Synthesis of hetero‐telechelic polymers by self‐polyaddition of monomers containing both oxetanyl and carboxyl groups

The synthesis and self‐polyaddition of new monomers, o‐, m‐, and p‐[(3‐ethyloxetane‐3‐yl)methoxyethyl]benzoic acid (o‐EOMB, m‐EOMB, and p‐EOMB) containing both oxetanyl groups and carboxyl groups were examined. The reactions of o‐EOMB, m‐EOMB, and p‐EOMB in the presence of tetraphenylphosphonium bromide as a catalyst in o‐dichlorobenzene at 150–170 °C resulted in self‐polyaddition to give the corresponding hetero‐telechelic polymers poly(o‐EOMB), poly(m‐EOMB), and poly(p‐EOMB) with M_ns = 14,500–33,400 in satisfactory yields. The M_n of poly(o‐EOMB) decreased at higher reaction temperatures than 150 °C, unlike those of poly(m‐EOMB) and poly(p‐EOMB), possibly due to inter‐ or intraester exchange side reactions. It was also found that the thermal properties and solubilities of these polymers were supposed with the proposed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7835–7842, 2008     

Synthesis,Electrochemical, and Optical Properties of a Novel PPV/PPE Block‐Copolymer

Summary: A novel poly(p‐phenylene vinylene) (PPV)/poly(p‐phenylene ethynylene) (PPE) block‐copolymer was synthesized by a cross‐coupling polycondensation with Pd(PPh₃)₂Cl₂ and a phase‐transfer catalyst, and was confirmed by ¹H NMR and IR spectroscopy and elemental analysis. The thermal, electrochemical, and photoluminescent properties of the new copolymer have been investigated. The incorporation of triple bonds into the cyano‐substituted PPV (CN‐PPV) backbone leads to higher oxidation and reduction potentials than poly(2‐methoxy‐5‐(2‐ethylhexyloxy)‐p‐phenylene vinylene) (MEH‐PPV) and CN‐PPV, potentially making the copolymer a good electron‐transporting material for use in a light‐emitting‐diode device.

The cyclic voltammogram of the novel poly(p‐phenylene vinylene) (PPV)/poly(p‐phenylene ethynylene) (PPE) block‐copolymer synthesized here.     

Block copolyesters of poly(pentamethylene p,p′‐bibenzoate) and poly(tetramethylene adipate)

Hydroxy‐terminated poly(pentamethylene p,p′‐bibenzoate) oligomers with different molecular weights were prepared. The poly(pentamethylene p,p′‐bibenzoate) oligomers showed rather high crystallinity, and some of them exhibited a monotropic smectic phase. Block copolyesters with hard segments of poly(pentamethylene p,p′‐bibenzoate) and soft segments of poly(tetramethylene adipate) were prepared by coupling the poly(pentamethylene p,p′‐bibenzoate) oligomer and a poly(tetramethylene adipate)glycol with methylene‐4,4′‐diphenylene diisocyanate in solution. The block copolyesters were characterized by IR, ¹H NMR, differential scanning calorimetry, a polarized microscope, and X‐ray diffraction. The thermal transitions of the block copolyesters were dependent on the composition and the molecular weight of the poly(pentamethylene p,p′‐bibenzoate) oligomer used. The hard segments in the block copolyesters showed no liquid crystallinity and exhibited rather low crystallinity or were even amorphous. The molecular weight of the poly(pentamethylene p,p′‐bibenzoate) oligomer used influences the glass‐transition temperature and crystalline properties of the soft segments in the block copolyesters significantly. The effect on the glass‐transition temperature of the soft segments is described as the difference in miscibility between the hard and soft segments. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2626–2636, 2002     

Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365     

Power‐law scaling of structured poly(p‐xylylene) films deposited by oblique angle

This study describes the evolution and growth of structured polymers by oblique angle deposition of poly(p‐xylylene) (PPX) derivatives. The deposition of structured PPX polymers have been demonstrated recently, but the mechanism of growth has not been studied. Here, we provide experimental evidence for the growth of structured PPX polymers by an atomic force microscope, electron microscope, and a profilometer. Individual columns expand with respect to their heights according to a power‐law, d = ch^p, where d is the column diameter, c and p are constants, and h is the height of a column. Values of p for structured poly(chloro‐p‐xylylene), poly(trifloroacetly‐p‐xylylene‐co‐p‐xylylene), and poly(bromo‐p‐xylylene) films are estimated as 0.11 ± 0.01, 0.15 ± 0.01, and 0.18 ± 0.01, respectively. This result is different from the traditional oblique angle deposition processes of nonpolymeric materials where the surface diffusion is low. Further analysis with two‐dimensional power spectral density (PSD) method showed that the ordering of columns is quasi‐periodic. Additionally, the X‐ray and transmission electron microscope characterization of the columns revealed that the columns are semicrystalline. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 640–648, 2008     

Synthesis of a variety of star‐shaped polybenzamides via chain‐growth condensation polymerization with tetrafunctional porphyrin initiator

A variety of well‐defined tetra‐armed star‐shaped poly(N‐substituted p‐benzamide)s, including block poly(p‐benzamide)s with different N‐substituents, and poly(N‐substituted m‐benzamide)s, were synthesized by using porphyrin‐cored tetra‐functional initiator 2 under optimized polymerization conditions. The initiator 2 allowed discrimination of the target star polymer from concomitantly formed linear polymer by‐products by means of GPC with UV detection, and the polymerization conditions were easily optimized for selective synthesis of the star polybenzamides. Star‐shaped poly(p‐benzamide) with tri(ethylene glycol) monomethyl ether (TEG) side chain was selectively obtained by polymerization of phenyl 4‐{2‐[2‐(2‐methoxyethoxy)ethoxy]ethylamino}benzoate ( 1b ′) with 2 at ?10 °C in the case of [ 1b ′]₀/[ 2 ]₀ = 40 and at 0 °C in the case of [ 1b ′]₀/[ 2 ]₀ = 80. Star‐shaped poly(p‐benzamide) with 4‐(octyloxy)benzyl (OOB) substituent was obtained only when methyl 4‐[4‐(octyloxy)benzylamino]benzoate ( 1c ) was polymerized at 25 °C at [ 1c ]₀/[ 2 ]₀ = 20. On the other hand, star‐shaped poly(m‐benzamide)s with N‐butyl, N‐octyl, and N‐TEG side chains were able to be synthesized by polymerization of the corresponding meta‐substituted aminobenzoic acid alkyl ester monomers 3 at 0 °C until the ratio of [ 3 ]₀/[ 2 ]₀ reached 80. However, star‐shaped poly(m‐benzamide)s with the OOB group were contaminated with linear polymer even when the feed ratio of the monomer 3d to 2 was 20. The UV–visible spectrum of an aqueous solution of star‐shaped poly(p‐benzamide) with TEG side chain indicated that the hydrophobic porphyrin core was aggregated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel double hydrophilic block copolymers based on poly(p‐hydroxystyrene) derivatives and poly(ethylene oxide)

The synthesis of three series of double hydrophilic block copolymers (DHBCs), consisting of poly(ethylene oxide) as the neutral water soluble block and a second polyelectrolyte block of variable chemistry, is described. The synthetic scheme involves the anionic polymerization of poly(p‐tert‐butoxystyrene‐b‐ethylene oxide) (PtBOS‐PEO) amphiphilic block copolymer precursors followed by the acidic hydrolysis of the hydrophobic poly(p‐tert‐butoxystyrene) (PtBOS) block to an annealed anionic polyelectrolyte poly(p‐hydroxystyrene) (PHOS) block. The PHOS block was subsequently transformed into a high charge density annealed cationic polyelectrolyte namely poly[3,5‐bis(dimethylaminomethylene) hydroxystyrene] (NPHOS), via aminomethylation. Finally, the NPHOS block was transformed into a quenched polyelectrolyte, namely quaternized poly[3,5‐bis(dimethylaminomethylene) hydroxystyrene] (QNPHOS) block by reaction with CH₃I. The solution properties of the different series of the above block polyelectrolyte copolymers have been investigated using static, dynamic and electrophoretic light scattering, turbidimetry, and fluorescence spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5790–5799, 2007     

Synthesis of poly(p‐methoxyphenylacetylene) with the vanadium acetylacetonate‐aluminum triethyl Ziegler–Natta catalyst system: Cyclotrimers/polymer ratio analysis

Poly(p‐methoxyphenylacetylene) was obtained by the reaction of p‐methoxyphenylacetylene (MOPA) with the vanadium acetylacetonate‐aluminum triethyl V(acac)₃‐AlEt₃ homogeneous catalyst system. The crude product was always a mixture of 1,2,4‐ and 1,3,5‐tris(p‐methoxyphenyl)benzene and poly(MOPA) of low averaged molecular weight. The 1,2,4‐ and 1,3,5‐cyclotrimers versus poly(MOPA) ratio was analyzed. The poly(MOPA) obtained under different conditions, on the basis of the spectroscopic data, always shows a cis–transoidal stereo‐regular structure. Molecular mass of poly(MOPA) was determined by vapor pressure osmometry, high pressure liquid chromatography (HPLC), and gel permeation chromatography (GPC) techniques. The kinetics of the reaction has been also analyzed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5987–5997, 2005     

Poly(p‐phenylene methylene)‐based block copolymers by mechanistic transformation

The synthesis of poly(p‐phenylene methylene) (PPM)‐based block copolymers such as poly(p‐phenylene methylene)‐b‐poly(ε‐caprolactone) and poly(p‐phenylene methylene)‐b‐polytetrahydrofuran by mechanistic transformation was described. First, precursor PPM was synthesized by acid‐catalyzed polymerization of tribenzylborate at 16 °C. Then, this polymer was used as macroinitiators in either ring‐opening polymerization of ε‐caprolactone or cationic ring‐opening polymerization of tetrahydrofuran to yield respective block copolymers. The structures of the prepolymer and block copolymers were characterized by GPC and ¹H NMR investigations. The composition of block copolymers as determined by ¹H NMR and TGA analysis was found to be in very good agreement. The thermal behavior and surface morphology of the copolymers were also investigated, respectively, by differential scanning calorimetry and atomic force microscopy measurements, and the contribution of the major soft segment has been observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Theoretical Investigation on Electronic Transition of Tris(8-quinolinolate) Aluminum Grafted on Poly(p-phenylenevinylene) Units with the Localized-density-matrix Method

An unsystematic molecule PPV‐Alq₃ [3‐(4‐((E)‐2‐(8‐hydroxy‐3‐(4‐styrylstyryl)quinolin‐Alq₂‐6‐yl)vinyl)‐ styryl)‐6‐(4‐styrylstyryl)quinolin‐8‐olate‐Alq₂; q=8‐quinolinolate], which combines poly(p‐phenylenevinylene) with tris(8‐quinolinolate)aluminum, has been studied using a localized‐density‐matrix method. The absorption spectra and electronic transition properties were analyzed and compared with both intermediate neglect of the differential overlap method and the localized‐density‐matrix method. Great efforts have been made on investigating conjugated system on the absorption properties as these can be particularly important for many applications. Two different absorptions of the special molecule, tris(8‐quinolinolate)aluminum grafted on poly(p‐phenylenevinylene) units, were further discussed with density matrices. For the molecule, the first absorption peak is at 413 nm near the purple light. Two 8‐hydroxyquinolines have very slight electronic transition properties. Another absorption peak is at 237 nm. The second characteristic peak of molecule is completely different from that of the first one, which comes from contribution of 8‐hyroxyquinolines in the two different side chains. Our studies show that electronic transition properties of poly(p‐phenylenevinylene) can be effectively tuned by grafting tris(8‐quinolinolate)‐aluminum on poly(p‐phenylenevinylene) from the standpoint of transition energies, frontier molecular orbitals and density matrices.     

Synthesis and polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene with Ziegler–Natta,rhodium, and palladium complexes

The synthesis and polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene was carried out with a homogeneous vanadium acetylacetonate/aluminum triethyl catalyst system, a bis(rhodium chloride cycloocta‐1,5‐diene) complex, and a palladium/trimethylsilyl complex. In all cases, the main fraction was a polymer with a stereoregular structure. The polymerization with the vanadium catalyst gave a polymer fraction in a low yield. The polymerization of (E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene with the soluble rhodium complex gave a polymer in a high yield. The soluble palladium/chlorotrimethylsilane complex gave a polymer in a good yield. On the basis of the spectroscopic data, the poly{(E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene)} obtained, in all cases, showed a cis–transoidal stereoregular structure. The molecular mass of poly{(E)‐p‐[(p‐methoxyphenyl)‐2‐ethenyl]phenylacetylene)} was determined by the matrix‐assisted laser desorption/ionization time‐of‐flight technique. The kinetics of the reaction were analyzed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6438–6444, 2005     

Synthesis and properties of poly(p‐phenylene terephthalamide) bearing both polar and unsaturated substituents introduced via claisen rearrangement reaction

A series of novel wholly aromatic copolyamides, poly(p‐phenylene terephthalamide)‐ran‐poly[p‐phenylene 2,5‐bis(allyloxy)terephthalamide] (APPTA‐x, x (=0, 5, 25, 50, 60, 75, 90, and 100) represents the molar fraction of allyloxy containing structure unit), were prepared via low temperature solution copolycondensation of p‐phenylenediamine, terephthaloyl chloride, and 2,5‐bis(allyloxy)terephthaloyl chloride. They were converted to the target copolymers, poly(p‐phenylene terephthalamide)‐ran‐poly[p‐phenylene 2,5‐diallyl?3,6‐dihydroxyterephthalamide] (CRPPTA‐x), through Claisen rearrangement reaction, as characterized by a comprehensive analyses of NMR, FT‐IR, gel permeation chromatography, and differential scanning calorimetry. Although APPTA‐x had a poor solubility in common organic solvents, the rearranged products with high co‐unit contents, that is, CRPPTA‐60, 75, 90, and 100, were readily dissolved in m‐cresol, DMF, DMAc, DMSO, and NMP. The effect of these four polymers, used as sizing agents, on the interfacial adhesion between Kevlar fiber and epoxy resin was investigated by the contact angle method, X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and microbond tests. Compared with the naked fibers, the sized fibers displayed enhanced surface energy and roughness. The fibers sized with 0.5 wt % CRPPTA‐60 solution in NMP exhibited a maximum increase of 19% in interfacial shear strength. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2050–2059     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of poly(fluorene)‐based copolymer containing triphenylamine group

The copolymers that are composed of poly(fluorene) (PF), poly(p‐phenylene), and Poly(p‐phenylenevinylene) as backbone and a large 4′‐(N,N′‐diphenylamino)diphenyl or 4′‐(N,N′‐diphenylamino)phenyl as pendent group were synthesized by the nickel(0)‐mediated polycoupling. The composition of the obtained copolymers was confirmed by H NMR. All the copolymers possessed a high weight‐average molecular weight and good solubility in common organic solvents. As the content of triphenyl amine pendants increases, the copolymers showed increased thermal stability due to increased glass transition temperature and increased hole injection ability because of decreased onset of the oxidation potential. In the photoluminescence spectra of copolymers, poly (BDAV₃₀‐co‐DHF₇₀) and poly(BDAPV₃₀‐co‐DHF₇₀) showed efficient energy transfer. indium tin oxide/poly(styrene sulfonate)‐doped poly(3,4‐ethylene dioxythiophene)/poly (BDAV₃₀‐co‐DHF₇₀)/LiF/Al device showed maximum brightness of 2267 cd/m² and efficiency of 0.80 cd/A, with turn‐on voltage at 9.1 V. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 172–182, 2006     

Synthesis of chiral amphiphilic diblock copolymers via consecutive RAFT polymerizations and their aggregation behavior in aqueous solution

Two chiral amphiphilic diblock copolymers with different relative lengths of the hydrophobic and hydrophilic blocks, poly(6‐O‐p‐vinylbenzyl‐1,2:3,4‐Di‐O‐isopropylidene‐D ‐galactopyranose)‐b‐poly(N‐isopropylacrylamide) or poly(VBCPG)‐b‐poly(NIPAAM) and poly(20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one methacrylate)‐b‐poly(N‐isopropylacrylamide) or poly(MAC‐HPD)‐b‐poly(NIPAAM) were synthesized via consecutive reversible addition‐fragmentation chain‐transfer polymerizations of VBCPG or MAC‐HPD and NIPAAM. The chemical structures of these diblock copolymers were characterized by ¹H nuclear magnetic resonance spectroscopy. These amphiphilic diblock copolymers could self‐assemble into micelles in aqueous solution, and the morphologies of micelles were investigated by transmission electron microscopy. By comparison with the lower critical solution temperatures (LCST) of poly(NIPAAM) homopolymer in deionized water (32 °C), a higher LCST of the chiral amphiphilic diblock copolymer (poly(VBCPG)‐b‐poly(NIPAAM)) was observed and the LCST increased with the relative length of the poly(VBCPG) block in the copolymer from 35 to 47 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7690–7701, 2008     

Synthesis and characterization of fluorine‐containing PAA‐b‐PTPFCBPMA amphiphilic block copolymer

A series of perfluorocyclobutyl (PFCB) aryl ether‐based amphiphilic diblock copolymers containing hydrophilic poly(acrylic acid) (PAA) and fluorophilic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) segments were synthesized via successive atom transfer radical polymerization (ATRP). 2‐MBP‐initiated and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine‐catalyzed ATRP homopolymerization of the PFCB‐containing methacrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate, can be performed in a controlled mode as confirmed by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.38. The block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.36) were synthesized by ATRP using Br‐end‐functionalized poly(tert‐butyl acrylate) (PtBA) as macroinitiator followed by the acidolysis of hydrophobic PtBA block into hydrophilic PAA segment. The critical micelle concentrations of the amphiphilic diblock copolymers in different surroundings were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the micelles were investigated by transmission electron microscopy and dynamic laser light scattering, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Preparation of chiral polystyrene monoliths by utilizing W/O emulsion polymerization and their optical resolution ability

We synthesized two kinds of chiral polystyrene‐based monoliths, which are macroporous gel with continuous open‐celled monolith structure. Thus, two chiral styrene monomers, (–)‐p‐[dimethyl(10‐pinanyl)silyl]styrene ((–)‐PSSt) and (–)‐p‐(menthoxycarbonyl)styrene ((–)‐MtSt]), were prepared and subjected to water‐in‐oil emulsion polymerization in the presence of divinylbenzene and AIBN. The macroporous structure of the obtained monoliths was directly confirmed by SEM observation. The obtained monoliths showed an optical resolution ability. That is, in the enantioselective adsorption using trans‐stilbene oxide, poly[(–)‐PSSt] monolith and poly[(–)‐MtSt] monoliths preferentially adsorbed (S,S)‐isomer [poly[(–)‐PSSt] monolith: α^(S,S) = 1.49 (0.25 wt % acetone solution); poly[(–)‐MtSt] monolith: α^(S,S) = 1.39 (0.25 wt % toluene solution)]. Depinanylsilylation of the poly[(?)‐PSSt] monolith and removal of menthyl groups from the poly[(–)‐MtSt] monolith were achieved by acid‐catalyzed scission of the Si? C bond and base‐catalyzed hydrolysis, respectively. In addition, de‐poly[(–)‐PSSt] and de‐poly[(–)‐MtSt] showed enantioselectivity ((S,S)‐isomer preferentially absorbed) in adsorption using trans‐stilbene oxide in spite of the absence of chiral substituents in the monoliths. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2348–2357, 2005     

Preparation of amphotropic liquid crystalline poly(alkoxycarbonylphenylene)s

Poly(alkoxycarbonylphenylene)s with long alkoxy groups were prepared by dehalogenative polycondensation of alkyl dichlorobenzoates with nickel bromide/zinc/triphenylphosphine catalyst. The poly(alkoxycarbonyl‐p‐phenylene)s and poly(alkyloxycarbonyl‐m‐phenylene)s are liquid crystalline, although the latter are composed wholly of kinked repeating units. While poly(hexyloxycarbonylphenylene)s exhibit only thermotropic liquid crystalline behavior, poly(dodecyloxycarbonylphenylene)s and poly(hexadecyloxycarbonylphenylene)s show amphotropism.