Electrochemical Post‐Functionalization of Conducting Polymers

This article summarizes recent progress in the post‐functionalization of conjugated polymers by electrochemical methods. These electrochemical polymer reactions typically proceed via electrochemical doping of a conjugated polymer film, followed by chemical transformation. Examples include the quantitative oxidative fluorination of polyfluorenes and oxidative halogenation of polythiophenes, as well as the reductive hydrogenation of polyfluorenones. The degree of functionalization, otherwise known as the reaction ratio, can be controlled by varying the charge passed through the polymer, allowing the optoelectronic properties of the conjugated polymers to be tailored. Wireless bipolar electrodes with an in‐plane potential distribution are also useful with regard to the electrochemical doping and reaction of conjugated polymers and allow the synthesis of films exhibiting composition gradients. Such bipolar electrochemistry can induce multiple reaction sites during electrochemical polymer reactions.

     

Light‐Induced Disintegration of Robust Physically Cross‐Linked Polymer Networks

Photodegradable physically cross‐linked polymer networks are prepared from self‐assembly of photolabile triblock copolymers. Linear triblock copolymers composed of poly (o‐nitrobenzyl methacrylate) and poly(ethylene glycol) (PEG) segments of variable molecular weights were synthesized using atom transfer radical polymerization. Triblock polymers with low‐molecular‐weight PEG segments form solid films upon hydration with robust mechanical properties including a Young's modulus of 76 ± 12 MPa and a toughness of 108 ± 31 kJ m⁻³. Triblock polymers with high‐molecular‐weight PEG segments form physically cross‐linked hydrogels at room temperature with a dynamic storage modulus of 13 ± 0.6 kPa and long‐term stability in hydrated environments. Both networks undergo photodegradation upon irradiation with long wave UV light.

     

Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Influence of Side‐Chain Composition on Polythiophene Properties and Supramolecular Assembly of Anionic Polythiophene Derivatives

A series of 10 polythiophene derivatives is reported, in which each polymer has a different percentage of carboxylic acid‐bearing repeat units. The properties of these polymers are explored under acidic conditions, where the carboxylic acid moieties remain neutral, and under basic conditions, where the carboxylic acid units become anionic carboxylates. The properties that are examined for both solutions and films include UV–vis absorption spectroscopy, photoluminescence spectroscopy, and red‐edge optical band gaps. All the properties studied are strongly dependent both on protonation state and percentage of carboxylic acid/carboxylate side chains along the polymer backbone. The anionic form of each polythiophene derivative was also used in layer‐by‐layer film deposition with a cationic phosphonium polyelectrolyte. The film growth process was studied by spectroscopic techniques to assess the influence of side‐chain composition on the film growth and optical properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Synthesis and Photovoltaic Properties of Polythiophene Incorporating with 3,4-Difluorothiophene Units

Two polythiophene derivatives using fluorine atoms and hexyl or hexyloxy group as electron-withdrawing and donating substituents have been synthesized. The introduction of fluorine atoms to the polythiophene backbones simultaneously lowers the HOMO and narrows the bandgap, and the stronger electron-donating ability of hexyloxy side chain further reduces the bandgap. As a result, poly[3-hexylthiophene-2,5-diyl-alt-3,4-difluorothiophene] （PHTDFT） shows HOMO and bandgap of -5.31/1.83 eV and poly[3,4-dihexyloxythiophene-2,5-diyl-alt-3,4-di- fluorothiophene] （PDHOTDFT） shows HOMO and bandgap of -5.14/1.68 eV, both are lower than --4.76/2.02 eV of P3HT. Benefiting from the lower HOMO, PHTDFT：PC61BM （1 ＂ 1） polymer solar cells obtain a power conversion efficiency of 1.11% and an impressed open-circuit voltage of 0.79 V under solar illumination AM1.5 （100 mW/cm2）.     

Cross‐Linked Conjugated Polymers for Achieving Patterned Three‐Color and Blue Polymer Light‐Emitting Diodes with Multi‐Layer Structures

Reactions between the ethylene groups in the backbone of conjugated polymers under UV illumination and heat treatment result in the cross‐linking of the main polymer chains. The cross‐linking leads to two simultaneous results in the polymer: excellent solvent resistance and increased bandgap. Using this reaction, three‐color polymer light‐emitting diodes (PLEDs) with a multi‐layer structure can be easily realized by a dry photo‐pattern in an active‐gas‐free environment. Multi‐layer blue devices with dramatically enhanced efficiency can also be achieved conveniently.

     

Scalable Photoelectrochemical Dehydrogenative Cross‐Coupling of Heteroarenes with Aliphatic C−H Bonds

Heteroarenes are structural motifs found in many bioactive compounds and functional materials. Dehydrogenative cross‐coupling of heteroarenes with aliphatic C?H bonds provides straightforward access to functionalized heteroarenes from readily available materials. Established methods employ stoichiometric chemical oxidants under conditions of heating or light irradiation. By merging electrochemistry and photochemistry, we have achieved efficient photoelectrochemical dehydrogenative cross‐coupling of heteroarenes and C(sp³)?H donors through H₂ evolution, without the addition of metal catalysts or chemical oxidants. Mechanistically, the C(sp³)?H donor is converted to a nucleophilic carbon radical through H‐atom transfer with chlorine atom, which is produced by light irradiation of anodically generated Cl₂ from Cl^?. The carbon radical then undergoes radical substitution to the heteroarene to afford alkylated heteroarene products.     

Electrosynthesis of Chirality Conducting Poly[N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine] with Good Blue Light‐Emitting Properties

Poly[N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine] (PN9FPA) films with good fluorescence properties and chirality were prepared electrochemically by direct anodic oxidation of N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine (N9FPA) in boron trifluoride diethyletherate (BFEE). Fourier transform infrared spectroscopy measurement showed that the polymerization of N9FPA occurred mainly at the C(2) and C(7) positions. The fluorescence spectra indicated that PN9FPA films were blue‐light emitters. In addition, the structures and properties of the monomer and the polymers were characterized and evaluated with CV, UV, TGA and SEM.     

Comparison of Loading Efficiency between Hyperbranched Polymers and Cross‐Linked Nanogels at Various Branching Densities

The effect of branching point structures and densities is studied between azido‐containing hyperbranched polymers and cross‐linked nanogels on their loading efficiency of alkynyl‐containing dendron molecules. Hyperbranched polymers that contained “T”‐shaped branching linkage from which three chains radiated out and cross‐linked nanogels that contained “X”‐shaped branching linkage with four radiating chains are synthesized in microemulsion using either atom transfer radical polymerization (ATRP) or conventional radical polymerization (RP) technique. Both polymers have similar density of azido groups in the structure and exhibit similar hydrodynamic diameter in latexes before purification. Subsequent copper‐catalyzed azide–alkyne cycloaddition reactions between these polymers and alkynyl‐containing dendrons in various sizes (G1–G3) demonstrate an order of dendron loading efficiencies (i.e., final conversion of alkynyl‐containing dendron) as hyperbranched polymers > nanogels synthesized by ATRP > nanogels synthesized by RP. Decreasing the branching density or using smaller dendron molecules increases the click efficiency of both polymers. When G2 dendrons with a molecular weight of 627 Da are used to click with the hyperbranched polymers composed of 100% inimer, a maximum loading efficiency of G2 in the loaded hyperbranched polymer is 58% of G2 by weight. These results represent the first comparison between hyperbranched polymers and cross‐linked nanogels to explore the effect of branching structures on their loading efficiencies.

     

Novel Disubstituted Phenylene‐Linked Bis‐imidazole Derivatives: Facile Synthesis and Optical Properties

Six novel disubstituted phenylene‐linked bis‐imidazole derivatives, 3a – 3f , were prepared by a one‐pot, microwave‐assisted method under solvent‐free conditions, in yields ranging from 61.6 to 85.6%. The new compounds were characterized by ¹H‐ and ¹³C‐NMR, UV/VIS, and fluorescence spectroscopy, and mass spectrometry, as well as by elemental analyses. The influence of substituents and solvents on the optical properties of 3a – 3f was investigated. It was found that there is little influence on absorption and excitation spectra in contrast to emission spectra. Compounds 3a – 3f exhibit strong fluorescence in solution, their fluorescence quantum yields ranging from 0.27 to 0.96.     

Generating Hydrated Electrons for Chemical Syntheses by Using a Green Light‐Emitting Diode (LED)

We present the first working system for accessing and utilizing laboratory‐scale concentrations of hydrated electrons by photoredox catalysis with a green light‐emitting diode (LED). Decisive are micellar compartmentalization and photon pooling in an intermediate that decays with second‐order kinetics. The only consumable is the nontoxic and bioavailable vitamin C. A turnover number of 1380 shows the LED method to be on par with electron generation by high‐power pulsed lasers, but at a fraction of the cost. The extreme reducing power of the electron and its long unquenched life as a ground‐state species are synergistic. We demonstrate the applicability to the dechlorination, defluorination, and hydrogenation of compounds that are inert towards all other visible‐light photoredox catalysts known to date. A comprehensive mechanistic investigation from microseconds to hours yields results of general validity for photoredox catalysis with photon pooling, allowing optimization and upscaling.     

The Production and Characterisation of Novel Conducting Redox‐Active Oligomeric Thin Films From Electrooxidised Indolo[3,2,1‐jk]carbazole

Novel thin‐film materials have been produced from indolo[3,2,1‐jk]carbazole (see picture). These are conducting and redox‐active and, unusually, consist of three distinct covalently coupled luminescent dimer species, consistent with a specific radical‐cation coupling mechanism.

     

Efficient Green‐Light‐Emitting Electrochemical Cells Based on Ionic Iridium Complexes with Sulfone‐Containing Cyclometalating Ligands

A new approach to obtain green‐emitting iridium(III) complexes is described. The synthetic approach consists of introducing a methylsulfone electron‐withdrawing substituent into a 4‐phenylpyrazole cyclometalating ligand in order to stabilize the highest‐occupied molecular orbital (HOMO). Six new complexes have been synthesized incorporating the conjugate base of 1‐(4‐(methylsulfonyl)phenyl)‐1 H‐pyrazole as the cyclometalating ligand. The complexes show green emission and very high photoluminescence quantum yields in both diluted and concentrated films. When used as the main active component in light‐emitting electrochemical cells (LECs), green electroluminance is observed. High efficiencies and luminances are obtained at low driving voltages. This approach for green emitters is an alternative to the widely used fluorine‐based substituents in the cyclometalating ligands and opens new design possibilities for the synthesis of green emitters for LECs.     

Biodegradable Phosphorylcholine Polymer Hydrogels Cross‐Linked with Vinyl‐Functionalized Polyphosphate

A vinyl‐functionalized polyphosphate (PIOP) was synthesized by ring‐opening polymerization of 2‐isopropyl‐2‐oxo‐1,3,2‐dioxaphospholane and 2‐(2‐oxo‐1,3,2‐dioxaphosphoroyloxyethyl methacrylate) with triisobutylaluminum as an initiator. The number‐averaged molecular weight of the PIOP was 1.2 × 10⁴. The average number of vinyl groups in the PIOP is 2.20. Transparent hydrogels were prepared by the radical polymerization of 2‐methacryroyloxyethyl phosphorylcholine with PIOP as a cross‐linking reagent. These hydrogels may have many applications in the biomedical field because of their biodegradability and biocompatibility.

Synthetic route of PIOP.     

Dual‐Physical Cross‐Linked Tough and Photoluminescent Hydrogels with Good Biocompatibility and Antibacterial Activity

Development of novel photoluminescent hydrogels with toughness, biocompatibility, and antibiosis is important for the applications in biomedical field. Herein, novel tough photoluminescent lanthanide (Ln)‐alginate/poly(vinyl alcohol) (PVA) hydrogels with the properties of biocompatibility and antibiosis have been facilely synthesized by introducing hydrogen bonds and coordination bonds into the interpenetrating networks of Na‐alginate and PVA, via approaches of frozen‐thawing and ion‐exchanging. The resultant hydrogels exhibit high mechanical strength (0.6 MPa tensile strength, 5.0 tensile strain, 6.0 MPa compressive strength, and 900 kJ m⁻³ energy dissipation under 400% stretch), good photoluminescence as well as biocompatibility and antibacterial activity. The design strategy provides a new avenue for the fabrication of multifunctional photoluminescent hydrogels based on biocompatible polymers.

     

Nondoped Deep‐Blue Organic Light‐Emitting Diodes with Color Stability and Very Low Efficiency Roll‐Off: Solution‐Processable Small‐Molecule Fluorophores by Phosphine Oxide Linkage

A series of solution‐processable small molecules PO1 – PO4 were designed and synthesized by linking N‐phenylnaphthalen‐1‐amine groups to a phenyl phosphine oxide core through a π‐conjugated bridge, and their thermal, photophysical, and electrochemical properties were investigated. The phosphine oxide linkage can disrupt the conjugation and allows the molecular system to be extended to enable solution processability and high glass transition temperatures (159–181 °C) while preserving the deep‐blue emission. The noncoplanar molecular structures resulting from the trigonal‐pyramidal configuration of the phosphine oxide can suppress intermolecular interactions, and thus these compounds exhibit strong deep‐blue emission both in solution and the solid state with high photoluminescent quantum yield (PLQY) of 0.88–0.99 in dilute toluene solution. Solution‐processed nondoped organic light‐emitting diodes featuring PO4 as emitter achieve a maximum current efficiency of 2.36 cd A^?1 with CIE coordinates of (0.15, 0.11) that are very close to the NTSC blue standard. Noticeably, all devices based on these small‐molecular fluorescent emitters show striking deep‐blue electroluminescent color stability and extremely low efficiency roll‐off.     

Synthesis and photovoltaic properties of low‐bandgap 4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole‐based poly(heteroarylenevinylene)s

Three novel low‐bandgap copolymers containing alkylated 4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole (HBT) and different electron‐rich functional groups (dialkylfluorene (PFV‐HBT), dialkyloxyphenylene (PPV‐HBT) and dialkylthiophene (PTV‐HBT)) were prepared by Horner polycondensation reactions and characterized by ¹H NMR, gel permeation chromatography, and elemental analysis. The alkyl side chain brings these polymeric materials good solubility in common organic solvents, which is critical for the manufacture of solar cells in a cost‐effective manner. The copolymers exhibit low optical bandgap from 1.48 to 1.83 eV. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of the copolymers were measured by cyclic voltammetry. Theoretical calculations revealed that the variation laws of HOMO and the LUMO energy levels are well consistent with cyclic voltammetry measurement. The bulk heterojunction photovoltaic devices with the structure of ITO/PEDOT‐PSS/polymer:PCBM/LiF/Al were fabricated by using the three copolymers as the donor and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) as the acceptor in the active layer. The device based on PTV‐HBT:PCBM (1:4 w/w) achieved a power conversion efficiency of 1.05% under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and Properties of a Novel Thiophene‐Based Conducting Copolymer with Mesogenic Groups Attached Parallel to the Polymer Backbone

Summary: A novel thiophene‐based conducting copolymer has been synthesised with mesogenic groups attached parallel to the conducting polymer backbone; preliminary data are reported on its properties. These indicate that as the nonmesogenic intermediate polymer is converted into a liquid‐crystalline polymer there is a significant increase in conductivity. Measurement of the temperature‐dependent conductivity indicates a reduction of the activation energy in the liquid‐crystalline phase.

Poly[(1‐(thiophene‐3‐methyloxy)‐6‐(4‐n‐hexyloxy‐2‐oxybenzoic acid)hexane)‐co‐(3‐n‐hexylthiophene)].