氯代硝基二苯醚的多溴代反应

研究了氯代硝基二苯醚的多溴代反应，制备了5种新的氯溴混合卤代硝基二苯醚化合物，其结构经元素分析，IR和^1H NMR确证。     

6-溴(氯)-2-氯甲基-3-喹啉甲酸乙酯的合成方法研究

以邻硝基苯甲醛为起始原料,经还原和氨基保护合成2-乙酰胺基苯甲醛(1)。应用环境友好的聚乙二醇-400为溶剂,以N-卤代丁二酰亚胺为卤代试剂对化合物2-乙酰胺基苯甲醛(1)进行卤代,制备了5-溴(氯)-2-乙酰胺基苯甲醛(2a,2b)。在三甲基氯硅烷(TMSCl)催化作用下,5-溴(氯)-2-乙酰胺基苯甲醛(2a,2b)与4-氯乙酰乙酸乙酯发生Friedlnder缩合反应,合成目标产物6-溴(氯)-2-氯甲基-3-喹啉甲酸乙酯(3a,3b)。其中2a,2b,3a,3b的结构经IR、1H NMR、13C NMR、MS得以确定。     

脱氢松香酸甲酯类衍生物的合成

以脱氢松香酸甲酯为原料, 经溴代、硝化、还原、重氮化等步骤合成了6种12位取代的脱氢松香酸甲酯衍生物, 研究了12位上不同取代基对它们紫外、荧光性质的影响; 然后再分别以得到的12-氯脱氢松香酸甲酯和12-溴脱氢松香酸甲酯为起始物, 经双硝化、氧化、脱异丙基硝化等步骤合成了一系列重要的脱氢松香酸甲酯卤代硝化衍生物, 并对12-氯脱氢松香酸甲酯、12-溴-13,14-二硝基脱氢松香酸甲酯的单晶进行了X射线衍射表征.     

饮用水消毒溴代副产物及其健康风险

受海水入侵影响严重的沿海地区,其饮用水源中常含有较高浓度的溴离子.研究表明,当原水中含有溴离子时,经氯化消毒、氯胺消毒或臭氧消毒后会增加溴代消毒副产物的形成,并且溴代副产物具有更高的遗传毒性.因此,对于溴代副产物的研究更具实际意义.现阶段国内对于消毒所产生的溴代副产物的研究很少.本文针对溴代副产物更高的健康风险,从其产生的原因、机理、影响因素及遗传毒性等方面进行了综述.     

新型阿那曲唑衍生物的合成

以3,5-二溴甲苯为原料,经钯催化剂催化插羰成酯、格氏反应、氯代、氰化、溴代、N-烷基化六步反应合成了阿那曲唑(总收率55.2%)。保留阿那曲唑苯环的对称部分,对其进行结构修饰,合成了13个新型的阿那曲唑衍生物,其结构经1H NMR,IR和MS表征。     

二乙酸碘苯促进芳基酮烯醇硅醚的氯化反应

利用三甲基氯硅烷作为氯源,在二乙酸碘苯促进下,以芳基酮衍生的烯醇硅醚作为底物,合成了一系列α-氯代芳基酮.该方法反应条件温和,以中等至较好收率得到氯代芳基酮.若使用三甲基溴硅烷作为溴源,该方法还能用来制备α-溴代芳基酮.     

新型四齿膦配体在钯催化的Suzuki偶联反应中的应用

由廉价易得的1,2-环己二胺作为起始原料,通过简单的合成步骤制备了一种新型的四齿膦配体1,并将该配体应用于钯催化的Suzuki交叉偶联反应中.在仅为0.1 mol%的催化剂用量下,成功地实现了多种氯/溴代芳烃、氯/溴代杂环芳烃以及溴代烷烃底物与苯硼酸的交叉偶联反应,产率最高可达99%.     

取代邻羟基苯乙酮的简便绿色合成

以对甲(氯、溴)苯酚(1a-c)为起始原料经酰化得对甲(氯、溴)苯酚乙酯,再以BF3·2HAc为催化剂无溶剂条件下实现Fries重排,以77.3%-80.4%的收率分别得到了5-甲基(氯、溴)邻羟基苯乙酮(2a-c);应用环境友好的聚乙二醇-400为溶剂,N-氯(溴、碘)代丁二酰亚胺为卤代试剂对邻羟基苯乙酮进行卤代反应,以61.8%-92.4%的收率制备3,5-二氯(溴、碘)邻羟基苯乙酮(4a-c);以邻羟基苯乙酮为原料,硝酸铈铵(CAN)为绿色硝化试剂,分别以29.8%和63.9%的收率得到了3位和5位硝化产物1-(2-羟基-3-硝基苯基)乙酮、1-(2-羟基-5-硝基苯基)乙酮(5a-b)。以上制备过程具有反应条件温和、后处理简单、环境友好等优点,为制备取代邻羟基苯乙酮提供了简单且绿色的新方法。     

红景天苷的全合成

以对羟基苯甲醛为原料,经酚羟基保护、醛基还原、氯代、氰化、水解、酯化和还原反应制得关键中间体4-苄氧基苯乙醇(6);6与溴代四乙酰基葡萄糖偶联后脱保护基合成了红景天苷,总收率12.8%,其结构经1H NMR,13C NMR,IR和HR-MS确证。     

新型氯苯基卟啉-5-氟尿嘧啶的合成

以3,4-二氯苯甲醛、对羟基苯甲醛,吡咯和1,5-二溴戊烷(或1,6-二溴己烷)为原料,经两步反应合成了溴烷氧基氯苯基卟啉(2a或2b);2与5-氟尿嘧啶反应,合成了两种新型的氯代苯基卟啉-5-氟尿嘧啶[1a(产率28.26%)和1b(产率29.34%)],其结构经UV-Vis,~1H NMR,IR和MS表征.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.