通过RAFT法制备聚合物/膨润土杂化材料

通过可逆加成-断裂链转移(RAFT)自由基聚合方法合成了聚合物/膨润土(蒙脱石)杂化材料. 以乙基黄原酸基膨润土为链转移剂, AIBN为引发剂, 在环己酮溶液中, 通过甲基丙烯酸甲酯的RAFT自由基聚合, 得到了一系列的聚合物/膨润土杂化材料. 并用FT-IR, NMR, SPM, TG, GPC等分别对产物的微观结构、热性能、有机物含量以及分子量和分子量分布进行了表征和测试.     

脉冲激光引发自由基聚合的动力学研究

处理了无链转移时脉冲激光引发自由基聚合中的动力学问题:推导出聚合产物数均和重均分子量的严格数学表达式,给出了链自由基、死聚物及总的聚合产物的归一化的分子量分布函数,计算结果表明:随着单体转化率的上升,各种分子参数,例如数均和重均分子量,以及多分散指数的数值周期性地振荡,且振幅逐渐下降,分子量分布曲线则包含一些特征峰,且随着每次脉冲激光产生的初级自由基浓度的降低,分布曲线峰的数目增加,另外,与歧化终止相比,偶合终止使产物的分子量分布略为变窄.     

控制/活性自由基聚合的进展

1活性自由基聚合1.1控制/活性自由基聚合自由基聚合是工业生产乙烯基类聚合物的重要方法。因其可聚合的单体种类多,能以水为介质进行悬浮和乳液聚合,反应温和,聚合工艺操作简便,重现性好,自20世纪50年代以来已成为工业生产高分子产品的重要技术。由于自由基聚合中增长链自由基很活泼,容易发生双分子偶合或歧化终止以及链转移反应,得到无活性的聚合物,聚合产物分子量分布宽、分子量和结构不可控制,从而影响聚合物的性能,需要改进。活性自由基聚合起始于20世纪80年代,在90年代取得了突破性进展,并成为当今高分子化学研究的热点之一。由于它能…     

以双硫酯为链转移剂的活性自由基聚合

合成并研究了两种双硫酯链转移剂的纯化方法 ,进行了多种单体以双硫酯为链转移剂的活性自由基聚合及嵌段共聚 .发现以PhC(S)SC(CH3) 2 Ph为链转移剂的效果比PhC(S)SCH(CH3)Ph好 ,聚合产物的多分散性系数较小 .引发剂与链转移剂的摩尔数比为 1∶3 5～ 1∶4 2时 ,得到多分散性系数小 ,实测分子量与理论分子量相近的聚合产物 .聚合物的分子量随时间和转化率的增加而增加 ,加入第二单体形成嵌段共聚物 ,具有活性聚合特征 .聚甲基丙烯酸酯大分子引发剂引发丙烯酸酯单体聚合时 ,聚合速度最快 .     

新型X光显影含糖聚合物的合成与表征

用自由基本体聚合方法合成了一种新型的X光显影含糖三元共聚物P(2-IEMA-AcGEMA-MMA). 探讨了单体配比和链转移剂用量对聚合物分子量及其分布的影响, 并用FTIR, 1H NMR和GPC对其结构进行了表征. 研究结果表明, 改变单体配比对聚合物的分子量几乎不产生影响, 但减少链转移剂用量时, 可明显增加三元共聚物的分子量. 聚合物分子量分布一般在2~3之间, 符合自由基聚合产物分子量分布的一般规律. 聚合物具有良好的显影性, 显影效果随着样品厚度的增加而增强.     

醋酸乙烯(VAc)的活性/可控自由基聚合

本文综述了醋酸乙烯(VAc)单体的活性/可控自由基聚合研究进展.醋酸乙烯是一种重要的单体,是生产聚醋酸乙烯(PVAc)和聚乙烯醇(PVA)的原料.传统的自由基聚合方法如溶液、乳液、悬浮和分散等都可以用来实现VAc的聚合,得到不同分子量的PVAc和PVA.由于醋酸乙烯增长自由基的高活性,存在向聚合物链的链转移从而导致聚合物的分子量分布比较宽,为了得到分子量分布更窄的聚合物,活性可控聚合方法也被用来实现VAc的聚合.     

聚合温度对聚氯乙烯树脂结构和性能的影响

采用凝胶渗透色谱法、¹³H NMR和DSC法测定了悬浮聚合PVC树脂的平均分子量、间规度、结晶度和玻璃化温度.结果表明:聚合温度下降,PVC的平均分子量上升,分子量的对数值与聚合温度的倒数成正比;PVC的间规度和结晶度均增大,在形成结晶的间规链段的最短长度(ξ_min)为6时,由间规度计算的结晶度理论值与测定值接近;分子量和结晶度增加的共同作用,使PVC的玻璃化转变温度上升.     

可控/“活性”自由基聚合制备聚乙烯及聚卤代烯烃

可控/“活性”自由基聚合(CLRP)可以用于制备分子量分布窄、分子链缺陷少的聚合物,如聚乙烯(PE)、聚氯乙烯(PVC)、聚偏氯乙烯(PVDC)和聚偏氟乙烯(PVDF),且易控制上述单体与其他单体共聚得到嵌段聚合物。本文调研了近年来可控/“活性”自由基聚合(如碘转移聚合(ITP)、氮氧稳定自由基聚合(NMP)、可逆加成断裂链转移(RAFT)聚合和金属催化的活性自由基聚合(OMRP)等)制备聚乙烯和聚卤代烯烃等方面的工作,并指出了未来的发展方向。     

甲基丙烯酸甲酯聚合动力学和分子量模型及仿真

考虑甲基丙烯酸甲酯聚合过程中体积收缩，反应物和生成物的浓度变化，以及由于凝胶、玻璃化和笼闭等效应对各速率常数和物性参数的影响，从基元反应和物料平衡出发，推导了半间歇，有链转移剂参与情况下的聚合动力学和分子量模型。用模型仿真计算了聚合温度、引发剂、溶剂和链转移剂的种类和浓度等对甲基丙烯酸甲酯聚合动力学和聚合过程中分子量变化的影响规律，并与实验和文献数据进行比较。     

大分子引发剂分子量对接枝聚合物基体的PDLC电光性能的影响

以可逆加成-断裂链转移(RAFT)、引发转移终止(iniferter)活性自由基聚合相结合的方法,用一步法制备了不同分子量的大分子引发剂RAFT-PS-co-PCMSI(MI),并通过紫外光聚合诱导相分离法制备了以接枝聚合物为基体的聚合物分散液晶(PDLC)膜.研究了不同分子量的MI对PDLC的微观形貌,关闭状态透光率,阈值电压,饱和电压以及记忆效应等方面的影响.研究表明,降低PDLC中MI的分子量,会使得液晶微滴粒径增大,阈值电压(Vth)、饱和电压(Vsat)减小,记忆效应、关闭状态透光率升高.     

A highly active neodymium chloride isopropanol complex/modified methylaluminoxane catalyst for preparing polyisoprene with high cis-1,4 stereospecificity and narrow molecular weight distribution

<正>Neodymium chloride isopropanol complex(NdCl_3·3~iPrOH) activated by modified methylaluminoxane(MMAO) was examined in isoprene polymerization in hexane,with regards to Nd compounds,aluminum(Al) compounds,[Al]/[Nd] ratio,polymerization temperature and time.NdCl_3-3~iPrOH exhibited high activity producing polymers featuring high cis-1,4 stereospecificity(96%),very high molecular weight(M_n1.0×10~6) and fairly narrow molecular weight distribution (MWD,M_w/M_n2.0) simultaneously.In comparison,neodymium isopropoxide also showed high activity providing polymers with narrow MWD(M_w/M_n = 2.07),but somewhat low cis-1,4 content(ca.92%),while neodymium chloride had no activity under present polymerization conditions.The Al compounds affected the polymer yield in the order of Al(i-Bu)_3MMAOAl(i-Bu)_2H.MMAO as cocatalyst afforded polyisoprene with high M_n over 1.0×10~6,whereas as stronger chain transfer agent than MMAO,Al(i-Bu)_3 and Al(i-Bu)_2H yielded polymers with low M_n(1.0×10~5-8.0×10~5). NdCl_3·3~iPrOH/MMAO catalyst showed a fairly good catalytic activity even at relatively low[Al]/[Nd]ratio of 30,and the produced polymer remained high cis-1,4 content of 95.8%along with high M_n over 1.0×10~6 even at elevated temperatures up to 70℃.The polymerization rate is of the first order with respect to the concentration of isoprene.The mechanism of active species formation was discussed preliminarily.     

Linear viscoelastic behaviors of polybutene-1 melts with various structure parameters

The effects of weight-average molecular(Mw), molecular weight distribution(MWD), and isotacticity on the linear viscoelastic behavior of polybutene-1 melts are studied. It is observed that the linear viscoelastic region becomes slightly narrower with increasing frequency. In frequency sweeps, the transition of the polymer melts flow from Newtonian flow to power-law flow can be observed. The melts with higher Mw and/or broader MWD, as well as higher isotacticity exhibit higher complex viscosity, zero shear viscosity, viscoelasticity moduli, relaxation modulus, broader transition zone, while lower critical shear rate, non-Newtonian index, and the frequency at which elasticity begins to play an important role. The relationship of zero shear viscosity on Mw has been established, which agrees with the classical power law. Furthermore, it is found that the cross-over frequency decreases with increasing Mw and the cross-over modulus increases with narrowing MWD.     

聚氯乙烯-丙烯酸丁酯接枝共聚物的结构表征

以通用聚氯乙烯(PVC)和脱氯化氢PVC树脂为基体,采用悬浮溶胀接枝共聚法合成聚氯乙烯-丙烯酸丁酯接枝共聚物,对脱氯化氢PVC和接枝共聚物的结构进行了表征.结果表明,以碱液为介质加热PVC能脱除少量氯化氢,得到以链节数为2,3,4的共轭双键为主的不饱和结构,而树脂的分子量变化不大;在相同接枝反应条件下,采用脱氯化氢PVC与丙烯酸丁酯接枝共聚可以提高接枝率和接枝效率;PVC接枝共聚物的特性粘度随接枝率增加而增加,其重均分子量和分子量分布指数均大于接枝所用的PVC树脂.     

Polyethylene with bimodal molecular weight distribution synthesized by 2,6-bis(imino)pyridyl complexes of Fe(II) activated with various activators

Polyethylenes with bimodal molecular weight distribution (MWD) were synthesized by 2,6-bis(imino)pyridyl complexes of Fe(II) combined with different activators, which were prepared from alkylaluminium. It is found that the molecular weight (MW) and MWD was influenced by not only iron complexes but activators as well. The activator plays key important role in determination of the MW and MWD of final polymer and the MWD shape could be regulated by selection of various activators and polymerization conditions. The study on the variation of the MWD with the polymerization time and fitting of bimodal MWD with two Flory distributions suggests that bimodal MWD is caused by chain transfer reaction to activator or two active sites.     

球形MgCl_2负载钛催化剂催化苯乙烯等规聚合与产物分子量分布研究

采用球形高效负载ZieglerNatta催化体系(TiCl4MgCl2AlR3二苯基二甲氧基硅烷(DPDMS)合成等规聚苯乙烯(iPS),催化效率最高可达7.7×103gPSgTi·h.通过多个SchulzFlory最可几分布对产物的分子量分布曲线拟合分峰来研究iPS的分子量及分子量分布的变化,AlEt3能使产物中低分子量部分含量增加,Al(iBu)3则倾向于形成高分子量的活性中心.体系中加入氢气不仅能显著提高催化效率,而且使iPS的分子量分布显著增宽.     

SUPPORTED ZIEGLER-NATTA CATALYSTS FOR ETHYLENE SLURRY POLYMERIZATION AND CONTROL OF MOLECULAR WEIGHT DISTRIBUTION OF POLYETHYLENE

The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidati...     

1-辛烯Ziegler-Natta聚合的活性中心多分散性——分子量分布及动力学的研究

本文通过对TiCl_3-Al(C_2H_5)_3聚合1-辛烯产物的双峰型分子量分布曲线用Schulz函数进行拟合、分峰处理,发现这种双峰型分布中的高分子量峰部分由一种活性中心生成,低分子量峰部分则由至少两种活性中心生成.将不同转化率时聚辛烯的分子量分布分峰拟合数据与聚合速率、活性中心数等测定数据相结合,得到了高分子量和低分子量两部分产物相应的活性中心上各自的动力学参数(增长速率常数、活性中心数、链转移常数等)及各自的聚合速率曲线,从而证实了多种活性中心的存在、它们催化特性的差异及与聚合物分子量分布增宽的关系.     

Low polydispersity star polymers via cross-linking macromonomers by ATRP

A new method for the synthesis of star polymers with high molecular weight and narrow molecular weight distribution (MWD) is presented. The star copolymers were prepared by atom transfer radical (co)polymerization (ATRP) of linear macromonomers with divinyl cross-linkers using low molar mass initiator. In contrast to prior "arm-first" procedures with macroinitiators, by using lower ratio of concentration of initiator to MM, the star polymers contained less initiating sites in the core, which decreased the extent of star-star coupling reactions and resulted in formation of star polymers with narrower MWD. Addition of more cross-linker and initiator during the reaction increased the star molecular weight and star yield while retaining the narrow MWD of the star polymer. For example, we synthesized a star polymer with molecular weight Mn = 466 000 g/mol and Mw/Mn < 1.2 in >98% yield.     

Ethylene Polymerization over Supported Titanium-Magnesium Catalysts: Heterogeneity of Active Centers and Effect of Catalyst Composition on the Molecular Mass Distribution of Polymer

New experimental approach was used for analysis of molecular weight distribution (MWD) of polymers produced over titanium-magnesium catalysts (TMC). Polymers were fractionated on to fractions with narrow MWD (polydispersity (PD) values Mw/Mn ≤ 2). Then some of these fractions were combined to get the minimal quantity of fractions with PD values close to 2 (Flory components). It was found that three fractions corresponding to three groups of active centers are sufficient for proper fitting experimental MWD curve for PE obtained over TMC with different Ti content and with different hydrogen concentration in polymerization.