Surface stress, kinetics, and structure of alkanethiol self-assembled monolayers

The surface stress induced during the formation of alkanethiol self-assembled monolayers (SAMs) on gold from the vapor phase was measured using a micromechanical cantilever-based chemical sensor. Simultaneous in situ thickness measurements were carried out using ellipsometry. Ex situ scanning tunneling microscopy was performed in air to ascertain the final monolayer structure. The evolution of the surface stress induced during coverage-dependent structural phase transitions reveals features not apparent in average ellipsometric thickness measurements. These results show that both the kinetics of SAM formation and the resulting SAM structure are strongly influenced both by the surface structure of the underlying gold substrate and by the impingement rate of the alkanethiol onto the gold surface. In particular, the adsorption onto gold surfaces having large, flat grains produces high-quality self-assembled monolayers. An induced compressive surface stress of 15.9 +/- 0.6 N/m results when a c(4x2) dodecanethiol SAM forms on gold. However, the SAMs formed on small-grained gold are incomplete and an induced surface stress of only 0.51 +/- 0.02 N/m results. The progression to a fully formed SAM whose alkyl chains adopt a vertical (standing-up) orientation is clearly inhibited in the case of a small-grained gold substrate and is promoted in the case of a large-grained gold substrate.     

Coverage-dependent adsorption geometry of octithiophene on Au(111)

The adsorption behavior of α-octithiophene (8T) on the Au(111) surface as a function of 8T coverage has been studied with low-temperature scanning tunneling microscopy, high resolution electron energy loss spectroscopy as well as with angle-resolved two-photon photoemission and ultraviolet photoemission spectroscopy. In the sub-monolayer regime 8T adopts a flat-lying adsorption geometry. Upon reaching the monolayer coverage the orientation of 8T molecules changes towards a tilted configuration, with the long molecular axis parallel to the surface plane, facilitating attractive intermolecular π-π-interactions. The photoemission intensity from the highest occupied molecular orbitals (HOMO and HOMO - 1) possesses a strong dependence on the adsorption geometry due to the direction of the involved transition dipole moment for the respective photoemission process. The change in molecular orientation as a function of coverage in the first molecular layer mirrors the delicate balance between intermolecular and molecule/substrate interactions. Fine tuning of these interactions opens up the possibility to control the molecular structure and accordingly the desirable functionality.     

自组装DNA吸附取向的表面增强拉曼光谱法研究

对金基体上自组装寡聚核苷酸探针杂交前后进行电化学非现场及现场表面增强拉曼光谱(SERS)研究.非现场SERS研究表明,杂交形成的dsDNA在基体表面以A型和B型两种构象同时存在,杂交过程可能伴随DNA链在基体表面吸附取向的变化.根据现场SERS研究结果可知,ssDNA及dsDNA的大多数SERS谱带强度随电极电位正移而降低,尤其是归属于碱基A的两种面外振动模式,谱带变化更为明显.利用SERS表面选择定则判断出随着电极电位由负向正变化,ssDNA及dsDNA螺旋吸附取向由垂直吸附向平躺吸附于金基体表面变化.     

Surface-Confined Metallodendrimers: Isolated Nanosize Molecules

The incorporation of dialkyl sulfide side chains in metallodendrimers is a simple method for their insertion into a monolayer of decanethiol formed by self-assembly on a gold surface. The dendrimer binds through the sulfide group to a defect in the monolayer on the gold surface (see picture). The surface concentration of the isolated dendrimer adsorbate can be regulated by the adsorption time (for example, 55 adsorbates on a surface of 200×200 nm² after 20 h).     

Electrochemical oxidative formation of ordered monolayers of thiol molecules on Au(111) surface

Electrochemical oxidative formation of thiolate monolayers on a Au(111) surface in KOH ethanol solutions of various thiol concentrations is described. The formation process was investigated by electrochemistry, in situ scanning tunneling microscopy (STM), and surface X‐ray diffraction (SXRD). The reductive charge in the linear sweep voltammogram after keeping the potential at +0.1 V increased with holding time and reached the saturated value of 103 µC cm^?2, corresponding to the full monolayer coverage of the ( ) structure. The desorption peak shifted negatively with holding time even after the monolayer was formed, suggesting that ordering of the monolayer requires a much longer time than full coverage adsorption. The herringbone structure, corresponding to the ( × 23) structure, was observed on the Au(111) surface in KOH ethanol solution by in situ STM, which shows that a clean surface was exposed. When hexanethiol ethanol solution was added into the ethanol solution at ?450 mV so that the final thiol concentration was higher than ca. 5 µM, generation of vacancy islands (VIs) was observed, which shows the potentiostatic monolayer formation. When the potential was scanned positively from ?950 mV where a clean reconstructed Au(111) surface was exposed, generation of VIs was observed accompanied by anodic current flow. During both oxidative adsorption and reductive desorption of the monolayer, the shape of the steps of the gold surface changed drastically, which suggests that the gold atoms on the surface are extremely mobile during the monolayer formation. SXRD measurement confirmed the surface reconstruction lifting upon monolayer formation. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 199–209; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200900002     

Probing protein adsorption onto mercaptoundecanoic acid stabilized gold nanoparticles and surfaces by quartz crystal microbalance and zeta-potential measurements

The adsorption characteristics of three proteins [bovine serum albumin (BSA), myoglobin (Mb), and cytochrome c (CytC)] onto self-assembled monolayers of mercaptoundecanoic acid (MUA) on both gold nanoparticles (AuNP) and gold surfaces (Au) are described. The combination of quartz crystal microbalance measurements with dissipation (QCM-D) and pH titrations of the zeta-potential provide information on layer structure, surface coverage, and potential. All three proteins formed adsorption layers consisting of an irreversibly adsorbed fraction and a reversibly adsorbed fraction. BSA showed the highest affinity for the MUA/Au, forming an irreversibly adsorbed rigid monolayer with a side-down orientation and packing close to that expected in the jamming limit. In addition, BSA showed a large change in the adsorbed mass due to reversibly bound protein. The data indicate that the irreversibly adsorbed fraction of CytC is a monolayer structure, whereas the irreversibly adsorbed Mb is present in form of a bilayer. The observation of stable BSA complexes on MUA/AuNPs at the isoelectric point by zeta-potential measurements demonstrates that BSA can sterically stabilize MUA/AuNP. On the other hand, MUA/AuNP coated with either Mb or CytC formed a reversible flocculated state at the isoelectric point. The colloidal stability differences may be correlated with weaker binding in the reversibly bound overlayer in the case of Mb and CytC as compared to BSA.     

喹啉衍生物自组装单分子膜的制备与结构

由于自组装单分子膜（SeifAssewhledMonolnyer,SAM）技术提供了在分子水平上构造理想界面的方便手段,而且所得到的膜具有优于传统m膜的均一性与稳定性,所以近年来SAM成为研究的热点．大量的研究工作表明SAM在润滑、防腐、催化老u蚀、电子转移反应研究、分子器件、非线性光学等众多领域都有广泛的应用前景［‘］．在以前的工作中我们曾报导了含酸胺键［’］、偶氮苯基团”,‘］等链内取代基的SAM的电化学与红外研究的结果,并采用化学力显微镜（CF）技术对末端为竣基的SAM进行了力滴定研究l’1．由于受合成等因素的制约,目前国…     

Adsorption of 1,4-Benzenedithiol on Gold and Silver Surfaces: Surface-Enhanced Raman Scattering Study

The adsorption behavior of 1,4-benzenedithiol (1,4-BDT) on colloidal gold and silver surfaces has been investigated by means of surface-enhanced Raman scattering (SERS). 1,4-BDT chemisorbed dissociatively on both gold and silver surfaces but as mono- and dithiolate, respectively. Regardless of the bulk concentration of 1,4-BDT, only a monolayer was assembled on the silver surface with a flat orientation by forming two Ag–S bonds. On the gold surface, the monothiolate species,1,4-BDT⁻¹, appeared to assume a rather flat orientation at a very low surface coverage, but as the surface coverage was increased, the adsorbate took a perpendicular orientation. Furthermore, when the bulk concentration of 1,4-BDT was close to that required for a full-monolayer coverage limit, a band assignable to the S–S stretching vibration appeared at 536 cm⁻¹ in the gold sol SERS spectra. A separate ellipsometry measurement performed with vacuum-evaporated gold substrates revealed that up to tetralayers could be assembled on gold in 1 mM n-hexane solution of 1,4-BDT while at best a bilayer formed in either methanol or ethanol solution. The different adsorbate structure of 1,4-BDT on gold and silver was overall quite comparable to that of p-xylene-α,α′-dithiol.     

In situ monitoring of the orientated assembly of strep-tagged membrane proteins on the gold surface by surface enhanced infrared absorption spectroscopy

Surface enhanced infrared absorption spectroscopy (SEIRAS) has been employed to monitor the orientated assembly of a strep-tagged membrane protein on the gold surface via a streptavidin/biotin interlayer. The high surface sensitivity of SEIRAS allows for tracking the individual assembling steps on the molecular level. The sequence of surface modification steps comprises: (i) cross-linking of biotin to the self-assembled monolayer of cysteamine along the gold surface; (ii) adsorption of streptavidin to and desorption from the biotin layer; and (iii) adsorption of the strep-tagged membrane protein ecgltP (glutamate transporter of E. coli) on the streptavidin/biotin layer. The analysis of the SEIRA spectra reveals that the biotin layer undergoes a phase transition from an isotropic orientation to a densely packed layer during coupling to the cysteamine monolayer. Formation of the densely packed layer weakens the interaction between streptavidin and the biotin layer but yields a binding specificity of 80%. The specificity of strep-tagged ecgltP to the streptavidin layer is with 60% only modest. Nevertheless, the streptavidin/biotin interlayer reveals a higher regeneration propensity than the His-tag/Ni-NTA interlayer.     

Orientation modulation of a synthetic polypeptide in self-assembled monolayers: a TOF-SIMS study

Structure and orientation of molecules are key properties of functionalized surfaces. Using time-of-flight secondary ion mass spectrometry (TOF-SIMS), here we investigate how to modulate these parameters upon the immobilization process varying the conditions of self-assembly. The molecule of interest, a template-assembled synthetic protein (TASP), consists of a central peptide ring with orthogonally arranged residues. Thioalkane chains allow the directed self-assembly of the molecule on a gold surface; four serine residues on the opposite side of the ring can be used as anchoring sites for various functional sensing molecules. The TASP conformation and its orientation in self-assembled monolayers (SAMs) play a central role for the accessibility of these serine residues. To study the influence of the self-assembly conditions, two series of samples were prepared. Pure TASP monolayers of different surface densities are compared to mixed TASP/alkanethiol monolayers prepared by sequential adsorption varying sequence and particular incubation times as well as by coadsorption modifying incubation times and TASP/alkanethiol mass ratios. Switching the TASP orientation from a state where the molecules are lying flat on the surface to an upright orientation turned out to be possible by inserting the TASP into a preformed alkanethiol monolayer of an appropriate surface density. This study demonstrates that TOF-SIMS is an excellent tool not only to investigate the surface composition, but also the molecular structure of functionalized surfaces.     

Adsorption of dodecyltrimethylammonium bromide and sodium bromide on gold studied by liquid chromatography and flow adsorption microcalorimetry

Here, we report on a new aspect of the adsorption of Br- on the surface of gold. The adsorption of dodecyltrimethylammonium bromide (C12TABr) from aqueous solutions onto macroporous gold particles was studied by continuous flow frontal analysis solid/liquid chromatography and flow adsorption microcalorimetry. The material balance and enthalpy balance of adsorption and the change in the solution pH were measured simultaneously. Initially, Br- is irreversibly bound to high-affinity surface sites counterbalanced by the adsorption of H+ from the aqueous phase. The surface speciation is accompanied by the formation of C12TAOH, which in turn results in a significant pH increase in the bulk solution. The net process was found to be strongly exothermic (-280 kJ.mol(-1)), which is indicative of the occurrence of chemisorption. The specific adsorption of Br- is followed by the reversible adsorption of C12TABr to produce a firmly bound monolayer in a head-to-surface arrangement (-53 kJ.mol(-1)). In a relatively narrow range of the surface coverage, various composite structures may develop on the top layer and eventually transform to full-cylindrical surface aggregates. The surface aggregation was found to be reversible, with an enthalpy change of -11 kJ.mol(-1). The importance of the specific binding of Br- to the surface of gold was confirmed by measurement of the initial adsorption of NaBr on the microparticles. The initial adsorption was found to be irreversible, with an enthalpy change of approximately -240 kJ.mol(-1). This process involved the formation of an AuBr-/H+ electric double layer at the gold/water interface, accompanied by a dramatic increase in the solution pH due to the release of a copious amount of OH- in the bulk liquid phase.     

Studies of Adsorption Kinetics and Defects of Self‐Assembled Thiol Monolayers on Gold by Capacitance Plane Plot

The capacitive property of an electrode/electrolyte interface can be described by complex capacitance. The capacitance plane plots (CPPs) of ideal polarized and kinetic controlled electrodes are derived based on the concept of complex capacitance. By using CPPs, the capacitance of electrode/electrolyte interface can be conveniently determined. In this work, CPPs obtained in ac impedance experiments are employed for the first time in studying the kinetics of adsorption process of the thiol monolayer. The coverage of octadecanethiol (ODT) monolayer on gold is examined as a function of adsorption time. The adsorption process of ODT molecules on gold exhibits two distinct phases: an initial rapid step followed by a slow one. The simple Langmuir model best explains our experimental data in the initial adsorption stage. CPPs and cyclic voltammetry (CV) indicate that, in the initial adsorption step, the ODT monolayer contains defects whose number decreases with the increasing of adsorption time.     

Adsorption behaviors of poly(amido amine) dendrimers with an azacrown core and long alkyl chain spacers on solid substrates

Adsorption behaviors of functional poly(amido amine) dendrimers with an azacrown core and long alkyl chain spacers were investigated on gold and self-assembled monolayer (SAM) by means of time course attenuated total reflection-surface enhanced infrared absorption and surface plasmon resonance spectroscopies. While 1.5th and 2.5th generation (G1.5 and G2.5) ester-terminated dendrimers were slightly adsorbed on all substrates examined, the adsorption of G2 amine-terminated dendrimer increased in the order dodecanethiol SAM相似文献   

Comparative electrochemical study of self-assembly of octanethiol from aqueous and aqueous ethanol solutions on a gold electrode

The self-assembly of octanethiol (OT) on the surface of a polycrystalline gold electrode in aqueous and aqueous ethanol thiol-containing (1 × 10^–4 М) 0.1 М NaClO₄ solutions was studied. The blocking properties and electrochemical stability of monolayer OT films were studied by chronopotentiometry during OT adsorption under the open circuit conditions (chronoamperometry at a fixed potential) combined with cyclic voltammetry for modified Au/OT electrodes. It was found from the change in the rate of electrochemical reactions in the range of monolayer stability potentials that in aqueous media, compact insulating OT monolayer films formed at a open circuit potential within ~100 s, and the shift of the adsorption potential toward negative values (to–0.6 V) allowed a considerable decrease in the monolayer self-assembly time. The potential shift toward higher negative values (–0.9 V) leads to a removal of OT from the electrode surface during the reductive desorption, with a multipeak current signal recorded on the voltammograms. A transition from aqueous to aqueous ethanol solutions accelerated the formation of an insulating OT monolayer (≈6 s) and led to a change in the shape of the desorption current peak, whose value was almost independent of the ОТ accumulation time and potential.     

Immobilization of the nanoparticle monolayer onto self-assembled monolayers by combined sterically enhanced hydrophobic and electrophoretic forces

The immobilization of surface-derivatized gold nanoparticles onto methyl-terminated self-assembled monolayers (SAMs) on gold surface was achieved by the cooperation of hydrophobic and electrophoretic forces. Electrochemical and scanning probe microscopy techniques were utilized to explore the influence of the SAM's structure and properties of the nanoparticle/SAM/gold system. SAMs prepared from 1-decanethiol (DT) and 2-mercapto-3-n-octylthiophene (MOT) were used as hydrophobic substrates. The DT SAM is a closely packed and organized monolayer, which can effectively block the underlying gold and inhibit a variety of solution species including organic and inorganic molecules from penetrating, whereas the MOT monolayer is poorly packed or disorganized (because of a large difference in dimension between the thiophene head and the alkylchain tail) and permeable to many organic probes in aqueous solution but not to inorganic probes. Thus, the MOT monolayer provides a more energetically favorable hydrophobic surface for the penetration and adsorption of organic species than the DT monolayer. This hypothesis is supported by experiments in which the density of hydrophobically immobilized nanoparticles on the MOT SAM is much larger than that on the DT SAM. The results also suggest new approaches for modification of macroscopic surfaces with nanoscopic particles.     

表面增强拉曼光谱研究基于轴向配位键结合的金属卟啉自组装膜

选择一种金属卟啉有机物(5-对-烷氧基苯基-10,15,20-三苯基卟啉羟基稀土化合物, HoOH)和4,4'-联吡啶(44BPY)作为自组装膜的基本构筑单元, 利用金属配位作用, 成功地将HoOH单分子膜组装到44BPY修饰的银表面. 采用紫外-可见吸收光谱、表面增强拉曼光谱研究了金属卟啉自组装膜的形成并且探索其结构和取向的变化. 结果表明, 底层的44BPY通过4位的N原子垂直吸附到银表面, 另一端的吡啶环上的N原子与HoOH的金属中心配位形成化学键. 从而在44BPY长轴向方向上将HoOH连接到44BPY自组装膜上, 并形成了新的交替膜. 之后, 底层的44BPY取向发生变化, 更向基底倾斜, 而上层的HoOH的分子平面则近乎平行于基底.     

Electrochemical quartz crystal microbalance study of azurin adsorption onto an alkanethiol self-assembled monolayer on gold

A quartz crystal microbalance coupled with electrochemistry was used to examine the adsorption of azurin on a gold electrode modified with a self-assembled monolayer of octanethiol. Azurin adsorbed irreversibly to form a densely packed monolayer. The rate of azurin adsorption was related to the bulk concentration of azurin in solution within the concentration range studied. At a high azurin concentration (2.75 muM), adsorption was rapid with a stable adsorption maximum attained in 2-3 min. At a lower azurin solution concentration (0.35 muM), the time to reach a stable adsorption maximum was approximately 30 min. Interestingly, the maximum surface concentration attained for all solution concentrations studied by the QCM method was 25 +/- 1 pmol cm-2, close to that predicted for monolayer coverage. The dissipation was monitored during adsorption, and only small changes were detected, implying a rigid adsorption model, as needed when using the Sauerbrey equation. Cyclic voltammetric data were consistent with a one-electron, surface-confined CuII/CuI azurin process with fast electron-transfer kinetics. The electroactive surface concentration calculated using voltammetry was 7 +/- 1 pmol cm-2. The differences between the QCM and voltammetrically determined surface coverage values reflect, predominantly, the different measurement methods but imply that all surface-confined azurin is not electrochemically active on the time scale of cyclic voltammetry.     

Thiolate chemistry: a powerful and versatile synthetic tool for immobilization/functionalization of oligothiophenes on a gold surface

The synthesis and characterization of a series of quaterthiophenes (4Ts) with thiolate groups protected with 2-cyanoethyl (CNE), 2-trimethylsilylethyl (TMSE), and acetyl (Ac) groups are described. Sequential cleavage of these different protecting groups allows for the preparation of 4Ts derivatized with ferrocene and/or alkanethiol chains. The electrochemical behavior of these compounds has been analyzed in solution by cyclic voltammetry (CV). A ferrocene-derivatized dithiol 4T 14 and a dithiol 4T 15 with two TMSE-protected thiolate groups have been immobilized on a gold surface as monolayers that have been characterized by CV, ellipsometry, contact-angle measurement, and X-ray photoelectron spectroscopy (XPS). The results show that molecules 14 and 15 are doubly grafted with a horizontal orientation of the conjugated system relative to the surface. Furthermore, application of the deprotection/alkylation sequence of the remaining protected thiolate groups on a monolayer of 15 allows for efficient post-functionalization.     

Characterization of the [Ru(CN)5(pyS)] ion complex adsorbed on gold, silver and copper substrates by surface-enhanced Raman spectroscopy

The adsorption of the [Ru(CN)₅(pyS)]⁴⁻ (pyS=4-mercaptopyridine) ion complex on gold, silver and copper surfaces has been studied by surface-enhanced Raman spectroscopy (SERS). The influence of the nature of the metallic substrates in the adsorption geometry of the complex is reflected in a strong variation of the SERS spectra, particularly, the relative intensities of characteristic vibrational modes of pyS and CN ligands, which is likely to result from changes in specific chemical interactions involving both ligands and the surface. The effect of the surface modification procedure on the properties of the adsorbed monolayers has also been investigated for the gold surface. Surface modification has been performed by self-assembly or under an electrochemical potential. The spectroscopic results have shown that, according to the modification procedure, the modifier can be bound to the surface via sulfur atom or via CN nitrogen atoms. The ability to control the orientation of the adsorbed monolayer permits control over the properties of the interface, as demonstrated by the study of the electrochemistry of cytochrome-c (cyt-c) on the differently prepared surfaces. A reversible electrochemical response of the metalloprotein is only observed on the self-assembly prepared surface, where CN moieties of the surface modifier are available to interact with the protein molecule.     

Langmuir–Blodgett Monolayers and Films of Alkylated Tetraazacrowns Containing Metal Ions and Nanoparticles

The behavior of individual 1,7-dicetyltetraaza-12-crown-4 and its mixture with 1,4,7,10-tetracetyltetraaza-12-crown-4 in the Langmuir monolayers at the subphases containing Cu(II) ions or colloidal gold particles is studied. Based on the compression isotherms, the complexing ability of these amphiphilic cyclenes in a monolayer at the surface of aqueous dilute solutions of copper salt is established. It was shown that the fraction of complexes in a monolayer is proportional to the copper ion concentration in the subphase. Using surface balance, atomic force microscopy, and electron microscopy methods, it was revealed that the monolayer of dicetylcyclene at the surface of gold hydrosol binds nanoparticles from the subphase; the number of particles bound by the monolayer is proportional to their content in the hydrosol. The Langmuir–Blodgett films (LBF) of dicetylcyclene are prepared; their ability to bind copper ions from solution was disclosed by quartz crystal microbalance. The LBFs of dicetylcyclene containing gold nanoparticles in each layer are assembled.