Complexation of copper(II) ions with imidazole–carboxylic polymeric systems

The interaction of two polyampholyte systems, poly(1‐vinylimidazole‐co‐acrylic acid) and interpolymer complex poly(acrylic acid)/poly(1‐vinylimidazole) with copper(II) ions in water, was examined with potentiometry (pH‐metry and Cu‐selective electrode) and electron spin‐resonance spectroscopy. Coordination of Cu²⁺ with copolymer proceeded by carboxylic groups, whereas the interpolymer system azole units were also involved in the inner sphere of the complex. Synergism between coordination with metal ions and intramolecular hydrogen or ionic bonds was shown. The interpolymer complex was an effective system for binding, extracting, and concentrating copper ions from water. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2256–2263, 2003     

Xanthine Sensors Based on Anodic and Cathodic Detection of Enzymatically Generated Hydrogen Peroxide

A xanthine biosensor was fabricated by the covalent immobilization of xanthine oxidase (XO) onto a functionalized conducting polymer (Poly‐5, 2′: 5′, 2″‐terthiophine‐3‐carboxylic acid), poly‐TTCA through the formation of amide bond between carboxylic acid groups of poly‐TTCA and amine groups of enzyme. The immobilization of XO onto the conducting polymer (XO/poly‐TTCA) was characterized using cyclic voltammetry, quartz crystal microbalance (QCM), and X‐ray photoelectron spectroscopy (XPS) techniques. The direct electron transfer of the immobilized XO at poly‐TTCA was found to be quasireversible and the electron transfer rate constant was determined to be 0.73 s^?1. The biosensor efficiently detected xanthine through oxidation at +0.35 V and reduction at ?0.25 V (versus Ag/AgCl) of enzymatically generated hydrogen peroxide. Various experimental parameters, such as pH, temperature, and applied potential were optimized. The linear dynamic ranges of anodic and cathodic detections of xanthine were between 5.0×10^?6?1.0×10^?4 M and 5.0×10^?7 to 1.0×10^?4 M, respectively. The detection limits were determined to be of 1.0×10^?6 M and 9.0×10^?8 M with anodic and cathodic processes, respectively. The applicability of the biosensor was tested by detecting xanthine in blood serum and urine real samples.     

Complexation of poly(acrylic acid)s with uranyl ion

The complexation of uranyl ion (UO₂²⁺) in aqueous solution with polymers containing carboxylic acid groups was studied potentiometrically. Overall formation constants of the uranyl complexes with poly(methacrylic acid) and crosslinked poly(acrylic acid) were much larger than those with the corresponding low molecular carboxylic acids. Decrease in the viscosity of the polymer solution on adding uranyl ion indicated that poly(acrylic acid) forms intra-polymer chelates with uranyl ion. The crosslinked poly(acrylic acid) adsorbed uranyl ions at higher efficiency than transition metal ions.     

Synthesis and Crystal Structures of [(Nicotinic Acid)2H]+I-, [(2-Amino-6-methylpyridine)H]+(NO3)-, and the 1:1 Complex Between 1-Isoquinoline Carboxylic Acid (Zwitter Ion) and L-Ascorbic Acid Assembled via Hydrogen Bonds

Three new complexes, namely [(nicotinic acid)₂H]⁺I^–, [(2-amino-6-methylpyridine)H]⁺ (NO₃)^–, and the 1:1 complex between 1-isoquinoline carboxylic acid (zwitter ion form) and L-ascorbic acid were synthesized. The IR spectra revealed different types of hydrogen bonds in these compounds. The X-ray structure determination has shown the first compound to consist of a packing of [(nicotinic acid)₂H]⁺ cations and I^– anions. In the dimeric cation the two nicotinic acid molecules (zwitter ions) are connected through hydrogen bonds (O–HO). Each dimer is further engaged in other hydrogen bonds with adjacent dimers giving 2D layers. The I^– ion is located at the inversion center. In the second compound the cation and anion are connected via hydrogen bonds formed between oxygen atoms of the NO₃ ^– anion and NH and NH₂ of the cation generating a layer structure. All atoms are coplanar on mirror planes. In the 1:1 complex the two molecules are connected through hydrogen bonds formed between the two oxygen atoms of the carboxylate group of 1-isoquinoline carboxylic acid (zwitter ion) and the oxygen atoms of the two adjacent hydrogen groups of the L-ascorbic acid molecule. These complex molecules are engaged in other hydrogen bonds with each other forming a 2D system normal to the long b-axis of the unit cell.     

Density functional theoretical study of pKa of RCOOH (RH,CH3, and C2H5) using the combination of the extended clusters‐continuum model

The accurate pK_a determinations for three carboxylic acids have been investigated using the combination of the extended clusters‐continuum model at B3LYP/6‐31+g(d,p) and B3LYP/6‐311++g(d,p) levels. To take into account of the effect of the water combined with carboxylic acids in different positions, eleven molecular clusters were considered. Among these clusters, the one involving the carboxylic acid wrapped up with water molecules and saturated with hydrogen bonds (four hydrogen bonds around ? COOH) leads to the best B3LYP pK_a results compared to the experimental data. For those clusters saturated with hydrogen bonds, when n = 3 (the number of water molecules), the average absolute errors between the calculated pK_a results and experimental data of these three carboxylic acids were 0.19 (0.23) and 0.12 (0.22) pK_a at B3LYP/6‐31+g(d,p)//PCM (IEFPCM) and B3LYP/6‐311++g(d,p)//PCM (IEFPCM) levels, respectively; when n = 4, they are 0.53 (1.23) and 1.09 (1.03) pK_a, respectively. On the basis of the above results, the molecular cluster saturated with four hydrogen bonds formed by three waters and one carboxylic acid molecule was the chief existence in the carboxylic acid solution. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Potentiometric response of graphite electrodes coated with modified polymer films

Graphite electrodes coated with chemically-modified polymer films are described. Several different polymers were used, including poly(acrylic acid), poly[triethyl(vinylbenzyl)ammonium chloride], poly[trihexyl(vinylbenzyl)ammonium chloride], and poly[trihexyl(vinylbenzyl)ammonium thiocyanate]. A cation-responsive electrode can be prepared from poly(acrylic acid)-coated graphite. Anion-responsive electrodes can be prepared from graphite coated with polymeric quaternary amines. In these electrodes, the ion-sensing species is irreversibly attached to the polymer (rather than physically entrapped within a polymer matrix); this factor eliminates leaching of the active component, and the addition of a plasticizer is unnecessary. A selective sensor for thiocyanate is described; it yields a Nernstian response over the concentration range 1 × 10^?1–1 × 10^?5 M sodium thiocyanate.     

Solid‐State NMR investigations of anhydrous proton‐conducting acid–base poly(acrylic acid)– poly(4‐vinyl pyridine) polymer blend system: A study of hydrogen bonding and proton conduction

NMR studies of the structure and dynamics of a system composed of the acidic polymer poly(acrylic acid) (PAA) and the basic polymer poly(4‐vinyl pyridine) (P4VP) are presented. This system aims at the application of anhydrous proton‐conducting membranes that can be used at elevated temperatures at which the proton conduction of hydrated membranes breaks down. The ¹H NMR measurements have been preformed under fast magic angle spinning (MAS) conditions to achieve sufficient resolution and the applied ¹H NMR methods vary from simple ¹H MAS to double‐quantum filtered methods and two‐dimensional ¹H double‐quantum spectroscopy. The dynamic behavior of the systems has been investigated via variable temperature ¹H MAS NMR. ¹³C cross‐polarization MAS NMR provides additional aspects of dynamic and structural features to complete the picture. Different types of acidic protons have been identified in the studied PAA‐P4VP systems that are nonhydrogen‐bonded free acidic protons, hydrogen‐bonded dicarboxylic dimers, and protons forming hydrogen bonds between carboxylic protons and ring nitrogens. The conversion of dimer structures in dried PAA to free carboxylic acid groups is accomplished at temperatures above 380 K. However, the stability of hydrogen‐bonding strongly depends on the hydration level of the polymer systems. The effect of hydration becomes less apparent in the complexes. An inverse proportionality between hydrogen‐bonding strength and proton conduction in the PAA‐P4VP acid–base polymer blend systems was established. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 138–155, 2009     

Novel Copper(II)-Selective Potentiometric Sensor Based on a Folic Acid-Functionalized Carbon Nanotube Material

Abstract

A folic acid-functionalized carbon nanotube nanomaterial was prepared by immobilizing folic acid molecules on the carbon nanotubes through covalent bonds. The material was characterized using Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy and scanning electron microscopy. Fourier transform infrared spectroscopy confirmed that folic acid molecules were grafted on the carbon nanotube surfaces through the amide bonds between the carboxylic acid functional groups of the oxidized carbon nanotubes and the amine groups of the folic acid molecules. The folic acid molecules bonded to carbon nanotube surfaces led to appreciable changes in the morphology. By using currently obtained folic acid-functionalized carbon nanotube nanomaterial as electroactive material in a polyvinyl chloride membrane, a potentiometric copper (II)-selective sensor was developed. Membrane optimization studies showed that the composition exhibiting the best potentiometric properties was 4.0% (w/w) folic acid–carbon nanotube, 64.0% (w/w) o-nitrophenyl octylether, and 32.0% (w/w) polyvinyl chloride. The developed sensor displayed a linear response in the copper (II) concentration ranging from 1.0?×?10^–6 to 1.0?×?10^–1 M with a correlation coefficient of 0.9993 and a slope of 29.8?±?0.6?mV/decade of activity. The response time, detection limit, and pH working range were determined to be 4?s, 3.8?×?10^–7 M and 4.0–8.0, respectively. The developed sensor showed highly selective and satisfactory potentiometric response for the determination of copper (II) in a Turkish coin.     

The nature of active centers of a polymeric catalase analog

The decomposition of hydrogen peroxide by a polymer complex of Fe³⁺ and poly(acrylic acid) partially amidated by diethylenetriamine has been studied. The molecular mechanism of catalysis is discussed. The rate constant of the reaction is k = 6.9 × 10⁷ exp {?2.300/RT}. Decomposition of hydrogen peroxide proceeds via activation by the diethylenetriamine which is a cofactor.     

A ratiometric fluorescent probe for zinc ions based on the quinoline fluorophore

A ratiometric fluorescent zinc probe 1 of carboxamidoquinoline with a carboxylic acid group was designed and synthesised. Probe 1 exhibits high selectivity for sensing Zn²⁺; about a 13-fold increase in fluorescence emission intensity and an 82?nm red-shift of fluorescence emission are observed upon binding Zn²⁺ in EtOH/H₂O (1?:?1, V/V) solution. The ratiometric fluorescence response is attributed to the 1?:?1 complex formation between probe 1 and Zn²⁺ which has been utilised as the basis for the selective detection of Zn²⁺. The analytical performance characteristics of the proposed Zn²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Zn²⁺ from 2.0?×?10^?6 to 5.0?×?10^?5?mol?L^?1 and the detection limit is 2.7?×?10^?7?mol?L^?1. The determination of Zn²⁺ in both tap and river water samples shows satisfactory results.     

Synthesis of a novel crosslinked superabsorbent copolymer with diazacyclooctadecane crown ether and its sorption capability

A novel crosslinked poly(acrylic acid-copolymer-Kryptofix-22-DM) superabsorbent copolymer, poly(AA-co-Kry22-DM), was synthesised by the reaction of 4,13-dimethylacryloyl-1,7,10,16-tetraoxa-4,13-diazacyclooctadecane (Kyrptofix-22-DM) and acrylic acid (AA). Characterisation of the polymers was achieved by FTIR and ¹H NMR techniques. Sorption capacity of the crosslinked poly(AA-co-Kry22-DM) superabsorbent copolymer was investigated for Pb²⁺, Cu²⁺, Cr³⁺, Cd²⁺, Mn²⁺, Zn²⁺, and Ni²⁺ heavy metal ions at different pH values using Freundlich and Langmuir isotherms. Swelling ratio, q_v, and distribution ratio, log D, values of the crosslinked poly(AA-co-Kry22-DM) superabsorbent copolymer were calculated at various pH values.     

Multi-component hydrogen-bonding salts formed between imidazole and aromatic acids: Synthons cooperation and crystal structures

Imidazole base was crystallized with different aromatic carboxylic acids 2,4-dihydroxybenzoic acid, 5-chlorosalicylic acid, and 1,8-naphthalic acid, affording three new binary molecular organic salts of [(C 3 H 5 N 2 + )·(C 7 H 5 O 4 )] (1), [(C 3 H 5 N 2 + )·(C 7 H 4 O 3 Cl )] C 7 H 5 O 3 Cl (2), and [(C 3 H 5 N 2 + ) (C 12 H 7 O 4 )] (3). Proton transfer occurs from the COOH of carboxylic acid to nitrogen of imidazole in all complexes (1-3), leading to the hydrogen bond N-H…O in all structures. To our knowledge, the recognition pattern between the carboxylic acid group and imidazole (acid-imidazole synthon) is less well-studied so far. The cooperation among COOH, COO and imidazolium cation functional groups for the observed hydrogen bond synthons is examined in the three structures. Generally, the strong N-H…O and O-H…O hydrogen bonds define supramolecular architecture and connectivity within chains, while weaker C-H…O hydrogen bonds play the dominant role in controlling the interactions between layers in these novel organic salts. Thermal stability of these compounds has been investigated by thermogravimetric analysis (TGA) of mass loss.     

Poly(4-vinylpyridine-co-aniline)-modified electrode—synthesis, characterization, and application as cadmium(II) ion sensor

A poly(4-vinylpyridine-co-aniline) (poly(4VP-co-Ani))-based solid-state ion sensor for cadmium (Cd) was developed. This was obtained from studies done on a number of selected monomers electropolymerized onto a poly(4vinylpyridine) (P4VP)-modified graphite pencil rod, surface characterizing them and then analyzing their performances as a Cd(II) ion sensor. Among them, the membrane of poly(4VP-co-Ani) at a mole ratio of 0.05:0.15 was found to be the best. The fabricated poly(4VP-co-Ani) solid-state electrode had a linear response of 1?×?10^?6 to 1?×?10^?2?M Cd²⁺, slope of 29.4?±?0.5 mV decade^?1, detection limit of 7.94?×?10^?7?M Cd²⁺, and response time of 15 s at pH 4.5–8.5 with excellent selectivity. The sensor was operationally stable within a period of 3 months. The proposed sensor was tested for determination of Cd²⁺ in environmental, plant, and pharmaceutical samples. The analyses were comparable to the standard atomic absorption spectrophotometric method.     

Ultrastretchable,Tough, and Notch‐Insensitive Hydrogels Formed with Spherical Polymer Brush Crosslinker

Spherical polymer brushes, poly(acrylic acid) (PAA)‐grafted polystyrene nanoparticle (PAA@PS), are employed as the macro‐crosslinker to prepare PAA hydrogels. Benefitting from the innumerable hydrogen bonds between highly entangled PAA chains both in bulk and on the polymer brush, the PAA/PAA@PS hydrogels combine desirable stretchability, toughness, and notch‐insensitivity. The uniaxial tensile tests show a very high fracture elongation up to 9.1 × 10³% while the fracture toughness reaches 3.0 MJ m⁻³ and the maximum swelling ratio of the hydrogel can be 2.0 × 10³ as well. After being loaded with silver nanoparticles, the PAA/PAA@PS hydrogels are employed as a recyclable catalyst successfully.     

A "turn-off" luminescence resonance energy transfer aptamer sensor based on near-infrared upconverting NaYF4:Yb3+,Tm3+ nanoparticles as donors and gold nanorods as acceptors

Near-infrared upconverting NaYF₄:Yb^3*,Tm^3* nanophosphors modified with poly（acrylic acid） were prepared and characterized by transmission electron microscopy and luminescence spectroscopy.Based on the observed overlap between the emission spectrum of the NaYF₄:Yb^3*,Tm^3* nanophosphors and the absorption spectrum of the gold nanorods,we believe that a new "turn-off luminescence resonance energy transfer aptamer sensor was constructed for sensing thrombin in near-infrared region.     

Flow injection determination of hydrogen peroxide using diperiodatoargentate- and diperiodatonickelate-luminol chemiluminescence

A novel chemiluminescence (CL) method for the determination of hydrogen peroxide is described. Method is based on the transition metals in highest oxidation state complex, which include diperiodatoargentate (DPA) and diperiodatonickelate (DPN) and show excellent sensitisation on the luminol-H₂O₂ CL reaction with low luminol concentration in alkaline medium. In particular, the sensitiser which was previously reported (such as Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Cr³⁺, KIO₄, K₃Fe(CN)₆ etc.) to be unobserved CL due to poor sensitisation with such low concentration of luminol which makes the method hold high selectivity. Based on this observation, the detection limits were 6.5?×?10^?9?mol?L^?1 and 1.1?×?10^?8?mol?L^?1 hydrogen peroxide for the DPN- and DPA-luminol CL systems, respectively. The relative CL intensity was linear with the hydrogen peroxide concentration in the range of 2.0?×?10^?8–6.0?×?10^?6?mol?L^?1 and 4.0?×?10^?8–4.0?×?10^?6?mol?L^?1 for the DPN- and DPA-luminol CL systems, respectively. The proposed method had good reproducibility with a relative standard deviation of 3.4% (8.0?×?10^?7?mol?L^?1, n?=?7) and 1.0% (2.0?×?10^?6?mol?L^?1, n?=?7) for the DPN- and DPA-luminol CL systems, respectively. A satisfactory result has been gained for the determination of H₂O₂ in rainwater and artificial lake water by use of the proposed method.     

Theoretical study on a chemosensor for fluoride anion‐based on a urea derivative

The sensing mechanism of the N‐Phenyl‐N′‐(3‐quinolinyl)urea (PQU) chemosensor for fluoride anion has been investigated by density functional theory/time‐dependent density function theory. The double intermolecular hydrogen bonds are formed between the three anions (X^??F^?, AcO^?, Cl^?) and the urea fragment of PQU. In the S₀ states, the H_b? X^? hydrogen bonds are slightly stronger than the H_a? X^? hydrogen bonds and the fluoride‐induced deprotonation occurs at the N? H_b position rather than at the N? H_a position. Consequently, the absorption peaks, including an intramolecular charge transfer transition and a ππ* transition, are significantly red‐shifted. Thermodynamic calculations confirm that the deprotonation in the ground state is favorable in energy only when excess fluoride anion exists. Along with the S₀ → S₁ transition, the H_a? X^? hydrogen bonds strengthen and the H_b? X^? hydrogen bonds weaken. However, the emission spectra of [PQU‐H_b]^?, instead of [PQU‐H_a]^?, are observed upon addition of fluoride anion. © 2013 Wiley Periodicals, Inc.     

Polyelectrolyte effects on the quenching of pyrene fluorescence in solutions of a pyrene substituted poly(acrylic acid)

The quenching of pyrene fluorescence by nitromethane, Tl⁺, Cu²⁺, I^?, and 4-dimethylaminopyridine (DMAP) in aqueous solutions of a pyrene substituted poly(acrylic acid) ( 1 ) was influenced by the “polyelectrolyte effect” of 1 . The efficiency of quenching in solutions of 1 was measured in terms of the Stern–Volmer constants for dynamic and static quenching which were obtained from comparison of the intensity and lifetime of pyrene fluorescence in solutions of 1 and a monomer model compound. The efficiency of quenching in solutions of 1 was always greater at high pH ( 9 ) in comparison to that at low pH ( 4 ). The ionization of carboxylic groups in 1 caused an expansion of the polymer mainchain and concomitant exposure of the pyrene molecules to the aqueous phase and quencher. The polyanion domain of 1 favored the condensation of cationic quenchers and could account for very efficient quenching in case of Cu²⁺ and Tl⁺. A very efficient quenching of pyrene fluorescence in solutions of 1 by DMAP at high pH was attributed to the hydrophobic interactions of DMAP and pyrene moiety. The iodide ions were less efficient quenchers of pyrene fluorescence due to electrostatic repulsion from the polyanion. The efficiency of quenching by nitromethane was not significantly affected by ionization of the carboxylic groups in 1 .     

Polymeric bis(phosphonomethyl­carboxylato)calcium(II) at 85 K

In the crystal structure of the title compond, alternatively called poly[calcium(II)‐di‐μ‐carboxymethylphosphonato], [Ca(C₂H₄O₅P)₂]_n or [Ca(H₂AP)₂]_n, one of the phosphonate O atoms of the phosphonocarboxylate monoanion lies nearly antiperiplanar (ap) to the carboxylic acid C atom. The phosphonate P atom is located −sc and +ac relative to the carboxylic acid O atoms. The overall structure has a layered architecture. The Ca²⁺ cations lie on a twofold axis and are bridged by the phosphonate O atoms to form chains along the c axis, giving layers parallel to (100). There are medium‐strength O—H⃛O and C—H⃛O hydrogen‐bonding interactions stabilizing the layers, and O—H⃛O hydrogen bonds connect adjacent layers.     

Synthesis and Crystal Structures of [(Nicotinic Acid)2H]+I-, [(2-Amino-6-methylpyridine)H]+(NO3)-, and the 1:1 Complex Between 1-Isoquinoline Carboxylic Acid (Zwitter Ion) and L-Ascorbic Acid Assembled via Hydrogen Bonds

Summary. Three new complexes, namely [(nicotinic acid)₂H]⁺I^–, [(2-amino-6-methylpyridine)H]⁺ (NO₃)^–, and the 1:1 complex between 1-isoquinoline carboxylic acid (zwitter ion form) and L-ascorbic acid were synthesized. The IR spectra revealed different types of hydrogen bonds in these compounds. The X-ray structure determination has shown the first compound to consist of a packing of [(nicotinic acid)₂H]⁺ cations and I^– anions. In the dimeric cation the two nicotinic acid molecules (zwitter ions) are connected through hydrogen bonds (O–HO). Each dimer is further engaged in other hydrogen bonds with adjacent dimers giving 2D layers. The I^– ion is located at the inversion center. In the second compound the cation and anion are connected via hydrogen bonds formed between oxygen atoms of the NO₃ ^– anion and NH and NH₂ of the cation generating a layer structure. All atoms are coplanar on mirror planes. In the 1:1 complex the two molecules are connected through hydrogen bonds formed between the two oxygen atoms of the carboxylate group of 1-isoquinoline carboxylic acid (zwitter ion) and the oxygen atoms of the two adjacent hydrogen groups of the L-ascorbic acid molecule. These complex molecules are engaged in other hydrogen bonds with each other forming a 2D system normal to the long b-axis of the unit cell.