香豆素343敏化TiO2纳米粒子光致电子转移的荧光和拉曼光谱

通过对香豆素343(C343)染料敏化TiO₂纳米粒子光致电子转移的荧光和拉曼光谱特性的研究表明,C343染料敏化TiO₂纳米粒子稳态吸收光谱和稳态荧光光谱的红移归因于从被吸附的C343染料分子激发态和C343/TiO₂复合物到TiO₂纳米粒子导带的光致电子转移. 由时间分辨荧光光谱确定了C343染料敏化TiO₂纳米粒子的逆向电子转移速率常数为τ₁=31 ps. C343 染料敏化TiO₂纳米粒子体系拉曼光谱的研究表明, 被吸附在界面处的染料分子主链碳键的伸缩振动和碳环的呼吸运动的振动模式对超快界面光致电子转移有着重要的促进作用.     

Photoinduced charge carrier dynamics of Zn-porphyrin-TiO2 electrodes: the key role of charge recombination for solar cell performance

Time resolved absorption spectroscopy has been used to study photoinduced electron injection and charge recombination in Zn-porphyrin sensitized nanostructured TiO(2) electrodes. The electron transfer dynamics is correlated to the performance of dye sensitized solar cells based on the same electrodes. We find that the dye/semiconductor binding can be described with a heterogeneous geometry where the Zn-porphyrin molecules are attached to the TiO(2) surface with a distribution of tilt angles. The binding angle determines the porphyrin-semiconductor electron transfer distance and charge transfer occurs through space, rather than through the bridge connecting the porphyrin to the surface. For short sensitization times (1 h), there is a direct correlation between solar cell efficiency and amplitude of the kinetic component due to long-lived conduction band electrons, once variations in light harvesting (surface coverage) have been taken into account. Long sensitization time (12 h) results in decreased solar cell efficiency because of decreased efficiency of electron injection.     

A photo-induced electron transfer study of an organic dye anchored on the surfaces of TiO2 nanotubes and nanoparticles

We report on femtosecond-nanosecond (fs-ns) studies of the triphenylamine organic dye (TPC1) interacting with titania nanoparticles of different sizes, nanotubes and nanorods. We used time-resolved emission and absorption spectroscopy to measure the photoinduced dynamics of forward and back electron transfer processes taking place in TPC1-titania complexes in acetonitrile (ACN) and dichloromethane (DCM) solutions. We observed that the electron injection from the dye to titania occurs in a multi-exponential way with the main contribution of 100 fs from the hot excited charge-transfer state of anchored TPC1. This process competes with the relaxation of the excited state, mainly governed by solvation, that takes place with average time constants of 400 fs in ACN and 1.3 ps in DCM solutions. A minor contribution to the electron injection process takes place with longer time constants of about 1-10 ps from the relaxed excited state of TPC1. The latter times and their contribution do not depend on the size of the nanoparticles, but are substantially smaller in the case of nanotubes (1-3 ps), probably due to the caging effect. The contribution is also smaller in DCM than in ACN. The efficient back recombination takes place also in a multi-exponential way with times of 1 ps, 15 ps and 1 ns, and only 20-30% of the initial injected electrons in the conduction band are left within the first 1 ns after excitation. The faster recombination rates are suggested due to those originating from the free electrons in the conduction band of titania or the electrons in the shallow trap states, while the slower recombination is due to the electrons in the deep trap states. The results reported here should be relevant to a better understanding of the photobehaviour of an organic dye with promising potential for use in solar cells. They should also help to determine the important factors that limit the efficiency of solar cells based on the triphenylamine-based dyes for solar energy conversion.     

Femtosecond to millisecond studies of electron transfer processes in a donor-(π-spacer)-acceptor series of organic dyes for solar cells interacting with titania nanoparticles and ordered nanotube array films

Time-resolved emission and absorption spectroscopy are used to study the photoinduced dynamics of forward and back electron transfer processes taking place between a recently synthesized series of donor-(π-spacer)-acceptor organic dyes and semiconductor films. Results are obtained for vertically oriented titania nanotube arrays (inner diameters 36 nm and 70 nm), standard titania nanoparticles (25 nm diameter) and, as a reference, alumina nanoparticle (13 nm diameter) films. The studied dyes contain a triphenylamine group as an electron donor, cyanoacrylic acid part as an electron acceptor, and differ by the substituents in a spacer group that causes a shift of its absorption spectra. Despite a red-shift of the dye absorption band resulting in an improved response to the solar spectrum, smaller electron injection rates and smaller extinction coefficients result in reduced dye sensitized solar cell (DSSC) conversion efficiencies. For the most efficient dye, TPC1, electron injection from the hot locally excited state to titania on a time scale of about 100 fs is suggested, while from the relaxed charge transfer state it proceeds in a non-exponential way with time constants from 1 ps to 50 ps. Our results imply that the latter process involves the trap states below the conduction band edge (or the sub-bandgap tail of the acceptor states), localized close to the dye radical cation, and is accompanied by fast electron recombination to the parent dye's ground state. This process should limit the efficiency of DSSCs made using these types of organic dyes. The residual, slower recombination can be described by a stretched exponential decay with a characteristic time of 0.5 μs and a dispersion parameter of 0.33. Both the electron injection and back electron transfer dynamics are similar in titania nanoparticles and nanotubes. Variations between the two film types are only found in the time resolved emission transients, which are explained in terms of the difference in local electric fields affecting the position of the emission bands.     

Atomistic mechanism of charge separation upon photoexcitation at the dye-semiconductor interface for photovoltaic applications

Charge separation in excited states upon visible light absorption is a central process in photovoltaic solar cell applications. Employing state-of-the-art first principles calculations based on time-dependent density functional theory (TDDFT), we simulate electron-hole dynamics in real time and illustrate the microscopic mechanism of charge separation at the interface between organic dye molecules and oxide semiconductor surfaces in dye-sensitized solar cells. We found that electron-hole separation proceeds non-adiabatically on an ultrafast timescale <100 fs at an anthocyanin/TiO(2) interface, and it is strongly mediated by the vibrations of interface Ti-O bonds, which anchor the dye onto the TiO(2) surface. The obtained absorption spectrum and electron injection timescale agree with experimental measurements.     

Calculated structural and electronic interactions of the ruthenium dye N3 with a titanium dioxide nanocrystal

Structural and electronic properties of a small anatase TiO2 nanocrystal sensitized by the ruthenium dye N3 (Ru(4,4'-dicarboxy-2,2'-bipyridine)2(NCS)2) have been investigated using density functional theory (DFT) with support from Hartree-Fock (HF) and time dependent DFT (TD-DFT) calculations. Significant structural adjustments of both the dye and the nanocrystal are predicted to be induced by the strain imposed by the simultaneous formation of multiple dye-surface bonds. Electronic properties of the combined dye-nanocrystal system have also been calculated, including information about interfacial orbital mixing and the lowest excited singlet states. Ultrafast photoinduced electron transfer processes across the dye-nanoparticle interface in dye-sensitized solar cells are finally discussed in view of estimated electronic coupling strengths. The calculations predict injection times on the order of 10 fs for MLCT excitations to the ligand pi* levels that interact most strongly with the TiO2 conduction band, and an order of magnitude increase in the injection times for excitations to dye levels with poor spatial or energetic overlaps with the substrate conduction band.     

Modified phthalocyanines for efficient near-IR sensitization of nanostructured TiO(2) electrode

A zinc phthalocyanine with tyrosine substituents (ZnPcTyr), modified for efficient far-red/near-IR performance in dye-sensitized nanostructured TiO(2) solar cells, and its reference, glycine-substituted zinc phthalocyanine (ZnPcGly), were synthesized and characterized. The compounds were studied spectroscopically, electrochemically, and photoelectrochemically. Incorporating tyrosine groups into phthalocyanine makes the dye ethanol-soluble and reduces surface aggregation as a result of steric effects. The performance of a solar cell based on ZnPcTyr is much better than that based on ZnPcGly. Addition of 3alpha,7alpha-dihydroxy-5beta-cholic acid (cheno) and 4-tert-butylpyridine (TBP) to the dye solution when preparing a dye-sensitized TiO(2) electrode diminishes significantly the surface aggregation and, therefore, improves the performance of solar cells based on these phthalocyanines. The highest monochromatic incident photo-to-current conversion efficiency (IPCE) of approximately 24% at 690 nm and an overall conversion efficiency (eta) of 0.54% were achieved for a cell based on a ZnPcTyr-sensitized TiO(2) electrode. Addition of TBP in the electrolyte decreases the IPCE and eta considerably, although it increases the open-circuit photovoltage. Time-resolved transient absorption measurements of interfacial electron-transfer kinetics in a ZnPcTyr-sensitized nanostructured TiO(2) thin film show that electron injection from the excited state of the dye into the conduction band of TiO(2) is completed in approximately 500 fs and that more than half of the injected electrons recombines with the oxidized dye molecules in approximately 300 ps. In addition to surface aggregation, the very fast electron recombination is most likely responsible for the low performance of the solar cell based on ZnPcTyr.     

Photoacoustic measurement of electron injection efficiencies and energies from excited sensitizer dyes into nanocrystalline TiO2 films

Time-resolved photoacoustic calorimetry is used to measure the energy released upon injection of an electron from an electronically excited dye adsorbed to nanocrystalline TiO2 into the conduction band of this material. More energy is released when the environment of the dye is made less polar, because the energy of the dye-oxidized state has a more pronounced solvent dependence than the edge of the conduction band of the TiO2 semiconductor. Such energy dependences should be considered in the design of more efficient dye-sensitized solar cells.     

有机染料敏化剂JK16和JK17的几何结构、电子结构及相关性质

运用密度泛函理论中的杂化泛函B3LYP研究了高效太阳能电池新型染料敏化剂JK16和JK17的几何结构、电子结构、极化率和超极化率, 并用含时密度泛函理论(TDDFT)研究了电子吸收谱. 基于含时密度泛函理论计算结果和实验结果的定性符合, 指认了在可见和近紫外区的吸收属于π→π*跃迁. 计算结果还表明JK16和JK17激发能最低的三个跃迁都与光诱导电荷转移过程有关, 而且二-二甲基芴氨基苯并噻吩基团对光电转换过程的敏化起主要作用, 发生于染料敏化剂JK16、JK17和TiO2界面之间的电荷转移是由染料分子激发态向半导体导带的电子注入过程. 此外, 通过对JK16和JK17的比较, 分析了亚乙烯基对几何结构、电子结构和谱学特性的影响.     

Alkyl chain barriers for kinetic optimization in dye-sensitized solar cells

The optimization of interfacial charge transfer is crucial to the design of dye-sensitized solar cells. In this paper we address the dynamics of the charge separation and recombination in liquid-electrolyte and solid-state cells employing a series of amphiphilic ruthenium dyes with varying hydrocarbon chain lengths, acting as an insulating barrier for electron-hole recombination. Dynamics of electron injection, monitored by time-resolved emission spectroscopy, and of charge recombination and regeneration, monitored by transient optical absorption spectroscopy, are correlated with device performance. We find that increasing dye alkyl chain length results in slower charge recombination dynamics to both the dye cation and the redox electrolyte or solid-state hole conductor (spiro-OMeTAD). These slower recombination dynamics are however paralleled by reduced rates for both electron injection into the TiO2 electrode and dye regeneration by the I-/I3- redox couple or spiro-OMeTAD. Kinetic competition between electron recombination with dye cations and dye ground state regeneration by the iodide electrolyte is found to be a key factor for liquid electrolyte cells, with optimum device performance being obtained when the dye regeneration is just fast enough to compete with electron-hole recombination. These results are discussed in terms of the minimization of kinetic redundancy in solid-state and liquid-electrolyte dye-sensitized photovoltaic devices.     

Challenges in the simulation of dye-sensitized ZnO solar cells: quantum confinement, alignment of energy levels and excited state nature at the dye/semiconductor interface

We report a first principles density functional theory/time-dependent density functional theory (DFT/TDDFT) computational investigation on a prototypical perylene dye anchored to realistic ZnO nanostructures, approaching the size of the ZnO nanowires used in dye-sensitized solar cells devices. DFT calculations were performed on (ZnO)(n) clusters of increasing size, with n up to 222, of 1.3 × 1.5 × 3.4 nm dimensions, and for the related dye-sensitized models. We show that quantum confinement in the ZnO nanostructures substantially affects the dye/semiconductor alignment of energy levels, with smaller ZnO models providing unfavourable electron injection. An increasing broadening of the dye LUMO is found moving to larger substrates, substantially contributing to the interfacial electronic coupling. TDDFT excited state calculations for the investigated dye@(ZnO)(222) system are fully consistent with experimental data, quantitatively reproducing the red-shift and broadening of the visible absorption spectrum observed for the ZnO-anchored dye compared to the dye in solution. TDDFT calculations on the fully interacting system also introduce a contribution to the dye/semiconductor admixture, due to configurational excited state mixing. Our results highlight the importance of quantum confinement in dye-sensitized ZnO interfaces, and provide the fundamental insight lying at the heart of the associated DSC devices.     

Contribution from a hole-conducting dye to the photocurrent in solid-state dye-sensitized solar cells

The hole transporting medium in solid-state dye-sensitized solar cells can be utilized to harvest sunlight. Herein we demonstrate that a triphenylamine-based dye, used as hole-transporting medium, contributes to the photocurrent in a squaraine-sensitized solid-state dye-sensitized solar cell. Steady-state photoluminescence measurements have been used to distinguish between electron transfer and energy transfer processes leading to energy conversion upon light absorption in the hole-transporting dye.     

Dye-sensitized solar cells based on Fe N-heterocyclic carbene photosensitizers with improved rod-like push-pull functionality

A new generation of octahedral iron(ii)–N-heterocyclic carbene (NHC) complexes, employing different tridentate C^N^C ligands, has been designed and synthesized as earth-abundant photosensitizers for dye sensitized solar cells (DSSCs) and related solar energy conversion applications. This work introduces a linearly aligned push–pull design principle that reaches from the ligand having nitrogen-based electron donors, over the Fe(ii) centre, to the ligand having an electron withdrawing carboxylic acid anchor group. A combination of spectroscopy, electrochemistry, and quantum chemical calculations demonstrate the improved molecular excited state properties in terms of a broader absorption spectrum compared to the reference complex, as well as directional charge-transfer displacement of the lowest excited state towards the semiconductor substrate in accordance with the push–pull design. Prototype DSSCs based on one of the new Fe NHC photosensitizers demonstrate a power conversion efficiency exceeding 1% already for a basic DSSC set-up using only the I⁻/I₃⁻ redox mediator and standard operating conditions, outcompeting the corresponding DSSC based on the homoleptic reference complex. Transient photovoltage measurements confirmed that adding the co-sensitizer chenodeoxycholic acid helped in improving the efficiency by increasing the electron lifetime in TiO₂. Time-resolved spectroscopy revealed spectral signatures for successful ultrafast (<100 fs) interfacial electron injection from the heteroleptic dyes to TiO₂. However, an ultrafast recombination process results in undesirable fast charge recombination from TiO₂ back to the oxidized dye, leaving only 5–10% of the initially excited dyes available to contribute to a current in the DSSC. On slower timescales, time-resolved spectroscopy also found that the recombination dynamics (longer than 40 μs) were significantly slower than the regeneration of the oxidized dye by the redox mediator (6–8 μs). Therefore it is the ultrafast recombination down to fs-timescales, between the oxidized dye and the injected electron, that remains as one of the main bottlenecks to be targeted for achieving further improved solar energy conversion efficiencies in future work.

Iron-based photosensitizers for dye-sensitized solar cells with a rod-like push–pull design. Solar cell performance was limited by ultrafast (sub-ps) recombination, but yielded better performance than the homoleptic parent photosensitizer.     

Molecular modeling of 3,4-pyridinedicarbonitrile dye sensitizer for solar cells using quantum chemical calculations

The geometries, electronic structures, polarizabilities, and hyperpolarizabilities of organic dye sensitizer 3,4-pyridinedicarbonitrile was studied based on Hartree–Fock (HF) and density functional theory (DFT) using the hybrid functional B3LYP. Ultraviolet–visible (UV–Vis) spectrum was investigated by time dependent DFT (TD-DFT). Features of the electronic absorption spectrum in the visible and near-UV regions were assigned based on TD-DFT calculations. The absorption bands are assigned to π → π1 transitions. Calculated results suggest that the three lowest energy excited states are due to photoinduced electron transfer processes. The interfacial electron transfer between semiconductor TiO₂ electrode and 3,4-pyridinedicarbonitrile is due to electron injection process from excited dye to the semiconductor’s conduction band. The role of cyanine in 3,4-pyridinedicarbonitrile in geometries, electronic structures, and spectral properties were analyzed.     

p-型和pn-型染料敏化太阳能电池

针对 (1) p-型染料敏化太阳能电池(DSCs)存在的科学问题, 即光阴极染料的吸附量偏低和电池内部的暗反应比较严重和(2) pn-型DSCs存在的光阳极和光阴极不匹配等问题, 从电极、染料和电解质三个方面系统综述了p-型和pn-型DSCs的研究进展并分析了问题可行的解决方案, 最后对p-型和pn-型DSCs的发展前景进行了展望.     

二氢吲哚类染料用于染料敏化太阳能电池光敏剂的比较

采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)对四种二氢吲哚染料进行研究, 从中筛选出相对优秀的染料敏化太阳能电池光敏剂. 对前线分子轨道的计算表明, 二氢吲哚染料的前线分子轨道结构非常有利于染料激发态向TiO2电极的电子注入. 对真空中的紫外和可见光吸收光谱的计算表明, 二氢吲哚染料的吸收光谱与太阳辐射光谱匹配较好. 对染料分子的能级计算表明, 二氢吲哚染料的能级结构比较适合于I-/I-3作电解液的TiO2纳米晶太阳能电池的光敏剂. 二氢吲哚染料最低未占据分子轨道(LUMO) 能级均比TiO2晶体导带边能级高, 能够保证激发态染料分子高效地向TiO2电极转移电子. 二氢吲哚染料最高占据分子轨道(HOMO)的能级比I-/I-3能级低, 保证了失去电子的染料分子能够顺利地从电解液中得到电子. 与实验数据比较, 得出在提高染料敏化太阳能电池转换效率方面, 对染料的关键要求是LUMO能级的位置. 染料分子的稳定性是染料敏化太阳能电池使用寿命的关键因素. 通过对化学键键长的比较表明, 二氢吲哚染料的分子稳定性基本相同. 对计算结果的分析表明, 二氢吲哚染料1(ID1)的LUMO能级最高, 分子稳定性最好, 在酒精溶液中的吸收光谱与太阳辐射光谱匹配很好, 在同类染料中是较好的染料敏化太阳能电池光敏剂.     

Energy and hole transfer between dyes attached to titania in cosensitized dye-sensitized solar cells

Cosensitization of broadly absorbing ruthenium metal complex dyes with highly absorptive near-infrared (NIR) organic dyes is a clear pathway to increase near-infrared light harvesting in liquid-based dye-sensitized solar cells (DSCs). In cosensitized DSCs, dyes are intimately mixed, and intermolecular charge and energy transfer processes play an important role in device performance. Here, we demonstrate that an organic NIR dye incapable of hole regeneration is able to produce photocurrent via intermolecular energy transfer with an average excitation transfer efficiency of over 25% when cosensitized with a metal complex sensitizing dye (SD). We also show that intermolecular hole transfer from the SD to NIR dye is a competitive process with dye regeneration, reducing the internal quantum efficiency and the electron lifetime of the DSC. This work demonstrates the general feasibility of using energy transfer to boost light harvesting from 700 to 800 nm and also highlights a key challenge for developing highly efficient cosensitized dye-sensitized solar cells.     

Recent progress in interface modification for dye-sensitized solar cells

Interface modification on the TiO₂/dye/electrolyte interface of dye-sensitized solar cells (DSCs) is one of the most effective approaches to suppress the charge recombination, improve electron injection and transportation, and thus ameliorate the conversion efficiency and stability of DSCs. Conventional research focusing on the photoanodes interface modification before sensitization in dye-sensitized solar cells has been carried out and reviewed. However, recent studies showed that post-modification after sensitization of the TiO₂ electrode also plays a significant role on the TiO₂/dye/electrolyte interface. This post-modification using the immersing method could deprotonate dye molecules, prohibit the dye aggregation and retard the recombination reaction. As a result, it has great influence on the devices’ photovoltaic performance. This interface modification could also provide an approach to broaden the response of the solar spectrum by introducing an alternative assembling structure. An in-situ meaning of using a co-adsorbent is employed to modify the interface in the DSCs, which could retard the aggregation of the dye molecules and enhance the conversion efficiency. In addition, electrolyte additives can be used to modify the TiO₂/dye/electrolyte interface through some unique mechanisms. Based on the background of interface modification of photoanodes before sensitization, this review introduces various interface modifications after sensitization of dye-sensitized solar cells and their mechanisms.     

A continuity equation for the simulation of the current-voltage curve and the time-dependent properties of dye-sensitized solar cells

A numerical model that simulates the steady-state current-voltage curve and the time-dependent response of a dye-sensitized solar cell with a single continuity equation is derived. It is shown that the inclusion of the multiple-trapping model, the quasi-static approximation and non-linear recombination kinetics leads to a continuity equation for the total electron density in the photoanode with an electron density-dependent diffusion coefficient and a density-dependent pseudo-first order recombination constant. All parameters in the model can be related to quantities accessible experimentally. The required power exponents are taken from impedance spectroscopy measurements at different voltages. The model provides new insights into the physical interpretation of the power exponents. Modeling examples involving a high-efficiency TiO(2)-based dye solar cell and a ZnO-based dye solar cell are presented. It is demonstrated that the model reproduces the transient behavior of the cell under small perturbations. The spatial dependence of the recombination rate and the influence of film thickness and of voltage dependent injection efficiency on cell performance are studied. The implications of the model are discussed in terms of efficiencies potentially attainable in dye-sensitized solar cells and other kinds of solar cells with a diffusional mechanism of charge transport.