Synthesis and characterization of polyamides containing octadecanedioic acid: Nylon‐2,18, nylon‐3,18, nylon‐4,18, nylon‐6,18, nylon‐8,18, nylon‐9,18, and nylon‐12,18

High‐aliphatic‐content linear nylons were produced with an 18‐carbon diacid with diamines containing both odd and even methylene segments. The resulting polymers were characterized with viscosimetric, thermal, and spectroscopic techniques. Solid‐state ¹⁵N NMR was used to determine the nylon crystalline form present. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 936–945, 2005     

A Novel Conversion of 2, 4‐Diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepines into 2, 4‐Diaryl‐3 H‐1, 5‐benzodiazepines

A novel conversion of 2, 4‐diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepins into 2, 4‐diaryl‐3 H‐1, 5‐benzodiazepines by the reaction with m‐chloroperbenzoic acid (MCPBA) was reported.     

Synthesis of (±)‐Kempa‐6,8‐dien‐3‐ol (=(2aRS,3SR,4aSR,7RS,7aSR,10bSR,10cSR)‐2,2a,3,4,4a,5,6,7,7a,8,10b,10c‐Dodecahydro‐2a,7,10,10c‐tetramethylnaphth[2,18‐cde]azulen‐3‐ol)

The synthesis of kempa‐6,8‐dien‐3β‐ol ( 4a ), as a synthetic leading model of the natural product 4b , was carried out starting from intermediate 12 , the synthetic route of which has been developed previously (Scheme 1). The conversion of 12 to the model compound 4a involved the elaboration of three structure modifications by three processes, Tasks A, B, and C (see Scheme 2). Task A was achieved by epoxy‐ring opening of 41 with Me₃SiCl (Scheme 9), and Task B being performed by oxidation at the 13‐position, followed by hydrogenation, and then epimerization (Schemes 4 and 5). The removal of the 2‐OH group from 12 (Task C) was achieved via 30b according to Scheme 6, whereby 30b was formed exclusively from 30a / 31a 1 : 1 (Scheme 7). In addition, some useful reactions from the synthetic viewpoint were developed during the course of the present experiments.     

Synthesis,solid‐state,and charge‐transport properties of conjugated polythiophene‐S,S‐dioxides

An alkylated semiconducting polymer comprising alternating bithiophene‐[all]‐S,S‐dioxide and aromatic monothiophene units in the polymer backbone was synthesized with the intent of modifying the energy gap and lowest unoccupied molecular orbital for use as a stable n‐type semiconductor. Films spun from this semiconducting polymer were characterized utilizing X‐ray scattering, near edge X‐ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and thin‐film field effect transistors to determine how oxidation of the thiophene ring systems impacts the structural and electronic properties of the polymer. The thiophene‐S,S‐dioxide polymers have lower optical and electrical band gaps than corresponding thiophene polymers. X‐ray scattering results indicate that the polymers are well ordered with the π–π stacking distances increased by 0.4 Å relative to analogous thiophene polymers. The electrical stability of these polymers is poor in transistors with a drop in the field effect mobility by approximately one order of magnitude upon addition of just 5% of the thiophene‐S,S‐dioxide unit in a copolymer with thiophene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Visible‐Light‐Driven,Tunable, Photoelectrochemical Performance of a Series of Metal‐Chelate,Dye‐Organized,Crystalline, CdS Nanoclusters

CdS nanoclusters of four different sizes were integrated with ruthenium‐complex dyes. The cluster–dye crystalline composites, [Cd₄(SPh)₁₀][Ru(bpy)₃], [Cd₈S(SPh)₁₆][Ru(bpy)₃], [Cd₈S(SPh)₁₃?Cl?(CH₃OCS₂)₂][Ru(phen)₃], [Cd₁₇S₄(SPh)₂₈][Ru(bpy)₃], and [Cd₃₂S₁₄(SPh)₄₀][Ru(phen)₃]₂ (phen=1,10‐phenanthroline and bpy=bipyridine), show intense absorption in the visible‐light region. They also exhibit size‐dependent photocurrent responses under the illumination of visible light. The photocurrent increases with increased cluster size. The dyes also have significant influence on the photocurrent generation of the composite.     

Synthesis and Structure of a 2, 8, 9‐Trioxa‐3, 5, 7‐trisila‐1‐titanaadamantane

The title compound has been prepared from [Ti(η⁵‐C₅Me₅)Cl₃] and cis‐cis‐(t‐BuSi(OH)—CH₂)₃ in hexane solution in the presence of Et₃N. The pale yellow complex was characterized by NMR and MS spectra, as well as by a crystal structure determination. The two crystallographic independent molecules in the triclinic unit cell (space group P1¯, No. 2, Z = 4) both have a nearly identical adamantane‐like TiO₃Si₃C₃ cage of approximate C_3v symmetry. The exocyclic C—C—C bond angles in the Cp‐ligand range from 123° to 129°. A quantum chemical calculation of the free molecule predicts this range to be 124° to 127°. The arrangement of the molecules in the crystal is characteristic for an offset face‐to‐face ππ stacking of the aromatic η⁵‐C₅Me₅ rings.     

Theoretical Investigations on 4, 10‐Dinitro‐2, 6,8, 12‐tetraoxa‐4, 10‐diazatetracyclo[5.5.0.05, 903, 11]dodecane

Based on the full optimized molecular geometric structure at B3LYP/cc‐pvtz method, the newly designed compound 4, 10‐dinitro‐2, 6,8, 12‐tetraoxa‐4, 10‐diazatetracyclo[5.5.0.0^{5, 9}0^{3, 11}]dodecane (TEX) was investigated. Additionally, the IR spectrum, the thermal stability, and the detonation performance were predicted. The obtained crystal structure of TEX belongs to Pbca space group and lattice parameters are Z = 8, a = 8.614 Å, b = 12.877 Å, c = 26.065 Å, ρ = 2.015 g · cm^–3. Calculation results show that TEX has better detonation properties than HMX and is a high energy density compound with better stability.     

Simultaneous determination of NG‐monomethyl‐l‐arginine,NG,NG‐dimethyl‐l‐arginine,NG,NG′‐dimethyl‐l‐arginine,and l‐arginine using monolithic silica disk‐packed spin columns and a monolithic silica column

We have developed and validated a high‐performance liquid chromatography method that uses monolithic silica disk‐packed spin columns and a monolithic silica column for the simultaneous determination of N^G‐monomethyl‐l ‐arginine, N^G,N^G‐dimethyl‐l ‐arginine, and N^G,N^G′‐dimethyl‐l ‐arginine in human plasma. For solid‐phase extraction, our method employs a centrifugal spin column packed with monolithic silica bonded to propyl benzenesulfonic acid as a cation exchanger. After pretreatment, the methylated arginines are converted to fluorescent derivatives with 4‐fluoro‐7‐nitro‐2,1,3‐benzoxadiazole, and then the derivatives are separated on a monolithic silica column. l ‐Arginine concentration was also determined in diluted samples. Standard calibration curves revealed that the assay was linear in the concentration range 0.2–1.0 μM for methylated arginines and 40–200 μM for l ‐arginine. Linear regression of the calibration curve yielded equations with correlation coefficients of 0.999 (r²). The sensitivity was satisfactory, with a limit of detection ranging from 3.75 to 9.0 fmol for all four compounds. The RSDs were 4.3–4.8% (intraday) and 3.0–6.8% (interday). When this method was applied to samples from six healthy donors, the detected concentrations of N^G‐monomethyl‐l ‐arginine, N^G,N^G‐dimethyl‐l ‐arginine, N^G,N^G′‐dimethyl‐l ‐arginine and l ‐arginine were 0.05 ± 0.01, 0.41 ± 0.07, 0.59 ± 0.11, and 83.8 ± 30.43 μM (n = 6), respectively.     

High‐Performance,Stretchable, Wire‐Shaped Supercapacitors

A general approach toward extremely stretchable and highly conductive electrodes was developed. The method involves wrapping a continuous carbon nanotube (CNT) thin film around pre‐stretched elastic wires, from which high‐performance, stretchable wire‐shaped supercapacitors were fabricated. The supercapacitors were made by twisting two such CNT‐wrapped elastic wires, pre‐coated with poly(vinyl alcohol)/H₃PO₄ hydrogel, as the electrolyte and separator. The resultant wire‐shaped supercapacitors exhibited an extremely high elasticity of up to 350 % strain with a high device capacitance up to 30.7 F g⁻¹, which is two times that of the state‐of‐the‐art stretchable supercapacitor under only 100 % strain. The wire‐shaped structure facilitated the integration of multiple supercapacitors into a single wire device to meet specific energy and power needs for various potential applications. These supercapacitors can be repeatedly stretched from 0 to 200 % strain for hundreds of cycles with no change in performance, thus outperforming all the reported state‐of‐the‐art stretchable electronics.     

2, 4‐Dimethylpenta‐1, 3‐dien‐ und 2, 4‐Dimethylpentadienyl‐Komplexe des Rhodiums und Iridiums

2, 4‐Dimethylpenta‐1, 3‐diene and 2, 4‐Dimethylpentadienyl Complexes of Rhodium and Iridium The complexes [(η⁴‐C₇H₁₂)RhCl]₂ ( 1 ) (C₇H₁₂ = 2, 4‐dimethylpenta‐1, 3‐diene) and [(η⁴‐C₇H₁₂)₂IrCl] ( 2 ) were obtained by interaction of C₇H₁₂ with [(η²‐C₂H₄)₂RhCl]₂ and [(η²‐cyclooctene)₂IrCl]₂, respectively. The reaction of 1 or 2 with CpTl (Cp = η⁵‐C₅H₅) yields the compounds [CpM(η⁴‐C₇H₁₂)] ( 3a : M = Rh; 3b : M = Ir). The hydride abstraction at the pentadiene ligand of 3a , b with Ph₃CBF₄ proceeds differently depending on the solvent. In acetone or THF the “half‐open” metallocenium complexes [CpM(η⁵‐C₇H₁₁)]BF₄ ( 4a : M = Rh; 4b : M = Ir) are obtained exclusively. In dichloromethane mixtures are produced which additionally contain the species [(η⁵‐C₇H₁₁)M(η⁵‐C₅H₄CPh₃)]BF₄ ( 5a : M = Rh; 5b : M = Ir) formed by electrophilic substitution at the Cp ring, as well as the η³‐2, 4‐dimethylpentenyl compound [(η³‐C₇H₁₃)Rh{η⁵‐C₅H₃(CPh₃)₂}]BF₄ ( 6 ). By interaction of 2, 4‐dimethylpentadienyl potassium with 1 or 2 the complexes [(η⁴‐C₇H₁₂)M(η⁵‐C₇H₁₁)] ( 7a : M = Rh; 7b : M = Ir) are generated which show dynamic behaviour in solution; however, attempts to synthesize the “open” metallocenium cations [(η⁵‐C₇H₁₁)₂M]⁺ by hydride abstraction from 7a , b failed. The new compounds were characterized by elemental analysis and spectroscopically, 4b and 5a also by X‐ray structure analysis.     

High‐Performance,Stretchable, Wire‐Shaped Supercapacitors

A general approach toward extremely stretchable and highly conductive electrodes was developed. The method involves wrapping a continuous carbon nanotube (CNT) thin film around pre‐stretched elastic wires, from which high‐performance, stretchable wire‐shaped supercapacitors were fabricated. The supercapacitors were made by twisting two such CNT‐wrapped elastic wires, pre‐coated with poly(vinyl alcohol)/H₃PO₄ hydrogel, as the electrolyte and separator. The resultant wire‐shaped supercapacitors exhibited an extremely high elasticity of up to 350 % strain with a high device capacitance up to 30.7 F g^?1, which is two times that of the state‐of‐the‐art stretchable supercapacitor under only 100 % strain. The wire‐shaped structure facilitated the integration of multiple supercapacitors into a single wire device to meet specific energy and power needs for various potential applications. These supercapacitors can be repeatedly stretched from 0 to 200 % strain for hundreds of cycles with no change in performance, thus outperforming all the reported state‐of‐the‐art stretchable electronics.     

Synthesis, Structure and Biological Activities of S-[α-（ 4-Methoxyphenylcarbonyl ）-2-（1,2,4-triazole-l-yl） ethyl-N, N-dime-thyldithiocarbamate

The title compound was prepared by reaction of N, N‐dimethyldithiocarbamate sodium with l‐bromo‐l‐(4‐methoxyphenylcarbonyl)‐2‐(1, 2, 4‐triazole‐l‐yl) ethane. Its crystal structure has been determined by X‐ray diffraction analysis. The crystal belongs to triclinic with space group Pī, a = 0.7339(2) nm, b = 1.1032(2) nm, c = 1.1203(2) nm, a = 90.27(3)°, β = 102.03(3)°, γ = 104.91(3)°, Z=2, V = 0.8556(3) nm³, D_c = 1.360 g/cm³, μ =0.325 mm^?1, F(000)=368, final R₁ =0.0475. The planes of 4‐methoxybenzyl group and triazole ring are nearly perpendicular to each other. The dihedral angle is 83.97°. There is an obvious π‐π stacking interaction between the molecules in the crystal lattice. The results of biological test show that the title compound has fungicidal and plant growth regulating activities.     

(4aR,8aS,9aR,10aS)‐8a,9a‐Difluoro‐1,4,4a,5,8,8a,9,9a,10,10a‐decahydroanthracene‐4a,10a‐diol hemihydrate

The title compound, C₁₄H₁₈F₂O₂·0.5H₂O, a hemihydrate of a C_s‐symmetric unsaturated difluorodiol, crystallizes in the centrosymmetric space group P2/m (Z = 4). The asymmetric unit contains two crystallographically independent difluorodiol half‐molecules, occupying the mirror planes at (x, 0, z) and (x, , z), and half a molecule of water, lying on the twofold axis at (0, y, 0). Four difluorodiol molecules self‐assemble around each solvent water molecule via O—H...O hydrogen bonds in a near tetrahedral symmetry to generate a cylindrical column‐like architecture.     

Brominated Trihalomethylenones as Versatile Precursors to 3‐Ethoxy, ‐Formyl, ‐Azidomethyl, ‐Triazolyl,and 3‐Aminomethyl Pyrazoles

5‐Bromo[5,5‐dibromo]‐1,1,1‐trihalo‐4‐methoxy‐3‐penten[hexen]‐2‐ones are explored as precursors to the synthesis of 3‐ethoxymethyl‐5‐trifluoromethyl‐1H‐pyrazoles from a cyclocondensation reaction with hydrazine monohydrate in ethanol. 3‐Ethoxymethyl‐carboxyethyl ester pyrazoles were formed as a result of a substitution reaction of bromine and chlorine by ethanol. The dibrominated precursor furnished 3‐acetal‐pyrazole that was easily hydrolyzed to formyl group. In addition, brominated precursors were used in a nucleophilic substitution reaction with sodium azide to synthesize the 3‐azidomethyl‐5‐ethoxycarbonyl‐1H‐pyrazole from the reaction with hydrazine monohydrate. These products were submitted to a cycloaddition reaction with phenyl acetylene furnishing the 3‐[4(5)‐phenyl‐1,2,3‐triazolyl]5‐ ethoxycarbonyl‐1H‐pyrazoles and to reduction conditions resulting in 3‐aminomethyl‐1H‐pyrazole‐5‐carboxyethyl ester. The products were obtained by a simple methodology and in moderate to good yields.     

Design,Synthesis, Characterization,and Antimicrobial Evaluation of Novel 2‐(3, 5‐di methoxy‐4‐((1‐aryl‐1H‐1, 2, 3‐triazole‐4‐yl) methoxy) phenyl) benzo[d]thiazoles

A series of 12 new 2‐(3, 5‐dimethoxy‐4‐((1‐Aryl‐4H‐1, 2, 3‐triazol‐4‐yl) methoxy) phenyl) benzo[d]thiazoles have been synthesized from the reaction of 4‐hydroxy‐3, 5‐dimethoxybenzaldehyde, o‐amino thiophenol, propargyl bromide, and different substituted aromatic azides using “click chemistry”. The structures of these compounds were established on the basis of Fourier Transform infrared, ¹H NMR, ¹³C–NMR, and mass spectral analysis. Compounds ( 6a–l ) were screened for in vitro antimicrobial activity.