Pd layers on a W(100) surface

Pd films from zero to several monolayers in thickness on a W(100) surface are studied by AES, LEED, work function change (A0) measurements and TDS. Similar to other metals on W, the adsorption and annealing behaviour differs drastically from that on the W(110) surface but resembles the behaviour of other metals on the W(100) and Mo(100) surface.     

Reconstructed domains on a stepped W(100) surface

A model calculation is carried out for the scattering of low energy electron diffraction from reconstructed (√2 × √2)R45° domains on a stepped W(100) surface. The existence of monotonically increasing steps causes the integral order beams to split and the separation of the splitting oscillates with the incident electron energy. We show that due to the existence of an antiphase relationship among the randomly nucleated reconstructed domains, the half-order beams neither split nor oscillate with the incident electron energy. This nonsplitting of half order beams is in agreement with the observation by Debe and King (DK). We also show that the measured intensity profile of a half order beam is equal to the signal intensity profile from the individual finite size domains convoluted with the instrument response function. This gives a simple way to evaluate the reconstructed domain size quantitatively. From the angular distribution of the half-order beam intensity we deduce that the reconstructed domains are somewhat round in shape, instead of the “long strips” proposed by DK. Also, the long range inhibition (20 Å) of the reconstruction near the step edge suggested by DK does not necessarily follow from our analysis. As a matter of fact, there is evidence showing that the inhibition (if it exists at all) can be short range in nature. Our suggestion is in agreement with the observation of the reconstructed W(100) surface by Melmed, Tung, Graham and Smith using FIM technique.     

SIMS,EID and flash-filament investigation of O2, H2, (O2 + H2) and H2O interaction with vanadium

Comparative investigations of secondary ion emission, electron induced ion emission and flash filament signals from polycrystalline vanadium surfaces exposed to well-defined O₂, H₂, H₂O and (O₂ + H₂) doses (<500 L) have been carried out. The vanadium target could be heated and bombarded by either electrons (300 eV) or ions (3 keV) under ultra high vacuum conditions (<10^?10 Torr). The investigations were carried out with a computer controlled ultra high vacuum mass spectrometer. The experimental results establish exact reproducible spectra of well defined surface layers. They give detailed insight into the reactions between H₂, O₂ H₂O and vanadium, and some interactions between these species. They further indicate the importance of bulk and surface diffusion as well as the influence of the probing ion and electron bombardment. A clear distinction between bulk oxygen, surface oxides, and adsorbed oxygen for the vanadium-oxygen interaction at room temperature could be established. For the interaction of hydrogen with clean and oxygen covered vanadium surfaces the formation of adsorbed hydrogen, bulk solution of hydrogen, and the formation of OH groups and H₂O could be demonstrated. A detection limit below 10^?5 of one single monolayer for metal bonded hydrogen could be established.     

The interaction of oxygen and nitrogen with the niobium (100) surface: I. Morphology

Low energy electron diffraction has been used to investigate the reactions between nitrogen and oxygen and the (100) face of niobium. Several different oxygen containing surface structures were observed.     

The interaction of oxygen with the Rh(111) surface a

The adsorption of oxygen on Rh(111) at 100 K has been studied by TDS, AES, and LEED. Oxygen adsorbs in a disordered state at 100 K and orders irreversibly into an apparent (2 × 2) surface structure upon heating to T? 150 K. The kinetics of this ordering process have been measured by monitoring the intensity of the oxygen $\text{(1,}\text{1}\text{2}\text{) LEED}$ beam as a function of time with a Faraday cup collector. The kinetic data fit a model in which the rate of ordering of oxygen atoms is proportional to the square of the concentration of disordered species due to the nature of adparticle interactions in building up an island structure. The activation energy for ordering is $\text{13.5 ± 0.5}\text{kcal}\text{mole}$. At higher temperatures, the oxygen undergoes a two-step irreversible disordering (T? 280 K) and dissolution (T?400K) process. Formation of the high temperature disordered state is impeded at high oxygen coverages. Analysis of the oxygen thermal desorption data, assuming second order desorption kinetics, yields values of 56 ± 2 kcal/ mole and 2.5 ± 10^?3 cm² s^?1 for the activation energy of desorption and the pre-exponential factor of the desorption rate coefficient, respectively, in the limit of zero coverage. At non-zero coverages the desorption data are complicated by contributions from multiple states. A value for the initial sticking probability of 0.2 was determined from Auger data at 100 K applying a mobile precursor model of adsorption.     

Investigation of the interaction of oxygen with an Al(100) surface by work function methods

The change in work function (Δφ) of an Al(100) surface due to oxygen adsorption at different pressures (10⁻⁶– 10⁻⁵ Torr) and different crystal temperatures (115–600 K) has been investigated. The data show an initially positive Δφ at low temperatures and negative Δφ values for temperatures above 160 K. The results are pressure independent during the first 500 L oxygen exposure but become pressure dependent at higher exposures. Measurements of Δφ in vacuum after exposure to 1040 L O₂ show a nearly exponential decrease of Δφ with time. The time constants of this exponential behaviour are temperature dependent and vary between 1.5 min for 370 K and 33 min at 115 K. These time dependent effects are believed to be related to the movement of adsorbed oxygen to sites below the aluminum surface.     

The interaction of oxygen and nitrogen with the niobium (100) surface: II. Reaction kinetics

Auger spectroscopy has been used to investigate the interactions of oxygen and nitrogen with both the (100) face niobium and with polycrystalline niobium. Sticking coefficients for both gases have been determined as a function of coverage. A temperature and concentration ependent segregation of oxygen at the surface has been observed even under conditions where the solid solubility of the bulk was not exceeded. A model to describe this segregation has been developed and extended to explain discrepancies in earlier investigations f the reaction of oxygen with niobium.     

Hydrogen-induced reconstruction on W(100) and Mo(100) by surface infrared spectroscopy

Infrared absorption and low-energy electron-diffraction measurements of H adsorbed on W(100) and Mo(100) show that on each surface, distinct wavenumbers characterize the H-substrate stretching modes associated with the different long-range structures of the complicated T-θ phase diagram. Hydrogen is bonded at a two-fold bridge site at all temperatures and coverages investigated and the wavenumber of the symmetric stretch mode, v₁, is determined by the local geometry, i.e. the substrate dimer length. Analysis of the coverage dependence of the v₁ wavenumber shows that, at low coverages (θ ≲0.3), the effective H-H interactions are very different for the two substrates, leading to a uniform H layer on W(100) and to island formation on Mo(100). In general, the phase transitions are continuous on W(100), with regions of intermediate structures, and first order on Mo(100), with regions of coexisting phases.     

Growth of germanium thin films on the W(100) surface

The growth of Ge thin films on the surface of a textured predominantly (100)-oriented tungsten ribbon is studied by thermal desorption spectrometry at different substrate temperatures over a wide range of coverages. The mechanism of growth of the Ge films at T = 300 K is similar to a layer-by-layer mechanism. For T > 300 K, the films grow through the Stranski-Krastanov mechanism, according to which the completion of the monolayer coverage is followed by the formation of three-dimensional crystallites; as a result, the desorption kinetics changes. For small coverages (i.e., in the absence of lateral interactions), the activation energy of Ge desorption from W(100) is E = 4.9 ± 0.2 eV. In a monolayer, this activation energy decreases to E = 3.9 ± 0.2 eV due to the repulsive lateral interactions. The energy of pairwise lateral interactions is determined to be ω = 0.3 eV.     

Adsorption of oxygen on W(100): Adsorption kinetics and structure

The adsorption of oxygen on W(100) single crystal surfaces is studied by Auger electron spectroscopy (AES), flash desorption, low-energy electron diffraction (LEED) and retarding field work function measurements with the aim of obtaining a better understanding of the adsorption kinetics and of the structures of the adsorbed layer. The AES results reveal step-wise changes of the sticking coefficients in the coverage range 0 to 1, and activated adsorption at higher coverages. Upon room temperature adsorption a series of complex LEED patterns is observed. In layers adsorbed at 1050 K and cooled to room temperature, the well-known p(2 × 1) structure is the first ordered structure observed. This structure shows a reversible order-disorder transition between 700 K and 1000 K and is characterized by a work function which is lower than that of the clean surface. Heating room temperature adsorbates changes their structure irreversibly. At temperatures below 750 K some new structures are observed. Combining the results obtained in this study with other published work leads to a considerable revision of the previously accepted model of the adsorption of oxygen on W(100).     

SIMS investigations of hydrogen interaction with a zirconium getter alloy surface

The results from secondary ion mass spectrometry (SIMS) investigations of the surface of Zr₅₀V₅₀ intermetallic getter alloy under residual and elevated partial pressures of hydrogen at different temperatures are reported.     

Distorted surface oxygen structure on UO2(100)

Low-energy electron diffraction (LEED) has been combined with ion-scattering spectroscopy (ISS) measurements of He⁺ at 500 eV to characterize experimentally the surface structure formed by oxygen atoms on UO₂(100). Insight into the surface geometry required to generate the LEED features was gained via laser transform simulation and kinematical diffraction analysis of two-dimensional arrays. Integrating the above approaches leads to a UO₂(100) surface model consisting of a monolayer of oxygen atoms arranged in distorted bridge-bond, zig-zag chains along 〈100〉 directions. Configurational energies were calculated which support the distorted UO₂(100) zig-zag structure.