Insight into the binding of divalent cations to Sepia eumelanin from IR absorption spectroscopy

IR absorption spectroscopy is used to examine the binding of the divalent cations Mg(II), Ca(II), Zn(II) and Cu(II) to melanin granules isolated from the ink sacs of Sepia officinalis. The functional groups of the melanin granules interacting with the bound metal ions are deduced by examining the effect of metal concentration on transition frequencies associated with the COOH, NH and OH moieties of the pigment. The coordinating groups vary with metal ion and with concentration. For the experimental conditions used (initial solution pH of 4, ionic strength of 100 mM and a melanin concentration of 1 mg mL(-1)) Mg(II), Ca(II) and Zn(II) bind to carboxylate groups and Cu(II) binds predominantly to phenolic (catechol) groups However, at a concentration of 10 mM Cu(II) also shows evidence of binding to carboxylate and amine groups, reflecting a secondary binding site that becomes populated as the catechol sites are depleted.     

Preparation, characterization and metal sorption studies of a Chrome-Azurol-S-loaded anion-exchange resin

Chrome Azurol S (CS) was mobilized on an strongly basic anion-exchange resin (Dowex 2 x 4, in Cl(-) form) by batch equilibration. The modified resin was stable in acetate buffer solution and in 0.1 M HCl and H(2)SO(4), but it was readily degraded with 2-6 M HCl and HNO(3). Retention of Ba(II), Sr(II), Ca(II), Mg(II), Al(III), Cr(III), Zn(II), Fe(III), Ti(IV), Mn(II), Co(II), Ni(II), Cu(II), Cd(II) and Pb(II) was studied using the batch equilibration method. The uptake and recovery yields were determined by using inductively-coupled plasma atomic emission spectroscopy (for Mg, Al, Cr, Ti, Fe, Mn, Ni, Zn, Cu, Cd and Pb) and atomic absorption spectrophotometry (for Ba, Sr, Ca and Co). The optimum pH value was established for performing a selective separation of Al(III) from the other metal ions. The sorption capacities of the CS-loaded resing for Al(III), Cr(III), Mg(II) (at pH 6), Fe(III) (at pH 5) and Ti(IV) (at pH 4) were 14, 2.9, 0.3, 3 and 3.9 mumoles g(-1) respectively. On this basis a method for separating Al(III) from other cations was established.     

Metal ion-promoted fabrication of melanin-like poly(L-DOPA) nanoparticles for photothermal actuation

Melanin-inspired polymers are currently the focus of growing interest for a wide range of applications ranging from energy to biomedical area. Whilst researchers have made numerous attempts to prepare and utilize polydopamine nanoparticles(PDA NPs), they have made limited progress in developing and discovering another typical functional mimic of natural melanin, poly(levodopa)(P(L-DOPA)) NPs, probably due to the lack of facile synthetic strategies towards satisfactory structural and functional control of melanin-like NPs. Herein, we reported a one-pot preparation method towards P(L-DOPA) NPs with good yields and controllable size/property in an aqueous solution assisted by various metal ions(i.e., Ni(II), Mg(II), Ca(II), Fe(III), Mn(II), Co(II), Zn(II) and Cd(II)). Interestingly, the resulting P(L-DOPA) NPs exhibited enhanced light absorption and photothermal behaviors compared with well-established PDA NPs, which can be employed to further fabricate kinds of photothermal composite actuators with promising performances such as folding, switching, and forward-moving. This study offers a facile and robust way to synthesize new synthetic melanins beyond PDA, and facilitates further functional discovery and evolution of melanin-inspired polymers and composites.     

Preparation, characterization and application of an cellulose ion-exchanger with acetoacetamide functional groups

Summary A method is described for functionalizing acetoacetamide chelating groups onto microcrystalline cellulose (Cell-AcAc). This material shows a significant affinity for Fe(III), Cu(II) and U(VI) and no or very less affinity for the M(I) ions (M=Na, K), M(II) ions (M= Mg, Ca; Fe, Co, Ni, Zn), La(III) and Y(III) including Th(IV). The obtained K _d values offer a column separation method for U(VI) ions from the rest of above-mentioned metal ions except Fe(III). Cell-AcAc and its Cu(II) complexes are characterized by means of FT-IR spectra.

---

Darstellung, Charakterisierung und Anwendung von Ionenaustauschmaterial aus Cellulose mit chemisch gebundener Acetoacetamid-Gruppe

Zusammenfassung Die Darstellung von immobilisiertem Acetoacetamid auf mikrokristallinem Cellulosepulver (Cell-AcAc) wird beschrieben. Der Ionenaustauscher Cell-AcAc hat eine ausgeprägte Affinität für Fe(III), Cu(II) and U(VI), aber nahezu keine für die M(I)-Ionen (M=Na, K) M(II)-Ionen (M=Mg, Ca; Fe, Co, Ni, Zn), La(III), Y(III) sowie Th(IV). Die erhaltenen K _d-Werte ermöglichen für U(VI)-Ionen eine quantitative säulen-chromatographische Trennung von den anderen genannten Kationen mit Ausnahme von Fe(III). Das Ionenaustauschmaterial Cell-AcAc und sein Cu(II)-Komplex wurden durch FT-IR-Spektren charakterisiert.

     

Sensing of Fe(III) ion via turn-on fluorescence by fluorescence probes derived from 1-naphthylamine

Fluorescence probes NA1 and NA2 derived from 1-naphthylamine (NA) as fluorophore have been synthesized and characterized by different spectroscopic studies. Identification behaviour of these probes towards various metal ions has been investigated. Both the fluorescent probes are selective as well as sensitive towards Fe(III) ion. Novel fluorescence probe NA2 afforded turn-on fluorescence behaviour for Fe(III) ion over other metal ions such as Ca(II), Mg(II), Mn(II), Fe(II), Co(II), Fe(III), Ni(II), Cu(II), Zn(II) and Hg(II).     

Organic acid solutions in the chromatography of inorganic ions. VII. Cation exchange of Mg(II), Ca(II), Sr(II), Ba(II), Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II) and Fe(III) in succinate media

Summary The cation-exchange behaviour of Mg(II), Ca(II), Sr(II), Ba(II), Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II) and Fe(III) in succinate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the NH ₄ ⁺ form. As examples separations of Cd(II)/Co(II), Cd (II)/Ni(II), Fe(III)/Cu(II)/Ni(II) and Mg(II)/Ca(II)/Sr(II)/Ba(II) have been achieved.This work was supported by C.N.R. of Italy.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

Separation and gravimetric determination of barium using sulfadimethoxin salicylaldimine

Sulfadimethoxin salicylaldimine (SUDMSA) has been found to be a wide spectrum precipitant of a number of metal ions. The chelates are granular, stable, and quantitatively formed. SUDMSA has been utilized for the gravimetric determination of barium in the presence of Ca(II), Sr(II), Fe(III), As(III), Sb(III), Cr(III), Ag(I), Cu(II), Ni(II), Co(II), Mn(II), Cd(II), Zn(II), Hg(II), Pd(II), Mg(II), Tl(I), ZrO(II), Sn(IV). The St. of the chelate was confirmed by elemental analysis and IR data.     

Tuning the selectivity of two chemosensors to Fe(III) and Cr(III)

Two rhodamine-based chemosensors (1 and 2) were designed, and their sensing behavior toward metal ions was investigated by fluorescence spectroscopies. 1 and 2 achieved tuning the selectivity to Fe(III) and Cr(III) in 100% aqueous solution, whereas other ions including Cd(II), Co(II), Cu(II), Ni(II), Zn(II), Mg(II), Ba(II), Pb(II), Na(I), and K(I) induced basically no spectral change, which constituted a Fe(III)-selective and a Cr(III)-selective fluorescent chemosensor, respectively.     

高血压患者血清中八种金属元素的

通过对48名高血压患者和52名正常健康人进行血清中八种金属元素的检测,探讨了人体必需金属元素的含量变化是否与患高血压疾病有直接的关系。采用离心分离的方法处理样品,用火焰原子吸收分光光度法检测样品中钙、镁、钾、钠、锌、铜、铁和锰的水平含量。结果表明,患高血压组血清Na、Mg、Zn、Fe、Mn的水平含量均高于健康对照组,其中Na、Mn两组间比较差异显著（P＜0．05）,Zn、Fe两组间比较差异非常显著（P＜0．01）,Mg两组间比较差异无显著性（P＞0.05);患高血压组血清Na／K比值均高于健康对照组,Ca/Mg、Cu/Zn比值均低于健康对照组。检测的八种金属元素在人体内的含量多少与患高血压疾病有一定的关系。提示适当增补体内的Ca、K、Cu和Mg含量,减少Na的过多摄入,科学控制Zn、Fe、Mn的增加,注意体内Na/K、Ca/Mg和Cu/Zn比值的平衡关系,降低Na/K比,提高Cu/Zn比,补Ca的同时一定要注意适当补充Mg,保持体内各元素间的相互依赖关系,有利于高血压病的预防和治疗。     

Amberlite XAD-7 impregnated with Xylenol Orange: a chelating collector for preconcentration of Cd(II), Co(II), Cu(II), Ni(II), Zn(II) and Fe(III) ions prior to their determination by flame AAS

A new chelating resin, Xylenol Orange coated Amberlite XAD-7, was prepared and used for preconcentration of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) prior to their determination by flame atomic absorption spectrophotometry. The optimum pH values for quantitative sorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) are 4.5-5.0, 4.5, 4.0-5.0, 4.0, 5.0 and 5.0-7.0, respectively, and their desorptions by 2 mol L(-1) HCl are instantaneous. The sorption capacity of the resin has been found to be 2.0, 2.6, 1.6, 1.6, 2.6 and 1.8 mg g(-1) of resin for Cd, Co, Cu, Fe, Ni and Zn, respectively. The tolerance limits of electrolytes, NaCl, NaF, NaI, NaNO3, Na2SO4 and of cations, Mg2+ and Ca2+ in the sorption of the six metal ions are reported. The preconcentration factor was between 50 and 200. The t1/2 values for sorption are found to be 5.3, 2.9, 3.2, 3.3, 2.5 and 2.6 min for the six metals, respectively. The recoveries are between 96.0 and 100.0% for the different metals at preconcentration limits between 10 to 40 ng mL(-1). The preconcentration method has been applied to determine the six metal ions in river water samples after destroying the organic matter (if present in very large amount) with concentrated nitric acid (RSD < or = 8%, except for Cd for which it is upto 12.6%) and cobalt content of vitamin tablets with RSD of approximately 3.0%.     

Composite dextran gels as size exclusion chromatography stationary phases

Composite dextran gels have been prepared using epichlorohydrin as the covalent cross-linker and a modifying agent, typically a polyvalent metal compound creating complexes with the residual OH groups of the polymer matrix. Two series of gels were prepared and investigated by a comparison of their swellabilities in water as well as the separation characteristics when used as size exclusion chromatography (SEC) stationary phases. The gels were in situ modified with sulfates of Mg(II), Zn(II), Co(II), Ni(II), Cu(II), Mn(II), Al(III), Fe(III) and tetraethylorthotitanate or with the oxides: MgO, ZnO, Al₂O₃, TiO₂ and SiO₂. Large differences in the swellabilities and SEC calibration dependences for poly(ethylene glycol) standards in an aqueous eluent have been found and discussed.     

Indirect cerimetric determination of gold at the milligram level

Summary A rapid volumetric method has been worked out for the indirect determination of 0.25–2.5 mg of gold in presence of many common ions. It is based on the reduction of gold(III) to metal with excess of cobalt(II) in the presence of 1,10-phenanthroline at pH 3 and 50°, and estimation of the unreacted cobalt(II) in the filtrate by visual, potentiometric or biamperometric titration with standardized cerium(IV) sulphate solution. It has been found that there is no interference from Ni(II), Pb(II), Zn(II), Cd(II), Mn(II), Mg(II), Ca(II), Al(III), Cr(III), Ti(IV), V(V) and W(VI). Interference due to Pd(II) and Ag(I) can be eliminated. Fe(III), Cu(II), Mo(VI), Hg(II) and Pt(IV) interfere, even present in small amounts.

---

Zusammenfassung Ein schnelles maßanalytisches Verfahren zur indirekten Bestimmung von 0,25–2,5 mg Gold in Gegenwart vieler Ionen wurde ausgearbeitet. Es beruht auf der Reduktion zu metallischem Gold mit überschüssigem Kobalt(II) in Anwesenheit von 1,10-Phenanthrolin bei pH 3 und 50°. Die Rückbestimmung des unverbrauchten Kobalts im Filtrat erfolgt durch potentiometrische oder biamperometrische Titration mit Cer(IV)sulfat. Ni(II), Pb(II), Zn(II), Cd(II), Mn(II), Mg(II), Ca(II), Al(II), Cr(III), Ti(IV), V(V) und W(VI) stören nicht. Eine Störung durch Pd(II) oder Ag(I) kann man ausschalten. Fe(III), Cu(II), Mo(VI), Hg(II) und Pt(IV) stören auch in geringen Mengen.

     

Coordination complexes bearing potentially tetradentate phenoxyamine ligands

A series of metal complexes containing potentially tetradentate phenoxyamine ligands is described. The ligands are found to bind to main-group metals and first-row transition-metal centres with variable denticity depending upon the requirements of the particular metal centre. Bidentate [Al(III)], tridentate [Mg(II), Ca(II), Zn(II)] and tetradentate [K(I), Cr(III), Fe(II), Co(II)] binding modes have been established unambiguously through single-crystal X-ray structure determinations.     

Facile synthesis and reactions of some olefin-substituted acetylacetonate complexes

Synthesis of transition metal complexes of olefin-substituted acetylacetones has been effected by reaction of nonaqueous solutions of substituted acetylacetones with the metal salt in the presence of Zn or Mg. 3-Allylacetylacetonates of Be(II), Cu(II), Ni(II), Fe(III), Co(II), Pd(II) and Zn(II) have thus been synthesized in quantitative yields. 3-Propylideneacetylacetone, which exists mainly in the keto form, afforded the corresponding 3-propenylacetylacetonates in which 3-propylideneacetylacetone has rearranged to 3-propenylacetylacetone which has a greater probability of existing in the enol form, thus making its reaction with metal ions favorable. Metal–metal exchange reactions of transition metal salts with olefin-substituted Zn or Mg acetylacetonates provide yet another route for the synthesis of transition metal olefin-substituted acetylacetonates. The homogeneous catalytic hydrogenation of the olefin moiety in olefin-substituted metal acetylacetonates could be achieved by a Pt/Sn catalyst.     

Quantitative separation of calcium from magnesium,aluminium, iron(III) and many other elements by cation-exchange chromatography in methanolic hydrochloric acid on a macroporous resin

Calcium can be separated from Mg, Al, Cu(II), Fe(III), Ga, Zn, Mn(II), Co(II), U(VI) and Ti(IV) by cation-exchange chromatography on a column of AG MP-50 macroporous resin. Sr, Ba, Sc, Y, the lanthanides, Zr, Hf and Th are retained together with calcium. The separation factor for the Ca—Mg pair in 3 M HCl containing 50% methanol is about 20 which is considerably larger than those obtained by other ion-exchange procedures. Separations with the cation-exchange resin are sharp and quantitative. A column containing only 2 g (5.4ml) of resin is sufficient to separate up to 0.2 mmol of calcium from 2 mmol of magnesium and larger amounts of Fe(III), Cu(II) and Zn. On a 10-g column, up to 2.5 mmol of calcium can be separated easily from similar and larger amounts of other elements. Distribution coefficients for calcium and magnesium with variation of cross-linkage and variation of methanol concentration are presented, together with relevant elution curves and results for synthetic mixtures.     

Thiacalix[4]arenetetrasulfonate as specific pre-column chelating reagent for nickel(II) ion in kinetic differentiation mode high-performance liquid chromatography

Thiacalix[4]arenetetrasulfonate (TCAS) has been examined as a pre-column chelating reagent for the determination of trace metal ions by kinetic differentiation mode (KD) ion-pair reversed-phase high-performance liquid chromatography (HPLC) with spectrophotometric detection. Among 14 kinds of common metal ions tested here, viz. Al(III), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Hg(II), Mg(II), Mn(II), Ni(II), Pb(II), V(V), and Zn(II) ion, only Ni(II) ion was detected as the TCAS chelate in the HPLC separation stage in spite of TCAS forming the chelates with various metal ions except for Al(III), Ca(II), and Mg(II) at the pre-column chelation stage. The undetected metal-TCAS chelates seemed to be dissociated on an HPLC column where no added TCAS was present in the mobile phase because of their kinetic unstability. The calibration graph for Ni(II) ion gave a wide linear dynamic range (40-20,000 nM) with the very low detection limit (DL) (3σ base-line fluctuation) to be 5.4 nM (0.32 ng ml⁻¹). The practical applicability of the KD-HPLC method with TCAS was demonstrated with the determination of trace Ni in coal fly ash.     

Synthesis, characterization and applications of pyrocatechol modified amberlite XAD-2 resin for preconcentration and determination of metal ions in water samples by flame atomic absorption spectrometry (FAAS)

A new chelating resin is prepared by coupling Amberlite XAD-2 with pyrocatechol through an azo spacer, characterized (by elemental analysis, IR and TGA) and studied for preconcentrating Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) using flame atomic absorption spectrometry (FAAS) for metal monitoring. The sorption is quantitative in the pH range 3.0-6.5, whereas quantitative desorption occurs instantaneously with 2 M HCl or HNO(3) The sorption capacity has been found to be in the range 0.023-0.092 mmol g(-1) of resin. The loading half time (t(1/2)) is 1.4, 4.8, 1.6, 3.2, 2.3 and 1.8 min, respectively for Cd, Co, Cu, Fe, Ni and Zn. The tolerance limits of electrolytes NaCl, NaBr, NaNO(3), Na(2)SO(4) and Na(3)PO(4) in the sorption of all the six metal ions (0.2 mug ml(-1)) are reported. The Mg(II) and Ca(II) are tolerable with each of them (0.2 mug ml(-1)) up to a concentration level of 0.01-1.0 M. The enrichment factor has been found to be 200 except for Fe and Cu for which the values are 80 and 100, respectively. The lowest concentration of metal ion for quantitative recovery is 5, 10, 20, 25, 10 and 10 mug l(-1) for Cd, Co, Cu, Fe, Ni and Zn, respectively. The simultaneous determination of all these metal ions is possible and the method has been applied to determine all the six metal ions in tap and river water samples (RSD相似文献   

The Study of Influence of Metal Ions on Thermal Decomposition of Humic Acids

Investigations of the influence of the following metal ions: Ca, Mg, Ba, Cr, Mn,Co, Ni, Fe(II), Fe(III), Cu, Zn, Cd, Pb, Hg, Al and Ag on thermal decomposition of humic acids were carried out. Metal-humic compounds were obtained by ion exchange method and by complexing of metal cations on humic acids. For the investigations of thermal decomposition TG and DTA were used. Presence of metal ions in structure of humic acids mostly increases intensity of their thermal decomposition particularly the Hg and Cu ions.They shift this process to lower temperatures 100–300°C. Mass loss of organic matter in this temperature range in humic-mercury compounds are higher by more than 35%, and in humic-copper compounds are higher by more than 20% compared with the mass loss of humic acids itself. Ni and Co ions also increase the intensity of thermal decomposition of humic acids, but Ca, Ba and Mg ions inhibit that process. This revised version was published online in July 2006 with corrections to the Cover Date.     

微晶酚酞富集-分光光度法测定痕量Zn(II)

建立了一种利用修饰有结晶紫(CV^＋)的微晶酚酞作为固态吸附剂分离富集溶液中痕量Zn(II)的新方法, 富集后的Zn(II)含量可直接用光度法测定. 控制一定条件, Zn(II)能与常见阳离子Ni(II), Cd(II), Al(III), Ca(II), Mg(II), Co(II), Mn(II), Cu(II), Pb(II), Fe(III)等完全分离, 且富集时基本不受, , Br^－, Cl^－, I^－,等阴离子影响. 微晶酚酞对Zn(II)的吸附容量为25.8 mg/g; 富集因数可达200倍, 回收率在97.7%～102%之间, RSD小于2.7%. 该方法已成功应用于实际水样中Zn(II)的富集测定, 结果令人满意.