Rapid,highly efficient and chemoselective trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by reusable electron‐deficient tin(IV)porphyrin

In this paper, rapid and highly efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) in the presence of catalytic amounts of high‐valent [Sn^IV(TPP)(OTf)₂] is reported. This catalytic system catalyzes trimethylsilylation of primary, secondary and tertiary alcohols as well as phenols, and the corresponding TMS‐ethers were obtained in high yields and short reaction times at room temperature. It is noteworthy that this method can be used for chemoselective silylation of primary alcohols in the presence of secondary and tertiary alcohols and phenols. The catalyst was reused several times without loss of its catalytic activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Graphene oxide‐bound electron‐deficient tin(IV) porphyrin: a highly efficient and selective catalyst for trimethylsilylation of alcohols and phenols with hexamethyldisilazane

The catalytic activity of graphene oxide‐bound tetrakis(p ‐aminophenyl)porphyrinatotin(IV) trifluoromethanesulfonate, [Sn^IV(TNH₂PP)(OTf)₂], in the trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) is reported. The prepared catalyst was characterized using inductively coupled plasma analysis, scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared and diffuse reflectance UV–visible spectroscopies. This heterogeneous catalyst was used for selective trimethylsilylation of various alcohols and phenols with HMDS in short reaction times and high yields. Also, the catalyst is of high reusability and stability, in that it was recovered several times without loss of its initial activity. The chemoselectivity of this catalytic system in the silylation of primary alcohols in the presence of secondary and tertiary alcohols and also phenols was investigated.     

Selective tetrahydropyranylation of alcohols and phenols using titanium(IV) salophen trifluoromethanesulfonate as an efficient catalyst

Titanium(IV) salophen trifluoromethanesulfonate, [Ti^IV(salophen)(OSO₂CF₃)₂], as a catalyst enables selective tetrahydropyranylation of alcohols and phenols with 3,4‐dihydro‐2H‐pyran. Using this catalytic system, primary, secondary and tertiary alcohols, as well as phenols, were converted to their corresponding tetrahydropyranyl ethers in high yields and short reaction times at room temperature. Investigation of the chemoselectivity of this method showed discrimination between the activity of primary alcohols in the presence of secondary and tertiary alcohols and phenols. This heterogenized catalyst could be reused several times without loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Highly efficient and chemoselective trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by reusable electron-deficient [Ti(salophen)(OTf)2]

In the present work, highly efficient trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) catalyzed by high-valent [Ti^IV(salophen)(OTf)₂] is reported. Under these conditions, primary, secondary and tertiary alcohols as well as phenols were silylated in short reaction times and high yields. It is noteworthy that this method can be used for chemoselective silylation of primary alcohols in the presence of secondary and tertiary alcohols and phenols. The catalyst was reused several times without loss of its catalytic activity.     

One‐Pot Alkoxylation of Phenols with Urea and 1,2‐Glycols

A one‐pot epoxide‐free alkoxylation process has been developed for phenolic compounds. The process involves heating phenols and urea in 1,2‐glycols at 170‐190 °C using Na₂CO₃/ZnO as co‐catalysts under atmospheric conditions. During the course of this new alkoxylation reaction, a five‐membered ring cyclic carbonate intermediate, ethylene carbonate (EC) or propylene carbonate (PPC), was produced in‐transit as the key intermediate and was subsequently consumed by phenols to form alkoxylated ether alcohols as final products in excellent yields. For instance, phenol, bisphenol A (BPA), hydroquinone and resorcinol were converted into their respective mono‐alkoxylated ether alcohols on each of their phenolic groups in 80‐95% isolated yields. In propoxylation of phenols, this approach shows great product selectivity favoring production of high secondary alcohols over primary alcohols in isomeric ratios of nearing 95/5. Since ammonia (NH₃) and carbon dioxide (CO₂) evolving from the reaction can be re‐combined in theory into urea for re‐use, the overall net‐alkoxylation by this approach can be regarded as a simple condensation reaction of phenols with 1,2‐glycols giving off water as its by‐product. This one‐pot process is simple, safe and environmentally friendlier than the conventional alkoxylated processes based on ethylene oxide (EO) or propylene oxide (PO). Moreover, this process is particularly well‐suited for making short chain‐length alkoxyether alcohols of phenols.     

Silver(I)‐Catalyzed Addition of Phenols to Alkyne Cobalt Cluster Stabilized Carbocations

A smooth catalytic method to use phenols as the nucleophilic partner in the Nicholas reaction has been developed. The method uses either Ag^I or Au^I catalysts with AgClO₄ or AgBF₄ as the most efficient catalysts tested. Neither additional additives nor cocatalysts were required and the formation of the corresponding phenol adducts occurred in excellent yields. The process has the single limitation of the inability of less nucleophilic phenols (4‐nitrophenol) to generate the corresponding adducts. Additionally, the reaction is highly diastereoselective. DFT calculations allow a catalytic cycle to be proposed that involves trimetallic intermediates; the rate‐determining step of the reaction is hydroxy‐group elimination in a cobalt–silver trimetallic intermediate.     

Novel N‐Alkylbenzimidazole‐Ruthenium (II) complexes: Synthesis and catalytic activity of N‐alkylating reaction under solvent‐free medium

In this article, direct N‐alkylation reactions of amines with alcohols derivatives have been investigated. For this purpose, a new series ruthenium (II) complexes bearing N‐coordinated benzimidazole complexes with have been synthesized and fully characterized by elemental analysis, FT‐IR, ¹H NMR and, ¹³C NMR spectroscopies. Additionally, the structures of the complexes 2b and 2c have been confirmed by X‐ray crystallography. Although the N‐alkylating reaction is usually performed in toluene, the catalytic study of complexes 2a‐d has carried out no additional solvent and alcohol acted both as solvent and reactant of alkylating by using a little excess of alcohols. Surprisingly, conversion and selectivity of amine product for alkylation reaction have been seen high in medium solvent‐free relative to in toluene.     

Atom transfer radical polymerization of methyl methacrylate by copper(I)‐pyridine‐2‐carboximidate catalysts

Pyridine‐2‐carboximidates [methyl ( 1a ), ethyl ( 1b ), isopropyl ( 1c ), cyclopentyl ( 1d ), cyclohexyl ( 1e ), n‐octyl ( 1f ), and benzyl ( 1g )] were prepared from the reaction of 2‐cyanopyridine with the corresponding alcohols. Cyclopentyl‐substituted 1d was found to be a highly effective ligand for copper‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). For example, the observed rate constant for a CuBr/ 1d catalytic system was found to be nearly twice as high as the cyclohexyl‐substituted CuBr/ 1e catalytic system [k_obs = (1.19 vs 0.56) × 10^?4 s^?1). The effects of the solvents, temperature, catalyst/initiator, and solvent/monomer ratio on the ATRP of MMA were studied systematically for the CuBr/ 1d catalytic system. The optimum condition for the ATRP of MMA was found to be a 1:2:1:400 [CuBr]_o/[ 1d ]_o/[ethyl 2‐bromoisobutyrate]_o/[MMA]_o ratio at 60 °C in veratrole solution, which yielded well‐defined poly(MMA) with a narrow molecular weight distribution of 1.14. The catalytically active copper complex 2d was isolated from the reaction of CuBr with 1d . Narrow molecular weight distributions as low as 1.06 were achieved for the CuBr/ 1d catalytic system by employing 10% of the deactivator CuBr₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2747–2755, 2004     

Electron‐deficient vanadium(IV) tetraphenylporphyrin: A new,highly efficient and reusable catalyst for chemoselective trimethylsilylation of alcohols and phenols with hexamethyldisilazane

In the present work, the application of electron‐deficient tetraphenylporphyrinatovanadium(IV) trifluoromethanesulfonate, [V^IV(TPP)(OTf)₂], in the trimethylsilylation of alcohols and phenols with hexamethydisilazane (HMDS) is reported. This new V(IV) catalyst was used as an efficient catalyst for silylation of not only primary alcohols but also sterically hindered secondary and tertiary alcohols with HMDS. Trimethylsilylation of phenols with HMDS was also performed to afford the desired Trimethylsilyl ethers (TMS) ethers. The chemoselectivity of this method was also investigated. This catalyst can be reused several times without loss of its activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Chlorozincate(II) acidic ionic liquid: Efficient and biodegradable silylation catalyst

A practical and highly efficient silylation of alcohol and phenol derivatives with hexamethyldisilazane (HMDS) using acidic ionic liquids under mild reaction conditions is described. A series of Brønsted as well as Brønsted–Lewis acidic ionic liquids were prepared and their performance investigated for the silylation of a wide variety of alcohols and phenols with HMDS. Imidazole‐ as well as N ‐methyl‐2‐pyrrolidone‐based acidic ionic liquids have a higher catalytic activity for the protection of sensitive, hindered alcohols and phenols, thus providing an environmentally begin and versatile alternative to current acid catalysts. In addition, the acidic ionic liquids are reusable, being recovered easily and reused several times without significant deterioration in catalytic activity.     

Stereoselective Synthesis of (Z)‐4‐(2‐Bromovinyl)benzene‐sulfonyl Azide and Its Synthetic Utility for the Transformation to (Z)‐N‐[4‐(2‐Bromovinyl)benzenesulfonyl]imidates

A novel method for the stereoselective synthesis of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide by simultaneous azidation and debrominative decarboxylation of anti‐2,3‐dibromo‐3‐(4‐chlorosulfonylphenyl)propanoic acid using NaN₃ only was developed. Facile transformation of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide to (Z)‐N‐[4‐ (2‐bromovinyl)benzenesulfonyl]imidates was also achieved by Cu‐catalyzed three‐component coulping of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide, terminal alkynes and alcohols/phenols.     

2‐(1H‐Benzotriazole‐1‐yl)‐1,1,3,3‐Tetramethyluronium Tetrafluoro Borate (TBTU) as an Efficient Coupling Reagent for the Esterification of Carboxylic acids with Alcohols and Phenols at Room Temperature

Esterification of carboxylic acids with alcohols and phenols by using 2‐(1H‐benzotriazole‐1‐yl)‐1,1,3,3‐tetramethyluronium tetrafluoroborate (TBTU) in the presence of triethylamine as a base proceeded smoothly under mild conditions to afford the corresponding esters in good to high yields in acetonitrile at room temperature.     

A Noble‐Metal‐Free Metal–Organic Framework (MOF) Catalyst for the Highly Efficient Conversion of CO2 with Propargylic Alcohols

Cyclization of propargylic alcohols with CO₂ is an important reaction in industry, and noble‐metal catalysts are often employed to ensure the high product yields under environmentally friendly conditions. Herein a porous noble‐metal‐free framework 1 with large 1D channels of 1.66 nm diameter was synthesized for this reaction. Compound 1 exhibits excellent acid/base stability, and is even stable in corrosive triethylamine for one month. Catalytic studies indicate that 1 is an effective catalyst for the cyclization of propargylic alcohols and CO₂ without any solvents under mild conditions, and the turnover number (TON) can reach to a record value of 14 400. Furthermore, this MOF catalyst also has rarely seen catalytic activity when the biological macromolecule ethisterone was used as a substrate. Mechanistic studies reveal that the synergistic catalytic effect between Cu^I and In^III plays a key role in the conversion of CO₂.     

Selective Silylation of Alcohols,Phenols and Oximes Using N‐Chlorosaccharin as an Efficient Catalyst under Mild and Solvent‐Free Conditions

Efficient silylation of OH group in alcohols, phenols and oximes is described using a catalytic amount of N‐chlorosaccharin and hexamethyldisilazane (HMDS) under mild and solvent‐free conditions. This silylation reaction can be carried out with excellent and interesting various selectivities.     

Polystyrene‐Gallium Trichloride Complex: A Mild,Highly Efficient,and Recyclable Polymeric Lewis Acid Catalyst for Chemoselective Silylation of Alcohols and Phenols with Hexamethyldisilazane

Polystyrene‐supported gallium trichloride (PS/GaCl₃) as a highly active and reusable heterogeneous Lewis acid effectively activates hexamethyldisilazane (HMDS) for the efficient silylation of alcohols and phenols at room temperature. In this heterogeneous catalytic system, primary, secondary, and tertiary alcohols as well as phenols were converted to their corresponding trimethylsilyl ethers with short reaction times and high yields under mild reaction conditions. The heterogenized catalyst is of high reusability and stability in the silylation reactions and was recovered several times with negligible loss in its activity or a negligible catalyst leaching, and also there is no need for regeneration. It is noteworthy that this method can be used for chemoselective silylation of different alcohols and phenols with high yields.     

Highly efficient protection of alcohols and phenols catalysed by tin porphyrin supported on MIL‐101

The catalytic activity of 5,10,15,20‐tetrakis(4‐aminophenyl)porphyrinatotin(IV) trifluoromethanesulfonate, [Sn^IV(TNH₂PP)(OTf)₂], supported on chloromethylated MIL‐101, was investigated in the trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) and also their tetrahydropyranylation with 3,4‐dihydro‐2H‐pyran. Excellent yields, mild reaction conditions, short reaction times and reusability of the catalyst without significant decrease in its initial activity are noteworthy advantages of this supported catalyst. Copyright © 2015 John Wiley & Sons, Ltd.     

From the N‐Heterocyclic Carbene‐Catalyzed Conjugate Addition of Alcohols to the Controlled Polymerization of (Meth)acrylates

Among various N‐heterocyclic carbenes (NHCs) tested, only 1,3‐bis(tert‐butyl)imidazol‐2‐ylidene (NHC^tBu) proved to selectively promote the catalytic conjugate addition of alcohols onto (meth)acrylate substrates. This rather rare example of NHC‐catalyzed 1,4‐addition of alcohols was investigated as a simple means to trigger the polymerization of both methyl methacrylate and methyl acrylate (MMA and MA, respectively). Well‐defined α‐alkoxy poly(methyl (meth)acrylate) (PM(M)A) chains, the molar masses of which could be controlled by the initial [(meth)acrylate]₀/[ROH]₀ molar ratio, were ultimately obtained in N,N‐dimethylformamide at 25 °C. A hydroxyl‐terminated poly(ethylene oxide) (PEO‐OH) macro‐initiator was also employed to directly access PEO‐b‐PMMA amphiphilic block copolymers. Investigations into the reaction mechanism by DFT calculations revealed the occurrence of two competitive concerted pathways, involving either the activation of the alcohol or that of the monomer by NHC^tBu.     

Highly efficient tetrahydropyranylation of alcohols and phenols catalyzed by a new and reusable high-valent vanadium(IV) porphyrin

In the present work, the catalytic activity of high-valent tetraphenylporphyrinatovanadium(IV) trifluoromethanesulfonate, [V^IV(TPP)(OTf)₂], in the tetrahydropyranylation of alcohols and phenols with 3,4-dihydro-2H-pyran (DHP) is reported. This new electron-deficient V(IV) compound was used as a highly efficient catalyst for pyranylation of primary (aliphatic and benzylic), sterically-hindered secondary and tertiary alcohols with DHP. Tetrahydropyranylation of phenols with DHP was also performed to afford the desired THP-ethers. The chemoselectivity of this method was also investigated. The results indicated that primary alcohols are more reactive in the presence of secondary and tertiary alcohols and phenols. This catalyst was reused several times without loss of its activity.     

A poly (4‐vinylpridine‐co‐ethylene glycol dimethacrylate) monolithic concentrator for in‐line concentration‐capillary electrophoresis analysis of phenols in water samples

A poly(4‐vinylpridine‐co‐ethylene glycol dimethacrylate) monolith was synthesized in a capillary and constructed as a concentrator for the in‐line polymeric monolith microextraction coupling with capillary electrophoresis. The integrated system was then used for the simultaneous determination of five trace phenols (2‐nitrophenol, 3‐nitrophenol, 4‐nitrophenol, 2‐chlorophenol, and 2,4‐dichlorophenol) in water samples. The experimental parameters for in‐line solid‐phase extraction, such as composition and volume of the elution plug, pH of sample solution, and the time for sample loading were optimized. The sensitivity for the mixture of phenols (2‐nitrophenol, 3‐nitrophenol, 4‐nitrophenol, 2‐chlorophenol, and 2,4‐dichlorophenol) enhanced to 615–2222 folds at the optimum condition was compared to the sensitivity for a normal hydrodynamic injection in capillary electrophoresis. Linearity ranged from concentration of 10–500 ng mL^?1(R² > 0.999) for all five phenols with the detection limits of 1.3–3.3 ng mL^?1. In tap, snow and Yangtze River water spiked with 20 ng mL^?1 and 200 ng mL^?1, respectively, the recoveries of 84–105% were obtained. It has been demonstrated that this work has great potential for the analysis of phenols in genuine water samples.     

Half‐sandwich Ru (II) complexes containing (N,O) Schiff base ligands: Catalysts for base‐free transfer hydrogenation of ketones

Two new half‐sandwich Ru (II)(p‐cymene) complexes ( 1 and 2 ) containing dopamine‐based (N, O) Schiff base ligands ( L ¹ H and L ² H ) were synthesized and characterized by FT‐IR, UV–Visible and ¹H & ¹³C NMR spectral techniques, and elemental analyses. The spectroscopic and analytical data revealed monobasic bidentate coordination of the ligands with Ru ion. The molecular structures of L ¹ H , L ² H and 2 were further confirmed by single crystal X‐ray diffraction study. Complexes 1 and 2  have been employed as catalysts in the transfer hydrogenation of ketones using 2‐propanol as a hydrogen source at 85 °C under base‐free condition. Good to the excellent yield of secondary alcohols, gram scale synthesis, and high TON and TOF made this catalytic system interesting.