Ligand‐free,copper‐catalyzed,one‐pot,three‐component synthesis of novel 1,2,3‐triazole‐linked indoles in magnetized water

Magnetized water (MW) is used as a green and new solvent‐promoting medium for the one‐pot, three‐component synthesis of novel 1,2,3‐triazole‐linked indoles catalyzed by copper iodide. A broad range of 2‐aryl‐1‐(prop‐2‐ynyl)‐1H‐indole‐3‐carbaldehydes were reacted with alkyl halides and sodium azide via copper‐catalyzed azide–alkyne cycloaddition reactions in MW in the absence of any ligand. This method offers the advantages of short reaction times, green procedure, low cost, simple work‐up, quantitative reaction yields, and no need for any organic solvent.     

Perchloric Acid–Silica (HClO4⋅SiO2)‐Catalyzed Synthesis of 14‐Alkyl‐ or 14‐Aryl‐14H‐dibenzo[a,j]xanthenes and N‐[(2‐Hydroxynaphthalen‐1‐yl)methyl]amides

The synthesis of 14‐aryl‐ or 14‐alkyl‐14H‐dibenzo[a,j]xanthenes 3 involving the treatment of naphthalen‐2‐ol ( 1 ) with arenecarboxaldehydes or alkanals 2 in the presence of HClO₄?SiO₂ as a heterogeneous catalyst was achieved (Table 1), and this reaction was extended to the preparation of N‐[(2‐hydroxynaphthalen‐1‐yl)methyl]amides 5 by a three‐component reaction with urea ( 4a ) or an amide 4b – d as a third reactant (Table 2).     

Copper‐Catalyzed N‐Arylation of Polysubstituted Pyridines Synthesized by the Novel Reaction of N‐Sulfonyl Ketenimine and Malononitrile‐Trichloroacetonitrile Adduct

In this study, we synthesized some new derivatives of N‐(4‐amino‐5‐cyano‐6‐(trichloromethyl)pyridin‐2‐yl)alkyl sulfonamides in the presence of a copper catalyst. A one‐pot reaction system was used, and four components participated in the process. These four components were sulfonyl azides, terminal alkynes, malononitrile, and trichloroacetonitrile. The reaction rate was increased by the use of copper (I) iodide as the catalyst and tetrahydrofuran was used as the solvent. We achieved the final compounds in moderate to good yields. Moreover, we converted “NH₂” side group to N‐aryl by the use of various aryl halide analogs in acetonitrile as the solvent, under mild reaction and at the room temperature.     

Dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe3O4@SiO2 nanoparticles as a novel recyclable catalyst for N‐arylation of nitrogen heterocycles and green synthesis of 5‐substituted 1H‐tetrazoles

In this study, dendrimer‐encapsulated Cu(Π) nanoparticles immobilized on superparamagnetic Fe₃O₄@SiO₂ nanoparticles were prepared via a multistep‐synthesis. Then, the synthesized composite was fully characterized by various techniques such as fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), dynamic light scattering (DLS), UV‐vis spectroscopy, energy dispersive X‐ray analysis (EDX), thermogravimetric analysis (TGA) and vibration sample magnetometer (VSM). From the information gained by FE‐SEM and TEM studies it can be inferred that the particles are mostly spherical in shape and have an average size of 50 nm. Also, the amount of Cu is determined to be 0.51 mmol/g in the catalyst by inductively coupled plasma (ICP) analyzer. This magnetic nano‐compound has been successfully applied as a highly efficient, magnetically recoverable and stable catalyst for N‐arylation of nitrogen heterocycles with aryl halides (I, Br) and arylboronic acids without using external ligands or additives. The catalyst was also employed in a one‐pot, three‐component reaction for the efficient and green synthesis of 5‐substituted 1H‐tetrazoles using various aldehydes, hydroxylamine hydrochloride and sodium azide in water. The magnetic catalyst can be easily separated by an external magnet bar and is recycled seven times without significant loss of its activity.     

CuI/8‐Hydroxyquinalidine Promoted N‐Arylation of Indole and Azoles

An efficient catalytic system of CuI/8‐hydroxyquinalidine was developed for the coupling of aryl iodides and indole as well as some azoles. The reaction could be carried out at 90°C under the condition of relatively low catalyst loading, affording various N‐arylindoles and N‐aryl azoles in good yields. The functionalized and hindered aryl iodides were suitable substrates for this transformation.     

New Approaches to the Synthesis of 4‐(2‐Aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones and 3‐Ureidoindoles and a Study of Their Interconversion

3‐Alkyl/aryl‐3‐ureido‐1H,3H‐quinoline‐2,4‐diones ( 2 ) and 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) react in boiling concentrated HCl to give 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ). The same compounds were prepared by the same procedure from 2‐alkyl/aryl‐3‐ureido‐1H‐indoles ( 4 ), which were obtained from the reaction of 3‐alkyl/aryl‐3‐aminoquinoline‐2,4(1H,3H)‐diones ( 1 ) with 1,3‐diphenylurea or by the transformation of 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) and 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ) in boiling AcOH. The latter were converted into 1,3‐bis[2‐(2‐oxo‐2,3‐dihydro‐1H‐imidazol‐4‐yl)phenyl]ureas ( 5 ) by treatment with triphosgene. All compounds were characterized by ¹H‐ and ¹³C‐NMR and IR spectroscopy, as well as atmospheric pressure chemical‐ionisation mass spectra.     

One‐Pot Four‐Component Synthesis of N2‐Alkyl‐N3‐[2‐(1,3,4‐oxadiazol‐2‐yl)aryl]benzofuran‐2,3‐diamines

A simple synthesis of N²‐alkyl‐N³‐[2‐(1,3,4‐oxadiazol‐2‐yl)aryl]benzofuran‐2,3‐diamines 5 via a one‐pot four‐component reaction is described (Scheme 1). A mixture of N‐(isocyanoimino)triphenylphosphorane ( 1 ), a 2‐aminobenzoic acid 2 , a 2‐hydroxybenzaldehyde 3 , and an isocyanide 4 in absolute EtOH at room temperature undergoes a smooth reaction to afford 5 in excellent yields (Table).     

Catalytic Asymmetric Ring‐Opening Reactions of Aziridines with 3‐Aryl‐Oxindoles

A highly enantioselective ring‐opening alkylation reaction between 3‐aryl‐oxindole and N‐(2‐picolinoyl) aziridine has been realized for the first time. The reaction is efficiently mediated by a simple in‐situ‐generated magnesium catalyst and 3,3′‐fluorinated‐BINOL (BINOL=1,1′‐binaphthalene‐2,2′‐diol) has been identified as a powerful chiral ligand. Notably, the fluorine atom on the chiral ligand plays a key role in providing the desired chiral 3‐alkyl‐3‐aryl oxindoles with excellent enantioselectivities.     

Synthesis of N‐alkyl‐N′‐aryl or Alkenylpiperazines: A Copper‐Catalyzed C–N Cross‐Coupling in the Presence of Aryl and Alkenyl Triflates and DABCO

Unsymmetrical piperazines are key constituents of many pharmaceuticals. Given that the selective introduction of an aryl and alkyl motif onto the piperazine is not always straightforward, direct arylation and alkenylation of 1,4‐diaza‐bicyclo[2.2.2]octane would obviate the inefficiencies associated with the preparation of these target molecules. We have utilized alkyl halides, aryl or alkenyl triflates, and 1,4‐diaza‐bicyclo[2.2.2]octane for the synthesis of N‐alkyl‐N ′‐aryl or alkenylpiperazines. The optimum conditions are developed using CuCl, t‐BuOL i in NMP . Alkenyl triflates requires N ,N ′‐dimethylethylenediamine and higher temperature to afford the desired cross‐coupled product. Substrates bearing electron‐deficient and electron‐rich groups were successfully coupled under the optimum reaction conditions.     

Chiral Ammonium Betaine‐Catalyzed Highly Stereoselective Aza‐Henry Reaction of α‐Aryl Nitromethanes with Aromatic N‐Boc Imines

A highly stereoselective aza‐Henry reaction of α‐aryl nitromethanes with aromatic N‐Boc imines was established by using C₁‐symmetric chiral ammonium betaine as a bifunctional organic base catalyst. Various substituted aryl groups for both imines and nitromethanes were tolerated in the reaction, and a series of precursors for the synthesis of unsymmetrical anti‐1,2‐diaryl ethylenediamines was provided.     

Pd‐SBT@MCM‐41: As an efficient,stable and recyclable organometallic catalyst for C‐C coupling reactions and synthesis of 5‐substituted tetrazoles

A palladium S‐benzylisothiourea complex was anchored on functionalized MCM‐41 (Pd‐SBT@MCM‐41) and applied as efficient and reusable catalyst for the synthesis of 5‐substituted 1H –tetrazoles using [2 + 3] cycloaddition reaction of various organic nitriles with sodium azide (NaN₃) in poly(ethylene glycol) (PEG) as green solvent. Also this catalyst was applied as an versatile organometallic catalyst for Suzuki cross‐coupling reaction of aryl halides and phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaB(Ph)₄). This nanocatalyst was characterized by thermal gravimetric analysis (TGA), X‐ray Diffraction (XRD), scanning electron microscopy (SEM), inductively Coupled Plasma (ICP) and N₂ adsorption–desorption isotherms techniques. Recovery of the catalyst is easily achieved by centrifugation for several consecutive runs.     

An Efficient Synthesis of 14‐Aryl or Alkyl‐14H‐Dibenzo[a. j]Xanthenes Using Reusable HBF4‐SiO2 Catalyst Under Thermal and Solvent‐Free Conditions

A simple and convenient procedure for the synthesis of 14‐aryl or alkyl‐14H‐dibenzo[a. j]xanthene derivatives is described through a one‐pot condensation of β‐naphthol with various aryl or alkyl aldehydes in the presence of HBF₄‐SiO₂ as the catalyst under thermal and solvent‐free conditions.     

Immobilized copper(II) on nitrogen‐rich polymer‐entrapped Fe3O4 nanoparticles: a highly loaded and magnetically recoverable catalyst for aqueous click chemistry

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi‐layered poly(2‐dimethylaminoethyl acrylamide)‐coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one‐pot three‐component reaction of alkyl halide, sodium azide and alkyne, known as copper‐catalyzed click synthesis of 1,2,3‐triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of alkyl/benzyl/allyl bromide/chloride and alkyl/aryl terminal alkynes without isolation of azide intermediate, and good to excellent yields of products make this procedure highly economical. Copyright © 2015 John Wiley & Sons, Ltd.     

New Pyrazolyl‐Nicotinic Acids,Methyl Esters,and 1,3,4‐Oxadiazolyl‐pyrazolyl‐pyridine Tricyclic Scaffold Derivatives from 6‐Hydrazinylnicotinic Acid Hydrazide Hydrate

This paper describes an efficient approach for the synthesis of a new series of 6‐[3‐alkyl(aryl/heteroaryl)‐5‐trifluoromethyl‐1H‐pyrazol‐1‐yl]nicotinic acids (where alkyl = CH₃; aryl = Ph, 4‐OCH₃Ph, 4,4′‐BiPh; and heteroaryl = 2‐Furyl) from the hydrolysis reaction of alkyl(aryl/heteroaryl)substituted 2‐(5‐trifluoromethyl‐5‐hydroxy‐4,5‐dihydro‐1H‐pyrazol‐1‐yl)‐5‐(5‐trifluoromethyl‐5‐hydroxy‐4,5‐dihydro‐1H‐1‐carbonylpyrazol‐1‐yl)pyridines, under basic conditions and at 70–95% yields. In a subsequent step, the esterification reaction of pyrazolyl‐nicotinic acids done in thionyl chloride and methanol led to the isolation of a series of methyl 6‐[alkyl(aryl/heteroaryl)‐5‐trifluoromethyl‐1H‐pyrazol‐1‐yl] nicotinates as stable hydrochloride salts at 64–84% yields, which could be easily converted to hydrazides to give new oxadiazolyl‐pyrazolyl‐pyridine tricyclic scaffolds at good yields from a [4 + 1] cyclocondensation reaction with 1,1,1‐triethoxyethane and 1‐(triethoxymethyl)benzene as the reagent/solvent.     

Copper‐Catalyzed Cascade Cyclization Reaction of 2‐Haloaryltriazenes and Sodium Azide: Selective Synthesis of 2 H‐Benzotriazoles in Water

A new approach to the synthesis of 2 H‐benzotriazoles is described. This strategy is based on the copper‐catalyzed C?N coupling of 2‐haloaryltriazenes or 2‐haloazo compounds with sodium azide and the intramolecular addition of nitrene to N?N bonds. This approach allows the synthesis of various N‐amino‐ and N‐aryl‐2 H‐benzotriazoles in water, in good to excellent yields. The procedure is simple and the starting materials and catalyst are easily available, offering a practical and convenient synthetic route to 2‐substituted benzotriazoles.     

Lewis Acids as Mild and Effective Catalysts for the Synthesis of 3,5‐Bis[(hetero)arylidene]piperidin‐4‐ones

The aldol‐crotonic condensation reactions of N‐alkyl‐ and NH‐piperidin‐4‐one derivatives with (hetero)aromatic aldehydes promoted by Lewis acids or bases were examined. This comparative study has revealed three effective catalytic systems based on Lewis acids, i.e., LiClO₄ and MgBr₂ (in the presence of tertiary amine), and BF₃⋅Et₂O, for the synthesis of N‐alkyl‐substituted 3,5‐bis(heteroarylidene)piperidin‐4‐ones, including those bearing acid‐ or base‐labile groups both in the (hetero)aromatic groups and in the alkyl substituent at the N‐atom. The highest reaction rate was observed for LiClO₄‐mediated synthesis. Both MgBr₂‐ and LiClO₄‐mediated syntheses were inefficient in the case of NH‐piperidin‐4‐one, while BF₃⋅Et₂O provided the final compounds in high yields. This catalyst is especially advantageous as it allows simultaneous condensation and deprotection in the case of O‐protected piperidin‐4‐one.     

Copper(I) oxide nanoparticles supported on magnetic casein as a bio‐supported and magnetically recoverable catalyst for aqueous click chemistry synthesis of 1,4‐disubstituted 1,2,3‐triazoles

Copper(I) oxide nanoparticles supported on magnetic casein (Cu₂O/Casein@Fe₃O₄NPs) has been synthesized as a bio‐supported catalyst and was characterized using powder X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray and Fourier transform infrared spectroscopies, thermogravimetric analysis and inductively coupled plasma optical emission spectrometry. The catalytic activity of the synthesized catalyst was investigated in one‐pot three‐component reactions of alkyl halides, sodium azide and alkynes to prepare 1,4‐disubstituted 1,2,3‐triazoles with high yields in water. The reaction work‐up is simple and the catalyst can be magnetically separated from the reaction medium and reused in subsequent reactions.     

A New Route to N‐Aryl 2‐Alkenamides,N‐Allyl N‐Aryl 2‐Alkenamides,and N‐Aryl α,β‐Unsaturated γ‐Lactams from N‐Aryl 3‐(Phenylsulfonyl)propanamides

A series of N‐aryl 2‐alkenamides were produced efficiently by treating N‐aryl 3‐(phenylsulfonyl)‐propanamides with potassium tert‐butoxide in THF at 0°C. With out isolation, it was further treated with an additional equivalent of potassium tert‐butoxide and allyl bromide to give N‐allyl N‐aryl 2‐alkenamides in one pot in good yields. Followed by a ring‐closing metathesis reaction, these N‐allyl N‐aryl 2‐alkenamides were respectively converted into corresponding N‐aryl α,β‐unsaturated γ‐lactams in moderate yields.     

N‐Heterocyclic carbene/phosphite synergistically assisted Pd/C‐catalyzed Suzuki coupling of aryl chlorides

An N‐heterocyclic carbene and phosphite synergistically enhanced Pd/C catalyst system has been developed for Suzuki coupling of aryl chlorides and aryl boronic acids from commercially available Pd/C with sterically demanding N,N′‐bis(2,6‐diisopropylphenyl)imidazolylidene and trimethylphosphite. A remarkable increase in catalytic activity of Pd/C was observed when used along with 1 equiv. N,N′‐bis(2,6‐diisopropylphenyl)imidazolium chloride and 2 equiv. phosphite with respect to palladium in appropriate solvents that were found to play a crucial role in Pd/C‐NHC‐P(OR)₃‐catalyzed Suzuki coupling. A dramatic ortho‐substitution effect of carbonyl and nitrile groups in aryl chlorides was observed and explained by a modified quasi‐heterogeneous catalysis mechanism. The Pd/C catalyst could be easily recovered from reaction mixtures by simple filtration and only low palladium contamination was detected in the biparyl products. A practical process for the synthesis of 4‐biphenylcarbonitrile has therefore been developed using the N‐heterocyclic carbene/phosphite‐assisted Pd/C‐catalyzed Suzuki coupling. Copyright © 2013 John Wiley & Sons, Ltd.     

Hydriodic Acid‐Mediated Cyclization of α‐Substituted Secondary 2‐Ethenylbenzamides: Synthesis of 2‐Substituted 2,3‐Dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones and 3,3‐Disubstituted (E)‐1‐(Arylimino)‐1,3‐dihydroisobenzofurans

A new and facile method for the preparation of 2‐substituted 2,3‐dihydro‐3,3‐dimethyl‐1H‐isoindol‐1‐ones 3 and 3,3‐disubstituted (E)‐1‐(arylimino)‐1,3‐dihydroisobenzofurans 6 has been developed. Thus, treatment of N‐alkyl(or aryl)‐2‐(1‐methylethen‐1‐yl)benzamides 2 with concentrated hydriodic acid (HI) in MeCN at room temperature afforded 3 . Similar treatment of N‐aryl‐2‐(1‐phenylethen‐1‐yl)benzamide 5 with concentrated HI at 0° afforded 6 .