对称AB两嵌段共聚物在均聚物C中的自组装

通过自洽平均场理论计算,对对称AB两嵌段共聚物在均聚物C中形成的胶束进行了研究. 在C对A、B组分没有选择性相互作用的情况下,我们观察到了两嵌段共聚物所形成的胶束形状为各向异性的、由间隔A/B层相区构成的类椭球结构. 我们系统考察了胶束的长短径之比与胶束体积、组分间相互作用、均聚物长度之间的关系. 结果表明,当固定组分间相互作用时,胶束的长短径之比随体积变大而减小;当体积增大至一临界值,胶束层数增加,长短径之比发生突变并增大. 给定胶束的结构和体积,增加两嵌段共聚物的不相容性,胶束长短径之比增加并且最终趋于平缓;当固定相互作用及胶束体积时,均聚物的长度越小,长短径之比越大.     

全亲水性嵌段共聚物及其超分子自组装

本文介绍了全亲水性嵌段共聚物(DHBCs)的定义与特点.根据不同的环境敏感自组装机理,分类详述了不同DHBCs的结构及其超分子自组装行为,并探讨了相应的应用现状与前景.     

Quinoline Photobasicity: Investigation within Water-Soluble Light-Responsive Copolymers

Quinoline photobases exhibit a distinctly higher pK_a in their electronically excited state than in the ground state, thereby enabling light-controlled proton transfer reactions, for example, in molecular catalysis. The absorption of UV light translates to a pK_a jump of approximately 10 units, as established for small-molecule photobases. This contribution presents the first synthesis of quinoline-based polymeric photobases prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization. The integration of quinolines as photobase chromophores within copolymers offers new possibilities for light-triggered proton transfer in nanostructured materials, that is, in nanoparticles, at surfaces, membranes and interfaces. To exploit the light-triggered reactivity of photobases within such materials, we first investigated how the ground- and excited-state properties of the quinoline unit changes upon polymer integration. To address this matter, we combined absorption and emission spectroscopy with time-resolved transient-absorption studies to reveal photoinduced proton-transfer dynamics in various solvents. The results yield important insights into the thermodynamic and kinetic properties of these polymeric quinoline photobases.     

Thermal Behaviour of Glycidyl Methacrylate Homopolymers and Copolymers

The paper describes the effect of molecular mass and copolymer composition on thermal behaviour of homopolymers and copolymers of glycidyl methacrylate and methyl methacrylate. The polymerisation was done by using group transfer polymerization (GTP) and free radical techniques. A multistep decomposition was observed in polymers prepared by free radical technique indicating the presence of weak linkages in the backbone. Copolymers prepared by GTP had fewer weak sites and degraded in single step by a random chain scission.This revised version was published online in November 2005 with corrections to the Cover Date.     

Crystal Design of Barium Sulfate using Double-Hydrophilic Block Copolymers

Peach, peanut, fiber, and flower (see picture) crystal morphologies are achieved from the precipitation of simple minerals in the presence of specifically adsorbing polymers. These crystal design effects are illustrated using BaSO(4) and double-hydrophilic block copolymers, the latter featuring carboxylate, sulfonate, phosphonate, and aspartic acid groups.     

Synthesis and Characterization of Styrene-Isoprene Diblock Copolymers

A simple reusable apparatus for the synthesis of up to 40 g quantities of poly(styrene-b-isoprene) diblock copolymers of reasonably low (1.2 to 1.5) polydispersity has been described. The diblock copolymers synthesized were characterized by gel permeation chromatography (GPC), membrane osmometry, viscosimetry, and nuclear magnetic resonance (NMR) spectroscopy. Number-average molecular weights (M _n) calculated from the raw GPC chromatographs of the diblock copolymers using the summation method and M versus elution volume plots for polystyrene and polyisoprene standards agree well with those measured experimentally with osmometry. It is suggested that for polydisperse block copolymers this method is simpler than the use of a universal calibration curve. Mark-Houwink constants K ans a for polyisoprene having 18% (1,2-), 66% (3,4-), and 16% (1,4-) microstructure were found to be 3.2 × 10^?4 dL/g and 0.67, respectively, in THF at 25°C. In toluene at 30°C, K = 2.0 × 10^?4 dL/g and α = 0.7 were obtained. The diblock copolymers had 26% (1,2-), 60% (3,4-), and 14% (1,4-) microstructure in the isoprene segments, and the values of K and a for these copolymers (PS > 50%, M 20.0 × 10³) in THF at 25°C were 9.0 × 10^?5 dL/g and 0.75. For M < 20.0 × 10³ the value of α was 0.5. The experimental values of [η] were found to be lower than those calculated theoretically, presumably due to the polydisperse nature and the biellipsoidal configuration of the diblock copolymers.     

Conformations of Amphiphilic Diblock Star Copolymers

We study conformations assumed by single diblock star copolymers in a poor solvent by means of the Gaussian variational theory and Monte Carlo simulation in continuous space. Cases of stars with internal and external hydrophobic blocks are analysed. While in the former case the collapsed state has an obvious micellar shape, the latter case exhibits two nontrivial conformational structures. Apart from the equilibrium state of a globular hydrophobic core with hydrophilic daisy loops, one also finds here a metastable state of outstretched hydrophilic blocks with hydrophobic subglobules at their ends. Such a state appears to be rather long‐lived during the kinetics of collapse of a swollen star. The plots of monomer densities and other observables computed by means of both techniques are found to be in good agreement with each other.     

Structure and Dynamics of Blends of Diblock Copolymers

The melt state rheological behavior of a series of blends of a lamellae‐forming nearly symmetrical polystyrene‐polyisoprene (PS‐PI) diblock copolymer with a sphere‐forming highly asymmetrical PS‐PI diblock copolymer is correlated to their structure obtained from small‐angle neutron scattering (SANS). The exponential composition dependence of the relaxation of fluctuations associated with the disordered asymmetrical diblock is similar to that observed in solutions of star polymers. Further, the zero‐shear viscosity of the blends in the disordered state exhibits unusually strong composition dependence. These dynamic properties are closely linked with the SANS‐based structural data that suggest strong compositional fluctuations, even in the disordered state.     

两嵌段共聚物反相溶剂中组装结构转变动力学的模拟研究

利用耗散粒子动力学方法,分别研究了不同结构的组装体在改变溶剂的选择性后,在溶液及界面上的结构演变动力学.模拟结果表明,在改变溶剂的选择性后,大球形胶束在溶液中转变形成反向球形胶束,而在界面上则转变形成反向环状胶束,当前模拟结果与已有的实验结果一致.此外,模拟结果还预测出,在改变溶剂的选择性后,环状胶束在溶液中转变形成反向环状胶束,而在界面处受限形成反向的支化蠕虫状胶束;蠕虫状胶束则在溶液中转变形成反向环状胶束,而在界面处受限形成多层纳米球结构;囊泡在溶液中转变形成分散的小胶束聚集体,而在界面处受限形成球形的补丁纳米粒子.     

Microphase Separation of Semiflexible Ring Diblock Copolymers

Aiming at the difficult problem of solving the conformation statistics of complex polymers, this study presents a novel and concise conformation statistics theoretical approach based on Monte Carlo and Neural Network method. This method offers a new research idea for investigating the conformation statistics of complex polymers, characterized by its simplicity and practicality. It can be applied to more complex topological structure, more higher degree of freedom polymer systems with higher dime...     

两嵌段聚合物自组装微观形貌中的网状结构

嵌段聚合物由于不同嵌段热力学不相容而形成微观相分离,进而发生自组装排列成规则有序的微观结构,其中网状结构是自组装微观结构中的复杂结构,具有令人瞩目的特性,在纳米科技领域应用价值极高,备受各国研究者的青睐。本文介绍了嵌段聚合物自组装原理和网状结构的特点,重点综述了两嵌段聚合物自组装结构中常见的三种网状结构的发展、制备方法以及在纳米科技中的应用,并指出当今网状结构的研究热点,预测该领域的发展趋势。     

Nucleation and Crystallization of PLDA-b-PE and PLLA-b-PE Diblock Copolymers

The nucleation and crystallization of two types of strongly segregated poly(lactide)-block-polyethylene diblock copolymers with an approximate 50/50 composition has been investigated. One material contains an amorphous PLDA block (PLDA-b-PE) and the other contains a semicrystalline PLLA block (PLLA-b-PE). The overall isothermal crystallization rate of the PLLA block was slowed down as compared to homo-PLLA by the covalently bonded PE chains that were molten at the PLLA crystallization temperatures. This crystallization rate depression of the PLLA block produces a coincident crystallization process when PLLA-b-PE is cooled down from the melt at rates larger than 2 °C/min. The overall crystallization rate of the PE block is faster when it is covalently bonded to previously crystallized PLLA than when it is attached to a rubbery PDLA block, this results from a nucleation effect of PLLA on the PE block. Polarized Light Optical Microscopy (PLOM) confirmed the confined nature of the crystallization process within lamellar microdomains for both diblock copolymers, since neither PLLA nor PE are capable of breaking out and spherulites can not be formed.     

PDMS-b-PEO两亲性嵌段共聚物的合成及溶液性质

通过正丁基锂(n-BuLi)引发的六甲基环三硅氧烷(D3)阴离子开环聚合以及单硅氢封端聚二甲基硅氧烷(PDMS)与烯丙基聚氧乙烯醚(PEO)的硅氢加成反应, 合成得到了一系列分子量分布窄的PDMS-b-PEO两亲性嵌段共聚物. 利用凝胶渗透色谱(GPC)、傅里叶变换红外(FTIR)光谱、氢核磁共振谱(1H-NMR)表征了嵌段共聚物的结构组成. 通过表面张力仪测定得到了不同结构嵌段共聚物的平衡表面张力及临界胶束浓度(cmc). 结果显示, 该系列嵌段共聚物的cmc值不仅受到憎水性嵌段的影响, 同时也受嵌段共聚物的体积效应以及嵌段共聚物的几何形状(即嵌段共聚物各嵌段的比例)的影响, PDMS-b-PEO两嵌段共聚物的cmc值表现出了随憎水嵌段增加而相应增加的趋势. 通过透射电子显微镜(TEM)表征发现, PDMS-b-PEO嵌段共聚物在选择性溶剂水中会自组装形成球状、棒状以及囊泡状的聚集体.     

RAFT-细乳液法合成PMMA-b-PGMA两嵌段共聚物

以甲基丙烯酸甲酯(MMA)为单体,S-正十二烷基-S′-(α,α′-二甲基-α″-乙酸基)三硫代碳酸酯为链转移剂,经RAFT/细乳液法制得PMMA(PDI 1.44)。以PMMA细乳液为种子乳液,与甲基丙烯酸缩水甘油酯聚合合成了PMMA-b-PGMA两嵌段聚合物(1),其结构和性能经¹H NMR, FT-IR, GPC和DSC确证。结果表明：1的PDI为2.04,玻璃化转变温度为92.35 ℃。     

Toroidal Micelles of Uniform Size from Diblock Copolymers

Uniform nanodonuts: Stable toroidal micelles that have a highly uniform size and shape spontaneously self‐assemble from a selective THF/ethanol solvent mixture (see 3D AFM image). The donut‐shaped micelles can be used as a template to grow gold nanoparticles, which form along the ring surface.

     

Synthesis and Characterization of Water-Soluble Starch-Acrylamide Graft Copolymers

A series of water-soluble starch-polyacrylamide graft copolymers (ST-g-PAM) were prepared by Ce⁴⁺-initiated graft copolym-erizations of acrylamide (AM) onto starch (ST) dissolved in water at 30°C. The copolymers were found to contain 3-33% (wt) of ST. The structure of the copolymers, including the average number of grafts per chain and the efficiency of the initiator, was determined by acid-catalyzed degradation of the ST followed by size exclusion chromatography (SEC) analysis of the PAM chains and was found to be consistent with the presence or absence of free ST in the polymerization product prior to hydrolysis. The average number of grafts per starch molecule was found to be three or less, depending on conditions. The initiator efficiency (6–43%) was shown to decrease with increasing [Ce⁴⁺] and decreasing [AM], and this was found to be qualitatively in accord with the proposed mechanism of initiation and polymerization. The low efficiency was shown to be due, in part, to the low rate of reaction of Ce⁴⁺ compared to the polymerization rate. The copolymers were characterized by ultra-centrifugation, SEC, and viscometry.     

Modelling of the Phase Separation Behaviour of Semiflexible Diblock Copolymers

Silver salts are dissolved in poly(butyl methacrylate) to derive polymer electrolytes via coordinative interaction between the silver ion and the carbonyl oxygen atom. The dissolved silver ions react subsequently with propylene to form reversible silver/olefin complexes that can be utilized as olefin carriers for facilitated olefin transport. The complexation behavior and its effects on propylene transport were investigated by means of Raman and FT‐IR spectroscopy, as well as dielectric thermal analysis.     

嵌段聚合物PGMA-b-PDEAEMAx的合成及其CO2诱导解组装行为

以甲基丙烯酸二乙基氨基乙酯为疏水段,聚甲基丙烯酸甘油酯为亲水段,采用可逆加成-断裂转移聚合合成了具有不同嵌段比例的甲基丙烯酸甘油酯-b-甲基丙烯酸二乙氨基乙酯二嵌段聚合物(PGMA-b-PDEAEMAx),其结构经1H NMR和GPC表征。聚合物通过自组装形成球形胶束、线性胶束聚集体和囊泡结构;向聚合物溶液中通入CO2后,其自组装解体。