Self‐Assembly of a Highly Organized,Hexameric Supramolecular Architecture: Formation,Structure and Properties

Two derivatives, ³ L and ⁹ L , of a ditopic, multiply hydrogen‐bonding molecule, known for more than a decade, have been found, in the solid state as well as in solvents of low polarity at room temperature, to exist not as monomers, but to undergo a remarkable self‐assembly into a complex supramolecular species. The solid‐state molecular structure of ³ L , determined by single‐crystal X‐ray crystallography, revealed that it forms a highly organized hexameric entity ³ L ₆ with a capsular shape, resulting from the interlocking of two sets of three monomolecular components, linked through hydrogen‐bonding interactions. The complicated ¹H NMR spectra observed in o‐dichlorobenzene (o‐DCB) for ³ L and ⁹ L are consistent with the presence of a hexamer of D₃ symmetry in both cases. DOSY measurements confirm the hexameric constitution in solution. In contrast, in a hydrogen‐bond‐disrupting solvent, such as DMSO, the ¹H NMR spectra are very simple and consistent with the presence of isolated monomers only. Extensive temperature‐dependent ¹H NMR studies in o‐DCB showed that the L ₆ species dissociated progressively into the monomeric unit on increasing th temperature, up to complete dissociation at about 90 °C. The coexistence of the hexamer and the monomer indicated that exchange was slow on the NMR timescale. Remarkably, no species other than hexamer and monomer were detected in the equilibrating mixtures. The relative amounts of each entity showed a reversible sigmoidal variation with temperature, indicating that the assembly proceeded with positive cooperativity. A full thermodynamic analysis has been applied to the data.     

A Five‐layer π‐Aromatic Structure Formed through Self‐assembly of a Porphyrin Trimer and Two Aromatic Guests

In this study we synthesized two‐ and four‐armed porphyrins – bearing two carboxyl and four 2‐aminoquinolino functionalities, respectively, at their meso positions – as a complementary hydrogen bonding pair for the self‐assembly of a D₂‐symmetric porphyrin trimer host. Two units of the two‐armed porphyrin and one unit of the four‐armed porphyrin self‐assembled quantitatively into the D₂‐symmetric porphyrin trimer, stabilized through ammidinium‐carboxylate salt bridge formation, in CH₂Cl₂ and CHCl₃. The porphyrin trimer host gradually bound two units of 1,3,5‐trinitrobenzene between the pair of porphyrin units, forming a five‐layer aromatic structure. At temperatures below ?40 °C, the rates of association and dissociation of the complexes were slow on the NMR spectroscopic time scale, allowing the 1 : 1 and 1 : 2 complexes of the trimer host and trinitrobenzene guest(s) to be detected independently when using less than 2 eq of trinitrobenzene. Vis titration experiments revealed the values of K₁ (2.1±0.4×10⁵ M^?1) and K₂ (2.2±0.06×10⁴ M^?1) in CHCl₃ at room temperature.     

Determining the Attenuation Factor in Molecular Wires Featuring Covalent and Noncovalent Tectons

Hybrid covalent/supramolecular porphyrin–fullerene structures were synthesized as highly efficient molecular wires with a remarkably low attenuation factor (β=0.07±0.01 Å^?1). Hydrogen‐bonding interactions and p‐phenylene oligomers of different lengths are responsible for efficient electron transfer in the molecular wires.     

Synthesis,Conformational Interconversion,and Photophysics of Tethered Porphyrin–Fullerene Dyads with Parachute Topology

The synthesis of a porphyrin–fullerene dyad with “parachute” topology is reported. To determine whether the dyad is “flexing” at room temperature, low‐temperature NMR experiments were used. Computational modeling has shown the low‐energy conformation of the dyad to be nonsymmetric. Although, ¹H NMR spectroscopy at room temperature is consistent with a molecule with C_2v symmetry, the spectrum changes on lowering the temperature consistent with “windshield wiper”‐like motion, in which the porphyrin moiety rotates from one side of the C₆₀ sphere to the other. Nanosecond and picosecond fluorescence lifetime experiments show two components contribute to the fluorescence decay, also consistent with the presence of more than one conformer.     

Preparation and evaluation of a novel bonded imidazolium ionic liquid as stationary phase for gas chromatography

1‐Butyl‐3‐[(3‐trimethoxysilyl)propyl]imidazolium chloride ionic liquid was synthesized and chemically modified onto the inner wall of a fused capillary column as a stationary phase for gas chromatography. The 1‐butyl‐3‐[(3‐trimethoxysilyl)propyl]imidazolium chloride ionic liquid bonded capillary column was evaluated in detail. The results revealed that the ionic liquid bonded capillary column exhibited high column efficiency of 1.08 × 10⁴ plates/m, and good chromatographic separation selectivity (α ) for polar and non‐polar substances, and a good thermal stability between room temperature and 400°C. Moreover, the determination of thermodynamic parameters and the linear solvation energy relationship were further carried out. The results indicated that the chromatographic retention of each probe molecule on the ionic liquid bonded stationary phase was an enthalpy‐driven process, and the system constants of the linear solvation energy relationship signified that the dispersion interaction, the hydrogen bonding acidity and hydrogen bonding basicity were dominant interactions between probes and stationary phase among five interactions during the chromatographic separation. However, the contribution of each specific interaction for the stationary phase is ranked as the dispersion interaction > the hydrogen bonding basicity > the hydrogen bonding acidity.     

Silver(I) Complexes with Dithioether Ligands: Syntheses,Crystal Structures,and Fluorescence Properties

Two new dithioether ligands, 1,4‐bis[(phenylsulfanyl)methyl]naphthalene ( L¹ ), and 4,4′‐bis[(tert‐butylsulfanyl)methyl]biphenyl ( L² ) were synthesized and their silver(I) complexes were studied. Both Ag^I complexes, [Ag L¹ (NO₃)]_n ( 1 ) and [Ag L² (NO₃)]₂ ( 2 ), were synthesized at ambient temperature and characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction analysis. Single‐crystal X‐ray analysis shows that complex 1 has a one‐dimensional helical chain structure with the neutral repeating unit [Ag(μ₂‐ L¹ )(NO₃)], whereas complex 2 has a centrosymmetrical neutral dinuclear structure. Moreover, complexes 1 and 2 are further extended into three‐dimensional supramolecular frameworks by hydrogen bonding and π–π stacking interactions, respectively. In addition, complexes 1 and 2 display strong blue emission in the solid state at room temperature.     

Noncovalent Synthesis of Hierarchical Zinc Phosphates from a Single Zn4O12P4 Double‐Four‐Ring Building Block: Dimensionality Control through the Choice of Auxiliary Ligands

In contrast to the well‐known reaction of phosphonic acids RP(O)(OH)₂ with divalent transition‐metal ions that yields layered metal phosphonates [RPO₃M(H₂O)]_n, the 2,6‐diisopropylphenyl ester of phosphoric acid, dippH₂, reacts with zinc acetate in methanol under ambient conditions to afford tetrameric zinc phosphate [(ArO)PO₃Zn(MeOH)]₄ ( 1 ). The coordinated methanol in 1 can be readily exchanged by stronger Lewis basic ligands at room temperature. This strategy opens up a new avenue for building double‐four‐ring (D4R) cubane‐based supramolecular assemblies through strong intercubane hydrogen‐bonding interactions. Seventeen pyridinic ligands have been used to synthesize as many D4R cubanes [(ArO)PO₃Zn(L)]₄ ( 2 – 18 ) from 1 . The ligands have been chosen in such a way that the majority of them contain an additional functional group that could be used for noncovalent synthesis of extended structures. When the ligand does not contain any other hydrogen‐bonding donor–acceptor sites (e.g., 2,4,6‐trimethylpyridine (collidine)), zero‐dimensional D4R cubanes have been obtained. The use of pyridine, lutidine, 2‐aminopyridine, and 2,6‐diaminopyridine, however, results in the formation of linear or zigzag one‐dimensional assemblies of D4R cubanes through strong intermolecular C? H???O or N? H???O interactions. Construction of two‐dimensional assemblies of zinc phosphates has been achieved by employing 2‐hydroxypyridine or 2‐methylimidazole as the exo‐cubane ligand on zinc centers. The introduction of an alcohol side chain on the pyridinic ligand in such a way that the ? CH₂OH group cannot participate in intracubane hydrogen bonding (e.g., pyridine‐3‐methanol, pyridine‐4‐methanol, and 3,5‐dimethylpyrazole‐N‐ethanol) leads to the facile noncovalent synthesis of three‐dimensional framework structures. Apart from being useful as building blocks for noncovalent synthesis of zeolite‐like materials, compounds 1 – 18 can also be thermolyzed at approximately 500 °C to yield high‐purity zinc pyrophosphate (Zn₂P₂O₇) ceramic material.     

Unsolvated 5,10,15,20‐tetra‐4‐pyridylporphyrin,its sesquihydrate and its 2‐chlorophenol disolvate: conformational versatility of the ligand

Unsolvated 5,10,15,20‐tetra‐4‐pyridylporphyrin, C₄₀H₂₆N₈, (I), its sesquihydrate, C₄₀H₂₆N₈·1.514H₂O, (II), and its 2‐chlorophenol disolvate, C₄₀H₂₆N₈·2C₆H₅ClO, (III), reveal different conformational features of the porphyrin core. In (I), the latter is severely deformed from planarity, apparently in order to optimize the intermolecular interactions and efficient crystal packing of the molecular entities. The molecular framework has a C₁ symmetry. In (II), the porphyrin molecules are located on symmetry axes, preserving the marked deformation from planarity of the porphyrin core. The molecular units are interlinked into a single‐framework supramolecular architecture by hydrogen bonding to one another via molecules of water, which lie on twofold rotation axes. In (III), the porphyrin molecules are located across centres of inversion and are characterized by a planar conformation of the 24‐membered macrocyclic porphyrin ring. Two trans‐related pyridyl substituents are hydrogen bonded to the 2‐chlorophenol solvent molecules. The interporphyrin organization in (III) is similar to that observed for many other tetraarylporphyrin compounds. However, the organization observed in (I) and (II) is different and of a type rarely observed before. This study reports for the first time the crystal structure of the unsolvated tetrapyridylporphyrin.     

Halide Anion Mediated Dimerization of a meso‐Unsubstituted N‐Confused Porphyrin

The new N‐confused porphyrin (NCP) derivatives, meso‐unsubstituted β‐alkyl‐3‐oxo N‐confused porphyrin (3‐oxo‐NCP) and related macrocycles, were synthesized from appropriate pyrrolic precursors by a [3+1]‐type condensation reaction. 3‐Oxo‐NCP forms a self‐assembled dimer in dichloromethane that is stabilized by complementary hydrogen‐bonding interactions arising from the peripheral amide‐like moieties. The protonated form of 3‐oxo‐NCP was observed to bind halide anions (F^?, Cl^?) through the outer NH and the inner pyrrolic NH groups, thus affording a dimer in dichloromethane. The structure of the chloride‐bridged dimer in the solid state was determined by X‐ray diffraction analysis.     

Tuning One‐Dimensional Nanostructures of Bola‐Like Peptide Amphiphiles by Varying the Hydrophilic Amino Acids

By combining experimental measurements and computer simulations, we here show that for the bola‐like peptide amphiphiles XI₄X, where X=K, R, and H, the hydrophilic amino acid substitutions have little effect on the β‐sheet hydrogen‐bonding between peptide backbones. Whereas all of the peptides self‐assemble into one dimensional (1D) nanostructures with completely different morphologies, that is, nanotubes and helical nanoribbons for KI₄K, flat and multilayered nanoribbons for HI₄H, and twisted and bilayered nanoribbons for RI₄R. These different 1D morphologies can be explained by the distinct stacking degrees and modes of the three peptide β‐sheets along the x‐direction (width) and the z‐direction (height), which microscopically originate from the hydrogen‐bonding ability of the sheets to solvent molecules and the pairing of hydrophilic amino acid side chains between β‐sheet monolayers through stacking interactions and hydrogen bonding. These different 1D nanostructures have distinct surface chemistry and functions, with great potential in various applications exploiting the respective properties of these hydrophilic amino acids.     

Synthesis of porphyrins bearing uracyl groups and their assembly induced by melamine derivatives

Self‐assembled porphyrins via noncovalent bonding have attracted wide‐ranging researchers in material science. We reported herein the synthesis of the tetraphenyl porphyrin derivatives bearing uracyl groups as acceptor–donor–acceptor (ADA) type hydrogen bonding units, through the condensation of 5,10‐ or 5,15‐bis (3‐amino‐4‐ethylhexylphenyl) porphyrin derivatives with 6‐carboxyuracyl derivatives. When two porphyrins having uracyl groups at the different substituted positions were respectively mixed with a melamine derivative in benzene, ¹H NMR spectra showed that the 5,15 substituted uracyl porphyrin formed a hydrogen‐bonded suprastructure with the melamine derivative as a complementary molecule to the uracyl moiety, although the other 5,10‐substituted uracylporphyrin could not form such a structure. The SEM observation indicated that the mixture with the 5,15‐substituted uracyl porphyrin and the melamine with long alkyl chains formed a sheet‐like structure. Copyright © 2007 John Wiley & Sons, Ltd.     

The Impact of Charge‐Distribution on Photochromic Properties in 1D Coordination Polymers

The reaction of CdCl₂ · 2.5H₂O with 1,1′‐bis(3‐carboxybenzyl)‐4,4′‐bipyridinium dichloride (H₂L1 · Cl₂) or 4,4′‐bis[(3‐carboxypyridino)methyl]‐biphenyl dichloride (H₂L2 · Cl₂) in a dimethylformamide/methanol mixed‐solvent system at room temperature, affording the complexes [(CdCl₂)₃(L1)₃]_n ( 1 ) and {[CdCl₂(L2)(H₂O)₂] · 2H₂O}_n ( 2 ). They were characterized by elemental analyses, IR spectroscopy, and single‐crystal X‐ray diffraction. Both 1 and 2 exhibit 1D coordination networks, which further stack into a 3D supramolecular structure by hydrogen bonding and π–π interactions. Furthermore, these two complexes exhibit different photochromic behavior in the solid state, which may originate from different charge‐distributions of H₂L1 · Cl₂ and H₂L2 · Cl₂ ligands.     

Syndiotactic‐specific radical polymerization of N,N‐dimethylacrylamide in the presence of tartrates: A proposed mechanism for the polymerization

Radical polymerization of N,N‐dimethylacrylamide (DMAAm) was investigated in the presence of tartrates, such as diethyl L ‐tartrate, diisopropyl L ‐tartrate, and di‐n‐butyl L ‐tartrate, in toluene at low temperatures. Syndiotactic polymers were obtained in the presence of tartrates, whereas isotactic polymers were obtained in the absence of tartrates. The syndiotactic‐specificity increased with increasing amount of tartrates and with decreasing polymerization temperature. NMR analysis suggested that DMAAm and tartrates formed a 1:1 complex through double hydrogen bonding. A mechanism for the syndiotactic‐specific radical polymerization of DMAAm is proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1192–1203, 2009     

Exploring Supramolecular Self‐Assembly of Tetraarylporphyrins by Halogen Bonding: Crystal Engineering with Diversely Functionalized Six‐Coordinate Tin(L)2–Porphyrin Tectons

This study targets the construction of porphyrin assemblies directed by halogen bonds, by utilizing a series of purposely synthesized Sn(axial ligand)₂–(5,10,15,20‐tetraarylporphyrin) [Sn(L)₂‐TArP] complexes as building units. The porphyrin moiety and the axial ligands in these compounds contain different combinations of complimentary molecular recognition functions. The former bears p‐iodophenyl, p‐bromophenyl, 4′‐pyridyl, or 3′‐pyridyl substituents at the meso positions of the porphyrin ring. The latter comprises either a carboxylate or hydroxy anchor for attachment to the porphyrin‐inserted tin ion and a pyridyl‐, benzotriazole‐, or halophenyl‐type aromatic residue as the potential binding site. The various complexes were structurally analyzed by single‐crystal X‐ray diffraction, accompanied by computational modeling evaluations. Halogen‐bonding interactions between the lateral aryl substituents of one unit of the porphyrin complex and the axial ligands of neighboring moieties was successfully expressed in several of the resulting samples. Their occurrence is affected by structural (for example, specific geometry of the six‐coordinate complexes) and electronic effects (for example, charge densities and electrostatic potentials). The shortest intermolecular I???N halogen‐bonding distance of 2.991 Å was observed between iodophenyl (porphyrin) and benzotriazole (axial ligand) moieties. Manifestation of halogen bonds in these relatively bulky compounds without further activation of the halophenyl donor groups by electron‐withdrawing substituents is particularly remarkable.     

Supramolecular Structures with the 2‐Propyl‐4,5‐dicarboxy‐1H‐imidazole Ligand: Hydrothermal Synthesis,Structures, and Photoluminescence

Self‐assembly of the rigid organic ligand 2‐propyl‐4,5‐dicarboxy‐1H‐imidazole ( L ) with different metal ions (Zn²⁺, Ni²⁺, Cu²⁺, Cd²⁺) led to four new complexes, namely, [M( L )(phen)] [M = Zn ( 1 ); Ni ( 2 ); Cd ( 3 )] and [Cu( L )( 4 )] (phen = 1,10‐phenanthroline). Their structures were determined by single‐crystal X‐ray diffraction analyses, and they were further characterized by elemental analysis, IR spectroscopy, and thermogravimetric analysis. Whereas compounds 1 , 2 , and 3 are discrete units, hydrogen‐bonding interactions play a vital role in these complexes. Compounds 1 and 2 form one‐dimensional (1D) and two‐dimensional (2D) structures through hydrogen‐bondinginteractions with helical character. In 1 , the hydrogen bonds (O–H ··· O) alternately bridge the M^II cations of the discrete units to form a one‐dimensional (1D) infinite helical chain. Complex 2 forms a 2D helical layer through parallel hydrogen bonds (N/O–H ··· O/N) between two adjacent helical chains. In 3 , the hydrogen bonds (N–H ··· O) connect adjacent discrete units into a ten‐membered ring with extension into a one‐dimensional double‐chain supramolecular structure. Complex 4 is a two‐dimensional gridlike (4,4) topological layer which is extended to a 3D network by hydrogen bonding. The solid‐state fluorescence spectrum of complex 3 was determined.     

Triple hydrogen‐bonding block copolymers via RAFT polymerization: Synthesis,vesicle formation,and molecule‐recognition behavior

Reversible addition fragmentation chain transfer polymerization afforded triple hydrogen‐bonding block copolymers (PBA‐b‐PDAD) with well‐controlled molecular weight and molecular weight distributions (1.2–1.4). The complexation via specific hydrogen bonding between these block copolymers in CHCl₃ provided an unprecedented approach for the formation of spherical vesicles. Atomic force microscopy and dynamic light‐scattering measurements revealed that the resultant polymeric vesicles were about 100 nm in radius. Triple hydrogen‐bonding interactions between maleimide and PBA‐b‐PDAD resulted in the dissociation of these spherical vesicles, facilitating the guest molecule recognition. The hydrogen‐bonding interaction between maleimide and the PBA‐b‐PDAD was further confirmed by ¹H NMR and FTIR spectra. These results indicated that these vesicles of triple hydrogen‐bonding block copolymer could be a potential new vehicle for molecular recognition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1633–1638     

Syntheses,Spectroscopic, Structural,Fluorescent and Thermal Properties of Bis(saccharinato)copper(II) Complexes with two Bis(pyridylamine) Ligands

Two new copper(II) complexes of saccharinate (sac) with bis(2‐pyridylmethyl)amine (bpma) and N,N′‐bis[1‐(pyridin‐2‐yl)ethylidene]ethane‐1,2‐diamine (bapen), [Cu(bpma)(sac)₂] · H₂O ( 1 ) and [Cu(bapen)(sac)₂] ( 2 ), were synthesized and characterized by elemental analysis, TG‐DTA, X‐ray diffraction, and UV/Vis and IR spectroscopy, respectively. In 1 , the copper(II) ion is coordinated by two N‐bonded sac ligands, and three nitrogen atoms of bpma, in a distorted square‐pyramidal coordination arrangement, whereas the arrangement around the copper ion in 2 is a distorted octahedron with two N‐coordinated sac ligands and a tetradentate bapen ligand. In addition to hydrogen bonding involving the water molecule in 1 , the mononuclear species of 1 and 2 are further connected by weak intermolecular C–H ··· π and C–H ··· O interactions to form a three‐dimensional network. Both complexes are luminescent at room temperature and their emissions seem to be due to ligand‐based π–π* transitions.     

Modification of Supramolecular Binding Motifs Induced By Substrate Registry: Formation of Self‐Assembled Macrocycles and Chain‐Like Patterns

The self‐assembly properties of two Zn^II porphyrin isomers on Cu(111) are studied at different coverage by means of scanning tunneling microscopy (STM). Both isomers are substituted in their meso‐positions by two voluminous 3,5‐di(tert‐butyl)phenyl and two rod‐like 4′‐cyanobiphenyl groups, respectively. In the trans‐isomer, the two 4′‐cyanobiphenyl groups are opposite to each other, whereas they are located at right angle in the cis‐isomer. For coverage up to one monolayer, the cis‐substituted porphyrins self‐assemble to form oligomeric macrocycles held together by antiparallel CN???CN dipolar interactions and CN???H‐C(sp²) hydrogen bonding. Cyclic trimers and tetramers occur most frequently but everything from cyclic dimers to hexamers can be observed. Upon annealing of the samples at temperatures >150 °C, dimeric macrocyclic structures are observed, in which the two porphyrins are bridged by Cu atoms, originating from the surface, under formation of two CN???Cu???NC coordination bonds. The trans‐isomer builds up linear chains on Cu(111) at low coverage, whereas for higher coverage the molecules assemble in a periodic, densely packed structure. Both cis‐ and trans‐bis(4′‐cyanobiphenyl)‐substituted Zn^II porphyrins behave very differently on Cu(111) compared to similar porphyrins in literature on less reactive surfaces such as Au(111) and Ag(111). On the latter surfaces, there is no signal visible between molecular orientation and the crystal directions of the substrate, whereas on Cu(111), very strong adsorbate–substrate interactions have a dominating influence on all observed structures. This strong porphyrin–substrate interaction enables a much broader variety of structures, including also less favorable intermolecular bonding motifs and geometries.     

通过稀土离子和羧酸配体组装成的两种新型的二维配位聚合物的合成、晶体结构及荧光性质

利用水热法合成了两种新型的二维（2D）稀土配位聚合物[Ln(PDC)(OH)(H2O)2]n (Ln = Eu (1) and Tb (2), H2PDC = 3,4-吡啶二羧酸),通过元素分析、红外光谱、热分析和X射线单晶衍射等技术对其进行了表征。单晶结构分析表明这两种配合物都显示出包含有一维Ln-O-Ln链的二维层状结构,层间又进一步通过 π-π 堆积和氢键作用扩展成三维超分子网络结构。此外,这两种配合物的固体在室温下都有强的荧光发射。     

Structures and Fluorescent Properties of Cadmium(II) Complexes with 1D and 2D Structures Based on Tridentate Benzimidazole Ligands

The cadmium(II) complexes [CdL1(m‐nba)₂] ( 1 ), [CdL1(p‐nba)₂] · C₂H₅OH ( 2 ), [CdL2(p‐nba)₂] · CH₃OH ( 3 ), and [CdL2(p‐nbat)₂] ( 4 ) containing the ligands L1 and L2 [L1 = 2,6‐bis(benzimidazol‐2‐yl)pyridine, L2 = bis(2‐benzimidazolylmethyl)amine] were synthesized and characterized (m‐nba, p‐nba, and p‐nbat are the anions of p‐nitrobenzoic acid, m‐nitrobenzoic acid, and p‐nitrobenzeneacetic acid, respectively). The complexes were investigated by X‐ray single crystal diffraction, elemental analysis as well as IR and fluorescence spectroscopy. Compounds 1 – 3 contain a distorted pentagonal bipyramidal coordination sphere with Cd^II coordinated by two carboxylate ligands in bidentate‐chelating mode, whereas complex 4 exhibits a distorted octahedral arrangement with one carboxylate ligand in bidentate‐chelating and the other in monodentate coordination mode. 1 and 2 form a 1D chain interplayed by hydrogen bonding and strong π–π stacking interactions. 3 and 4 vary from 1D chain into 2D single‐layer and double‐layer networks because of more extensive hydrogen bonding interactions. The complexes show emission maxima in the blue region in the solid state and emission bands are red‐shifted compared to those of the free ligands.