离子凝胶薄膜栅介石墨烯场效应管

在石墨烯场效应晶体管栅介结构中引入具有良好电容特性或极化特性的材料可改善晶体管性能.本文采用化学气相沉积制备的石墨烯并以PVDF-[EMIM]TF2N离子凝胶薄膜(ion-gel film)作为介质层制备底栅型石墨烯场效应管(graphene-based field effect transistor, GFET),研究其电学特性以及真空环境和温度对GFET性能的影响.结果表明离子凝胶薄膜栅介石墨烯场效应晶体管表现出良好的电学特性,室温空气环境中,与SiO_2栅介GFET相比, ion-gel膜栅介GFET开关比(J_(on)/J_(off))和跨导(g_m)分别提高至6.95和3.68×10~(–2) mS,而狄拉克电压(V_(Dirac))低至1.3 V;真空环境下ion-gel膜栅介GFET狄拉克电压最低可降至0.4 V;随着温度的升高, GFET的跨导最高可提升至6.11×10~(–2) mS.     

Tunable valley filter efficiency by spin–orbit coupling in silicene nanoconstrictions

Valley filter is a promising device for producing valley polarized current in graphene-like two-dimensional honeycomb lattice materials. The relatively large spin–orbit coupling in silicene contributes to remarkable quantum spin Hall effect, which leads to distinctive valley-dependent transport properties compared with intrinsic graphene. In this paper,quantized conductance and valley polarization in silicene nanoconstrictions are theoretically investigated in quantum spinHall insulator phase. Nearly perfect valley filter effect is found by aligning the gate voltage in the central constriction region. However, the valley polarization plateaus are shifted with the increase of spin–orbit coupling strength, accompanied by smooth variation of polarization reversal. Our findings provide new strategies to control the valley polarization in valleytronic devices.     

Optical response of tunable terahertz plasmon in a grating-gated graphene transistor

Tunable terahertz plasmon in a graphene-based device with a grating serving as a top gate is studied. Transmission spectra exhibit a distinct peak in the terahertz region when the terahertz electric field is perpendicular to the grating fingers.Our results show that the extinction in the transmission of single-layer graphene shields beyond 80%. Electronic results further show that the graphene plasmon can be weakly adjusted by tuning the gate voltage. Theoretical calculation also implies that the plasmon frequency of graphene can fall into the terahertz region of 1–2 THz by improving the sustaining ability and capacitance of the top gate.     

Quantum-interference-controlled three-terminal molecular transistors based on a single ring-shaped molecule connected to graphene nanoribbon electrodes

We study molecular transistors where graphene nanoribbons act as three metallic electrodes connected to a ring-shaped 18-annulene molecule. Using the nonequilibrium Green function formalism combined with density functional theory, recently extended to multiterminal devices, we show that these nanostructures exhibit exponentially small transmission when the source and drain electrodes are attached in a configuration with destructive interference of electron paths around the ring. The third electrode, functioning either as an attached infinite-impedance voltage probe or as an "air-bridge" top gate covering half of molecular ring, introduces dephasing that brings the transistor into the "on" state with its transmission in the latter case approaching the maximum limit for a single conducting channel device. The current through the latter device can also be controlled in the far-from-equilibrium regime by applying a gate voltage.     

Perfect valley polarization in MoS<Subscript>2</Subscript>

We study perfect valley polarization in a molybdenum disulfide (MoS₂) nanoribbon monolayer using two bands Hamiltonian model and non-equilibrium Green’s function method. The device consists of a one-dimensional quantum wire of MoS₂ monolayer sandwiched between two zigzag MoS₂ nanoribbons such that the sites A and B of the honeycomb lattice are constructed by the molecular orbital of Mo atoms, only. Spin-valley coupling is seen in energy dispersion curve due to the inversion asymmetry and time-reversal symmetry. Although, the time reversal symmetry is broken by applying an external magnetic field, the valley polarization is very small. A valley polarization equal to 46% can be achieved using an exchange field of 0.13 eV. It is shown that a particular spin-valley combination with perfect valley polarization can be selected based on a given set of exchange field and gate voltage as input parameters. Therefore, the valley polarization can be detected by detecting the spin degree of freedom.     

基于毫米级单晶石墨烯的倍频器性能研究

石墨烯作为一种拥有高电子迁移率和高饱和速度的二维材料,在射频电子学领域具有很大的应用潜力,引起了人们广泛的研究兴趣.近些年随着化学气相沉积制备石墨烯技术的发展,高质量大尺寸的单晶石墨烯生长技术也愈加成熟.本文基于化学气相沉积生长的毫米级单晶石墨烯,在高介电常数介质上制备出高性能的石墨烯倍频器,并且对其倍频特性做了系统的研究.研究结果表明:在输入信号频率为1 GHz时,倍频增益可以达到-23.4 dB,频谱纯度可以达到94%.研究了不同漏极偏压以及输入信号功率下倍频增益的变化特性,随着漏极偏压以及输入信号功率的增加,倍频增益增加.对具有不同跨导和电子空穴电导对称性的器件的倍频增益和频谱纯度随输入信号频率f_(in)的变化关系进行了研究.结果表明,跨导对于倍频增益影响显著,在f_(in)=1 GHz时器件的频谱纯度差别不大,均大于90%,但是随着f_(in)增加至4 GHz,电子空穴电导对称性较差的器件频谱纯度下降至42%,电子空穴电导对称性较好的器件仍能保持85%的频谱纯度.这是电子空穴电导对称性和电子空穴响应速度共同作用的结果.本文的研究结果对于高性能石墨烯倍频器设计具有一定的指导意义.     

A scheme for a topological insulator field effect transistor

We propose a scheme for a topological insulator field effect transistor. The idea is based on the gate voltage control of the Dirac fermions in a ferromagnetic topological insulator channel with perpendicular magnetization connecting to two metallic topological insulator leads. Our theoretical analysis shows that the proposed device displays a switching effect with high on/off current ratio and a negative differential conductance with a good peak to valley ratio.     

Magnetothermoelectric transport in modulated and unmodulated graphene

We draw motivation from recent experimental studies and present a comprehensive study of magnetothermoelectric transport in a graphene monolayer within the linear response regime. We employ the modified Kubo formalism developed for thermal transport in a magnetic field. Thermopower as well as thermal conductivity as a function of the gate voltage of a graphene monolayer in the presence of a magnetic field perpendicular to the graphene plane is determined for low magnetic fields (～1 T) as well as high fields (～8 T). We include the effects of screened charged impurities on thermal transport. We find good qualitative and quantitative agreement with recent experimental work on the subject. In addition, in order to analyze the effects of modulation, which can be induced by various means, on the thermal transport in graphene, we evaluate the thermal transport coefficients for a graphene monolayer subjected to a periodic electric modulation in a magnetic field. The results are presented as a function of the magnetic field and the gate voltage.     

Valley selection rule in a Y-shaped zigzag graphene nanoribbon junction

The valley valve effect was predicted in a straight zigzag graphene nanoribbon （ZGR） p/n junction. In this work, we address a possible valley selection rule in a Y-shaped ZGR junction. By modeling the system as a three-terminal device and calculating the conductance spectrum, we found that the valley valve effect could be preserved in the system and the Y-shaped connection does not mix the valley index or the pseudoparities of quasiparticles. It is also shown that the Y-shaped ZGR device can be used to separate spins in real space according to the unchanged valley valve effect. Our finding might pave a way to manipulate and detect spins in a multi-terminal graphene-based spin device.     

Spin-polarized tunneling in a ferromagnetic graphene junction: Interplay between the exchange interaction and the orbital effect of the magnetic field

The influence of magnetic vector potential barrier (MVPB) on the spin-polarized transport of massless Dirac particles in ferromagnetic graphene is studied theoretically. The phenomenon of Klein tunneling of relativistic particles across a rectangular potential barrier prevents any of the massless fermions from being confined but they can be electrically confined by quantum dots with integrable dynamics (Bardarson et al., 2009) [36]. Utilization of only the in-plane exchange splitting in the ferromagnetic graphene cannot produce 100% spin polarization. This tunneling can be confined using the magnetic vector potential barrier, which leads to high degree of spin polarization. By combining the orbital effect and the Zeeman interaction in graphene junction, it is found that the junction mimics behavior of half-metallic tunneling junction, in which it acts as a metal to particles of one spin orientation but as an insulator or a semiconductor to those of the opposite orientation. The idea of the half-metallic tunneling junction can provide a source of ∼100% spin-polarized current, which is potentially very useful. Adjustment of the position of the Fermi level in ferromagnetic layer by placing a gate voltage on top of the ferromagnetic layer shows that reverse of the orientation of the completely spin-polarized current passing through the junction is controlled by adjusting the gate voltage. These interesting characteristics should lead to a practical gate voltage controlled spin filtering and spin-polarized switching devices as a perfect spin-polarized electron source for graphene-based spintronics.     

Dependence of valley polarization on Schottky metal stripe in magnetic-strain graphene

We investigate the valley-dependent transport properties of electrons in a magnetic-strain graphene under the modulation of the Schottky metal (SM) stripe. The valley polarization can be achieved in such a graphene due to the effect of the strained barrier rather than the SM stripe. However, the SM stripe can play an important effect on the degree of the valley polarization, which can be easily controlled through changing the position and/or width of the SM stripe. Furthermore, the applied voltage on the SM stripe also can easily modulate the valley polarization. This study is very useful for understanding and designing the valleytronic devices.     

Resonance absorption of terahertz radiation in nanoperforated graphene

Recent measurements of the conductivity of nanoperforated graphene are interpreted in terms of edges states existing near the edge of each nanohole. The perimetric quantization of edge states should result in the formation of a quasi-equidistant ladder of quasistationary energy levels. Dirac fermions filling this ladder rotate about each nanohole in the direction determined by the valley index. It is shown that the irradiation of this system by circularly polarized terahertz radiation leads to a resonance in absorption in one of the valleys. The magnitude of absorption at the resonance frequency can be controlled by means of gate voltage.     

High temperature characteristics of bilayer epitaxial graphene field-effect transistors on SiC Substrate

In this paper,high temperature direct current(DC) performance of bilayer epitaxial graphene device on SiC substrate is studied in a temperature range from 25℃ to 200℃.At a gate voltage of-8 V(far from Dirac point),the drainsource current decreases obviously with increasing temperature,but it has little change at a gate bias of +8 V(near Dirac point).The competing interactions between scattering and thermal activation are responsible for the different reduction tendencies.Four different kinds of scatterings are taken into account to qualitatively analyze the carrier mobility under different temperatures.The devices exhibit almost unchanged DC performances after high temperature measurements at 200℃ for 5 hours in air ambience,demonstrating the high thermal stabilities of the bilayer epitaxial graphene devices.     

Device characteristics and tight binding based modeling of bilayer graphene field-effect transistor

In this work the device characteristic of bilayer graphene MOSFET is investigated by calculation of transmission coefficient using tight-binding method. The real shape of applied potential on the bilayer graphene was included in the tight binding calculation. As obtained transmission coefficient is used to explore the current–voltage characteristics of the device in both on and off regimes. Electrical behavior of the device was obtained for different gate and drains voltages and channel length.     

Graphene-based Mach–Zehnder nanophotonics interferometer working as a splitter/switch and as a multiplexer/demultiplexer

We developed and are presenting a graphene-based nanophotonic Mach–Zehnder Interferometer (MZI), which can operate as a signal follower, switch and splitter and as a multiplexer/demultiplexer. Due to the excellent electrical/optical parameters inherent to the graphene, we showed that the device we are presenting can works in several different ways, which can not be supported by MZI based on conventional materials. It is worth mentioning that the operations of the device we have developed take into account the electrical/optical parameters of the graphene, which provide greater versatility and efficiency compared to the MZIs manufactured with conventional materials. In addition, these parameters can be controlled via, for example, gate voltage, so that many operations can be performed in parallel, which is also not possible through the use of conventional materials. Due to its manometric dimensions, this MZI can be integrated within photonic integrated circuits, so that we can use this device in dense wavelength division multiplexing optical communications.     

Quantum dot resonant tunneling FET on graphene

At this paper a field effect transistor based on graphene nanoribbon (GNR) is modeled. Like in most GNR-FETs the GNR is chosen to be semiconductor with a gap, through which the current passes at on state of the device. The regions at the two ends of GNR are highly n-type doped and play the role of metallic reservoirs so called source and drain contacts. Two dielectric layers are placed on top and bottom of the GNR and a metallic gate is located on its top above the channel region. At this paper it is assumed that the gate length is less than the channel length so that the two ends of the channel region are un-gated. As a result of this geometry, the two un-gated regions of channel act as quantum barriers between channel and the contacts. By applying gate voltage, discrete energy levels are generated in channel and resonant tunneling transport occurs via these levels. By solving the NEGF and 3D Poisson equations self consistently, we have obtained electron density, potential profile and current. The current variations with the gate voltage give rise to negative transconductance.     

品质因子可调的石墨烯纳米机械振子

纳米机械振子尺寸小,质量轻,可以用来制作探测力、质量等微小物理量的超灵敏探测器.石墨烯拥有质量轻、密度低和杨氏模量高等特性,被认为是制作纳米机械振子的理想材料.石墨烯纳米机械振子因其具有的谐振频率高、品质因子高和谐振频率可调性高等优势,近年来得到了人们的广泛关注.作为表征纳米机械振子性能的一个重要指标,品质因子越高,意味着纳米机械振子耗散越低,纳米机械振子的灵敏度越高.本文通过微纳加工的工艺制备出一种谐振频率随栅压可调(调节的范围为73 MHz～90 MHz)的石墨烯纳米机械振子样品,研究其在极低温高真空环境下的品质因子与栅极电压之间的关系.实验表明通过栅压调节振子的内部应力,能够使石墨烯纳米机械振子品质因子从220提高到1000.我们的结果为二维材料纳米机械振子的耗散研究提供了一种新的研究思路.     

石墨烯射频器件研究进展

石墨烯因具有优良的电学特性,在半导体行业中受到广泛关注,特别因其具有超薄的结构和极高的载流子迁移率,为解决短沟道效应提供了可能,并且在高速电子领域具有应用前景.近年来,使用石墨烯作为沟道材料制备射频晶体管及射频电路是发挥石墨烯材料优势的一个重要研究方向.制造高性能的射频器件,首先要制备出高性能的石墨烯材料.在金属衬底上沉积均匀的单层石墨烯材料或者在绝缘衬底上外延生长单层、双层石墨烯材料都是获得高质量石墨烯材料的常用方法.器件结构及工艺流程的设计也是提升晶体管射频性能的重要因素,多指栅结构、T型栅结构、埋栅结构以及自对准工艺的发展能够有效改善石墨烯射频晶体管的截止频率及最大振荡频率.石墨烯晶体管独特的电学特性使得其除了可以构造与其他半导体材料电路相似的射频电路结构,还可以构造出功能完整并且结构更加简单的新型射频电路结构.     

锯齿型石墨纳米带叠层复合结的电子输运

基于紧束缚格林函数方法,研究了两半无限长锯齿型石墨纳米带叠层复合结的电子输运性质.结果表明,层间次近邻相互作用、叠层区长度及门电压对复合结的电子透射谱有重要调制作用.层间次近邻相互作用导致复合结的透射谱关于费米能呈现非对称性,与实验结果很好相符.低于费米能第一子能区内周期性出现透射系数为0和1的台阶,呈现全反射与透射现象.随散射结长度增加,透射系数在1内周期性振荡,呈现明显的量子干涉效应.在门电压调控下,低于费米能的透射系数出现了从1到0的转变,类似于开关效应.相关结果对基于石墨烯器件的设计与应用有指导意义.