Summary of reference materials for the determination of the nutrient composition of foods

Certified reference materials (CRMs) play a critical role in validating the accuracy of nutrient data for food samples. A number of available food CRMs of differing matrix composition have assigned concentrations for various nutrients, along with associated uncertainty intervals (UIs) for those values. These CRMs have been used extensively in the United States Department of Agriculture’s (USDA) ongoing National Food and Nutrient Analysis Program (NFNAP) to monitor the accuracy of assays of key foods and nutrients consumed in the United States. A total of 690 assigned values for individual nutrients, including proximates, vitamins, macroelements, microelements, fatty acids, amino acids, and selected phytochemicals (e.g., carotenoids), were compiled from the certificates of analysis for 63 CRMs, and the specified UI in each case was expressed as a percentage of the assigned certified or reference concentration. Across all nutrients, 63.5% of the UIs were less than 10% of the assigned value, 25.5% were 10–20%, and 11% were greater than 20% of the assigned value. The UIs for proximates, minerals, and trace elements were most consistently less than 10% of the assigned value. The relative uncertainties were significantly higher for vitamins, suggesting greater challenges in measuring and certifying these components. These high UIs (greater than 10% assigned value) in the best available reference materials are likely to be indicative of the precision and accuracy that can be obtained by current measurement systems for these components. These data suggest that care must be taken in choosing CRMs to monitor food composition analysis, including evaluating what levels of uncertainty are required in assigned values and which analytical measurement systems for food components need closer examination and improvement. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. Presented at ‘BERM-10’, April 2006, Charleston, SC, USA.     

Certified reference materials for inorganic and organic contaminants in environmental matrices

Chemical measurements often constitute the basis for informed decision-making at different levels in society; sound decision-making is possible only if the quality of the data used is uncompromised. To guarantee the reliability and comparability of analytical data an intricate system of quality-assurance measures has to be put into effect in a laboratory. Reference materials and, in particular, certified reference materials (CRMs) are essential for achieving traceability and comparability of measurement results between laboratories and over time. As in any other domain of analytical chemistry, techniques used to monitor the levels and fate of contaminants in the environment must be calibrated using appropriate calibration materials, and the methods must be properly validated using fit-for-purpose matrix-matched CRMs, to ensure confidence in the data produced. A sufficiently large number of matrix CRMs are available for analysis of most elements, and the group of chemicals known as persistent organic pollutants, in environmental compartments and biota. The wide variety of analyte/level/matrix/matrix property combinations available from several suppliers enables analysts to select CRMs which sufficiently match the properties of the samples they analyse routinely. Materials value-assigned for the so-called emerging pollutants are scarce at the moment, though an objective of current development programmes of CRM suppliers is to overcome this problem.     

Preparation and certification of creatinine and urea reference materials with certified purity as a traceability source in clinical chemical measurements

Purity certified reference materials (CRMs) are playing a key role in metrological traceability, because they form the basis for many traceability chains in chemistry. Recently, the National Metrology Institute of Japan (NMIJ) has developed two purity CRMs for creatinine (NMIJ CRM 6005-a) and urea (NMIJ CRM 6006-a), because the concentrations of these two compounds are frequently measured in clinical laboratories for monitoring the renal functions. In the certification of purity CRMs, it is essential that the materials have been thoroughly characterized for purity, and the purity should preferably be determined directly by a primary method of measurements. In the development of these two CRMs, we used the purified materials as candidates. The certified values were assigned based on the results of two different methods; acidimetric titration and nitrogen determination by the Kjeldahl method. Since both methods cannot distinguish some impurities from the target compounds, major impurities in the candidate materials were also identified, quantified, and subtracted. These CRMs can provide a traceability link between routine clinical methods and SI units. Presented at BERM-11, October 2007, Tsukuba, Japan.     

The deplorable state of the description of the use of certified reference materials in the literature.

A detailed survey of 26 scientific journals showed that journal editors and a majority of authors of the re- c viewed papers seem unconcerned by the importance of correctly reporting their use of certified reference materials (CRMs). Only around 55% of the abstracts surveyed mention the use of CRMs described in these papers. This, however, is of key importance as the abstract of a paper is most widely available in electronic media. Many authors mentioned the use of CRMs in passing, often in incomplete form and without giving any details of the results obtained. Some are confused about the source of the reference material used, as they fail to report the type or the producer of CRMs applied. Others use materials that do not match the samples analyzed or do not see the need to use any CRM, despite the availability of suitable materials. Even in cases where correct data were given for type and producer of the CRMs, frequently the proper use and statistical evaluation are questionable. To improve this situation it is necessary that publishers should give recommendations where and how the use of CRMs should be described.     

Nuclear forensics—metrological basis for legal defensibility

The admissibility of nuclear forensics measurements and opinions derived from them in US Federal and State courts are based on criteria established by the US Supreme Court in the case of Daubert v. Merrell Dow and the 2000 Amendment of Rule 702 of the Federal Rules of Evidence. These criteria are being addressed by new efforts that include the development of certified reference materials (CRMs) to provide the basis for analytical method development, optimization, calibration, validation, quality control, testing, readiness, and declaration of measurement uncertainties. Quality data is crucial for all stages of the program, from R&D, and database development, to actual casework. Weakness at any point in the program can propagate to reduce the confidence of final conclusions. The new certified reference materials will provide the necessary means to demonstrate a high level of metrological rigor for nuclear forensics evidence and will form a foundation for legally defensible nuclear chemical analysis. The CRMs will allow scientists to devise validated analytical methods, which can be corroborated by independent analytical laboratories. CRMs are required for ISO accreditation of many different analytical techniques which may be employed in the analysis of interdicted nuclear materials.     

The deplorable state of the description of the use of certified reference materials in the literature

A detailed survey of 26 scientific journals showed that journal editors and a majority of authors of the reviewed papers seem unconcerned by the importance of correctly reporting their use of certified reference materials (CRMs). Only around 55% of the abstracts surveyed mention the use of CRMs described in these papers. This, however, is of key importance as the abstract of a paper is most widely available in electronic media. Many authors mentioned the use of CRMs in passing, often in incomplete form and without giving any details of the results obtained. Some are confused about the source of the reference material used, as they fail to report the type or the producer of CRMs applied. Others use materials that do not match the samples analyzed or do not see the need to use any CRM, despite the availability of suitable materials. Even in cases where correct data were given for type and producer of the CRMs, frequently the proper use and statistical evaluation are questionable. To improve this situation it is necessary that publishers should give recommendations where and how the use of CRMs should be described.     

CRMs for quality control of determinations of chemical forms of elements in support to EU legislation

The concern for the control of toxic chemical forms of elements in the environment is reflected by an increasing number of analyses performed by research and routine laboratories. The European Commission has recognised the need to include some of these species in the list of dangerous substances to be monitored, e.g. in the marine environment or in groundwater. However, in most cases, the specifications are far from being sufficient in respect to the chemical forms of the element to be determined. Furthermore, these determinations are in most cases based on multi-step analytical techniques which are often prone to errors (e.g. at the extraction, derivatization or separation steps). Certified reference materials (CRMs) certified for their content in chemical forms of elements are, therefore, necessary to ensure the accuracy of these measurements and hence the respect of the regulations. However, the lack of CRMs for speciation analysis hampers the quality control of determinations which in turn leads to an incomparability of data produced; so far the number of CRMs produced by international organisations, e.g. NIST (USA), NIES (Japan), NRCC (Canada) and BCR (Belgium), is very limited and concerns mainly compounds such as e.g. methyl-mercury and butyltin compounds in biological matrices or sediments. The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has started a series of projects for the improvement of speciation analysis in environmental matrices, the final aim of which being the production of a variety of environmental CRMs. The existing EU legislation involving chemical forms of elements is presented, the requirements for the preparation of CRMs for speciation analysis are discussed and an update of the most recent CRMs produced within the Standards, Measurements and Testing Programme (SM&T) is given.     

Proper use of certified reference materials?

Certified reference materials (CRMs) are important quality assurance tools in the laboratory. It is, however, not certain they are always used properly. Several guidelines are available on the use of CRMs, but appear to be mostly unknown. The users thus get very little help on the way to proper use. Many of the problems with CRMs are well known, but that does not mean they have disappeared. Better use of CRMs will require the involvement of producers and analytical societies, e.g. the AOAC. Editors of international analytical journals could have a great influence on how CRM results and other QA data are treated in publications.     

Certified reference materials as a quality tool in food control: much used—often misused—sometimes abused

Certified reference materials (CRMs) are important tools in the quality control of food analyses. There are, however, many ways in which CRMs can be abused and misused. It can be due to ignorance, as well as to overuse of expensive materials. The major drawback of CRMs is probably that the analyst knows the level of the analyte. The statistical evaluation of CRM results in reports and publications is often limited to a comparison between the found and the certified levels, which yields little, and sometimes erroneous, information. Recoveries based on CRMs often give a picture that is far too bright, with little consideration of uncertainties. The way the use of CRMs is described in most scientific journals is often very crude and shows that CRMs are seldom used to their full capacity. The objective of this paper is to try to summarise the ways in which a CRM can be misused and thereby put into focus how to make better use of such materials. It also gives examples on how to evaluate CRMs, using a procedure that was recently introduced by the Nordic Committee on Food Analysis.     

CRMs for quality control of determinations of chemical forms of elements in support to EU legislation

The concern for the control of toxic chemical forms of elements in the environment is reflected by an increasing number of analyses performed by research and routine laboratories. The European Commission has recognised the need to include some of these species in the list of dangerous substances to be monitored, e.g. in the marine environment or in groundwater. However, in most cases, the specifications are far from being sufficient in respect to the chemical forms of the element to be determined. Furthermore, these determinations are in most cases based on multi-step analytical techniques which are often prone to errors (e.g. at the extraction, derivatization or separation steps). Certified reference materials (CRMs) certified for their content in chemical forms of elements are, therefore, necessary to ensure the accuracy of these measurements and hence the respect of the regulations. However, the lack of CRMs for speciation analysis hampers the quality control of determinations which in turn leads to an incomparability of data produced; so far the number of CRMs produced by international organisations, e.g. NIST (USA), NIES (Japan), NRCC (Canada) and BCR (Belgium), is very limited and concerns mainly compounds such as e.g. methyl-mercury and butyltin compounds in biological matrices or sediments. The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has started a series of projects for the improvement of speciation analysis in environmental matrices, the final aim of which being the production of a variety of environmental CRMs. The existing EU legislation involving chemical forms of elements is presented, the requirements for the preparation of CRMs for speciation analysis are discussed and an update of the most recent CRMs produced within the Standards, Measurements and Testing Programme (SM&T) is given.     

Production of three certified reference materials for water content based on mixed solutions of butanol, xylene and propylene carbonate

Certified reference materials (CRMs) for water content with good accuracy and homogeneity are required for calibration or validation of the Karl Fischer titration and for establishing the traceability of water content results. Three such CRMs were produced and certified: GBW 13512, 13513 and 13514 are based on solvent mixtures consisting of butanol, xylene and propylene carbonate with water contents of 10.01, 1.067 and 0.139?mg/g, respectively, certified by the Karl Fischer coulometric and volumetric methods. These CRMs were prepared, dispensed and sealed under a humidity equal to the equilibrated humidity of their headspace. In this way, the between-bottle homogeneity uncertainty (u _H,rel) could be kept as low as u _H,rel?=?0.12?% for GBW 13512. The certification methods, that is, Karl Fischer coulometric and volumetric methods, were calibrated using in-house water standards prepared by gravimetry. The results were traceable to the SI unit of mass. The relative deviation of the water contents between the two methods for GBW 13512 was only 0.05?%. The expanded uncertainty (U, k?=?2) of three CRMs was 0.12, 0.024 and 0.012?mg/g, respectively. These CRMs for water content with good accuracy can be applied in the calibration or validation of measurement procedures to ensure accurate and comparable results.     

不锈钢、耐热钢系列化学分析标准物质的研制

介绍0Cr18Ni10Ti、OCr18Ni12M02Ti、OCr17Ni4Cu4Nb、1Cr25Ni20Si2、1Cr13和2Cr13等6种典型不锈钢和耐热钢系列化学分析用标准物质的成分设计、制备工艺、定值方法及数据处理。采用中频感应炉冶炼．用F方差法检验均匀性,8家实验室采用不同分析方法协同定值。所研制的系列标准物质定值元素多,多数元素含量呈梯度分布,既可单独使用,也可成套使用。     

Reference materials and certified reference materials for spectrometry in Romania

Several reference materials (RMs) and certified reference materials (CRMs) are widely used in Romania as measurement standards in different spectrochemical measurements. Among them, single element standard solution certified for their mass concentration play a key role in ensuring the required traceability of results expressed in this measurement unit. A short review of the locally available elemental RMs and CRMs used in atomic spectrometry or in other analytical techniques where aqueous standard solutions are required (usually called RMs or CRMs for spectrometry) is given. The experience of the INM in preparation and certification of such materials is described. Some aspects regarding their use for ensuring the accuracy and for confirmation of the traceability of analytical measurements, especially through calibration and metrological validation of main instrument performances, are discussed.     

Reference materials and certified reference materials for spectrometry in Romania

Several reference materials (RMs) and certified reference materials (CRMs) are widely used in Romania as measurement standards in different spectrochemical measurements. Among them, single element standard solution certified for their mass concentration play a key role in ensuring the required traceability of results expressed in this measurement unit. A short review of the locally available elemental RMs and CRMs used in atomic spectrometry or in other analytical techniques where aqueous standard solutions are required (usually called RMs or CRMs for spectrometry) is given. The experience of the INM in preparation and certification of such materials is described. Some aspects regarding their use for ensuring the accuracy and for confirmation of the traceability of analytical measurements, especially through calibration and metrological validation of main instrument performances, are discussed.     

冶金标准物质稳定性的评价

在对冶金标准物质试验研究的基础上,对冶金标准物质稳定性作出了判断。认为只要在规定的保管、储存条件下,冶金标准物质具有比较长期的稳定性。有些标准物质随时间增长,其特性值呈下降的趋势,但变化非常缓慢,只要保管、储存条件好,可以忽略不计;对含有易挥发、易氧化、易吸水、易吸CO_2成分的标准物质,则要定期监测其变化,发布给用户。     

Lead isotopic compositions of environmental certified reference materials for an inter-laboratory comparison of lead isotope analysis.

Lead isotope ratios, viz. 207Pb/206Pb and 208Pb/206Pb, of the commercially available certified reference materials (CRMs) issued in Japan are presented with an objective to provide a data set, which will be useful for the quality assurance of analytical procedures, instrumental performance and method validation of the laboratories involved in environmental lead isotope ratio analysis. The analytical method used in the present study was inductively coupled plasma quadrupole mass spectrometry (ICPQMS) preceded by acid digestion and with/without chemical separation of lead from the matrix. The precision of the measurements in terms of the relative standard deviation (RSD) of triplicated analyses was 0.19% and 0.14%, for 207Pb/20Pb and 208Pb/206Pb, respectively. The trueness of lead isotope ratio measurements of the present study was tested with a few CRMs, which have been analyzed by other analytical methods and reported in various literature. The lead isotopic ratios of 18 environmental matrix CRMs (including 6 CRMs analyzed for our method validation) are presented and the distribution of their ratios is briefly discussed.     

Certified reference materials for the quality control of environmental analysis within the standards,measurements and testing programme (formerly BCR)

A great number of analyses is performed every year, the results of which are used for many purposes, e.g. the quality of goods and food, the status of quality of the environment or the health of patients. The accuracy of these results is a prerequisite for a good interpretation of the data obtained. One of the most powerful tool for achieving quality control of chemical analysis is to use reference materials (RMs) and certified reference materials (CRMs). These materials are necessary for one or more of the following items: method validation (CRMs), monitoring of the state of statistical control (RMs), samples in inter-comparisons (RMs), etc. The requirements and use of RMs and CRMs in chemical analysis are described, with special emphasis on environmental analysis, and some examples of environmental materials currently in production within the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission are given.     

A mussel tissue certified reference material for multiple phycotoxins. Part 1: design and preparation

The development of multi-analyte methods for lipophilic shellfish toxins based on liquid chromatography–mass spectrometry permits rapid screening and analysis of samples for a wide variety of toxins in a single run. Validated methods and appropriate certified reference materials (CRMs) are required to ensure accuracy of results. CRMs are essential for accurate instrument calibration, for assessing the complete analytical method from sample extraction to data analysis and for verifying trueness. However, CRMs have hitherto only been available for single toxin groups. Production of a CRM containing six major toxin groups was achieved through an international collaboration. Preparation of this material, CRM-FDMT1, drew on information from earlier studies as well as improved methods for isolation of toxins, handling bulk tissues and production of reference materials. Previous investigations of stabilisation techniques indicated freeze-drying to be a suitable procedure for preparation of shellfish toxin reference materials and applicable to a wide range of toxins. CRM-FDMT1 was initially prepared as a bulk wet tissue homogenate containing domoic acid, okadaic acid, dinophysistoxins, azaspiracids, pectenotoxin-2, yessotoxin and 13-desmethylspirolide C. The homogenate was then freeze-dried, milled and bottled in aliquots suitable for distribution and analysis. The moisture content and particle size distribution were measured, and determined to be appropriate. A preliminary toxin analysis of the final material showed a comprehensive toxin profile.     

Certification of reference materials for inorganic trace analysis: the INCT approach

This paper presents the work done by the Institute of Nuclear Chemistry and Technology (INCT), Warsaw on a procedure of the certification of matrix reference materials (CRMs) for inorganic trace analysis. The INCT has been involved in preparation and certification of that type of CRMs since 1986 till now. The certification of CRMs is performed on the basis of statistical evaluation of the data obtained from the worldwide interlaboratory comparison. The initially adopted certification procedure has been developed, and the final shape is presented and discussed. The modifications are connected with the new demands of the international standards. The results of analysis of candidate CRMs obtained by the potentially primary procedures based on radiochemical neutron activation analysis (RNAA) and results of analysis of CRM accompanying candidate RMs are applied in the certification process for quality assurance purpose.     

Nuclear analytical methods in quality control of microanalysis

Quantitative calibration and quality control have been a major bottleneck in microanalysis due to the lack of natural-matrix CRMs certified at sample sizes compatible with those of unknown samples. In this paper, a solution is described to characterize sampling behavior for individual elements, so as to identify elements homogeneous enough at stated sample size levels in given CRMs/RMs. By using a combination of several nuclear analytical techniques, INAA-EDXRF-μPIXE, sampling behavior for individual elements can be characterized at sample size levels from grams down to pg. Natural-matrix CRMs specifically for QC of microanalysis may thus be created. Additional information in certificates of these new generation CRMs is imagined. This revised version was published online in July 2006 with corrections to the Cover Date.