Stability of some aryllithiums in the presence of cyano group: synthesis of biaromatic cyanoarylboronic acids and silanes

Lithium diisopropylamine (LDA)‐mediated deprotonation reactions of halogenated cyanobenzyloxy‐benzenes and cyanobiphenyls were investigated. The resultant organolithium derivatives were converted into the corresponding arylboronic acids or silanes. It was found that the stability of the obtained aryllithiums towards isomerization to the respective benzyllithiums depends strongly on the number of fluorine atoms in the phenyl ring and on the position of the cyano group. Halogenated cyanobiaryls were selectively deprotonated in the position flanked by two halogen atoms; however, the yield depended strongly on the reaction conditions. Addition of LDA to the cyano group was observed on the lithiation of 4‐cyano‐3′,5′‐dichlorobiphenyl rather than deprotonation. Copyright © 2012 John Wiley & Sons, Ltd.     

Polymerizable anthracene derivatives for labeling emulsion copolymers

We describe the synthesis of three anthracene–methacrylate monomers [9‐methacryloxymethyl‐10‐methyl anthracene ( 4 ), 9‐methacryloxyethyloxymethyl‐10‐methyl anthracene ( 5 ), and 9‐methacryloxy‐10‐methyl anthracene ( 6 )] as well as their emulsion copolymers containing butylacrylate. When films prepared from latex dispersions containing 4 or 5 were heated, the anthracene (An) group was cleaved from the polymer at temperatures above 120 °C. Lower temperatures induced this reaction when strong acids were present. In 4 and 5 , the polymerizable group is connected to the An ring via a 9‐CH₂O? linkage. The cleavage reaction requires more stringent conditions when the connection involves a benzylic ether ( 5 ) instead of a benzylic ester. Polymers prepared from 6 , with an An? O? bond, were stable for 1 h at 150 °C in the presence of 0.5 wt % p‐toluene sulfonic acid. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1495–1504, 2001     

Regioselective lithiation of 1‐benzylpyrazole derivatives: Synthesis of amides derived from pyrazole

A series of brominated 1‐benzylpyrazoles were deprotonated at the pyrazole 5‐position or the benzylic position on treatment with lithium diisopropylamide in tetrahydrofuran at low temperature. The obtained organolithium intermediates were subjected to reaction with Me₃SiCl, t‐BuNCO, ClCONEt₂ or ClCON(i‐Pr)₂ affording the respective silanes or amides after hydrolysis.     

Reduction of Thiocarbonyl Compounds with Lithium Diisopropylamide

Treatment of 4,4‐disubstituted 2‐phenyl‐1,3‐thiazole‐5(4H)‐thiones with lithium diisopropylamide (LDA; LiNⁱPr₂) in THF at ?78° yielded the corresponding 1,3‐thiazole‐5(4H)‐thioles in moderate yields. Sequential treatment with LDA and MeI under the same conditions led to the 5‐methylsulfanyl derivatives. Similarly, reaction of some cycloalkanethiones as well as diaryl thioketones with LDA and MeI gave cycloalkyl methyl sulfides and diarylmethyl methyl sulfides, respectively. A reaction mechanism via H transfer from LDA to the thiocarbonyl C‐atom via a six‐membered transition state is proposed for this unprecedented reduction of the C?S bond.     

Intramolecular photoreactions of thiohomophthalimides with an alkenyl group in their N‐Side chain. Regioselective synthesis of heterocycle‐fused isoquinoline derivatives through [2+2] photocycloaddition

Upon irradiation, thiohomophthalimides with an alkenyl group in their N‐side chain or at the benzylic position give tricyclic isoquinoline derivatives through regioselective intramolecular [2+2] cycloaddition or Norrish type II reaction, respectively, in good yields.     

Catalytic oxidative reactions of organic compounds by nitrogen‐containing copper complexes

The dimeric copper(II) complex di‐µ‐chloro‐bis[chloro(di‐3,5‐dimethylpyrazole)copper(II)] (A) in the presence of co‐oxidant hydrogen peroxide acts as a catalyst for the oxidation of benzylic alcohols to give the corresponding aldehydes. In the presence of hydrogen peroxide it also catalyses the oxidation reaction of 2,6‐dimethylphenol to 4,4′‐dihydroxy‐3,5,3′,5′‐tetramethylbiphenyl. The oxidative reactions by bis‐pyridinium tetrachlorocopper(II) (B) in the presence of hydrogen peroxide were compared for similar catalytic reactions of A, and it is observed that B can catalyse the oxidation of aromatic diols, 2,6‐dimethylphenol and thiophenol, but is not suitable for oxidation of benzylic alcohols. Bis‐(N‐phenyl‐3,5‐dimethylpyrazole)copper(II) nitrate monohydrate (C) has a suitable redox potential for one‐electron oxidation. It can oxidize ferrocene to the ferricinium cation, and it can liberate bromine from tetra‐alkylammonium bromides. The complex is catalytically effective for the oxidation of different aromatic and aliphatic aldehydes to the corresponding carboxylic acids. The compound is also effective in transforming benzylic amine to benzylalcohol and benzaldehyde. It can also oxidize diphenylmethane to give benzophenone and diphenylmethanol. It is observed that in each of these complexes a quasi‐reversible Cu(I)–Cu(II) species is present and facilitates the single‐electron oxidation process. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of Highly Substituted γ‐Butyrolactones by a Gold‐Catalyzed Cascade Reaction of Benzyl Esters

Easily accessible benzylic esters of 3‐butynoic acids in a gold‐catalyzed cyclization/rearrangement cascade reaction provided 3‐propargyl γ‐butyrolactones with the alkene and the carbonyl group not being conjugated. Crossover experiments showed that the formation of the new C?C bond is an intermolecular process. Initially propargylic–benzylic esters were used, but alkyl‐substituted benzylic esters worked equally well. In the case of the propargylic–benzylic products, a simple treatment of the products with aluminum oxide initiated a twofold tautomerization to the allenyl‐substituted γ‐butyrolactones with conjugation of the carbonyl group, the olefin, and the allene. The synthetic sequence can be conducted stepwise or as a one‐pot cascade reaction with similar yields. Even in the presence of the gold catalyst the new allene remains intact.     

Sequential One‐Pot Addition of Excess Aryl‐Grignard Reagents and Electrophiles to O‐Alkyl Thioformates

The sequential addition of aromatic Grignard reagents to O‐alkyl thioformates proceeded to completion within 30 s to give aryl benzylic sulfanes in good yields. This reaction may begin with the nucleophilic attack of the Grignard reagent onto the carbon atom of the O‐alkyl thioformates, followed by the elimination of ROMgBr to generate aromatic thioaldehydes, which then react with a second molecule of the Grignard reagent at the sulfur atom to form arylsulfanyl benzylic Grignard reagents. To confirm the generation of aromatic thioaldehydes, the reaction between O‐alkyl thioformates and phenyl Grignard reagent was carried out in the presence of cyclopentadiene. As a result, hetero‐Diels–Alder adducts of the thioaldehyde and the diene were formed. The treatment of a mixture of the thioformate and phenyl Grignard reagent with iodine gave 1,2‐bis(phenylsulfanyl)‐1,2‐diphenyl ethane as a product, which indicated the formation of arylsulfanyl benzylic Grignard reagents in the reaction mixture. When electrophiles were added to the Grignard reagents that were generated in situ, four‐component coupling products, that is, O‐alkyl thioformates, two molecules of Grignard reagents, and electrophiles, were obtained in moderate‐to‐good yields. The use of silyl chloride or allylic bromides gave the adducts within 5 min, whereas the reaction with benzylic halides required more than 30 min. The addition to carbonyl compounds was complete within 1 min and the use of lithium bromide as an additive enhanced the yields of the four‐component coupling products. Finally, oxiranes and imines also participated in the coupling reaction.     

An unexpected transformation of benzyl carbamates into α-azidobenzeneacetamides

Successive treatment of benzyl carbamates 5 (Z-protected secondary amines) with lithium diisopropylamide (LDA), diphenyl phosphorochloridate (DPPC1), and NaN 3 yielded the corresponding ã-azidobenzeneacetamides 6 in 45–50% yield (Schemes 2 and 3). In the case of Z-protected diisopropylamine 5b , the phosphate 7 was isolated as a minor product. A reaction mechanism for this unexpected transformation is proposed in Scheme 4, the key step being the ring closure of a benzylic anion to give an oxirane intermediate B. In cursory experiments, it was demonstrated that ã-azidobenzeneacetamides 6 can be used as 2-phenylglycine synthons in the formation of dipeptides by using a phosphine-mediated coupling (Scheme 5).     

Light/Palladium‐Promoted Benzylic C−H Acylation Using a Benzoyl Group as the Photo‐Directing Group

2‐Methylphenyl ketones undergo site‐selective acylation at the benzylic position when treated with acid anhydride under UV irradiation in the presence of a palladium catalyst. The benzoyl carbonyl group serves as the photo‐directing group so that the ortho benzylic C?H bond is activated site‐selectively.     

New Chiral N,S—Ligands with Thiophenyl at Benzylic Position.Palladium（Ⅱ）—catalyzed Enantioselective Allylic Alkylation

New chiral N,S-ligands with oxazoline and thiophenyl sub-stituents at benzene ring and benzylic postition have been pre-pared and applied in palladium-catalyzed asymmetric allylic alkylation reaction to provide the product with high yield and entantioselectivity (82%-93%)ee.     

Redox Amination Scope of Benzylic Ketones with Indoline: Synthetic and Mechanistic Insights

Bi(NO₃)₃·5H₂O‐Catalyzed redox amination scope and mechanistic insights of benzylic ketones with indoline are discussed. The experimental results demonstrate that the formation of N‐alkyl‐substituted indole/indoline derivatives over typically competitive redox and reductive amination processes is depending upon the reaction condition for the benzylic ketones.     

Direct synthesis of γ‐substituted phthalides via ortho‐aryl benzoic acid mediated benzyl radical cyclization

Direct synthesis of γ‐substituted phthalids from related ortho‐aryl benzoic acids with 48–85% yield are covered. The direct oxidation in the presence of peroxydisulphate‐copper (II) chloride in aqueous medium was applied. The reaction is highly regioselective and leads exclusively to γ‐butyrolactone, through very stable benzylic radical intermediate.     

Palladium‐catalysed Suzuki cross‐coupling of primary alkylboronic acids with alkenyl halides

The Suzuki reaction of primary alkylboronic acids with alkenyl halides proceeds nicely using the air‐stable catalyst PdCl(C₃H₅)(dppb), Cs₂CO₃ as base and toluene or xylene as solvent. A minor effect of the substituent position of the alkenyl bromide was observed. Quite similar yields were observed in the presence of α‐ or β‐substituted alkenyl bromides such as 2‐bromobut‐1‐ene or 1‐bromo‐2‐methylprop‐1‐ene with this catalyst. This reaction proceeded with a variety of alkylboronic acids such as 2‐phenylethylboronic acid or n‐octylboronic acid. Lower yields of coupling products were obtained in the presence of an alkenyl chloride. Copyright © 2008 John Wiley & Sons, Ltd.     

Fluorescent oligo(N‐phenylmaleimide)s via aerobic radical telomerization initiated by benzylic hydrocarbons: Catalytic effect of CoII/N‐hydroxyphthalimide pair

Radical oligomerization of N‐phenylmaleimide (NPMI) was performed in benzylic hydrocarbons as the solvent. The thermally induced oligomerization occurred only above 130 °C, with the initiation attributed to autoxidation of benzylic hydrocarbons as well as formation and dissociation of charge‐transfer complexes between benzylic hydrocarbons and maleimides. The end‐group analysis on oligo(N‐ethylmaleimide) prepared under similar conditions confirmed that the chain transfer to benzylic hydrocarbons was the primary fashion in forming oligomeric chains, and radical telomerization underlaid the oligomerization with benzylic hydrocarbons as both the solvent, the initiator and the telogen. Co^II/N‐hydroxyphthalimide (NHPI) pairs could catalyze the telomerization at 110 °C. In such a catalytic process, Co^II‐based oxidative complexes oxidized benzylic hydrocarbons and NHPI into benzylic radicals and phthalimide N‐oxyl (PINO), and benzylic hydrocarbons underwent hydrogen atom transfer (HAT) to PINO. Oligo(NPMI)s were formed via HAT with benzylic hydrocarbons and NHPI. These oligo(NPMI)s exhibited fluorescent properties with excitation at 270–350 nm and 400–550 nm and emission at 530–750 nm. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3846–3857     

Evaluation of Fe and Ru Pincer‐Type Complexes as Catalysts for the Racemization of Secondary Benzylic Alcohols

Fe and Ru pincer‐type catalysts are used for the racemization of benzylic alcohols. Racemization with the Fe catalyst was achieved within 30 minutes under mild reaction conditions, with a catalyst loading as low as 2 mol %. This reaction constitutes the first example of an iron‐catalyzed racemization of an alcohol. The efficiency for racemization of the Fe catalyst and its Ru analogue was evaluated for a wide range of sec‐benzylic alcohols. The commercially available Ru complex proved to be highly robust and even tolerated the presence of water in the reaction mixture.     

Microwave‐Assisted Oxidation of Alcohols with N,N,N′,N′‐Tetrabromobenzene‐1,3‐Disulfonamide and Poly(N‐Bromobenzene‐1,3‐Disulfonamide) under Solvent‐Free Conditions

An efficient and mild methodology for the oxidation of primary and secondary alcohols to the corresponding carbonyl functions is described with N,N,N′,N′‐tetrabromobenzene‐1,3‐disulfonamide and poly(N‐bromobenzene‐1,3‐disulfonamide) using microwave irradiation under solvent‐free conditions. Aliphatic, benzylic and allylic alcohols are rapidly oxidized without over‐oxidation to carboxylic acids. Secondary carbinols are slowly oxidized so that the reaction is highly chemoselective.     

Ligand effects in the formation of tertiary carbanions from substituted tertiary aromatic amides

Reaction of 2‐isopropyl‐(N,N‐diisopropyl)‐benzamide 5 with tBuLi in ether results in ortho deprotonation and the formation of a hemisolvate based on a tetranuclear dimer of ( 5 ‐Li_o)₂?Et₂O. The solid‐state structure exhibits a dimer core in which the amide oxygen atoms fail to stabilize the metal ions but are instead available for interaction with two metalated monomers that reside peripheral to the core. Reaction of 5 with tBuLi in the presence of the tridentate Lewis base PMDTA (N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine) takes a different course. In spite of the tertiary aliphatic group at the 2‐position in 5 , X‐ray crystallography revealed that a remarkable benzylic (lateral) deprotonation had occurred, giving the tertiary benzyllithium 5 ‐Li_l?PMDTA. The solid‐state structure reveals that amide coordination and solvation by PMDTA combine to distance the Li⁺ ion from the deprotonated α‐C of the 2‐iPr group (3.859(4) Å), thus giving an essentially flat tertiary carbanion and a highly distorted aromatic system. DFT analysis suggests that the metal ion resides closer to the carbanion center in solution. In line with this, the same (benzylic) deprotonation is noted if the reaction is attempted in the presence of tridentate diglyme, with X‐ray crystallography revealing that the metal is now closer to the tertiary carbanion (2.497(4) Å). Electrophilic quenches of lithiated 5 have allowed, for the first time, the formation of quaternary benzylic substituents by lateral lithiation.     

Synthesis of novel amphiphilic pyridinylboronic acids

Novel 3‐alkoxy‐2‐pyridinylboronic acids bearing, in their 3‐position, linear alkoxy or perfluoroalkoxy chains with n carbon atoms (n = 6, 8, 10, 12 and 18) 2a – 2g are synthesized from 2‐bromo‐3‐pyridinol, which is the common starting product. Our alternative procedure for the synthesis of 3‐alkoxy‐2‐bromopyridine in a phase‐transfer catalysis system is to carry out the reaction in a solid–liquid medium in the presence of a quaternary ammonium salt under microwave irradiation. General and versatile synthetic methods have been developed for preparation of a large variety of new 2‐pyridinylboronic acids bearing two alkylated or perfluoroalkylated side chains with an ether junction in the 3‐position. Copyright © 2003 John Wiley & Sons, Ltd.     

A Biomimetic Pathway for Vanadium‐Catalyzed Aerobic Oxidation of Alcohols: Evidence for a Base‐Assisted Dehydrogenation Mechanism

The first step in the catalytic oxidation of alcohols by molecular O₂, mediated by homogeneous vanadium(V) complexes [LV^V(O)(OR)], is ligand exchange. The unusual mechanism of the subsequent intramolecular oxidation of benzyl alcoholate ligands in the 8‐hydroxyquinolinato (HQ) complexes [(HQ)₂V^V(O)(OCH₂C₆H₄‐p‐X)] involves intermolecular deprotonation. In the presence of triethylamine, complex 3 (X=H) reacts within an hour at room temperature to generate, quantitatively, [(HQ)₂V^IV(O)], benzaldehyde (0.5 equivalents), and benzyl alcohol (0.5 equivalents). The base plays a key role in the reaction: in its absence, less than 12 % conversion was observed after 72 hours. The reaction is first order in both 3 and NEt₃, with activation parameters ΔH^≠=(28±4) kJ mol^?1 and ΔS^≠=(?169±4) J K^?1 mol^?1. A large kinetic isotope effect, 10.2±0.6, was observed when the benzylic hydrogen atoms were replaced by deuterium atoms. The effect of the para substituent of the benzyl alcoholate ligand on the reaction rate was investigated using a Hammett plot, which was constructed using σ_p. From the slope of the Hammett plot, ρ=+(1.34±0.18), a significant buildup of negative charge on the benzylic carbon atom in the transition state is inferred. These experimental findings, in combination with computational studies, support an unusual bimolecular pathway for the intramolecular redox reaction, in which the rate‐limiting step is deprotonation at the benzylic position. This mechanism, that is, base‐assisted dehydrogenation (BAD), represents a biomimetic pathway for transition‐metal‐mediated alcohol oxidations, differing from the previously identified hydride‐transfer and radical pathways. It suggests a new way to enhance the activity and selectivity of vanadium catalysts in a wide range of redox reactions, through control of the outer coordination sphere.