Evaluation of Accuracy for the Measurement of Octanol–Water Partition Coefficient by MEEKC

Microemulsion electrokinetic chromatography (MEEKC) has been widely used as an indirect tool to measure octanol–water partition coefficients (logP _ow) of various kinds of compounds. In this paper, we present for the first time a mathematical model of the precision of logP _ow (ΔlogP _ow) as a function of the deviation of migration time (Δt _m) in MEEKC, and more importantly evaluated the accuracy of the MEEKC. Our model shows that for a given microemulsion system, there is an interval of migration times, where a high precision in the determination of logP _ow can be obtained. However, when the migration time approaches either the migration time of the electroosmotic flow or that of the microemulsion phase, the precision of logP _ow deteriorates rapidly. The model was experimentally verified by the microemulsion system with migration times of 6.50 and 32.00?min for the electroosmotic flow and microemulsion phase, respectively, and we found the useful logP _ow interval to be 0.50–5.50. The paper also demonstrates that the calibration constants between migration times t _m and predicted logP _ow values could be transferred with high accuracy from one MEEKC system to another as long as both systems are set up to use the same operational parameters.     

Determination of Octanol–Water Partition Coefficients by MEEKC Based on Peak-Shift Assay

A novel microemulsion electrokinetic chromatography method based on peak-shift assay (p-s MEEKC) has been developed for the determination of octanol–water partition coefficients (log P _o/w) of compounds. The log P _o/w values of 12 compounds were determined. The RSD of obtained values were less than 5.0% except 4-tert-butylphenol (RSD = 5.9%). All log P _o/w values of the investigated compounds measured by p-s MEEKC were within 0.51 logarithm unit variation as compared to the literature values, with mean difference of 0.27. Compared to the conventional MEEKC method, the novel method does not suffer from the deficiencies related to the reference compounds and migration time of microemulsion phase, and showed the potential of being an alternative method for the determination of log P _o/w values of compounds without reference compounds.     

Oxidized Multiwalled Carbon Nanotubes as an SPME Fiber Coating for Rapid LC–UV Analysis of Benzimidazole Fungicides in Water

The potential of oxidized multiwalled carbon nanotubes as a fiber coating for solid-phase microextraction of carbendazim, thiabendazole, and thiophanate-methyl from aqueous solution has been investigated, and the mechanism of adsorption has been explored. When an analytical method combining SPME with high-performance liquid chromatography was applied to real environmental water samples, recoveries of the spiked compounds was 75.7–104.5%, the linear range was 5–500 ng mL^?1, the squared correlation coefficients (r ²) were from 0.9978 to 0.9984, LOD were from 0.3 to 1.5 ng mL^?1, and RSD were from 2.3 to 10.5%.     

Aqueous Solubilities, Infinite Dilution Activity Coefficients and Octanol–Water Partition Coefficients of Tricyclic Analogs of Acyclovir

Solubilities of tricyclic analogs of acyclovir have been determined in water at 25, 35, and 45°C and in octanol, water-saturated octanol, and octanol-saturated water at 25°C. Octanol-water partition coefficients were determined at 25°C. Melting temperatures and molar enthalpies of fusion were measured. Activity coefficients in water, octanol, and in aqueous octanol solutions were determined and are discussed. The effect of hydrophilic and hydrophobic substituents in the tricyclic analogs on their thermodynamic properties are discussed. The standard Gibbs energy of transfer between the saturated phases were found to correlate with known values of the melting point of the solvents and the solubilities of the solute. For a number of the compounds examined, correlations between the minimum inhibitory concentration against the herpes simplex virus type 1 (HSV-1) and type 2 (HSV-2), varicella-zoster virus (VZV), thymidine kinase-deficient (TK^–) strains of VZV and were established. Detailed conclusions have been derived concerning the relationships between the structure and the thermodynamic parameters of the compounds examined.     

Rapid Microwave-promoted Base-free Suzuki Coupling Reaction of Sodium Tetraphenylborate with Hypervalent Iodonium Salts in Water

The palladium chloride-catalyzed Suzuki coupling reaction of sodium tetraphenylborate with hypervalent iodonium salts was achieved under microwave irradiation in water without base in excellent yield. A convenient and rapid method for formation of carbon-carbon bonds was afforded.     

Raney Nickel–Catalyzed Hydrogenation of Unsaturated Carboxylic Acids with Sodium Borohydride in Water

A mild, selective, and green method for the reduction of unsaturated carboxylic acids with sodium borohydride–Raney nickel (W6) system in water is reported. This method is practical and safe and avoids use of organic solvents.     

Equations for the Partition of Neutral Molecules, Ions and Ionic Species from Water to Water–Ethanol Mixtures

Equations set up for the transfer of neutral solutes from water to water?Cethanol mixtures can also be used to correlate the transfer of ions and ionic species, as log₁₀ P, where P is the partition coefficient. Only two additional terms are required in the equations, one for anions and one for cations. The extended equations can fit log₁₀ P values for anions and cations with a standard deviation of about 0.2 to 0.3 log units for transfer of 41 anions and cations from water to various water?Cethanol mixtures from 10?% ethanol to 100?% ethanol by volume. The log₁₀ P values for carboxylate anions and protonated amine cations as obtained from the variation of pK _a with solvent are quite compatible with log₁₀ P values for simple anions and cations.     

Effects of Modified Sodium Lignosulfonate on Rheological Properties of Coal–Water Slurry with Low-Rank Coal

Coal–water slurry (CWS) is a new type of oil-replaceable liquid fuel with low pollution. The cost of CWS preparation will be greatly reduced if low-rank coal is used as the preparation material. In this work, chemical modification was used to prepare the modified sodium lignosulfonate (SL-M) hyper-dispersant, having larger molecular weight and more sulfonic groups than sodium lignosulfonate (SL), which was widely used for preparation of CWS from low-rank Shenhua coal due to its rich source and lower price. Effects of preparation conditions and molecular structure of SL-M on rheological properties of CWS were studied by using Haak rheometer. Results showed that the CWS transfered from viscous fluid to swelling fluid when the coal particle size decreased. The consistency coefficient of CWS decreased with the increase of additive dosage. The rheological properties of CWS became much better with the addition of the stabilizer, sodium carboxymethyl cellulose (CMC), compared with that of CWS without CMC. The prepared CWS changed from yield viscous fluid into yield swelling fluid with the increase of the molecular weight of SL-M. The rheological index was lower than 1 when the sulfonic group content was low, then it was increased with the increase of the sulfonic group content.     

Rapid Microwave‐Promoted Base‐Free Suzuki Coupling Reaction of Sodium Tetraphenylborate with Hypervalent Iodonium Compounds in Water

The palladium chloride–catalyzed Suzuki coupling reaction of sodium tetraphenylborate with hypervalent iodonium salts and iodanes was achieved under microwave irradiation in water without base. A convenient and rapid method for formation of carbon–carbon bonds had excellent yields.     

Rapid Speciation of Lead in Water by High-Performance Liquid Chromatography–Inductively Coupled Plasma Mass Spectrometry

The rapid speciation of lead is reported by high performance liquid chromatography and inductively coupled plasma – mass spectrometry. The separation of inorganic lead, trimethyllead, triethyllead and triphenyllead was achieved within 3.5 minutes on a C₁₈ column using a gradient program of methanol and water containing 5 milligrams per liter sodium 1-pentanesulfonate at pH 5. The limits of detection for inorganic lead, trimethyllead, triethyllead, and triphenyllead were 0.01, 0.02, 0.02, and 0.02 micrograms per liter, respectively. The accuracy of the method was verified by the analysis of water (GSBZ 50009-88) and seawater (GBW (E) 080040) certified reference materials. The method was also employed for the analysis of water samples; inorganic lead was measured in river water.     

Efficient Synthesis of bis- and tris-Indolylalkanes Catalyzed by a Brønsted Acid–Surfactant Catalyst in Water

A simple and efficient synthesis of bis- and tris-indolylalkanes from carbonyls (aldehydes/ketones) and indoles with excellent yields in the presence of dodecylsulphonic acid (DSA) in water at room temperature is described. The catalyst is also applicable for the synthesis of 3,3-di(3-indolyl)oxindoles. The dodecylsulphonic acid acts as both Brønsted acid and surface-active agent in the reaction mixture.     

Multiwalled Carbon Nanotubes as SPE Adsorbents for Simultaneous Determination of Seven Sulfonylurea Herbicides in Environmental Water by LC–MS–MS

An effective and rapid method was developed for simultaneous determination of seven sulfonylurea herbicides in environmental water using multiwalled carbon nanotubes as solid-phase extraction sorbent coupled with liquid chromatography–tandem mass spectrometry. Important parameters influencing the extraction efficiency such as pH of the sample solution, flow rate of sample loading, the eluent and its volume were optimized. Under optimum conditions, good linearity was obtained for all herbicides (r ² > 0.99) over the range of 0.05–5,000 ng L^?1, and precisions (RSD) for nine replicate measurements of a standard mixture of 200 ng L^?1 were 1.9–7.4%. The limits of detection and quantification were 0.01–0.20 and 0.05–1.00 ng L^?1, respectively. The proposed method was successfully applied to the analysis of tap water, spring water, ground water and well water, and mean recoveries for seven analytes at three spiked concentration levels were from 81.5 to 110.5% with RSDs between 0.3 and 7.0%. The results showed that the established method has wide application to analyze sulfonylurea herbicides at trace level in water.     

Rapid and Sensitive LC–MS–MS Method for the Simultaneous Estimation of Alfuzosin and Dutasteride in Human Plasma

A simple, rapid, specific and sensitive liquid chromatography–tandem mass spectrometric method has been developed and validated for the simultaneous estimation of alfuzosin and dutasteride in human plasma. Both alfuzosin and dutasteride were extracted from human plasma by solid-phase extraction using terazosin and finasteride as the internal standards for alfuzosin and dutasteride, respectively. Chromatographic separation of analytes and their respective internal standards was carried out using a Hypurity C18 (50 × 4.6 mm i.d., 5 μm particle size) column followed by detection using an applied biosystems API 5000 mass spectrometer with a UPLC as the front end. The method involves a rapid solid phase extraction from plasma, simple isocratic chromatographic conditions and mass spectrometric detection in the positive ionization mode using multiple reactions monitoring that enables detection down to low nanogram levels with a total run time of 2.5 min only. The method was validated over a range of 0.25–20.0 ng mL^?1 for alfuzosin and 0.1–10.0 ng mL^?1 for dutasteride. The absolute recoveries for alfuzosin (65.57%), dutasteride (103.82%), terazosin (69.38%) and finasteride (102.25%) achieved from spiked plasma samples were consistent and reproducible. Acceptable precision and accuracy were obtained for concentrations over the standard curve ranges. Due to the short run time of 2.5 min it was possible to analyze a throughput of more than 180 human plasma samples per day. The validated method can be successfully used to analyze human plasma samples for application in pharmacokinetic, bioavailabilty or bioequivalence studies. As an example the application of this validated method to a bioequivalence study is also illustrated.     

Radiation-Chemical Purification of Water from Petroleum Products as Studied by Gas Chromatography–Mass Spectrometry

The radiation-chemical purification of water from petroleum products (diesel oil, motor oil, and residual fuel oil) was studied by gas chromatography–mass spectrometry. The removal of -radiolysis products with molecular weights from 40 to 500 amu was examined. Organic compounds (toluene, ethylbenzene, xylenes, other alkylbenzenes, C₁₄–C₁₈ n-alkanes, naphthalene, methylnaphthalenes, and tetralin) were virtually completely removed at a dose of 25 kGy. An interpretation of the data was presented.     

Determination of Iron in Layered Crystal Sodium Disilicate and Sodium Silicate by Flame Atomic Absorption Spectrometry with Boric Acid as a Matrix Modifier

As a novel type builder for phosphate-free detergent1,2, layered crystal sodium disilicate has many advantages over other builders for phosphate detergents. The raw material of layered crystal sodium disilicate is sodium silicate. Because of the effects o…     

Solvation Properties of Aliphatic Alcohol–Water and Fluorinated Alcohol–Water Solutions for Amide Molecules Studied by IR and NMR Techniques

Solvation properties of aliphatic alcohol–water and fluorinated alcohol–water solutions were probed by amide molecules as solutes using infrared (IR) and ¹H and ¹³C NMR techniques. These include four alcohols: ethanol (EtOH), 2-propanol (2-PrOH), 2,2,2-trifluoroethanol (TFE), and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and three amides: N-methylformamide (NMF), N-methylacetamide (NMA) and N-methylpropionamide (NMP). The hydrogen bonds of the amide carbonyl oxygen with water are gradually weakened as the alcohol content increases. This decreases in the order of HFIP > TFE ≈ 2-PrOH > EtOH. In TFE– and HFIP–water solutions, the hydrogen bond between the amide amino hydrogen and water is also gradually broken with increasing x _A. This trend is more notable in the order of NMP > NMA > NMF. The hydrophobic moieties of the amide methyl and ethyl groups are solvated by the fluoroalkyl groups of fluorinated alcohols due to the hydrophobic interaction among them. Thus, the steric hindrance generated by the solvated alkyl group of amides promotes the breaking of the hydrogen bonds between amide and water.     

Rapid and sensitive method for the determination of acetaldehyde in fuel ethanol by high-performance liquid chromatography with UV–Vis detection

A high-performance liquid chromatography (HPLC) method for the determination of acetaldehyde in fuel ethanol was developed. Acetaldehyde was derivatized with 0.900 mL 2,4-dinitrophenylhydrazine (DNPHi) reagent and 50 L phosphoric acid 1 mol L^–1 at a controlled room temperature of 15°C for 20 min. The separation of acetaldehyde-DNPH (ADNPH) was carried out on a Shimadzu Shim-pack C₁₈ column, using methanol/LiCl_(aq) 1.0 mM (80/20, v/v) as a mobile phase under isocratic elution and UV–Vis detection at 365 nm. The standard curve of ADNPH was linear in the range 3–300 mg L^–1 per injection (20 L) and the limit of detection (LOD) for acetaldehyde was 2.03 g L^–1, with a correlation coefficient greater than 0.999 and a precision (relative standard deviation, RSD) of 5.6% (n=5). Recovery studies were performed by fortifying fuel samples with acetaldehyde at various concentrations and the results were in the range 98.7–102%, with a coefficient of variation (CV) from 0.2% to 7.2%. Several fuel samples collected from various gas stations were analyzed and the method was successfully applied to the analysis of acetaldehyde in fuel ethanol samples.