Quantitative Analysis of Planktonic Foraminifera in Surface Sediments From the South China Sea

Q-mode factor analysis was applied to 99 surface samples from the South China Sea to define four planktonic foraminiferal assemblages: tropical-subtropical assemblage, high-salinity assemblage, transitional assemblage and dissolution resistant assemblage. The tropical-subtropical assemblage is a dominant assemblage. The variation of the planktonic foraminifera of this assemblage reflects the changes of tropical surface water from the west Pacific to South China Sea. These four assemblages reveal that different planktonic foraminiferal assemblages are controlled by different factors in the South China Sea, such as tropical-subtropical assemblage controlled by sea surface temperature (SST), high-sallnity assemblage mainly by salinity besides SST, transitional assemblage by SST and dissolution resistant assemblage by water depth.     

Prediction of the Properties of a Binary Surfactant Mixture of Arlacel‐165 and Myrj‐59 in Aqueous System

Foamability and foam stability, emulsifying power, surface tension, and interfacial tension were investigated for different ratios of binary surfactant system of Arlacel‐165 (glyceryl stearate (and) PEG‐100 stearate) and Myrj‐59 (polyoxyethylene 100 stearate). Among all the ratios tested for their foaming power and foamabilty, the ratios 8:2, 5:5, 4:6, 2:8, and 1:9 of Arlacel‐165 and Myrj‐59 showed the best results. At these ratios, the foaming power and foamability was found to be 100%. The surfactants having foam stability more than 50% can be considered as metastable and those less than 50% are considered as low‐stability foams. In case of surface tension and interfacial tension property measurements, 8:2 and 9:1 showed the best results. At 8:2 and 9:1 of Arlacel‐165 and Myrj‐59, the surface tension was found to be 37.7 dynes/cm and 1.33 dynes/cm respectively at 30°C ambient temperature. Also, 7:3 of this binary mixture was found to exhibit the best emulsifying power among all the ratios tested. At 30°C, the emulsifying property of the binary mixture was 6 hours.     

Cannabidiol Discovery and Synthesis—a Target-Oriented Analysis in Drug Production Processes

The current state of evidence and recommendations for cannabidiol (CBD) and its health effects change the legal landscape and aim to destigmatize its phytotherapeutic research. Recently, some countries have included CBD as an antiepileptic product for compassionate use in children with refractory epilepsy. The growing demand for CBD has led to the need for high-purity cannabinoids on the emerging market. The discovery and development of approaches toward CBD synthesis have arisen from the successful extraction of Cannabis plants for cannabinoid fermentation in brewer's yeast. To understand different contributions to the design and enhancement of the synthesis of CBD and its key intermediates, a detailed analysis of the history behind cannabinoid compounds and their optimization is provided herein.     

Properties of Surface and Micelle in a pH‐Mediated Ternary Surfactant Mixture in Salt Solution

We have investigated the mixing behavoir of a pH‐mediated ternary surfactant mixture at constant ratio of dodecyldimethylamine oxide (DDAO) and Triton X‐100 (9:1). From the equilibrium surface tension measurements at different pHs, the critical micelle concentration (cmc) data were obtained as functions of the pH. Values of the cmc and composition of the micelles were predicted using the regular solution approximation. To some extent, the experimental cmc values agree with the predicted cmc. The average degree of ionization of dodecyldimethylamine oxide in the mixed surfactant systems was estimated using potentiometric titrations. The surface electric potential of the micelles (Ψ_o) was determined using two methods, one by hydrogen ion titration and the other by the dissociation constants of an acid‐base indicator. In a high degree of ionization of DDAO in the micelles phase (a_m), Ψ_o estimated from acid‐base indicator is much higher than that from hydrogen ion titration. In the protonated dodecyldimethylamine oxide/TX‐100 binary surfactant system, Ψ_o estimated from hydrogen ion titration was as high as 89 mV. The micellar aggregation numbers evaluated by the steady‐state fluorescence probe method increase with pH except at pH=5.03. At pH=5.03, the maximum micelle aggregation number was observed.     

Comparative Spectrophotometric,Spectrofluorometric, and High‐performance Liquid Chromatographic Study for the Quantitative Determination of the Binary Mixture Felodipine and Ramipril in Pharmaceutical Formulations

Abstract

Two‐component mixtures of felodipine (FLD) and ramipril (RMP) were assayed by derivative UV spectrophotometry, spectrofluorometry, and high performance liquid chromatography (HPLC). The spectrophotometric methods included a zero‐crossing first‐ and second‐order derivative procedure and a derivative compensation technique for the determination of binary mixtures with overlapping spectra. The spectrofluorometric method was based on first‐ and second‐order derivatives of the emission spectra (zero‐crossing point). Results from these methods were compared with those obtained by an exclusively developed isocratic reversed phase HPLC method. A reversed‐phase Adsorbosil DS analytical column, with methanol‐acetonitrile‐water (50∶30∶20, v/v) mobile phase at a flow rate of 1.5 ml/min, was used with a UV detector. The temperature was set at 25±0.2°C. Results obtained by the spectrophotometric and spectrofluorometric methods were comparable to those obtained by the HPLC method, as far as analysis of variance (ANOVA) test results were concerned. It is concluded that the developed methods are equally accurate, sensitive, and precise; with direct and simple application to pharmaceutical formulations of felodipine and ramipril combination, without interference from common pharmaceutical adjuvants.     

Studies on Synthesis of a Cycloheptapeptide and Effects of Different Metal Ions on the Cyclization

ＩｎｔｒｏｄｕｃｔｉｏｎＣｙｃｌｉｃｐｅｐｔｉｄｅｓ ,ｗｈｉｃｈａｒｅｃｏｎｓｔｒａｉｎｅｄｃｏｎｆｏｒｍａ ｔｉｏｎａｌｌｙａｎｄｍｏｒｅｒｅｓｉｓｔａｎｔｔｏｐｒｏｔｅａｓｅｄｉｇｅｓｔｉｏｎｓｔｈａｎｔｈｅｉｒｌｉｎｅａｒｐｒｅｃｕｒｓｏｒｓ ,ｈａｖｅｂｅｅｎｏｆｇｒｅａｔｉｎｔｅｒｅｓｔａｓｓｙｎｔｈｅｔｉｃｔａｒｇｅｔｓｂｏｔｈａｓｐｏｔｅｎｔｉａｌｄｒｕｇｌｅａｄｓａｎｄａｓｍｏｄｅｌｓｆｏｒｃｏｎ ｆｏｒｍａｔｉｏｎａｌａｎａｌｙｓｉｓ .1 4 Ｃｕｒｒｅｎｔｍｅｔｈｏｄｓｆｏｒｓｙｎｔ…     

Detection of Synthetic Antioxidants: What Factors Affect the Efficiency in the Chromatographic Analysis and in the Electrochemical Analysis?

Antioxidants are food additives largely employed to inhibit oxidative reactions in foodstuffs rich in oils and fat lipids, extending the shelf life of foodstuffs and inhibiting alterations in color, flavor, smell, and loss of nutritional value. However, various research has demonstrated that the inadequate use of synthetic antioxidants results in environmental and health problems due to the fact that some of these compounds present toxicity, and their presence in the human body, in high concentrations, is related to the development of some cancer types and other diseases. Therefore, the development of analytical methods for identifying and quantifying synthetic antioxidants in foodstuffs is fundamental to quality control and in ensuring consumer food safety. This review describes the recent chromatographic and electrochemical techniques used in the detection of synthetic phenolic antioxidants in foodstuffs, highlighting the main characteristics, advantages and disadvantages of these methods, and specific typical features, which include extraction methods for sample preparation and materials used in the working electrode construction, considering chromatographic and voltammetric methods, since these specific features influence the efficiency in the analysis.     

Detection and Determination of Released Ions in the Presence of Nanoparticles: Selectivity or Strategy?

Metallic nanoparticles can release ionic species, but also both species can occur in the same samples. Therefore, there is a need of efficient and cost‐effective methods to determine these ionic species in the presence of the corresponding nanoparticles. Electroanalytical techniques open the door to this selective detection of NPs and their ions. In this work, a methodology that allows the direct determination of ionic silver (Ag⁺) in the presence of silver nanoparticles based on anodic stripping voltammetry was implemented. Silver nanoparticles were determined, after acidic digestion of the sample, by difference with respect to the total content of silver. The method was validated in terms of specific identification of silver ions, linearity, working range, limit of detection, limit of quantification, recovery, repeatability and ruggedness. All parameters are adequate for an analytical method following Eurachem recommendations. The validated method was used to determine the concentration of Ag⁺ and total silver in two commercial products of colloidal silver. The results were compared with those obtained by atomic absorption spectrometry in combination with an ultrafiltration step for isolation of ionic silver. There were no significant differences in the results. The proposed methodology benefits from the intrinsic selectivity of the electroanalysis methods, allowing to eliminate the steps of pretreatments of the samples, which are necessary in other techniques. The novelty of the article lies in the direct determination of Ag (I) ions in the presence of AgNPs, without the use of previous separation steps.     

Synthesis and Characterization of Ti-ZSM-5 in a Non-alkaline Medium in the Presence of Fluoride Ions

Ti-ZSM-5 was synthesized by hydro thermal crystallization in the presence of fluoride via using a non-alkaline medium. pH values were 5~7. SEM showed perfect Ti-ZSM-5 crystals and a large single crystal growing from the favourable medium. Substitution of titanium for silicon in the ZSM-5 framework led to a decrease of crystal size and of the length/width ratio. Electron microprobe analysis indicated a homogeneous distribution of titanium in the ZSM-5 framework. The unit cell parameters of the Ti-ZSM-5 determined by XRD increased with an increase in titanium content in the framework. TiO4tetrahedron vibrations were found in the IR spectrum. Si(1Ti) peakwas seen in the 29Si MAS NMR spectrum at -1O1ppm(from TMS) and 13CMAS NMR analysis verified the effect of (C3H7)4N F- occluded in thechannels. XPS study on the precursors, calcined and H2O2 adsorbed Ti-ZSM-5 was performed and some interesting results were observed.     

Validated Stability-Indicating HPLC–DAD Determination of the Antihypertensive Binary Mixture of Carvedilol and Hydrochlorothiazide in Tablet Dosage Forms

A simple and selective HPLC with diode array detection stability-indicating method was developed for the simultaneous determination of the antihypertensive drugs carvedilol (CRV) and hydrochlorothiazide (HCT) in their combined formulations. Effective chromatographic separation was achieved using Zorbax SB-C8 column (4.6 × 250 mm, 5 μm) with gradient elution of the mobile phase composed of 0.025 M phosphoric acid and acetonitrile at a flow rate of 1 mL min^?1. The multiple wavelength detector was set at 242 nm for measurement of CRV and 271 nm for HCT. Quantification was based on measuring the peak areas. The cited drugs were resolved with retention times 4.9 and 6.7 min for HCT and CRV, respectively. Analytical performance of the proposed HPLC procedure was thoroughly validated with respect to system suitability, linearity, ranges, precision, accuracy, specificity, robustness, detection and quantification limits. The linearity ranges were 5–300 and 5–200 μg mL^?1 for CRV and HCT, respectively, with correlation coefficients >0.9996. Both drugs were subjected to stress conditions of acidic and alkaline hydrolysis, oxidation, photolysis and thermal degradation. The proposed method proved to be stability-indicating by resolution of the drugs from their forced degradation products. Moreover, specificity of the method was verified by resolution of both drugs from more than 20 pharmaceutical compounds of various medicinal categories. The validated HPLC method was applied to the analysis of the cited antihypertensive drugs in their combined tablet dosage forms. The proposed method made use of DAD as a tool for peak identity and purity confirmation.     

Validated Stability-Indicating HPLC–DAD Determination of the Antihypertensive Binary Mixture of Carvedilol and Hydrochlorothiazide in Tablet Dosage Forms

A simple and selective HPLC with diode array detection stability-indicating method was developed for the simultaneous determination of the antihypertensive drugs carvedilol (CRV) and hydrochlorothiazide (HCT) in their combined formulations. Effective chromatographic separation was achieved using Zorbax SB-C8 column (4.6 × 250 mm, 5 μm) with gradient elution of the mobile phase composed of 0.025 M phosphoric acid and acetonitrile at a flow rate of 1 mL min⁻¹. The multiple wavelength detector was set at 242 nm for measurement of CRV and 271 nm for HCT. Quantification was based on measuring the peak areas. The cited drugs were resolved with retention times 4.9 and 6.7 min for HCT and CRV, respectively. Analytical performance of the proposed HPLC procedure was thoroughly validated with respect to system suitability, linearity, ranges, precision, accuracy, specificity, robustness, detection and quantification limits. The linearity ranges were 5–300 and 5–200 μg mL⁻¹ for CRV and HCT, respectively, with correlation coefficients >0.9996. Both drugs were subjected to stress conditions of acidic and alkaline hydrolysis, oxidation, photolysis and thermal degradation. The proposed method proved to be stability-indicating by resolution of the drugs from their forced degradation products. Moreover, specificity of the method was verified by resolution of both drugs from more than 20 pharmaceutical compounds of various medicinal categories. The validated HPLC method was applied to the analysis of the cited antihypertensive drugs in their combined tablet dosage forms. The proposed method made use of DAD as a tool for peak identity and purity confirmation.

     

Isobaric Binary and Ternary Vapor–Liquid Equilibrium for the Mixture of n-Hexane,Methylcyclopentane and N-Methylpyrrolidone

Journal of Solution Chemistry - The vapor–liquid phase equilibrium (VLE) data for binary systems of: n-hexane?+?methylcyclopentane, n-hexane?+?N-methylpyrrolidone...     

Quantitative Analysis of Terbutaline (Bricanyl®) in Human Plasma with Liquid Chromatography and Electrochemical Detection Using On-Line Enrichment

Abstract

A liquid chromatographic method with electrochemical detection (LC-EC) has been developed for the quantitative analysis of terbuta-line in the range 5–50 pmole ml^?1 of human plasma. Terbutaline is isolated from 2 ml of plasma on an ion-exchange column and the eluate is concentrated on a hydrophobic precolumn on-line in the chromatographic system. The precolumn is then back-flushed for further separation onto a hydrophobic analytical column. The mobile phase is a methanol-aqueous buffer to which sodium perchlorate is added to achieve resolution from interfering peaks. A glassy carbon electrode is used for detection. Comparison has been made with gas chromatography-mass spectrometry (GC-MS) to examine the accuracy of the method.     

Qualitative and Quantitative Analysis of Microbial Transformation of Steroidal Saponins in Dioscorea zingiberensis

Diosgenin is an important starting material in the steroidal hormone industry. In this paper diosgenin was obtained by biotransformation of steroidal saponins in Dioscorea zingiberensis with the fungus Aspergillus oryzae. In the pre- and post-biotransformed samples, five main steroidal saponins and the aglycone (diosgenin) were identified by evaporative light scattering detector. An LC-UV quantification method for them was established by using C18 column and a mobile phase of aqueous acetonitrile. By means of this method, a good linearity (r > 0.9995) and recovery of the analytes (97.5–101.3%) were obtained for all the compounds. During biotransformation, the sugar chains of saponins were hydrolyzed and the content of the hydrolyzed product (diosgenin) increased 16 times after 84 h fermentation.     

SPE and LC–ESI–MS for Quantitative Analysis of Mitiglinide in Human Plasma in a Bioequivalence Study

Liquid chromatography–electrospray ionization mass spectrometry has been used for rapid, selective, and sensitive quantitative analysis of mitiglinide in human plasma. Sample pretreatment involved solid-phase extraction from plasma with gliclazide as internal standard. Separation was performed on a C₁₈ column (150 × 2.0 mm) with 71:29 (v/v) acetonitrile–water (containing 0.1% formic acid and 0.2 mmol L^?1 ammonium acetate) as mobile phase at a flow rate of 0.2 mL min^?1. The method was validated then successfully applied to a clinical bioequivalence study of mitiglinide in 20 healthy volunteers after oral administration.     

Correlation Analysis of the Runoff of the Rivers and the Seisms in China

In recent hundred years the annual discharge variations of the Changjiang River (represented by the Yichang station) and the Huanghe River (represented by Shanxian and Tangnaihe, respectively) have closely related to the geographical distribution of the earthquakes coming about in China in the same year, Both the occurrence of the destructive seism or seismic swarm in the river basins and the disappearance of the shocks in the east and south of the basins are the conditions that the Changjiang and Huanghe Rivers are the high flow while that the strong earthquake of magnitude 7 or more occurred in North China is the condition for the Changjiang low flow year and that of 6 or more in the Qilian Mountains area is for the Huanghe River. In the latter part of this paper, a 2-year sample is given to explain that the conditions of the 2 rivers being high flow years are that the north-south seismic belt is active and in the meanwhile no seism occurred in South China, and those of the low flow year are that the     

LC–Tandem-MS Validation for the Quantitative Analysis of Levonorgestrel in Human Plasma

In this study, a rapid, sensitive and reproducible liquid chromatography–tandem mass spectrometry method for the determination of levonorgestrel in human plasma, was developed and validated. With a structural analogue norethindrone as the internal standard, levonorgestrel was extracted from plasma using ethyl acetate. The organic layer was evaporated to dryness and the residue was reconstituted in mobile phase. An aliquot of 20 μL was chromatographically analyzed on a Phenomenex Luna C₁₈ column with water and acetonitrile as the mobile phase. Selected reaction monitoring was specific for mass detection employing positive electrospray ionization. The calibration standards were linear over the concentration range 0.625–40 ng mL^?1. The intra- and inter-day precision over the entire concentration range were less than 8.16%. The method was found to be suitable for application to a pharmacokinetic study after oral administration of 1.5 mg levonorgestrel tablet to 20 healthy female volunteers.     

Effects of Y(Ⅲ) Ions on the Fluorescence Properties of Ce(Ⅲ) Ion and the Organic Ligands in the Comp

ＥｆｆｅｃｔｓｏｆＹ（Ⅲ）ＩｏｎｓｏｎｔｈｅＦｌｕｏｒｅｓｃｅｎｃｅＰｒｏｐｅｒｔｉｅｓｏｆＣｅ（Ⅲ）ＩｏｎａｎｄｔｈｅＯｒｇａｎｉｃＬｉｇａｎｄｓｉｎｔｈｅＣｏｍｐｌｅｘＬＩＷｅｎ－ｌｉａｎ．（ＣｈａｎｇｃｈｕｎＩｎｓｔｉｔｕｔｅｏｆＰｈｙｓｉｃｓ...