetry and galvanostatic charge-discharge via both three-electrode and two-electrode configurations. The PNG electrode delivers a specific capacitance of 310 F g^?1 at 1 A g^?1 with good cycling stability over 4000 cycles. The high electrochemical performance is ascribed to the porous structure and nitrogen-doping in the PNG. The porous structure enables high specific surface area and rapid ion mobility, contributing to double layer capacitance, while the N-doping enhances electrochemical activity and electric conductivity, contributing to pseudocapacitance. Meanwhile, the ionic liquid electrolyte enables a very wide working voltage of 3 V, leading to a high energy density up to 163.8 W h kg^?1. The fabricated supercapacitor can light up a LED for a long while with low self-discharge, showing good potential for practical application.     

Electrospun octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane-modified polyvinylidene fluoride/poly(acrylonitrile)/poly(methylmethacrylate) gel polymer electrolyte for high-performance lithium ion battery

Gel polymer electrolyte (GPE) based on octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane (OCP-POSS)-modified polyvinylidene fluoride/poly(acrylonitrile) /poly(methylmethacrylate) (PVDF/PAN/PMMA) fibrous membrane was prepared by electrospinning method to improve the thermal stability of GPE and prevent the leakage of liquid electrolyte for lithium ion battery. The effect of OCP-POSS content on the morphology, porosity and electrolyte uptake, mechanical strength, thermal stability of spinning fibrous membrane and ionic conductivity, electrochemical stability window, and interface resistance of GPE was investigated. The cycle performance of cells assembled with GPE was also tested. The results show that the spinning fibrous membrane with 10 wt% OCP-POSS possesses high electrolyte uptake (660%) and excellent thermal stability. The ionic conductivity of corresponding GPE is 9.23 × 10^?3 S cm^?1 at room temperature and the electrochemical stability window is up to 5.82 V; the interface resistance of 10 wt% OCP-POSS modified GPE decreases by 42% after 168 h compared with pure PVDF/PAN/PMMA GPE. Furthermore, cells assembled with 10 wt% OCP-POSS modified GPE show high discharge capacity (166.5 mA h g^?1 at 0.1 C) and excellent cycle stability during 50 cycles. The results indicate that the GPE could improve the safety of lithium ion battery and show great potential in lithium ion battery applications.     

High‐Energy Rechargeable Metallic Lithium Battery at −70 °C Enabled by a Cosolvent Electrolyte

Lithium metal is an ideal anode for high‐energy rechargeable batteries at low temperature, yet hindered by the electrochemical instability with the electrolyte. Concentrated electrolytes can improve the oxidative/reductive stability, but encounter high viscosity. Herein, a co‐solvent formulation was designed to resolve the dilemma. By adding electrochemically “inert” dichloromethane (DCM) as a diluent in concentrated ethyl acetate (EA)‐based electrolyte, the co‐solvent electrolyte demonstrated a high ionic conductivity (0.6 mS cm^?1), low viscosity (0.35 Pa s), and wide range of potential window (0–4.85 V) at ?70 °C. Spectral characterizations and simulations show these unique properties are associated with the co‐solvation structure, in which high‐concentration clusters of salt in the EA solvent were surrounded by mobile DCM diluent. Overall, this novel electrolyte enabled rechargeable metallic Li battery with high energy (178 Wh kg^?1) and power (2877 W kg^?1) at ?70 °C.     

Magnesium ion transport in poly(ethylene oxide)-based polymer electrolyte containing plastic-crystalline succinonitrile

A new composition of magnesium (Mg)-ion-conducting polymer electrolyte comprising poly(ethylene oxide) (PEO) complexed with Mg trifluoromethanesulfonate (Mg triflate or Mg(Tf)₂) containing different amounts of a nonionic plastic crystal succinonitrile (SN) has been prepared and characterized. High polarity and rotational disorder of the SN molecules in the plastic-crystalline phase, supports the enhancement of ionic conductivity of the PEO-Mg(Tf)₂ complex system, showing a maximum room temperature ionic conductivity of ～6?×?10^-4 S cm^?1 observed with the addition of 50 wt.% of SN. X-ray diffraction, optical microscopy, and differential scanning calorimetry suggest a substantial structural modification, decrease in crystallinity, and various interactions in the polymer electrolyte components due to addition of SN. The cyclic voltammetry, impedance, and dc polarization studies confirm the Mg-ion conduction in the PEO complex. The electrochemical potential window of the electrolyte, observed from the linear sweep voltammetry, is determined to be ～4.1 V. The performance characteristics of the SN-incorporated polymer electrolyte system indicate their potential applicability as electrolytes in ionic devices including Mg batteries.     

Flexible lithium metal capacitors enabled by an in situ prepared gel polymer electrolyte

The rapid development of next-generation flexible electronics stimulates the growing demand for flexible and wearable power sources with high energy density. Li metal capacitor (LMC), combining with a Li metal anode and an activated carbon cathode, exhibits extremely high energy density and high power density due to the unique energy storage mechanism, thus showing great potential for powering wearable electronic devices. Herein, a flexible LMC based on an in situ prepared PETEA-based gel polymer electrolyte (GPE) was reported for the first time. Owing to the high ionic conductivity of PETEA-based GPE (5.75 × 10⁻³ S/cm at 20 °C), the assembled flexible LMC delivers a high capacitance of 210 F/g at 0.1 A/g within the voltage range from 1.5 V to 4.3 V vs. Li/Li⁺, a high energy density of 474 Wh/kg at 0.1 A/g and a high power density of 29 kW/kg at 10 A/g. More importantly, PETEA-based GPE endows the LMC with excellent flexibility and safety, which could work normally under abuse tests, such as bending, nail penetration and cutting. The in situ prepared PETEA-based GPE simplifies the fabrication process, avoids the risk of leakage and inhibits the growth of Li dendrite, making LMC a promising flexible energy storage device for the flexible electronic field.     

Mesoporous tubular graphene electrode for high performance supercapacitor

Mesopores tubular graphene, synthesized by template method, have unique bi-directional ions transfer channel in unstack graphene layers and high mesopore ratio, exhibiting excellent capacitance performance in the EDLC using ionic liquid electrolyte at 4 V.     

Preparation and properties of polyaniline codoped with ionic liquid and dodecyl benzene sulfonic acid or hydrochloric acid

Three nanosized polyaniline (PAn) powders doped with ionic liquid and dodecyl benzene sulfonic acid (DBSA) or hydrochloric acid have been prepared for the first time in an ionic liquid-water emulsion system. The oil-phase ionic liquid is used as both a monomer solvent and doped counterion. The effects of different counterions on the properties (molecular weight, electrical conductivity, glass transition temperature, electrochemical activity) of PAn are investigated. PAn codoped with 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid and DBSA shows the highest molecular weight (81 104 g mol^?1), the highest electrical conductivity (1.85 S cm^?1), the lowest glass transition temperature (181°C) and the highest redox reaction current density; PAn doped with an ionic liquid only exhibits the lowest conductivity (0.0018 S cm^?1) and a lower redox reaction current density. PAn codoped with ionic liquid and HCl shows higher conductivity. They also exhibit good electrochemical stability and charge-discharge performance. These indicate that codoping of different counterions under acidic conditions could improve the degree of oxidation and doping ratio of PAn and could result in high electrical conductivity and good electrochemical properties.     

塑晶基离子液体合成及其电化学性能

通过简单、易于工业化的重结晶方法制备了高纯1-甲基-1-乙基吡咯烷鎓双(三氟甲基磺酰)亚胺盐(P₁₂TFSI)塑晶化合物. 在此化合物中加入30% (摩尔分数, x)双(氟磺酰)亚胺锂(LiFSI)后, 得到P₁₂TFSI/LiFSI 塑晶基离子液体. 采用循环伏安法、恒电压极化法及恒电流充放电法等电化学方法考察了该离子液体的电化学窗口、铝箔集流体的腐蚀性及电池性能. 结果表明, 该离子液体电解质具有5.00 V的电化学窗口, 室温离子电导率达到0.92 mS·cm^-1, 且不腐蚀Al 集流体. 以该塑晶离子液体作为电解液组装的实验电池LiCoO₂/Li 表现出良好的充放电特性及循环性能, 在较低倍率下能够和使用碳酸酯类电解液组装的实验电池的性能相媲美. 在4.50 V高电压下, 循环20周后, 容量仍能保持在175 mAh·g^-1, 容量保持率为95.1%. 这些结果说明该离子液体在高性能锂二次电池中具有良好的应用前景.     

Improved properties of positive electrolyte for a vanadium redox flow battery by adding taurine

Taurine was employed as an additive to improve the thermal stability and electrochemical performance of positive electrolyte for a vanadium redox flow battery. The addition of taurine could significantly improve the thermal stability of positive electrolyte, and 2 M V(V) electrolyte with 4 mol% taurine could keep it stable at 40 °C for 120 h, which was 54 h longer than the pristine one. Electrochemical measurements showed that the electrolyte with taurine exhibited superior electrochemical activity and reaction kinetics with a larger diffusion coefficient, exchange current density and reaction rate constant compared with the pristine one. Moreover, the cell using taurine as additive achieved higher average energy efficiency (81.75%) than the pristine cell (79.15%). The Raman and XPS spectroscopy illustrated that taurine could combine with VO²⁺ to form a small molecule complex and the –NH₂ in taurine could be adsorbed on the surface of the electrode to provide more active sites for the electrode reaction, which led to the improvement of mass transfer and the charge transfer process for the V(IV)/V(V) redox reaction.     

Ionic liquid-mediated aqueous redox flow batteries for high voltage applications

Aqueous redox flow batteries with high cell voltages represent a promising approach for low-cost, high safety and high energy density applications. However, water breakdown is a major concern because it limits cell voltage. For the first time, we report the use of a highly concentrated aqueous ionic liquid electrolyte, 1-butyl-3-methylimidazolium chloride (BMImCl)-H₂O, in an aqueous flow battery operating with a broad electrochemical stability window of 3 V. The proof-of-concept was demonstrated using 2 V redox couples of metal acetylacetonates and a hybrid Zn/Ce flow battery.     

Redox-active electrolyte supercapacitors using electroactive ionic liquids

Here we present redox ionic liquid supercapacitors (RILSCs) which use electrolytes made from ionic liquids modified with an electroactive function to increase the energy density of activated carbon electrodes via faradaic reactions. More specifically, two different ionic liquids were made by modifying either the imidazolium cation or the bis(trifluoromethanesulfonyl)imide anion with ferrocene in order to determine the importance of the electroactive ion's polarity. The functionalization of an ionic liquid with ferrocene led to high concentrations of redox moieties in the electrolyte (2.4 M) and a large maximum operating voltage (2.5 V). An energy density of up to 13.2 Wh per kg (both electrodes) was obtained which represents an 83% increase vs. the unmodified ionic liquid. When the ionic liquid's anion is modified with ferrocene, the self-discharge at the positive electrode is fully suppressed due to the deposition of a film on the electrode. The results presented herein demonstrate that electroactive ionic liquids constitute a promising alternative to conventional solute in solvent electrolytes found in energy storage devices, and are particularly well-suited for redox-active electrolyte supercapacitors.     

Polymer/colloid dual-phase electrolyte membrane for rechargeable lithium batteries

In this work, a polymer/ceramic phase-separation porous membrane is first prepared from polyvinyl alcohol–polyacrylonitrile water emulsion mixed with fumed nano-SiO₂ particles by the phase inversion method. This porous membrane is then wetted by a non-aqueous Li–salt liquid electrolyte to form the polymer/colloid dual-phase electrolyte membrane. Compared to the liquid electrolyte in conventional polyolefin separator, the obtained electrolyte membrane has superior properties in high ionic conductivity (1.9 mS?cm^?1 at 30 °C), high Li⁺ transference number (0.41), high electrochemical stability (extended up to 5.0 V versus Li⁺/Li on stainless steel electrode), and good interfacial stability with lithium metal. The test cell of Li/LiCoO₂ with the electrolyte membrane as separator also shows high-rate capability and excellent cycle performance. The polymer/colloid dual-phase electrolyte membrane shows promise for application in rechargeable lithium batteries.     

High Molar Extinction Coefficient Organic Sensitizers for Efficient Dye‐Sensitized Solar Cells

We have designed and synthesized highly efficient organic sensitizers with a planar thienothiophene–vinylene–thienothiophene linker. Under standard global AM 1.5 solar conditions, the JK‐113 ‐sensitized cell gave a short circuit photocurrent density (J_sc) of 17.61 mA cm^?2, an open‐circuit voltage (V_oc) of 0.71 V, and a fill factor (FF) of 72 %, corresponding to an overall conversion efficiency (η) of 9.1 %. The incident monochromatic photo‐to‐current conversion efficiency (IPCE) of JK‐113 exceeds 80 % over the spectral region from 400 to 640 nm, reaching its maximum of 93 % at 475 nm. The band tails off toward 770 nm, contributing to the broad spectral light harvesting. Solar‐cell devices based on the sensitizer JK‐113 in conjunction with a volatile electrolyte and a solvent‐free ionic liquid electrolyte gave high conversion efficiencies of 9.1 % and 7.9 %, respectively. The JK‐113 ‐based solar cell fabricated using a solvent‐free ionic liquid electrolyte showed excellent stability under light soaking at 60 °C for 1000 h.     

Laser-Induced Interdigital Structured Graphene Electrodes Based Flexible Micro-Supercapacitor for Efficient Peak Energy Storage

The rapidly developing demand for lightweight portable electronics has accelerated advanced research on self-powered microsystems (SPMs) for peak power energy storage (ESs). In recent years, there has been, in this regard, a huge research interest in micro-supercapacitors for microelectronics application over micro-batteries due to their advantages of fast charge–discharge rate, high power density and long cycle-life. In this work, the optimization and fabrication of micro-supercapacitors (MSCs) by means of laser-induced interdigital structured graphene electrodes (LIG) has been reported. The flexible and scalable MSCs are fabricated by CO₂-laser structuring of polyimide-based Kapton ^® HN foils at ambient temperature yielding interdigital LIG-electrodes and using polymer gel electrolyte (PGE) produced by polypropylene carbonate (PPC) embedded ionic liquid of 1-ethyl-3-methyl-imidazolium-trifluoromethansulphonate [EMIM][OTf]. This MSC exhibits a wide stable potential window up to 2.0 V, offering an areal capacitance of 1.75 mF/cm² at a scan rate of 5.0 mV/s resulting in an energy density (E_a) of 0.256 µWh/cm² @ 0.03 mA/cm² and power density (P_a) of 0.11 mW/cm² @0.1 mA/cm². Overall electrochemical performance of this LIG/PGE-MSC is rounded with a good cyclic stability up to 10,000 cycles demonstrating its potential in terms of peak energy storage ability compared to the current thin film micro-supercapacitors.     

Recent advances of newly designed in-situ polymerized electrolyte for high energy density/safe solid Li metal batteries

It is revealed that the application of commercial liquid organic electrolytes encountered increasing safety hazards to achieve higher energy density. The replace of solid electrolytes could eliminate most safety issues induced by liquid electrolytes. However, both solo polymer electrolyte and inorganic electrolyte have difficulty to simultaneously acquire high ionic conductivity and good interfacial compatibility. At this circumstance, in-situ polymerization is developed to construct a compatible interface with high ionic conductivity and improved safety performances. In this review, recent advances of newly designed electrolyte are summarized and discussed. It is realized that the polymerization conversion of monomer and construction of 3D inorganic structure are the factors deserve consideration for high security and energy density. Finally, the challenges and future perspectives are outlined to foresee the development of in-situ polymerized electrolytes.     

A Shuttle-Free Solid-State Cu−Li Battery Based on a Sandwich-Structured Electrolyte

Cu−Li batteries leveraging the two-electron redox property of Cu can offer high energy density and low cost. However, Cu−Li batteries are plagued by limited solubility and a shuttle effect of Cu ions in traditional electrolytes, which leads to low energy density and poor cycling stability. In this work, we rationally design a solid-state sandwich electrolyte for solid-state Cu−Li batteries, in which a deep-eutectic-solvent gel with high Cu-ion solubility is devised as a Cu-ion reservoir while a ceramic Li_1.4Al_0.4Ti_1.6(PO₄)₃ interlayer is used to block Cu-ion crossover. Because of the high ionic conductivity (0.55 mS cm⁻¹ at 25 °C), wide electrochemical window (>4.5 V vs. Li⁺/Li), and high Cu ion solubility of solid-state sandwich electrolyte, a solid-state Cu−Li battery demonstrates a high energy density of 1 485 Wh kg_Cu⁻¹and long-term cyclability with 97 % capacity retention over 120 cycles. The present study lays the groundwork for future research into low-cost solid-state Cu−Li batteries.     

闭式十氢十硼酸盐的制备及其固体电解质应用研究进展

全固态电池是一种具有前景的电化学储能装置,它可以克服传统有机液体电解质电池的多方面不足,包括电解质易泄漏、稳定性低、易燃和能量密度有限等问题。固态电解质是全固态电池的重要组成部分,开发具有高离子电导率和宽电化学稳定性窗口的固体电解质是研制高能量和高功率密度全固态电池的关键问题之一。硼氢化物基固态电解质作为一类新型电解质,因具有高离子电导率、高热稳定性和低密度等优势而受到了广泛关注。其中,闭式十氢十硼酸碱金属盐是代表性材料之一。自1959年B₁₀H₁₀^2-被发现以来,其合成方法、结构与应用开发都得到了广泛研究。近年来其在固态电解质方面的研究证实,M₂B₁₀H₁₀（M=Na、Li等）及其衍生物具有高离子电导率、高热稳定性和化学稳定性、高电位窗口等特性,是一类颇具前景的固态电解质材料。本文主要综述了B₁₀H₁₀^2-合成方法及其在固态电解质方面的应用研究进展,并对今后B₁₀H₁₀^2-作为固态电解质的发展方向提出了展望。