Preparation of dendrimer-like polyamidoamine immobilized silica gel and its application to online preconcentration and separation palladium prior to FAAS determination

A amino-terminated G 4.0 dendrimer-like polyamidoamine (PAMAM) immobilized silica gel (PAMAMSG) was prepared with a divergent method by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups; and (2) amidation of the resulting esters with ethylenediamine (EDA) from γ-aiminopropyl silica gel (APSG) core. It was then used for the first time as microcolumn packing for the flame atomic absorption spectrometry (FAAS) determination of trace or ultra trace Pd(II), after flow injection (FI) online preconcentration and separation process. A limit of detection (LOD) of 3.9 ng ml⁻¹ was achieved when 0.200 μg ml⁻¹ Pd(II) was preconcentrated in 0.2 mol l⁻¹ HCl medium with a sampling flow rate of 6.0 ml min⁻¹ for 60 s and the relative standard deviation (R.S.D.) was 1.7%. The proposed method was successfully used for the determination of Pd in two metallurgical samples.     

Electrothermal atomic absorption spectrometric determination of lead in high-purity reagents with flow-injection on-line microcolumn preconcentration and separation using a macrocycle immobilized silica gel sorbent

A fully automated procedure for the determination of ng l⁻¹ amounts of lead has been developed using flow injection (FI) online column preconcentration coupled with electrothermal atomic absorption spectrometry (ETAAS). The proposed FI manifold and its operation make possible the introduction of the total eluate volume into the graphite atomizer, avoiding the necessity for optimization of subsampling the eluate. The interference of other heavy metal ions due to competition for active sites of the sorbent is overcome using a highly selective macrocycle immobilized on silica gel (Pb-02). Lead is adsorbed on a microcolumn (50 μl) packed with Pb-02, and after washing the column with dilute nitric acid, air is introduced to remove all solution from the column and connecting tubing. The sorbed analyte is then eluted quantitatively into the graphite tube atomizer, preheated to 100°C, with 36 μl of ETDA solution (0.035 mol l⁻¹, pH 10.5), propelled by air in order to minimize dispersion. The collection efficiency was 77% and with a sample loading flow rate of 3 ml min⁻¹ and a 60 s preconcentration time, the enhancement factor was 77 and the throughput was 17 samples per hour. The relative standard deviation (n = 10) at the 300 ng l⁻¹ level was 2.7%, and the detection limit (3σ) was 0.4 ng l⁻¹. No interference from heavy metals was observed, but ions of Ba²⁺, Sr²⁺ and K⁺ were found to interfere when the concentration ratios of interferent to lead exceeded values of 2000, 20 000 and 200 000, respectively. Quantitative recovery of lead was achieved from sodium, magnesium, aluminum, lanthanum and heavy metal salt solutions. The high selectivity and sensitivity, combined with extremely low blank values, make the proposed technique particularly attractive for the analysis of high-purity reagents, semiconductors and other high-purity materials. Results are presented for the determination of lead in some high-purity reagents.     

Salen impregnated silica gel as a new sorbent for on-line preconcentration of cadmium(II)

A new sorbent – salen impregnated silica gel – was prepared and characterised for application as a minicolumn packing for flow-injection on-line preconcentration of cadmium(II). The system was coupled with flame atomic absorption spectrometer (FI-FAAS). The optimal pH for Cd(II) sorption was in the range of 7.4–8.8 and nitric acid (1%, v/v) was efficient as eluent. Sorption was most effective within the sample flow rate up to 7?mL?min^?1. Sorption capacity of the sorbent found in a batch procedure was 26.3?µmol?g^?1 (2.95?mg?g^?1). Enrichment factor (EF) and limit of detection (LOD) obtained for 120-second loading time were 113 and 0.26?µg?L^?1, respectively. The sorbent stability in the working conditions was proved for at least 100 preconcentration cycles. The evaluated method was applied to Cd(II) determination in various water samples.     

Synthesis of xanthate functionalized silica gel and its application for the preconcentration and separation of uranium(VI) from inorganic components

Summary A new chelating solid extractant prepared by the chemical immobilization of xanthate on silica gel was characterized by Fourier transform infra red spectrometry (FTIR), thermogravimetric analysis (TGA) and microanalysis and used for the preconcentration and separation of uranyl ion prior to its determination by Arsenazo-III. The effect of pH, weight of the solid extractant, volume of the aqueous phase and the interference of neutral electrolytes, cations and anions on the determination of uranium, have been studied in detail to optimize the conditions for trace determination of uranium(VI). The accuracy of the developed procedure was tested by analyzing marine sediment (MESS-3) and soil (IAEA-SOIL-7) reference materials. The results obtained on analysis of soil and sediment samples are comparable to standard ICP-MS values.     

Synthesis of rhodanine-bonded silica gel and its application in the preconcentration and separation of noble metals

A silica gel based sorbent containing rhodanine as functional group (RDSG) was prepared. Its adsorption and separation characteristics for Ag(I), Au(III) and Pd(II) were studied by flow-injection (FI) on-line preconcentration. Influence of different experimental parameters such as acidity, eluent, co-existing ions were investigated. Trace amounts of Ag, Au and Pd could be efficiently adsorbed by rhodanine-bonded silica gel from acidic solution and eluted with thiourea solution. Common co-existing ions exhibited virtually no interference to the preconcentration and determination. The adsorption capacity of RDSG was 0.0352, 0.107 and 0.122 mmol/g for Ag, Au and Pd, respectively. Detection limits of 0.004, 0.022 and 0.019 microg/mL for Ag, Au and Pd, respectively, were achieved with a sampling time of 60 s at a flow rate of 5.0 mL/min. The relative standard deviation were 0.5%, 0.9% and 1.7% for 0.040 microg/mL Ag, 0.200 microg/mL Au and 0.300 microg/mL Pd. The sorption property did not change after 1,000 cycles of sorption-desorption. The contents of Ag and Au in three national certified ore samples and Pd in a secondary nickel alloy, an anode slime and a CoCl2 electrolytic solution were determined. The results showed good agreement with the certified values.     

Synthesis of rhodanine-bonded silica gel and its application in the preconcentration and separation of noble metals

A silica gel based sorbent containing rhodanine as functional group (RDSG) was prepared. Its adsorption and separation characteristics for Ag(I), Au(III) and Pd(II) were studied by flow-injection (FI) on-line preconcentration. Influence of different experimental parameters such as acidity, eluent, co-existing ions were investigated. Trace amounts of Ag, Au and Pd could be efficiently adsorbed by rhodanine-bonded silica gel from acidic solution and eluted with thiourea solution. Common co-existing ions exhibited virtually no interference to the preconcentration and determination. The adsorption capacity of RDSG was 0.0352, 0.107 and 0.122 mmol/g for Ag, Au and Pd, respectively. Detection limits of 0.004, 0.022 and 0.019 μg/mL for Ag, Au and Pd, respectively, were achieved with a sampling time of 60 s at a flow rate of 5.0 mL/min. The relative standard deviation were 0.5%, 0.9% and 1.7% for 0.040 μg/mL Ag, 0.200 μg/mL Au and 0.300 μg/¶mL Pd. The sorption property did not change after 1000 cycles of sorption-desorption. The contents of Ag and Au in three national certified ore samples and Pd in a secondary nickel alloy, an anode slime and a CoCl₂ electrolytic solution were determined. The results showed good agreement with the certified values.     

ICP-AES determination of trace rare earth elements in environmental and food samples by on-line separation and preconcentration with acetylacetone-modified silica gel using microcolumn.

A novel method of online microcolumn separation and preconcentration coupled to inductively coupled plasma atomic emission spectrometry (ICP-AES) with the use of acetylacetone-modified silica gel as packing material was developed for the determination of trace rare earth elements (REEs) in environmental and food samples. The main parameters affecting online separation/preconcentration, including pH, sample flow rate, sample volume, elution and interfering ions, have been investigated in detail. Under the optimized operating conditions, the adsorption capacity values for Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu were 25.65, 23.23, 24.01, 19.40, 22.89, 23.77, 24.40, 23.96, 25.58, 25.15, 24.86, 22.75, 16.05, 24.13, 26.51 and 27.93 mg g(-1), respectively. Detection limits (3sigma) based on three times standard deviations of the blanks by 8 replicates were in the range from 48 pg mL(-1) for Lu to 1003 pg mL(-1) for Sm. With 90 s preconcentration time and 10 s elution time, the enrichment factor was 10 and the sample frequency was 28 h(-1). The precisions (RSDs) obtained by determination of a 250 ng mL(-1) (n = 8) REEs standard solution were in the range from 1.7% for Y to 4.4% for Sm. The proposed method was successfully applied to the determination of trace REEs in pig liver, agaric and mushroom. To validate the proposed method, we analyzed three certified reference materials (GBW07401 soil, GBW07301a sediment, and GBW07605 tea leaves). The determined values were in a good agreement with the certified values. The method is rapid, selective, sensitive and applicable to the determination of trace REEs in biological and environmental samples with complicated matrix effects.     

Synthesis and nonisothermal reaction of a novel acrylonitrile-capped poly(propyleneimine) dendrimer with epoxy resin

A novel acrylonitrile-capped poly(propylene imine) dendrimer (PAN4) was synthesized and characterized with FTIR and ¹H-NMR. PAN4 and its precursor (poly(propylene imine) dendrimer (1.0GPPI) were employed to cure bisphenol A epoxy resin (DGEBA), and the nonisothermal reaction kinetics of DGEBA/PAN4 and DGEBA/1.0GPPI was systematically investigated using a differential scanning calorimeter (DSC) in a comparative way. The apparent activation energies determined with the Kissinger method were 59.7 kJ/mol for DGEBA/1.0GPPI and 53.9 kJ/mol for DGEBA/PAN4. Applied the Málek method, it was found that a two-parameter autocatalytic model (SB(m, n)) could well simulate the reaction rates, and further analysis of the reaction rate constants showed PAN4 could cure DGEBA at a greatly decreased rate by a factor a more than ten compared with 1.0GPPI control.     

Sorption of platinum on immobilized microorganisms for its on-line preconcentration and chemiluminescent determination in water samples

Fungi of the type Aspergillus sp. were immobilized on a cellulosic resin and used as a biosorbent for the on-line preconcentration and separation of Pt(IV) ions prior to their chemiluminescent determination via flow injection analysis. Biosorption and elution conditions were optimized, and the results compared to biosorbents based on the use of Chlorella vulgaris algae and Saccharomyces cerevisiae yeast in terms of preconcentration and selective retention of Pt(IV). The immobilized fungi presented here have a high potential for use in platinum biosorption. The procedure exhibits the currently lowest limit of detection (0.02 ng mL^?1 of Pt) and very high selectivity. The procedure was applied to the determination of Pt(IV) in river water, road run-off, and wastewater samples.

Preparation of platinum(II) sulfide complexes immobilized on silica

We report on preparation of silica-immobilized platinum(II) complexes of the [{SiO₂}O₂Si(CH₃)· (CH₂)₃SR]₂PtCl₂ type (R = Bu, Hex, or Bn; {SiO₂} = silica surface).     

Modified mesoporous silica materials for on-line separation and preconcentration of hexavalent chromium using a microcolumn coupled with flame atomic absorption spectrometry

A modified SBA-15 mesoporous silica material NH₂-SBA-15 was synthesized successfully by grafting γ-aminopropyl-triethoxysilane. The material was characterized using transmission electron microscopy (TEM) and Fourier transform infrared/Raman (FT-IR/Raman) spectroscopy, and used for the first time in a flow injection on-line solid phase extraction (SPE) coupled with flame atomic absorption spectrometry (FAAS) to detect trace Cr (VI). Effective sorption of Cr (VI) was achieved at pH 2.0 with no interference from Cr (III) and other ions and 0.5 mol L⁻¹ NH₃·H₂O solution was found optimal for the complete elution of Cr (VI). An enrichment factor of 44 and was achieved under optimized experimental conditions at a sample loading of 2.0 mL min⁻¹ sample loading (300 s) and an elution flow rate of 2.0 mL min⁻¹ (24 s). The precision of the 11 replicate Cr (VI) measurements was 2.1% at the 100 μg L⁻¹ level with a detection limit of 0.2 μg L⁻¹ (3 s, n = 10) using the FAAS. The developed method was successfully applied to trace chromium determination in waste water. The accuracy was validated using a certified reference material of riverine water (GBW08607).     

Speciation of chromium by selective separation and preconcentration of Cr(III) on an immobilized nanometer titanium dioxide microcolumn

Nanometer titanium dioxide immobilized on silica gel (immobilized nanometer-scale TiO2 particles) was prepared by a sol-gel method and characterized by X-ray diffraction and scanning electron microscopy. The adsorptive behavior of Cr(III) and Cr(VI) on immobilized nanometer TiO2 was assessed. Cr(III) was selectively sorbed on immobilized nanometer TiO2 in the pH range of 7-9, while Cr(VI) was found to remain in solution. A sensitive and selective method has been developed for the speciation of chromium in water samples using an immobilized nanometer TiO2 microcolumn and inductively coupled plasma atomic emission spectrometry. Under optimized conditions (pH 7.0, flow rate 2.0 mL/min), Cr(III) was retained on the column, then eluted with 0.5 mol/L HNO3 and determined by ICP-AES. Total chromium was determined after the reduction of Cr(VI) to Cr(III) by ascorbic acid. The adsorption capacity of immobilized nanometer TiO2 for Cr(III) was found to be 7.04 mg/g. The detection limit for Cr(III) was 0.22 ng/mL and the RSD was 3.5% (n = 11, c = 100 ng/ mL) with an enrichment factor of 50. The proposed method has been applied to the speciation of chromium in water samples with satisfactory results.     

Fluorimetric determination of uranium(VI) in waters by flow-injection analysis after preconcentration on a silica gel microcolumn

A method was developed for the selective determination of trace concentrations of uranium(VI) by flow-injection analysis (FIA) with fluorimetric detection. Uranium(VI) is selectively separated and/or pre-concentrated from a volume up to 20 ml on an activated silica gel microcolumn (2 x 40 mm) from a medium of 0.03M EDTA, 0.06M tartrate, and/or 0.05M NaF at pH = 9.3. After washing the column the uranium is eluted with a mixture of 1.33M sulphuric and phosphoric acids and determined with a relative standard deviation not exceeding 6% for concentrations in the range 10-250 mug/l. The detection limit was estimated to be 0.1-0.2 mug of uranium. The method has been verified on artificial water samples with high content of the interfering elements and applied to analysis of waste and natural waters.     

Study and application of a method for the determination of metallic elements by ICP-AES with preconcentration on an active carbon-silica gel microcolumn in a FI system

Using active carbon-silica gel as adsorbent and sodium diethyldithiocarbamate (NaDDTC) as chelating reagent in a flow injection system, an ICP-AES method has been developed for preconcentration and determination of trace metallic elements in high purity rare earth oxides. The experimental parameters such as pH, flow rate, amount of adsorbent, length of reaction coil and eluent acidity were optimized. At pH 4.6 Al,Cr,Cu,Fe,Pb,V,Zn could be preconcentrated, and subsequently determined by ICP-AES. This method can eliminate matrix effects. Its enrichment factors were 8.1–12.6 with detection limits in the ng/mL range and RSD of 2.3–5.0. This method was applied to the analysis of high purity of La₂O₃ and Eu₂O₃ with satisfactory results. Received: 24 April 1997 / Revised: 22 September 1997 / Accepted: 7 October 1997     

Study and application of a method for the determination of metallic elements by ICP-AES with preconcentration on an active carbon-silica gel microcolumn in a FI system

Using active carbon-silica gel as adsorbent and sodium diethyldithiocarbamate (NaDDTC) as chelating reagent in a flow injection system, an ICP-AES method has been developed for preconcentration and determination of trace metallic elements in high purity rare earth oxides. The experimental parameters such as pH, flow rate, amount of adsorbent, length of reaction coil and eluent acidity were optimized. At pH 4.6 Al,Cr,Cu,Fe,Pb,V,Zn could be preconcentrated, and subsequently determined by ICP-AES. This method can eliminate matrix effects. Its enrichment factors were 8.1–12.6 with detection limits in the ng/mL range and RSD of 2.3–5.0. This method was applied to the analysis of high purity of La₂O₃ and Eu₂O₃ with satisfactory results. Received: 24 April 1997 / Revised: 22 September 1997 / Accepted: 7 October 1997     

Chiral separation with novel (S)-biotin-bonded silica gel for liquid chromatography

Liquid chromatographic separation of enantiomers was accomplished using a chiral stationary phase (CSP) derived from (S)-biotin on silica gel. In both nonaqueous and aqueous media, this CSP (1) permitted separation of racemic amino acid derivatives based on hydrogen bonding with a urea moiety of the biotin moiety.     

聚N-异丙基丙烯酰胺硅胶键合固定相的制备与评价

以3-巯丙基三甲氧基硅烷为偶联剂,将聚N-异丙基丙烯酰胺(PNIPAM)键合到硅胶上,制得了键合固定相（SI-PNIPAM）填料,并用元素分析、红外光谱等对其进行了表征。以甲醇-水为二元流动相,用多环芳烃、碱性物质对该固定相进行了色谱评价,并考察了该固定相的适用pH范围及水解稳定性。结果表明:该固定相具有较好的色谱性能与温敏特性,并且在pH 2.5～7.5时稳定性良好。     

New solid phase extractors for selective separation and preconcentration of mercury (II) based on silica gel immobilized aliphatic amines 2-thiophenecarboxaldehyde Schiff’s bases

2-Thiophenecarboxaldhyde is chemically bonded to silica gel surface immobilized monoamine, ethylenediamine and diethylenetriamine by a simple Schiff’s base reaction to produce three new SP-extractors, phases (I-III). The selectivity properties of these phases toward Hg(II) uptake as well as eight other metal ions: Ca(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were extensively studied and evaluated as a function of pH of metal ion solution and equilibrium shaking time by the batch equilibrium technique. The data obtained clearly indicate that the new SP-extractors have the highest affinity for retention of Hg(II) ion. Their Hg(II) uptake in mmol g⁻¹ and distribution coefficient as log K_d values are always higher than the uptake of any other metal ion along the range of pH used (pH 1.0-10.0). The uptake of Hg(II) using phase I was 2.0 mmol g⁻¹ (log K_d 6.6) at pH 1.0 and 2.0. 1.8 mmol g⁻¹ (log K_d 4.25), 1.6 mmol g⁻¹ (log K_d 3.90) and 1.08 mmol g⁻¹ (log K_d 3.37) at pH 3.0, 5.0 and 8.0, respectively. Selective separation of Hg(II) from the other eight coexisting metal ions under investigation was achieved successfully using phase I at pH 2.0 either under static or dynamic conditions. Hg(II) was completely retained while Ca(II), Co(II) and Cd(II) ions were not retained. Ni(II), Cu(II), Zn(II), Pb(II) and Fe(III) showed very low percentage retention values to be 0.74, 0.97, 3.5 and 6.3%, respectively. Moreover, the high recovery values (95.5 ± 0.5, 95.8 ± 0.5 and 99.0% ± 1.0) of percolating two liters of doubly distilled water, drinking tap water and Nile river water spiked with 5 ng/l of Hg(II) over 100 mg of phase I packed in a minicolumn and used as a thin layer enrichment bed demonstrate the accuracy and validity of the new SP-extractors for preconcentration of the ultratrace amount of spiked Hg(II) prior to the determination by borohydride generation atomic absorption spectrometry (AAS) with no matrix interference. The detection limit (3σ) for Hg(II) based on enrichment factor 1000 was 4.75 pg/ml. The precision (R.S.D.) obtained for different amounts of mercury was in the range 0.52-1.01% (N = 3) at the 25-100 ng/l level.     

Synthesis and application of phosphorus dendrimer immobilized azabis(oxazolines)

Phosphorus dendrimer immobilized azabis(oxazoline) ligands can be efficiently synthesized up to the third generation with 48 ligand molecules being attached to the periphery using click chemistry. The so-assembled macromolecules were evaluated in copper(II)-catalyzed asymmetric benzoylations, showing good yields and enantioselectivities. Moreover, the copper(II)-catalysts could be readily recovered and reused in several cycles. The globular structure of the dendritic ligands seems to prevent interference of the triazole moieties in the catalysis, contrasting MeOPEG or polystyrene bound ligands of the same type.     

7-amino-4-azaheptyl grafted onto a silica gel as a sorbent for the on-line preconcentration and determination of iron(III) in water samples.

A new sorbent was synthesized by anchoring 7-amino-4-azaheptyltrimetoxisilane, freshly prepared, to silica gel, producing 7-amino-4-azaheptyl anchored silica gel (AAHSG). This material was characterized by infrared spectroscopy (IR), elemental analysis (CHN), and nitrogen adsorption-desorption isotherms. Isotherms of the adsorption of Fe3+, Fe2+ and Cu2+ on AAHSG were recorded, which indicated that Fe3+ presents a higher affinity by the sorbent. Therefore, AAHSG was successfully employed as a sorbent in a simple flow system for the preconcentration of Fe3+ in natural water samples, such as, river water, lagoonwater, springwater, stream water, well water and two water reference materials (NIST-SRM 1640, NIST-SRM 1643d). The obtained preconcentration factor was 82.2, and the detection limit achieved was 5.9 ng ml(-1). The recovery of spiked water samples ranged from 95.0 - 103.1%.