Sur les approximations « isotrope » et « anisotrope » de l''opérateur tangent pour les méthodes tangentes incrémentale et affineOn the ‘isotropic’ and ‘anisotropic’ approximations of the tangent operator in the incremental tangent and affine methods

Three localisation rules, TFA, the incremental tangent, and the affine method, are recalled and evaluated in the context of the elastoplastic micromechanical analysis of heterogeneous materials, composites or polycrystals. With the help of a severe example, it is shown how methods based on the complete anisotropic elastoplastic tangent operator yield very stiff predictions which are far from the reference solution; the same conclusion holds for the method using the elastic accommodation rule. On the other hand, using an isotropic form of the tangent operator delivers much better responses. The reasons for such differences are discussed, together with possible justifications for the choice of the isotropic form. To cite this article: J.-L. Chaboche, P. Kanouté, C. R. Mecanique 331 (2003).     

Modélisation du comportement thermique d'un outil de fraisage : approche par identification de système non entierThermal modelling of a milling tool: a noninteger system identification approach

In this work we present an experimental apparatus devoted to the thermal characterisation of a milling tool. The experimental device used thermistors, one for each insert. Each thermistor is located at a point in the tool close to the tip of the insert. The heat flux in each insert is expressed according to the temperature at the sensor from a non-integer model. The parameters of the model are identified from transient evolutions measurements of the temperature on the sensor and on the cutting edge. An application shows the difference in the behaviour of each insert during machining from the estimated heat fluxes. To cite this article: J.-L. Battaglia et al., C. R. Mecanique 330 (2002) 857–864.     

Modèles discrets de structures tissées : Analyse de stabilité et de drapéDiscrete models of woven structures: stability and draping analysis

A discrete model of a woven fabric structure is established, whereby nodes endowed with a mass and a rotational rigidity are connected by rigid bars to form a two-dimensional truss. The set of four bars that delineate a quadrilateral area is further endowed with a torsion deformation mode. The kinematics of the truss reproduces the large rotations and displacements encountered for real tissues. The equilibrium shape of such a structure is obtained as the minimum of its total potential energy versus the whole set of kinematic translational and rotational variables, accounting for eventual kinematic constraints due to contact with a rigid surface by the Lagrange multipliers method. A stability analysis is conducted, and the potentiality of the model is illustrated by fabric draping simulations. To cite this article: B. Ben Boubaker et al., C. R. Mecanique 330 (2002) 871–877.     

Structuration de la convection mixte en milieu poreux confiné latéralement et chauffé par le bas : effets d''inertiePattern formation of mixed convection in a porous medium confined laterally and heated from below: effect of inertia

We consider the onset of convection in a porous medium heated from below and subjected to a horizontal mean flow. The effect of porous inertia is studied, and the transverse aspect ratio a of the medium is taken into accout. We find that the dominant modes are longitudinal rolls (L.R) if a is an integer or transverse traveling rolls (T.R) if a is below a_c with a_c<1. When a is not an integer with a>a_c, the setting on patterns are oscillatory three-dimensional structures (3D) for a>1 or T.R for a_c<a<1 provided that the Reynolds number remains below a critical value Re_K^*. We show that these structures are replaced by L.R if Re_K>Re_K^*. To cite this article: A. Delache et al., C. R. Mecanique 330 (2002) 885–891.     

Vérification expérimentale de la relation de réciprocité d'Onsager pour l'électro-osmose et l'électro-filtration dans une argile naturelleExperimental verification of the Onsager's reciprocal relations for electro-osmosis and electro-filtration phenomena on a saturated clay

This Note is devoted to the experimental verification of the Onsager's reciprocal relations in the particular case of electro-osmosis and electro-filtration. A special set up has been designed to carry out the measurements of both the electro-osmotic permeability and the streaming potential. This has been performed by using a natural material i.e., saturated kaolinite. To cite this article: K. Beddiar et al., C. R. Mecanique 330 (2002) 893–898.     

Développement d''un modèle en vue de la prédiction du rallumage d''un foyer de turboréacteur à haute altitudeDevelopment of a model to predict the ignition performance of a turbojet engine at high altitude

Within the context of turbojet engine re-ignition after in-flight extinction, a thermo-diffusive model has been developed to describe the electrical ignition, at low pressure and low temperature, of a cluster of fuel droplets. The model involves the resolution of the conservation equations of mass, species and energy. It also takes into account the various physical and chemical phenomena occurring during the ignition process. This Note presents the ignition model and preliminary results of this model applied to an experimental configuration. To cite this article: V. Quintilla et al., C. R. Mecanique 330 (2002) 811–818.     

Computing Green's function of elasticity in a half-plane with impedance boundary condition

This Note presents an effective and accurate method for numerical calculation of the Green's function G associated with the time harmonic elasticity system in a half-plane, where an impedance boundary condition is considered. The need to compute this function arises when studying wave propagation in underground mining and seismological engineering. To theoretically obtain this Green's function, we have drawn our inspiration from the paper by Durán et al. (2005), where the Green's function for the Helmholtz equation has been computed. The method consists in applying a partial Fourier transform, which allows an explicit calculation of the so-called spectral Green's function. In order to compute its inverse Fourier transform, we separate as a sum of two terms. The first is associated with the whole plane, whereas the second takes into account the half-plane and the boundary conditions. The first term corresponds to the Green's function of the well known time-harmonic elasticity system in (cf. J. Dompierre, Thesis). The second term is separated as a sum of three terms, where two of them contain singularities in the spectral variable (pseudo-poles and poles) and the other is regular and decreasing at infinity. The inverse Fourier transform of the singular terms are analytically computed, whereas the regular one is numerically obtained via an FFT algorithm. We present a numerical result. Moreover, we show that, under some conditions, a fourth additional slowness appears and which could produce a new surface wave. To cite this article: M. Durán et al., C. R. Mecanique 334 (2006).     

Selection of two-dimensional nonlinear strain waves in micro-structured mediaSelection d'ondes de déformation non linéaires à deux dimensions dans des milieux à microstructure

It is shown that the micro-displacement gradient allows the propagation of two-dimensional localized long nonlinear strain waves in a medium with microstructure. These waves may exist even in the presence of dissipation and energy input in the microstructured medium but with selected values of the wave amplitude and velocity. An increase or a decrease in the wave amplitude and velocity happens faster at the initial stage than that of the plane localized wave. However, their steady values selected by the energy input/output, are higher for the plane waves. To cite this article: A.V. Porubov et al., C. R. Mecanique 332 (2004).     

Identification de la relation de dispersion dans les barresIdentification of the dispersion relation in rods

Dispersion and attenuation of longitudinal waves in elastic or weakly viscoelastic rods are measured by analysing the resonant frequencies present in the strain spectrum due to an unknown loading. The method takes the finite measuring time of the test into account. It is applied to an aluminium bar, in which the dispersion relation is identified very accurately at frequencies up to 60 kHz. To cite this article: R. Othman et al., C. R. Mecanique 330 (2002) 849–855.     

Asymptotics at infinity of solutions to the Neumann problem in a sieve-type layerComportement asymptotique à l'infini d'un problème de Neumann dans une couche perforée

The Neumann problem is considered in a domain $\text{Ω}$, which can differ from a periodic layer inside a compact set. We prove the Fredholm property of the corresponding operator in step-weighted Sobolev spaces and determine its kernel and cokernel. All these results are based on the obtained asymptotic representation of solutions at infinity. To cite this article: S.A. Nazarov, G. Thäter, C. R. Mecanique 331 (2003).     

Homogenization of an elasticity problem in domains with a net of slender bars near surface

We consider an elasticity problem in a domain Ω⁽⁾=ΩF⁽⁾, where Ω is an open bounded domain in R³, F⁽⁾ is a connected nonperiodic set in Ω like a net of slender bars, and is a parameter characterizing the microstructure of the domain. We consider the case of a surface distribution of the set F⁽⁾, i.e., for sufficiently small , the set F⁽⁾ is concentrated in arbitrary small neighbourhood of a surface Γ. Under a hypothesis on the asymptotic behaviour of the energy functional, we obtain the macroscopic (homogenized) model. To cite this article: M. Goncharenko, L. Pankratov, C. R. Mecanique 331 (2003).     

Complexification phenomenon in an example of sensitive singular perturbationPhénomène de complexification dans un exemple de perturbation singulière sensitive

We consider singular perturbation problems depending on a parameter ε?0 such that for ε>0 the solution u^ε belongs to a Sobolev space on a domain $\text{Ω}$, but the limit u⁰ is not a distribution on $\text{Ω}$. A very simple model problem, solvable by Fourier transform allows us to study the complexification process of u^ε as $\text{ε↘0}$. The limit holds in the topology of a space of analytical functionals. To cite this article: C.A. De Souza, É. Sanchez-Palencia, C. R. Mecanique 332 (2004).     

L'identification des propriétés mécaniques de matériaux avec la méthode des champs virtuels,une alternative au recalage par éléments finisIdentification of the mechanical properties of materials with the virtual fields method,an alternative to finite element model updating

A method allowing the identification of parameters that govern constitutive equations of materials is proposed in this Note. These parameters are identified from heterogeneous strain fields. The method is direct so that iterative calculations based on finite element model updating are avoided. To cite this article: M. Grédiac et al., C. R. Mecanique 330 (2002) 107–112.     

Un modèle paramétrique d'évolution de surface pour matériaux contraints : modélisationA parametric model of surface evolution for materials under constraint; part I: modeling

We present a model describing the surface changes of an elastic preconstrained material which is valid for large deformations. The surface profile is described by a parametric curve that allows the emergence of infinite tangents and back return point as the surface evolves. The proposed model covers a number of classic models: Spencer (1994), Yang (1993), Kassner (1994), Chiu (1994). These latter models were limited to surface profiles with one-to-one representations and low amplitudes of deformation. To cite this article: M. Carrive, J. Grilhé, C. R. Mecanique 334 (2006).     

Optimal control for a Timoshenko beamContrôle optimal d'une barre de Timoshenko

We consider a linear model of a rotating Timoshenko beam, which is clamped at one end to a disk the other being free. The motion of the beam is controlled by the angular acceleration of the disk. We study the minimization problem of mean square deviation of the Timoshenko beam from a given position. For the minimization problem of the first mode we prove that optimal control is the chattering control, i.e., it has an infinite number of switches in a finite time interval. We construct a suboptimal control with a finite number of switches. To cite this article: M.I. Zelikin, L.A. Manita, C. R. Mecanique 334 (2006).     

Optimisation de la forme de la trochoïde dans un engrenage droitOptimization of the trochoid form in spur wheels

Generally, mechanical damage in gear wheels results from either cracks at the base of the tooth or from high contact pressure between the teeth.Starting from the principle of mass minimization, this Note develops a new formulation in terms of displacement, calling on a new, more resistant and less voluminous form for the base of the teeth. As a result, the first cause of the breakages which happen at this point because of a concentration of constraints are limited. To cite this article: M.E.H. Bouanane, M. Bouchama, C. R. Mecanique 331 (2003).     

Characterization of a class of polycrystals whose effective elastic bulk moduli can be exactly determinedCaractérisation d'une classe de polycristaux dont les modules de compression isotrope effectifs peuvent exactement être déterminés

Necessary and sufficient conditions are established for the stress response of a linearly elastic material to an isotropic stain to be hydrostatic. In the 3D case, these conditions are satisfied not only by the isotropic and cubic materials but also by all other anisotropic materials provided appropriate restrictions are imposed. In the 2D case, only the isotropic and square materials have an isotropic stress response to an isotropic strain. Using a uniform field argument, the elastic bulk modulus of a polycrystal consisting of monocrystals compatible with the established conditions is shown to equal that of any constituent monocrystal. Thus, Hill's relevant result about a polycrystal composed of cubic monocrystals is generalized. To cite this article: Q.-C. He, C. R. Mecanique 331 (2003).     

Numerical analysis of a quasistatic piezoelectric problem with damage

The quasistatic evolution of the mechanical state of a piezoelectric body with damage is numerically studied in this paper. Both damage and piezoelectric effects are included into the model. The variational formulation leads to a coupled system composed of two linear variational equations for the displacement field and the electric potential, and a nonlinear parabolic variational equation for the damage field. The existence of a unique weak solution is stated. Then, a fully discrete scheme is introduced by using a finite element method to approximate the spatial variable and an Euler scheme to discretize the time derivatives. Error estimates are derived on the approximate solutions, from which the linear convergence of the algorithm is deduced under suitable regularity conditions. Finally, a two-dimensional example is presented to demonstrate the behaviour of the solution. To cite this article: J.R. Fernández et al., C. R. Mecanique 336 (2008).     

Confined buckling of inextensible rods by convex difference algorithms

In this Note we present an approach to determine the local minima of a specific class of minimization problems. Attention is focused on the inextensibility condition of flexible rods expressed as a nonconvex constraint. Two algorithms are derived from a special splitting of the Lagrangian into the difference of two convex functions (DC). They are compared to the augmented Lagrangian methods used in this context. These DC formulations are easily extended to contact problems and applied to the determination of confined buckling shapes. To cite this article: P. Alart, S. Pagano, C. R. Mecanique 330 (2002) 819–824.     

Contribution de la logique floue à la représentation des dimensions des pièces d'un ensemble mécaniqueFuzzy logic contribution to the representation of mechanical assembly pieces

The cotation process of a mechanical assembly is a long and complex step of the design. The piece dimensions are often modeled with 2D vectors or torsors. A new representation based on fuzzy logic is presented in this article. The calculus methods of fuzzy dimensions are examined and an application to the extreme positions of a rod-crank system with uncertain dimensions is also presented. To cite this article: C. Lelu, M. Dahan, C. R. Mecanique 330 (2002) 133–140.