Application of dispersive liquid-liquid microextraction and high-performance liquid chromatography for the determination of three phthalate esters in water samples

A novel method, dispersive liquid-liquid microextraction (DLLME) coupled with high-performance liquid chromatography-variable wavelength detector (HPLC-VWD), has been developed for the determination of three phthalate esters (dimethyl phthalate (DMP), diethyl phthalate (DEP), and di-n-butyl phthalate (DnBP)) in water samples. A mixture of extraction solvent (41 μL carbon tetrachloride) and dispersive solvent (0.75 mL acetonitrile) were rapidly injected into 5.0 mL aqueous sample for the formation of cloudy solution, the analytes in the sample were extracted into the fine droplets of CCl₄. After extraction, phase separation was performed by centrifugation and the enriched analytes in the sedimented phase were determined by HPLC-VWD. Some important parameters, such as the kind and volume of extraction solvent and dispersive solvent, extraction time and salt effect were investigated and optimized. Under the optimum extraction condition, the method yields a linear calibration curve in the concentration range from 5 to 5000 ng mL⁻¹ for target analytes. The enrichment factors for DMP, DEP and DnBP were 45, 92 and 196, respectively, and the limits of detection were 1.8, 0.88 and 0.64 ng mL⁻¹, respectively. The relative standard deviations (R.S.D.) for the extraction of 10 ng mL⁻¹ of phthalate esters were in the range of 4.3-5.9% (n = 7). Lake water, tap water and bottled mineral water samples were successfully analyzed using the proposed method.     

Determination of phthalate esters in water samples using Nylon6 nanofibers mat-based solid-phase extraction coupled to liquid chromatography

A new method was developed for simultaneous determination of five phthalate esters by a combination of mat-based solid-phase extraction (SPE) with high-performance liquid chromatography. The mat is composed of Nylon6 nanofibers. Dimethyl phthalate (DMP), diethl phthalate (DEP), di-n-butyl phthalate (DBP), di-(2-ethylhexyl) phthalate (DEHP) and dioctyl phthalate (DOP) were successfully separated on a RP-C18 column. Under optimized conditions, the detection limits found for DMP, DEP, DBP, DEHP and DOP were 3, 2, 6, 10 and 33 pg mL^?1, respectively. The method was applied to the analysis of various water samples. Spiked samples gave recoveries in the range from 86.9 to 101.9%, with relative standard deviations below 7.0%. A comparison of Nylon6 nanofibers mat as sorbents, and C18 cartridges and other kinds of SPE sorbents was carried out with respect to recovery, sensitivity, and reproducibility. The results indicated that the Nylon mat is a viable material for the enrichment and determination of phthalate esters in environmental water samples.     

Utilization of homogeneous liquid–liquid extraction followed by HPLC-UV as a sensitive method for the extraction and determination of phthalate esters in environmental water samples

A simple and sensitive method for the extraction of four phthalate esters including dimethyl phthalate (DMP), diethyl phthalate (DEP), benzyl butyl phthalate (BBP) and di-n-butyl phthalate (DBP) as well as their determination in water samples was developed using homogeneous liquid–liquid extraction (HLLE) and HPLC-UV. The extraction method is based on the phase separation phenomenon by the salt addition to the ternary solvent system. The extraction parameters such as type and volume of extracting and consolute solvent, concentration of salt, pH of sample and extraction time were optimized. Under the optimal conditions (extraction solvent: 100?µL CHCl₃; consolute solvent: 2.0?mL methanol; NaCl 15% (w/v) and pH of sample: 6.5) extraction recovery was in the range of 92–102%. Linearity was observed in the range of 0.5–300?µg?L^?1 for DEP and 0.6–300?µg?L^?1 for DMP, BBP and DBP. Correlation coefficients (r ²), limits of detection (LODs) and relative standard deviations (RSDs) were in the ranges of 0.9976–0.9993, 0.18–0.25 and 1.5–4.8%, respectively. The method was successfully applied for the preconcentration and determination of these phthalate esters in the several environmental water samples.     

An Effective High-Performance Liquid Chromatographic–Mass Spectrometric Assay for Catecholamines, as the N(O,S)-Ethoxycarbonyl Ethyl Esters, in Human Urine

The purpose of this study was to develop a simple and accurate analytical method for determination of norepinephrine, epinephrine, and dopamine in urine. The method involves liquid–liquid extraction then liquid chromatography–mass spectrometry (LC–MS). Alkyl chloroformate derivatives were prepared, as the N(O,S)-alkoxycarbonyl alkyl esters of the analytes, in the aqueous samples. The optimum derivatizing reagent for preparation of the N(O,S)-alkoxycarbonyl alkyl esters was chosen by comparing the efficiency of LC of the derivatized analytes after liquid–liquid extraction. The optimum conditions for liquid–liquid extraction from the aqueous matrix were pH 3.0, no salt, and diethyl ether as extraction solvent. Limits of detection (LOD) were 0.5 ng mL^?1 for dopamine and epinephrine and 0.1 ng mL^?1 for norepinephrine. Limits of quantification (LOQ) for urine samples were 1.0 ng mL^?1 for all three compounds. The precision of intra- and inter-day assays was 1.65–581 and 7.17–9.73% (relative standard deviation, RSD), respectively. The range of inaccuracy for intra- and inter-day assays was ?6.47 to 11.9% and ?7.5 to 7.76% (bias) at concentrations of 5 and 50 ng mL^?1, respectively.     

Determination of silver(I) ion in water samples by graphite furnace atomic absorption spectrometry after preconcentration with dispersive liquid-liquid microextraction

A method was developed for the determination of silver ion (Ag) by combining dispersive liquid-liquid microextraction preconcentration with graphite furnace atomic absorption spectrometry. Diethyldithiocarbamate was used as a chelating agent, and carbon tetrachloride and methanol as extraction and dispersive solvent. Factors influencing the extraction efficiency of Ag and its subsequent determination were studied and optimized. The detection limit is 12 ng L^?1 (3 s) with an enrichment factor of 132, and the relative standard deviation is 3.5% (n?=?7, at 1.0 ng mL^?1). The method was successfully applied to the determination of trace amounts of Ag in water samples.     

Air-assisted liquid–liquid microextraction method as a novel microextraction technique; Application in extraction and preconcentration of phthalate esters in aqueous sample followed by gas chromatography–flame ionization detection

A novel microextraction technique, air-assisted liquid–liquid microextraction (AALLME), which is a new version of dispersive liquid–liquid microextraction (DLLME) method has been developed for extraction and preconcentration of phthalate esters, dimethyl phthalate (DMP), diethyl phthalate (DEP), di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DNBP), and di-2-ethylhexyl phthalate (DEHP), from aqueous samples prior to gas chromatography–flame ionization detection (GC–FID) analysis. In this method, much less volume of an organic solvent is used as extraction solvent in the absence of a disperser solvent. Fine organic droplets were formed by sucking and injecting of the mixture of aqueous sample solution and extraction solvent with a syringe for several times in a conical test tube. After extraction, phase separation was performed by centrifugation and the enriched analytes in the sedimented phase were determined by GC–FID. Under the optimum extraction conditions, the method showed low limits of detection and quantification between 0.12–1.15 and 0.85–4 ng mL⁻¹, respectively. Enrichment factors (EFs) and extraction recoveries (ERs) were in the ranges of 889–1022 and 89–102%, respectively. The relative standard deviations (RSDs) for the extraction of 100 ng mL⁻¹ and 500 ng mL⁻¹ of each phthalate ester were less than 4% for intra-day (n = 6) and inter-days (n = 4) precision. Finally some aqueous samples were successfully analyzed using the proposed method and three analytes, DIBP, DNBP and DEHP, were determined in them at ng mL⁻¹ level.     

Determination of Carbamate Pesticides and Phthalates in Vegetables by a Cloud Point Extraction Process Using Tergitol 15-s-7 and High Performance Liquid Chromatography

An efficient and environmentally friendly analytical process based on cloud point extraction (CPE) has been developed for the determination of carbamate pesticides and phthalates in vegetables by high performance liquid chromatography (HPLC) separation and ultraviolet detection (UV). The readily biodegradable nonionic surfactant Tergitol 15-S-7 was chosen as the extraction solvent. To obtain optimum extraction efficiency, several experimental parameters including surfactant concentration, salt concentration, equilibration temperature, equilibration time, and sample pH were identified. Under the optimum conditions, the linear regression coefficients of the standard curves were greater than 0.9984. The limits of detection for carbaryl, pirimicarb, dimethyl phthalate (DMP), and diethyl phthalate (DEP) are 0.003, 0.015, 0.012, and 0.006 µg mL^?1, respectively. The intra-day and inter-day relative standard deviations are less than 5.75% and 6.97%. The proposed method has been proven to be an efficient, green, rapid, and inexpensive approach for extraction and determination of target analytes present in vegetable samples.     

Determination of Alkylphenols in Water by Dispersive Liquid–Liquid Microextraction Based on Solid Formation without a Disperser

Dispersive liquid–liquid microextraction based on solid formation without a disperser combined with high-performance liquid chromatography has been developed for the determination of 4-tert-butylphenol, 4-n-nonylphenol, and 4-tert-octylphenol. This method is rapid, easy, and uses only 10 µL of a low toxicity organic solvent (1-hexadecanethiol) for the extraction solvent and no disperser solvent. The extraction time and centrifugation time require less than 10 min. The linear range was 1–500 ng mL^?1 for 4-tert-butylphenol, 2–1000 ng mL^?1 for 4-tert-octylphenol, and 5–500 ng mL^?1 for 4-n-nonylphenol with r² ≥ 0.9986. The detection limits were between 0.2 and 1.5 ng mL^?1. The recoveries of lake and river water samples were in the range of 79% to 108%, and the relative standard deviations were 5% to 10%.     

Surfactant-assisted dispersive liquid–liquid micro-extraction combined with magnetic solid-phase extraction for analysis of polyphenols in tobacco samples

A novel and simple two-step micro-extraction technique combining surfactant-assisted dispersive liquid–liquid micro-extraction and magnetic solid-phase extraction prior to high-performance liquid chromatography was established for analysis of polyphenols including chlorogenic acid, caffeic acid, and scopoletin in tobacco samples. In the developed system, Fe₃O₄ nanoparticles were synthesized by a one-step chemical co-precipitation method and used to remove hydrophobic substances in tobacco samples by physical adsorption. Low-density solvent (1-heptanol) and cationic surfactant cethyltrimethyl ammonium bromide were employed as extraction solvent and disperser agent, respectively. Under the optimized experimental conditions, a good linearity of the method was obtained over the concentration range from 0.1 to 1000 ng mL^?1 for target analytes. The limits of detection (S/N?=?3) were 0.05 ng mL^?1 for CGA, 0.10 ng mL^?1 for CFA, and 0.12 ng mL^?1 for SP, respectively. Finally, the applicability of the developed method was evaluated by extraction and determination of these three phenolic compounds in tobacco samples and satisfactory average recoveries of spiked samples were between 96.6 and 102.7%.     

Magnetic Nanoparticle-Based Micro-Solid Phase Extraction and GC�CMS Determination of Oxadiargyl in Aqueous Samples

A new facile, rapid, inexpensive, and sensitive method based on magnetic micro-solid phase extraction (M-??-SPE) coupled to gas chromatography?Cmass spectrometry (GC?CMS) was developed for determination of the herbicide oxadiargyl in environmental water samples. The feasibility of employing non-modified magnetic nanoparticles (MNPs) as sorbent was examined and applied to perform the extraction process. Influential parameters affecting the extraction efficiency along with desorption conditions were investigated and optimized. The limit of detection (LOD, S/N = 3) and limit of quantification (LOQ, S/N = 10) of the method under optimized conditions were 0.005 and 0.030 ng mL^?1, respectively. The relative standard deviations (RSD) (n = 3) at a concentration of 0.10 ng mL^?1 was 11%. The calibration curve of oxadiargyl showed linearity in the range of 0.050?C0.50 ng mL^?1. The developed method was successfully applied to the extraction of oxadiargyl from spiked tap water and Zayande-Rood River water samples and the relative recoveries of 98 and 94% were obtained, respectively.     

Comparison of efficiencies between single-drop microextraction and continuous-flow microextraction for the determination of methomyl in natural waters

Two liquid-phase microextraction (LPME) approaches, static direct-immersed single-drop microextraction (DI-SDME) and continuous-flow microextraction (CFME), were used to extract methomyl in water samples and their respective extraction efficiencies were compared. Several important parameters affecting extraction efficiency such as the type of extraction solvent, solvent drop volume, stirring speed or flow rate, extraction time and salt concentration were optimised. The optimised conditions were as follows: 3.0-µL tetrachloroethane (C₂H₂Cl₄) as the extraction solvent, 15% NaCl (w/v), 15 min extraction time and stirring speed at 600 rpm for DI-SDME; 3.5-µL C₂H₂Cl₄ as the extraction solvent, 15% NaCl (w/v), 21 min extraction time and flowing rate at 0.8 mL min^?1 for CFME. Under the previous optimal conditions, the linear range, detection limit (S/N = 3) and precision (RSD, n = 6) were 5.0-5000 ng mL^?1, 1.5 ng mL^?1, 6.9% for DI-SDME, and 4.0–10000 ng mL^?1, 2.5 ng mL^?1, 4.6% for CFME, respectively. Lake and river water samples were successfully analysed by DI-SDME and CFME. The result demonstrated that both SDME and CFME techniques are simple, low cost and amity to environment. As a result, the two approaches have tremendous potential in trace analysis of methomyl in natural waters.     

Three-Phase Solvent Bar Microextraction Combined with HPLC for Extraction and Determination of Plasma Protein Binding of Bisoprolol

A three-phase solvent bar microextraction (TPSBME) technique combined with high performance liquid chromatography (HPLC)?Cfluorescence detection was evaluated for the quantitative determination of plasma protein binding of bisoprolol. Bisoprolol was extracted from a 5.6-mL basified plasma sample (donor phase) into the organic solvent (n-octanol) impregnated in the pores of a hollow fiber and then extracted into an acidic solution (acceptor phase) inside the lumen of the hollow fiber. Metoprolol was used as the internal standard. Several parameters influencing the efficiency of the method were investigated and optimized including organic solvent (n-butanol, n-octanol, dibutyl phthalate, dihexyl ether), stirring rate (100?C1,000 rpm), extraction time (5?C35 min), extraction temperature (15?C45 °C), concentration of the donor phase (0.1?C2 M NaOH) and the acceptor phase (0.5?C5 M formic acid), salt concentration (2.5?C10%, w/v). Under the optimal condition, extraction recoveries from plasma samples were above 61.4% for bisoprolol. The calibration curves were obtained in the range of 10?C100 ng mL^?1 with reasonable linearity (r > 0.994). The method was successfully applied to determine the plasma protein binding rate of bisoprolol.     

A novel chemiluminescence reaction system for the determination of lincomycin with diperiodatonickelate(IV)

A sensitive and high selective chemiluminescence (CL) method was developed for the determination of lincomycin in acid medium using diperiodatonickelate as a reagent. The mechanism leading to luminescence is discussed by comparing the spectra of fluorescence and CL. Relative CL intensity is linear in the range from 8.0 ng mL^?1 to 1.0 µg mL^?1, the limit of detection is 2.5 ng mL^?1 (3σ), and the relative standard deviation is 4.0% at 0.1 µg mL^?1 of lincomycin (n?=?7). The method was successfully applied to the determination of lincomycin in injections, human urine, and in serum samples.     

Simultaneous derivatization and extraction of iodine from milk samples by hollow fiber liquid-phase microextraction followed by gas chromatography-electron capture detection

A simple, low-cost and sensitive method is demonstrated for derivatization and extraction of iodine from milk samples using hollow fiber liquid-phase microextraction (HF-LPME) and gas chromatography-electron capture detection. Iodide ions are converted to iodine under acidic medium and in the presence of an oxidant. The generated iodine reacted with 3-pentanone in extraction vial to give 2-iodo-3-pentanone and was extracted into 4 μL of 1-octanol located in the lumen of a hollow fiber. Organic solvent was selected using one variable at a time optimization method and the other main factors affecting derivatization and HF-LPME procedures were evaluated using a Taguchi’s L₁₆ (4⁵) orthogonal array. Under optimal conditions, the method showed low limit of detection (0.5 ng mL^?1), wide linear range (1–2,000 ng mL^?1) with good correlation coefficient (0.9997) and acceptable relative standard deviation (4.6 %, n = 5). Finally, the developed method was successfully applied for determination of iodide in real samples including infant milk formulas and cow milk with reasonable relative recoveries (99.8–110.5 %).     

Simultaneous preconcentration and determination of malachite green and fuchsine dyes in seafood and environmental water samples using nano-alumina-based molecular imprinted polymer solid-phase extraction

Molecular imprinted polymer for determination of malachite green (MG) and fuchsine basic (FU) dyes by spectrophotometry has been used, to develop a novel simultaneous extraction and preconcentration method. Molecularly imprinted layer-coated nano-alumina (MIP@Nano-Al₂O₃) as adsorbent was prepared by surface molecular imprinting technique, and characterised by FTIR spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis (EDAX) and thermogravimetric analysis (TGA). The method is based on simultaneous extraction of MG and FU dyes from aqueous solution by using molecularly imprinted polymer and measuring the absorbance at 617 and 546 nm for MG and FU, respectively. Parameters which affect the extraction efficiency such as pH, volume of eluent and amount of adsorbent were investigated and optimised. Linear calibration curves were obtained in the range of 2–750 ng mL^?1 for MG and 1–240 ng mL^?1 for FU under optimum conditions. Detection limit based on three times the standard deviation of the blank (3S_b) was 0.655 and 0.245 ng mL^?1 (n = 10) for MG and FU, respectively. The relative standard deviation (RSD) for 100 ng mL^?1 of MG and FU was 2.35 and 3.06% (n = 7), respectively. The method was applied to the simultaneous determination of the dyes in different seafood and environmental water samples.     

Determination of Estrone and 17β-Estradiol in Water Samples Using Dispersive Liquid–Liquid Microextraction Followed by LC

A new method, termed dispersive liquid–liquid microextraction (DLLME), was developed for the extraction and pre-concentration of estrone (E1) and 17β-estradiol (E2) in water samples. The samples were extracted by 0.50 mL methanol (disperser solvent) containing 25.0 μL tetrachloroethane (extraction solvent). Important factors such as the volume and type of extraction and disperser solvent, extraction time and salt effect were studied. Under optimum conditions, the enrichment factors and the limits of detection were 347 and 0.2 ng mL^?1 for E1, and 203 and 0.1 ng mL^?1 for E2, respectively. The linear range was 0.5–5,000 ng mL^?1. Compared to other methods, DLLME–LC–VWD has advantages for E1 and E2 analysis in water: high enrichment factor, low cost, simplicity, quick and easy operation.     

Use of Continuous-Flow Microextraction and Liquid Chromatography for Determination of Phoxim in Water Samples

A novel liquid-phase microextraction method, continuous-flow microextraction (CFME), combined with high-performance liquid chromatography and variable-wavelength detection, has been used for determination of phoxim in water samples. Extraction is conducted in a home-made glass chamber. A 3-μL drop of n-hexane is injected into the chamber by means of a microsyringe and held at the outlet tip of a PTFE connecting tube. The sample solution flows through the extraction glass chamber, past the tube, and the solvent drop interacts continuously with the sample solution and extraction proceeds simultaneously. The effects of different extraction solvents, solvent drop volume, sample flow rate, extraction time, and addition of salt on extraction efficiency were studied. Under the optimum extraction conditions a linear calibration plot, correlation coefficient (R²) 0.9988, was obtained for phoxim in the concentration range 0.01 to 10 μg mL^?1. The limit of detection (LOD) was 5 ng mL^?1 and the relative standard deviation (RSD) at the 100 ng mL^?1 level was 4.1%. Lake water and tap water samples were successfully analyzed by use of the proposed method.     

Silica Microspheres for SPE and Determination of Fungicides in Water by LC

A new method has been developed for the determination of metalaxyl, myclobutanil, and tebuconazole in environmental water samples with preconcentration by cartridges packed with SiO₂ microspheres prior to LC. Several parameters such as the volume and composition of eluent, sample flow rate, sample pH, and sample volume were optimized. Under the optimal conditions, excellent detection limits (S/N = 3) and precision (RSD, n = 6) were 0.02 ng mL^?1, 1.3% for metalaxyl, 0.02 ng mL^?1, and 2.4% for myclobutanil and 0.08 ng mL^?1 and 4.3% for tebuconazole, respectively. The method was applied to the analysis of real-water samples, and satisfactory results were obtained. The average spiked recoveries were in the range of 86.3–97.5%. These results indicate that SiO₂ microspheres have great potential to be used as a novel solid phase extraction adsorbent that could have wide applications in the environmental field.     

Novel Microporous Membrane/Solvent Microextraction for Preconcentration of Cinnamic Acid Derivatives in Rhizoma Typhonii

A novel microporous membrane/solvent microextraction (MPMSME) approach was developed in which a piece of microporous filter membrane was used as not only extraction solvent holder but also solid phase extraction unit. Subsequently, high-performance liquid chromatography with an UV detector was conducted. The wide exchange surface and very little organic solvent consumption made this sample pretreatment technology very interesting. The cinnamic acid derivatives were used as model analytes to evaluate the procedure. Parameters that affect the MPMSME such as type of extraction solvent, membrane area (or volumes of extraction solvent), aqueous phase pH, ionic strength, extraction stirring rate, extraction time, and sample volume were investigated and optimized. The enrichment factor (EF) of analyte was defined in MPMSME. Under the optimized conditions, the EFs of cinnamic acid derivatives were 43–144. Good linearities were obtained from 4 to 4,000 ng mL^?1 for all the analytes with regression coefficients of between 0.9956 and 0.9977; the limits of quantification were below 0.4 ng mL^?1, and satisfactory recoveries (93–106 %) and precisions (0.37–13 %) were also achieved. The experimental results showed that the method was simple, rapid, practical, and effective for preconcentration and determination of the cinnamic acid derivatives in rhizoma typhonii.     

Optimization of temperature-controlled ionic liquid homogenous liquid phase microextraction followed by high performance liquid chromatography for analysis of diclofenac and mefenamic acid in urine sample

In this work, a temperature-controlled ionic liquid homogeneous liquid phase microextraction (TCIL-HLPME) technique followed by HPLC–UV was applied for preconcentration and determination of diclofenac (DIC) and mefenamic acid (MEF) in urine samples. 1-butyl-3-methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) was used as the optimum extraction solvent. Experimental design and response surface methodology was used for the optimization process. Firstly, a screening step, using Plackett-Burman design, was carried out to find the significant factors on the extraction efficiency and subsequently, a central composite design (CCD) was employed to find the optimum values of these parameters. The optimal conditions were obtained as extraction solvent volume of 105 µL; sample pH of 2.0, extraction time of 6 min, centrifugation time of 5 min; heating time of 2 min; heating temperature of 50 °C and 20 % of NaCl. Under optimized conditions, the preconcentration factors of 82 and 60 were obtained for DIC and MEF, respectively. The detections limits of 20 and 30 ng mL^?1 were achieved for DIC and MEF by the proposed method, respectively. The calibration curves were linear in the range of 40–1000 and 60–1000 ng mL^?1 for DIC and MEF, respectively. The intra- and inter-assay precisions (RSD %, n = 3) were in the range of 3.5–4.4 % and 7.3–8.0 % at the concentration level of 100 ng mL^?1, respectively. The validated method was successfully applied for the analysis of target analytes in some urine samples.