The sorption of divalent metal ions on AlPO4

The sorption of Cu(2+), Pb(2+), Ni(2+), and Cd(2+) ions on the aluminum(III) phosphate was observed to increase with increases in the concentration, temperature, and pH of the system. The apparent dissociation (pK(a)), binding (pK(b)) and exchange (pK(ex)) constants of aluminum(III) phosphate were evaluated and found to be dependent upon the temperature and nature of the metal cations. The values of the dissociation constants (pK(a)) followed the order Pb(2+)相似文献   

Interactions of the hormone oxytocin with divalent metal ions

The interaction of the cyclic nonapeptide oxytocin (OT) with a number of alkaline earth and divalent transition metal ions (X(2+)) was examined employing mass spectrometry (MS) and ion mobility spectrometry (IMS) techniques in combination with molecular dynamics (MD) and density functional theory (DFT) calculations. Under acidic conditions it was found that OT exhibits an exceptionally strong affinity for all divalent metal ions resulting in strong [OT + X](2+) peaks in the mass spectrum. Under basic conditions only Cu(2+) and Ni(2+)-OT complexes were detected and these were singly, doubly, triply, or quadruply deprotonated. Collision-induced dissociation of the [OT - 3H + Cu](-) complex yielded exclusively C-terminal Cu(2+)-containing fragments (Cu(2+)fragment(3-)), suggesting that the Cu(2+) ligation site includes deprotonated C-terminal backbone amide nitrogen atoms and the N-terminal amino nitrogen atom in [OT - 3H + Cu](-). MD and DFT calculations indicate a square-planar complex is consistent with these observations and with experimental collision cross sections. MD and DFT calculations also indicate either an octahedral or trigonal-bipyramidal complex between Zn(2+) and OT is lowest in energy with carbonyl oxygens being the primary ligation sites. Both complexes yield cross sections in agreement with experiment. The biological impact of the structural changes induced in OT by divalent metal ion coodination is discussed.     

Kinetic studies for sorption of some metal ions from aqueous acid solutions onto TDA impregnated resin

Summary Kinetic studies for sorption of uranium, thorium and cobalt ions from hydrochloric acid solutions using tri-dodecyl amine (TDA) loaded on Amberlite XAD4 (polystyrene resin supplied by Rohm and Haas) using the batch technique, have been evaluated and assessed. Analysis of the respective data in accordance with three kinetic models revealed that the particle diffusion mechanism is the rate determining step, and the sorption for each metal ion on the impregnated sorbent follows the first order reversible kinetics. Values of the first order rate constants, rate constants of intraparticle transport, and the particle diffusion coefficients for the studied ions were determined. Sorption isotherms, which have been evaluated from the distribution coefficients for these ions, were found in good fit with the Langmuir and Freundlich isotherms.     

Sorption of divalent metal ions on CrPO4

The divalent metal ion sorption (Cu(2+), Cd(2+), Ni(2+), and Pb(2+)) on chromium phosphate (CrPO(4)) was studied as a function of pH, temperature, and concentration of metal ions. The sorption of metal ions is observed to increase with the increase in pH, temperature, and concentration of metal ions in solution. The mechanism of sorption is found to be the exchange of the hydrolyzed metal cations with the protons from solid at high temperature. The sorption at low temperature is found to be accompanied by the precipitation of the corresponding metal phosphates such as Pb(3)(PO(4))(2).     

Regularities of the sorption behavior of actinide ions on mineral colloid particles

It is shown that an alternative to K _d in describing sorption at low degrees of surface saturation of colloid particles is pH₅₀ which takes into account both the properties of the sorbent and sorbate. The correlations of pH₅₀ with cation charge density for the An(III)-An(IV)-An(V)-An(VI) series and with hydrolysis constants are presented. The redox reactions with plutonium that accompany its sorption onto Fe(III) oxides are discussed.     

Equilibrium studies of the sorption of Cu(II) ions onto chitosan

Chitosan is a polymer that can be obtained from the shells of seafood such as prawns, crabs, and lobsters. Chitosan has free amino groups, which can attract metal ions, and has been used as an adsorbent for the removal of metal ions from effluents. In this research, the sorption of copper ions from solution onto chitosan at two pHs has been investigated. DSC, TGA, surface area, SEM, and NMR studies have been used to report the pure physical states of chitosan and the chitosan-copper complex. The experimental isotherm data were analyzed using the Langmuir, Freundlich, and Redlich-Peterson equations. Correlation coefficients were determined for each isotherm analysis. Error functions have been used to determine the alternative single component parameters by nonlinear regression due to the inherent bias in using the correlation coefficient resulting from linearization. The error function method provided the best parameters for the isotherm equations in this system and is demonstrated for error comparison purposes.     

Equilibrium and kinetics for the sorption of promethazine hydrochloride onto K10 montmorillonite

This study presents the adsorption of cationic drug, promethazine hydrochloride from aqueous solution onto K10 montmorillonite. The effects of pH and temperature on adsorption process were investigated. Maximum adsorption pH was obtained to be about 7.5. Thermodynamic parameters found in this study depict the exothermic nature of adsorption. The process was favorable and spontaneous. From kinetic studies, it was found that adsorption process obeyed the pseudo-second-order kinetic model. The Langmuir, Freundlich, Dubinin-Radushkevich (DR) models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The fit of the Langmuir and DR models appeared to be good. Physisorption mainly controls the whole adsorption process but chemisorption also shows a particular contribution.     

Modeling the mechanism involved during the sorption of methylene blue onto fly ash

Batch sorption experiments were carried out to remove methylene blue from its aqueous solutions using fly ash as an adsorbent. Operating variables studied were initial dye concentration, fly ash mass, pH, and contact time. Maximum color removal was observed at a basic pH of 8. Equilibrium data were represented well by a Langmuir isotherm equation with a monolayer sorption capacity of 5.718 mg/g. Sorption data were fitted to both Lagergren first-order and pseudo-second-order kinetic models and the data were found to follow pseudo-second-order kinetics. Rate constants at different initial concentrations were estimated. The process mechanism was found to be complex, consisting of both surface adsorption and pore diffusion. The effective diffusion parameter D(i) values were estimated at different initial concentrations and the average value was determined to be 2.063 x 10(-9)cm2/s. Analysis of sorption data using a Boyd plot confirms the particle diffusion as the rate-limiting step for the dye concentration ranges studied in the present investigation (20 to 60 mg/L).     

Solvent extraction of divalent metal ions with azacrown ether substituted acylpyrazolones

Novel 4-acyl-5-pyrazolones having aza-15-crown-5 (HPMP-A15C5) and aza-18-crown-6 (HPMP-A18C6) moieties as an intramolecular synergist have been synthesized by simple coupling reactions between 1-phenyl-3-methyl-4-chloroacetyl-5-pyrazolone and the corresponding azacrown ethers. The solvent extraction of the divalent metal ions (Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+) and Pb(2+)) were examined. Synergistic extractions with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (HPMBP) and benzocrown ethers were also examined for a comparison. Extractions with the novel acylpyrazolones were unique and quite different from those with HPMBP and benzocrown ethers. The synergistic effect with benzocrown ethers was low, and an obvious difference brought by the ring size was not observed. The extractions of the divalent metal ions with HPMP-A18C6 were generally enhanced, as compared to those alone with HPMBP; on the contrary, the extractions with HPMP-A15C5 were relatively poor.     

Effect of divalent metal ions on DNA studied by capillary electrophoresis

Divalent metal ions, such as Zn(2+), Co(2+), and Ni(2+), are capable of incorporating into DNA under certain conditions to form complexes termed M-DNA. To better understand the effects of these cations on DNA we used capillary electrophoresis (CE). The presence of these metal ions in a typical genotyping buffer led to broad peaks with low fluorescence intensities. In addition, some of the metal-complexed DNA molecules had different electrophoretic mobilities than their normal DNA counterparts. It is likely that the mobility shifts observed in the electropherograms of these affected fragments are due to the divalent cations causing structural changes in the single-stranded DNA. However, as can be seen from the resulting peak shapes, the structure, charge, and/or mass changes due to metal binding are not conserved among all of the DNA fragments. The extent of both peak-broadening and mobility shifts were found to be dependent on the metal cation and its concentration, the length of time that the DNA sample existed in formamide prior to injection into the capillary, and also the fragment size and sequence. These results suggest that the presence of metal ions might be responsible for the poor CE performance that occurs when genotyping certain kinds of DNA samples.     

Kinetics of the sorption of metal ions from sea water on clinoptilolite

Based on a study of the sorption kinetics of metal ions from sea water onto granular clinoptilolite and powdered clinoptilolite incorporated into a grain of a highly permeable inert support it has been shown that the rate of the sorption processes is limited principally by diffusion in the microgranules of zeolite. For the Tedzami clinoptilolite studied the characteristic dimensions of the microgranules are 15–20 m and are commensurate with the dimensions of microcrystals determined independently.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 263–267, February, 1990.We thank E. V. Venetsianov, L. S. Kamenetskii and M. V. Veksler for assistance in the investigation.     

Thermal properties of some complexes of quinolinic acid with divalent metal ions

Studies of the complexes of pyridinecarboxylic acids with divalent metal ions as a function of the position of the carboxyl groups were extended. The thermal properties of the complexes of quinoline acid (pyridine-2,3-dicarboxylic acid) with several divalent metal ions were determined by thermogravimetry (TG) and differential thermal analysis (DTA). A correlation between these compounds and others obtained by reaction between the studied metal ions with similar acids (lutidinic acid (pyridine-2,4-dicarboxylic acid) and isocinchomeronic acid (pyridine-2,5-di-carboxylic acid) is discussed in terms of the position of the carboxyl group far from the aza group. The thermal stability of the metal complexes is in the order Mn(II) > Fe(II) > Zn(II) ? Co(II) > Ni(II) > Cu(II).     

The effect of mineral composition on the sorption of cesium ions on geological formations

The sorption of cesium-137 on rock samples, mainly on clay rocks, is determined as a function of the mineral composition of the rocks. A relation between the mineral groups (tectosilicates, phyllosilicates, clay minerals, carbonates) and their cesium sorption properties is shown. A linear model is constructed by which the distribution coefficients of the different minerals can be calculated from the mineral composition and the net distribution coefficient of the rock. On the basis of the distribution coefficients of the minerals the cesium sorption properties of other rocks can be predicted.     

Coordination numbers of hydrated divalent transition metal ions investigated with IRPD spectroscopy

Hydration of the divalent transition metal ions, Mn, Fe, Co, Ni, Cu, and Zn, with 5-8 water molecules attached was investigated using infrared photodissociation spectroscopy and photodissociation kinetics. At 215 K, spectral intensities in both the bonded-OH and free-OH stretch regions indicate that the average coordination number (CN) of Mn(2+), Fe(2+), Co(2+), and Ni(2+) is ~6, and these CN values are greater than those of Cu(2+) and Zn(2+). Ni has the highest CN, with no evidence for any population of structures with a water molecule in a second solvation shell for the hexa-hydrate at temperatures up to 331 K. Mn(2+), Fe(2+), and Co(2+) have similar CN at low temperature, but spectra of Mn(2+)(H(2)O)(6) indicate a second population of structures with a water molecule in a second solvent shell, i.e., a CN < 6, that increases in abundance at higher temperature (305 K). The propensity for these ions to undergo charge separation reactions at small cluster size roughly correlates with the ordering of the hydrolysis constants of these ions in aqueous solution and is consistent with the ordering of average CN values established from the infrared spectra of these ions.     

Interaction of dinucleotides with divalent metal ions: A circular dichroism study

The interactions between NAD⁺ and NADP⁺ and the divalent ions Mg²⁺, Mn²⁺ and Co²⁺ have been studied by circular dichroism in the UV range. A visible C.D. study has been carried on the Co²⁺ complexes.The observed changes of the UV and C.D. as a function of temperature clearly show that the metal ion does not bridge the purine base and the nicotinamide.The observed changes of the UV C.D. as a function of temperature clearly show that the metal ion does not bridge the purine base and the nicotinamide.The strong modification of the UV C.D. and the appearance of visible C.D. in 0.1 M NAD⁺ or NADP⁺ solutions in presence of Co²⁺ which occurs when the N(1) adenine atom is deprotonated, has been ascribed to the formation of a 1:2 Co²⁺-dinucleotide complex where the two adenine bases are stacked.     

Complexes of divalent metal ions with cinchomeronic and dinicotinic acid thermal properties

The thermal properties of the complexes of cinchomeronic and dinicotinic acid with several divalent metal ions were determined by thermogravimetry (TG) and differential thermal analysis (DTA).For the thermal stability of the anhydrous compounds a sequence may be observed for the metal ions with cinchomeronic (3,4-H₂PC) and dinicotinic acid (3,5-H₂PC):

The thermal stability of the pyridine carboxylic acid for each metal of the series is: dinicotinic > cinchomeronicThe activation energy values for each thermal reaction were also calculated, using the Coats and Redfern algorism, by the Univac 1108 computer, by a program properly implemented for the statistical analysis of the data to obtain the reaction order and the activation parameters with the relative confidence limits.     

Eigen kinetics in surface complexation of aqueous metal ions

The mechanism of chemisorption of aqueous metal ions at surfaces has long been a topical issue in such fields as soil chemistry and bioenvironmental science. Here it is quantitatively demonstrated for the first time that release of water from the inner hydration shell is the rate-limiting step in inner-sphere surface complexation. The reactive intermediate is an outer-sphere complex between metal ion and surface site, with an electrostatically controlled stability defined by Boltzmann statistics. Using tabulated dehydration rate constants for metal ions, the resulting scheme allows for prediction of rates of sorption of aqueous metal ions at any type of complexing surface.