Infrared spectra of CH3-CrH, CH3-WH, CH2=WH2, and CH[triple bond]WH3 formed by activation of CH4 with Cr and W atoms

Laser-ablated W atoms react with CH4 in excess argon to form the CH3-WH, CH2=WH2, and CH[triple bond]WH3 molecules with increasing yield in this order of product stability. These molecules are identified from matrix infrared spectra by isotopic substitution. Tungsten methylidene and methylidyne hydride molecules are reversibly interconverted by alpha-H transfers upon visible and ultraviolet irradiations. Matrix infrared spectra and DFT/B3LYP calculations show that CH[triple bond]WH3 is a stable molecule with C3v symmetry, but other levels of theory were required to describe agostic distortion for CH2=WH2. Analogous reactions with Cr gave only CH3-CrH, which is calculated to be by far the most stable product.     

CH3--MoF], [CH2=MoHF], and [CH[triple bond]MoH2F] formed by reaction of laser-ablated molybdenum atoms with methyl fluoride: persistent photoreversible interconversion through alpha-hydrogen migration and agostic interaction

Simple molybdenum methyl, carbene, and carbyne complexes, [CH3--MoF], [CH2=MoHF], and [CH[triple chemical bond]MoH(2)F], were formed by the reaction of laser-ablated molybdenum atoms with methyl fluoride and isolated in an argon matrix. These molecules provide a persistent photoreversible system through alpha-hydrogen migration between the carbon and metal atoms: The methyl and carbene complexes are produced by applying UV irradiation (240-380 nm) while the carbyne complex is depleted, and the process reverses on irradiation with visible light (lambda>420 nm). An absorption at 589.3 cm(-1) is attributed to the Mo--F stretching mode of [CH3--MoF], which is in fact the most stable of the plausible products. Density functional theory calculations show that one of the alpha-hydrogen atoms of the carbene complex is considerably bent toward the metal atom (angle-spherical HCMo=84.5 degrees ), which provides evidence of a strong agostic interaction in the triplet ground state. The calculated C[triple chemical bond]Mo bond length in the carbyne is in the range of triple-bond values in methylidyne complexes.     

Infrared spectra of the CH3-MX, CH2=MHX, and CH[triple bond]MH2X- complexes formed by reaction of methyl halides with laser-ablated group 5 metal atoms

Reactions of group 5 metal atoms and methyl halides give carbon-metal single, double, and triple bonded complexes that are identified from matrix IR spectra and vibrational frequencies computed by DFT. Two different pairs of complexes are prepared in reactions of methyl fluoride with laser-ablated vanadium and tantalum atoms. The two vanadium complexes (CH(3)-VF and CH(2)=VHF) are persistently photoreversible and show a kinetic isotope effect on the yield of CD(2)=VDF. Identification of CH(2)=TaHF and CH[triple bond]TaH(2)F(-), along with the similar anionic Nb complex, suggests that the anionic methylidyne complex is a general property of the heavy group 5 metals. Reactions of Nb and Ta with CH(3)Cl and CH(3)Br have also been carried out to understand the ligand effects on the calculated structures and the vibrational characteristics. The methylidene complexes become more distorted with increasing halogen size, while the calculated C=M bond lengths and stretching frequencies decrease and increase, respectively. The anionic methylidyne complexes are less favored with increasing halogen size. Infrared spectra show a dramatic increase of the Ta methylidenes upon annealing, suggesting that the formation of CH(3)-TaX and its conversion to CH(2)=TaHX require essentially no activation energy.     

Infrared spectra and density functional calculations of CH2 = MHX and CH[triple bond]MH2X complexes prepared in reactions of methyl halides with Mo and W atoms

The simple methylidene and methylidyne complexes (CH2=MHX and CH[triple bond]MH2X; X = F, Cl, Br, and I) are prepared in reactions of laser-ablated Mo and W atoms with the methyl halides and investigated by matrix infrared spectroscopy and density functional theory calculations. These complex structures are photoreversible: visible irradiation converts the methylidene complex to the methylidyne complex, and UV irradiation reverses this effect via alpha-hydrogen migration. While the higher oxidation state complexes are readily formed regardless of halogen size, the Mo methylidyne complex is relatively less favored with increasing halogen size, and the W complex shows the opposite tendency. The group 6 metal methylidenes are predicted to have the most agostically distorted structures among the early transition-metal methylidenes. The computed carbon-metal bond shortens with increasing halogen size for both the methylidene and methylidyne complexes. Harmonic and anharmonic frequencies computed by DFT converge on the experimental values and thus provide support for the identification of these new Mo and W complexes.     

Methane activation by laser-ablated V, Nb, and Ta atoms: Formation of CH3-MH, CH2=MH2, CHMH3-, and (CH3)2MH2

Methane activation by group 5 transition-metal atoms in excess argon and the matrix infrared spectra of reaction products have been investigated. Vanadium forms only the monohydrido methyl complex (CH3-VH) in reaction with CH4 and upon irradiation. On the other hand, the heavier metals form methyl hydride and methylidene dihydride complexes (CH3-MH and CH2=MH2) along with the methylidyne trihydride anion complexes (CHMH3-). The neutral products, particularly the methylidene complex, increase markedly on irradiation whereas the anionic product depletes upon UV irradiation or addition of a trace of CCl4 or CBr4 to trap electrons. Other absorptions that emerge on irradiation and annealing increase markedly at higher precursor concentration and are attributed to a higher-order product ((CH3)2MH2)). Spectroscopic evidence suggests that the agostic Nb and Ta methylidene dihydride complexes have two identical metal-hydrogen bonds.     

Lithiated hydrocarbons, their conjugate bases, and corresponding radicals: a computational study of RLi (R = CH3, CH3CH2, CH2=CH, and HC triple bond C)

Organolithium compounds RLi (R = CH(3), CH(3)CH(2), CH(2)=CH, and HC(triple bond)C) and their corresponding hydrocarbons were fully optimized at the MP2/6-311+G(2df,2pd) level. Single-point energy calculations also were carried out at the CCSD(T) and B3LYP levels with the same triple split-valence basis set. Acidities, electron affinities, and bond dissociation energies are reported, and the following general results were found: (1) Alpha-lithio anions are ground-state triplet molecules. (2) Lithium is an acid-enhancing substituent. (3) Conjugate bases of organolithiums are stable with respect to electron loss and therefore are attractive targets for mass spectrometry investigations. (4) Lithium weakens alpha- and beta-C-H bonds, the latter by approximately 25 kcal mol(-1). Consequently, radical chemistry of lithiated compounds at remote sites is a promising area for exploration.     

Reactions of an amphoteric terminal tungsten methylidyne complex.

Treatment of [Tp'(CO)(2)W triple bond C--PPh(3)][PF(6)] (Tp' = hydridotris(3,5-dimethylpyrazolylborate)) with Na[HBEt(3)] in THF forms the methylidyne complex Tp'(CO)(2)W triple bond C--H via formyl and carbene intermediates Tp'(CO)(C(O)H)W triple bond C- PPh(3) and Tp'(CO)(2)W=C(PPh(3))(H), respectively. Spectroscopic features reported for Tp'(CO)(2)W triple bond C--H include the W triple bond C stretch (observed by both IR and Raman spectroscopy) and the (183)W NMR signal (detected by a (1)H, (183)W 2D HMQC experiment). Protonation of the Tp'(CO)(2)W triple bond C--H methylidyne complex with HBF(4).Et(2)O yields the cationic alpha-agostic methylidene complex [Tp'(CO)(2)W=CH(2)][BF(4)]. The methylidyne complex Tp'(CO)(2)W triple bond C-H can be deprotonated with alkyllithium reagents to provide the anionic terminal carbide Tp'(CO)(2)W triple bond C--Li; a downfield resonance at 556 ppm in the (13)C NMR spectrum has been assigned to the carbide carbon. The terminal carbide Tp'(CO)(2)W triple bond C-Li adds electrophiles at the carbide carbon to generate Tp'(CO)(2)W triple bond C--R (R = CH(3), SiMe(3), I, C(OH)Ph(2), CH(OH)Ph, and C(O)Ph) Fischer carbynes. A pK(a) of 28.7 was determined for Tp'(CO)(2)W triple bond C--H in THF by titrating the terminal carbide Tp'(CO)(2)W triple bond C--Li with 2-benzylpyridine and monitoring its conversion to Tp'(CO)(2)W triple bond C--H with in situ IR spectroscopy. Addition of excess Na[HBEt(3)] to neutral Tp'(CO)(2)W triple bond C--H generates the anionic methylidene complex [Na][Tp'(CO)(2)W=CH(2)]. The synthetic methodology for generating an anionic methylidene complex by hydride addition to neutral Tp'(CO)(2)W triple bond C--H contrasts with routes that utilize alpha-hydrogen abstraction or hydride removal from neutral methyl precursors to generate methylidene complexes. Addition of PhSSPh to the anionic methylidene complex in solution generates the saturated tungsten product Tp'(CO)(2)W(eta(2)-CH(2)SPh) by net addition of the SPh(+) moiety.     

Direct detection of polyynes formation from the reaction of ethynyl radical (C2H) with propyne (CH3-C[triple bond]CH) and allene (CH2=C=CH2)

The reactions of the ethynyl radical (C(2)H) with propyne and allene are studied at room temperature using an apparatus that combines the tunability of the vacuum ultraviolet radiation of the Advanced Light Source at Lawrence Berkeley National Laboratory with time-resolved mass spectrometry. The C(2)H radical is prepared by 193-nm photolysis of CF(3)CCH and the mass spectrum of the reacting mixture is monitored in time using synchrotron-photoionization with a dual-sector mass spectrometer. Analysis using photoionization efficiency curves allows the isomer-specific detection of individual polyynes of chemical formula C(5)H(4) produced by both reactions. The product branching ratios are estimated for each isomer. The reaction of propyne with ethynyl gives 50-70% diacetylene (H-C[triple bond]C-C[triple bond]C-H) and 50-30% C(5)H(4), with a C(5)H(4)-isomer distribution of 15-20% ethynylallene (CH(2)=C=CH-C[triple bond]CH) and 85-80% methyldiacetylene (CH(3)-C[triple bond]C-C[triple bond]CH). The reaction of allene with ethynyl gives 35-45% ethynylallene, 20-25% methyldiacetylene and 45-30% 1,4-pentadiyne (HC[triple bond]C-CH(2)-C[triple bond]CH). Diacetylene is most likely not produced by this reaction; an upper limit of 30% on the branching fraction to diacetylene can be derived from the present experiment. The mechanisms of polyynes formation by these reactions as well as the implications for Titan's atmospheric chemistry are discussed.     

Infrared spectra of the CH3-MX and CH2-MHX complexes formed by reactions of laser-ablated group 3 metal atoms with methyl halides

Reactions of laser-ablated group 3 metal atoms with methyl halides have been carried out in excess of Ar during condensation and the matrix infrared spectra studied. The metals are as effective as other early transition metals in providing insertion products (CH3-MX) and higher oxidation state methylidene complexes (CH2-MHX) (X = F, Cl, Br) following alpha-hydrogen migration. Unlike the cases of the group 4-6 metals, the calculated methylidene complex structures show little evidence for agostic distortion, consistent with the previously studied group 3 metal methylidene hydrides, and the C-M bond lengths of the insertion and methylidene complexes are comparable to each other. However, the C-Sc bond lengths are 0.013, 0.025, and 0.029 A shorter for the CH2-ScHX complexes, respectively, and the spin densities are consistent with weak C(2p)-Sc(3d) pi bonding. The present results reconfirm that the number of valence electrons on the metal is important for agostic interaction in simple methylidene complexes.     

Reactions of methane with titanium atoms: CH3TiH, CH2=TiH2, agostic bonding, and (CH3)2TiH2

Laser-ablated titanium atoms react with methane to form the insertion product CH3TiH, which undergoes a reversible photochemical alpha-H transfer to give the methylidene complex CH2=TiH2. On annealing a second methane activation occurs to produce (CH3)2TiH2. These molecules are identified from matrix infrared spectra by isotopic substitution (CH4, 13CH4, CD4, CH2D2) and comparison to DFT frequency calculations. The computed planar structure for singlet ground-state CH2=TiH2 shows CH2 distortion and evidence for agostic bonding (H-C-Ti, 91.4 degrees), which is supported by the spectra for CHD=TiHD.     

The C-H activation of methane by laser-ablated zirconium atoms: CH2=ZrH2, the simplest carbene hydride complex, agostic bonding, and (CH3)2ZrH2

Reaction of laser-ablated Zr with CH(4) ((13)CH(4), CD(4), and CH(2)D(2)) in excess neon during condensation at 5 K forms CH(2)=ZrH(2), the simplest alkylidene hydride complex, which is identified by infrared absorptions at 1581.0, 1546.2, 757.0, and 634.5 cm(-)(1). Density functional theory electronic structure calculations using a large basis set with polarization functions predict a C(1) symmetry structure with agostic C-H- - -Zr bonding and distance of 2.300 A. Identification of the agostic CH(2)=ZrH(2) methylidene complex is confirmed by an excellent match of calculated and observed isotopic frequencies particularly for the four unique CHD=ZrHD isotopic modifications. The analogous reactions in excess argon give two persistent photoreversible matrix configurations for CH(2)=ZrH(2). Finally, methane activation by CH(2)=ZrH(2) gives the new (CH(3))(2)ZrH(2) molecule.     

Ln4(CH2)4 cubane-type rare-earth methylidene complexes consisting of "(C5Me4SiMe3)LnCH2" units (Ln = Tm, Lu)

Tetranuclear cubane-type rare-earth methylidene complexes consisting of four "Cp'LnCH(2)" units, [Cp'Ln(μ(3)-CH(2))](4) (4-Ln; Ln = Tm, Lu; Cp' = C(5)Me(4)SiMe(3)), have been obtained for the first time through CH(4) elimination from the well-defined polymethyl complexes [Cp'Ln(μ(2)-CH(3))(2)](3) (2-Ln) or mixed methyl/methylidene precursors such as [Cp'(3)Ln(3)(μ(2)-Me)(3)(μ(3)-Me)(μ(3)-CH(2))] (3-Ln). The reaction of the methylidene complex 4-Lu with benzophenone leads to C═O bond cleavage and C═C bond formation to give the cubane-type oxo complex [Cp'Lu(μ(3)-O)](4) and CH(2)═CPh(2), while the methyl/methylidene complex 3-Tm undergoes sequential methylidene addition to the C═O group and ortho C-H activation of the two phenyl groups of benzophenone to afford the bis(benzo-1,2-diyl)ethoxy-chelated trinuclear complex [Cp'(3)Tm(3)(μ(2)-Me)(3){(C(6)H(4))(2)C(O)Me}] (6-Tm).     

Silylidyne, HSi[triple bond]MoH3 and HSi[triple bond]WH3, and silyl metal hydride, SiH3-CrH, products in silane reactions

Laser-ablated group 6 metal atoms react with silane to form inserted SiH 3-MH hydride intermediates, which are identified from M-H and Si-H stretching modes. Following two successive alpha-H-transfers, the HSiMH 3 (M = Mo, W) silylidyne molecules are produced. These silicon-metal triple-bonded species are identified as major products from the strong M-H stretching modes through deuterium substitution and comparison with frequencies and intensities from density functional calculations and from the analogous methylidynes. The silylidynes have calculated C 3 v structures and longer Si-H bonds than silane, but the C 3 v methylidyne analogues have shorter C-H bonds than methane. The SiMo and SiW bonds are polarized differently and have slightly lower effective bond orders than their carbon analogues. In addition, calculations for the group 6 silylidene molecules reveal C s structures with no evidence of agostic distortion, in contrast to the corresponding methylidene molecules.     

Formation of CH3TiX, CH2=TiHX, and (CH3)2TiX2 by reaction of methyl chloride and bromide with laser-ablated titanium atoms: photoreversible alpha-hydrogen migration

The simple methylidene (CH2=TiHX) and Grignard-type (CH3TiX) complexes are produced by reaction of methyl chloride and bromide with laser-ablated Ti atoms and isolated in a solid Ar matrix, and they form a persistent photoreversible system via alpha-hydrogen migration between the carbon and titanium atoms. The Grignard-type product is transformed to the methylidene complex upon UV (240 nm < lambda < 380 nm) irradiation and vice versa with visible (lambda > 530 nm) irradiation. More stable dimethyl dihalide complexes [(CH3)2TiX2] are also identified, whose relative concentration increases upon annealing and at high methyl halide concentration. The reaction products are identified with three different groups of absorptions on the basis of the behaviors upon broadband photolysis and annealing, and the vibrational characteristics are in a good agreement with DFT computation results.     

Synthesis and reactivity of the hydrido- and alkylrhenium methylidene complexes Cp*(PMe3)2(R)Re=CH2 (R = H, CH3)

Protonolysis of the dimethylrhenium(III) compound Cp(PMe(3))(2)Re(CH(3))(2) (3) led to formation of the highly reactive hydridorhenium methylidene compound [Cp(PMe(3))(2)Re(CH(2))(H)][OTf] (4), which was characterized spectroscopically at low temperature. Although 4 decomposed above -30 degrees C, reactivity studies performed at low temperature indicated it was in equilibrium with the coordinatively unsaturated methylrhenium complex [Cp(PMe(3))(2)Re(CH(3))][OTf] (2). Methylidene complex 4 was found to react with PMe(3) to afford [Cp(PMe(3))(3)Re(CH(3))][OTf] (6) and with chloride anion to give Cp(PMe(3))(2)Re(Me)Cl (7). When BAr(f) anion was added to 4, the thermally stable methylrhenium methylidene complex [Cp(PMe(3))(2)Re(CH(2))(CH(3))][BAr(f)] (8) was isolated upon warming to room temperature. The mechanisms of formation of both 4 and 8 are discussed in detail, including DFT calculations. The novel carbonyl ligated complex Cp(CO)(2)Re(CH(3))OTf (12) was prepared, isolated, and found to not undergo migration reactions to form methylidene complexes.     

A microwave spectroscopic and quantum chemical study of 3-butyne-1-selenol (HSeCH2CH2C[triple bond]CH)

The microwave spectrum of 3-butyne-1-selenol has been studied by means of Stark-modulation microwave spectroscopy and quantum chemical calculations employing the B3LYP/aug-cc-pVTZ and MP2/6-311++G(3df,3pd) methods. Rotational transitions attributable to the H80SeCH2CH2C[triple bond]CH and H78SeCH2CH2C[triple bond]CH isotopologues of two conformers of this molecule were assigned. One of these conformers possesses an antiperiplanar arrangement for the atoms Se-C-C-C, while the other is synclinal and seems to be stabilized by the formation of a weak intramolecular hydrogen bond between the hydrogen atom of the selenol group and the pi electrons of the CC triple bond. The energy difference between these conformers was determined to be 0.2(5) kJ/mol by relative intensity measurements, and the hydrogen-bonded form was slightly lower in energy.     

Infrared spectra, structure, and bonding of the GeH3-CrH, HGe[triple bond]MoH3, and HGe[triple bond]WH3 molecules in solid neon and argon

Laser ablated chromium, molybdenum, and tungsten atoms react with germane during condensation in excess noble gases. The chromium reaction stopped at the germyl metal hydride, molybdenum gave some hydride but mostly germylidyne, and tungsten reacted spontaneously to give only the germylidyne species. These molecules were identified by isotopic shifts, density-functional theory product energy and frequency calculations, and comparison to the analogous methane and silane reaction products. Effective bond orders for the HGe[triple bond]MoH3 and HGe[triple bond]WH3 molecules are 2.82 and 2.87 using the B3LYP density functional, and are slightly lower than their silicon and carbon analogues. Our calculated Ge[triple bond]M triple bond lengths for these simple trihydride complexes are 0.05 to 0.10 A shorter than those measured for larger group 6 organometallic complexes.     

Formation and characterization of the uranium methylidene complexes CH2 = UHX (X = F, Cl, and Br)

The reactions between uranium atoms and CH3X (X = F, Cl, and Br) molecules are investigated in a solid argon matrix. The major products formed on ultraviolet irradiation are the CH2=UHX methylidene complexes. DFT calculations predict these triplet ground-state structures to be stable and to have significant agostic interactions. Parallels between the uranium and analogous thorium methylidene complexes are discussed.     

Group 4 transition metal CH2=MF2, CHF=MF2, and HC/MF3 complexes formed by C-F activation and alpha-fluorine transfer

Group 4 transition metal methylidene difluoride complexes (CH2=MF2) are formed by the reaction of methylene fluoride with laser-ablated metal atoms and are isolated in an argon matrix. Isotopic substitution of the CH2F2 precursor and theoretical computations (B3LYP and CCSD) confirm product identifications and assignments. Our calculations indicate that the CH2=MF2 complexes have near C2v symmetry and are considerably more stable than other possible products (CH2(mu-F)MF and CHF=MHF). The primary reaction exothermicity provides more than enough energy to activate the initial bridge-bonded CH2(mu-F)MF products on the triplet potential energy surface to complete an alpha-F transfer to form the very stable CH2=MF2 products. Analogous experiments with CHF3 produce CHF=TiF2, which is not distorted at the C-H bond, whereas the heavier group 4 metals form lower-energy triplet HC/MF3 complexes, which contain weak degenerate C(p)-M(d) pi-bonding interactions. Comparisons are made with the CH2=MHF methylidene species, which showed considerable agostic distortions.     

P(CH(3)NCH(2)CH(2))(3)N as a dehydrobromination reagent: synthesis of vitamin A derivatives revisited.

Although P(CH(3)NCH(2)CH(2))(3)N (1) was found to be less effective than 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) or 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in the removal of hydrogen bromide from vitamin A intermediates 13-cis-10-bromo-9,10-dihydroretinyl acetates (6) and 14-bromo-9,14-dihydroretinyl acetate (11) when the reaction was carried out in refluxing benzene, in acetonitrile at room temperature it was superior to DBN and DBU. A (31)P NMR study of this reaction suggests that the carbanion generated from acetonitrile-d(3) in the presence of 1 is the basic species that initiates the elimination step. Diastereoselectivity of the nucleophilic addition of (Z)-HC triple bond C(CH(3))=CHCH(2)OH to the carbonyl group of (E)-2-methyl-4-(2',6',6'-trimethyl-1'-cyclohexen-1'-yl)-3-butenal (2) was only moderate (20%), and (9R,10S)-13-cis-11,12-didehydro-9,10-dihydro-10-hydroxyretinol (3b) predominated. The LiAlH(4) reduction of the C triple bond C bond in the diastereoisomeric diols 3 afforded 13-cis-9,10-dihydro-10-hydroxyretinols 4a and 4b as major products together with 11-cis-13-cis-isomers and the deoxygenated compound (3EZ,5EZ,8E)-3,7-dimethyl-9-(2,6,6-trimethyl-1-cyclohexen-1-yl)-1,3,5,8-nonatetraene (9). Reaction of 15-acetates of the pure diastereoisomeric allylic alcohols 4a and 4b with PBr(3) occurred with significant but not identical retention of configuration, and with concomitant formation of the rearranged bromide 11.