A practical method for preparation of phenols from arylboronic acids catalyzed by iodopovidone in aqueous medium

A novel and efficient strategy for the ipso-hydroxylation of arylboronic acids to phenols has been developed using inexpensive, readily available, air-stable water-soluble povidone iodine as catalyst and aqueous hydrogen peroxide as oxidizing agent. The reactions were performed at room temperature under metal-, ligand- and base-free condition in a short reaction time. The corresponding substituted phenols were obtained in moderate to good yields by oxidative hydroxylation of arylboronic acids in aqueous medium.     

[Ir(COD)Cl]2/tris(2,4-di-t-butylphenyl)phosphite-catalyzed addition reactions of arylboronic acids with aldehydes

[Ir(COD)Cl]₂/tris(2,4-di-t-butylphenyl)phosphite-catalyzed addition reactions of arylboronic acids with aldehydes were described. The Ir(I) catalyst, generated from [Ir(COD)Cl]₂ and tris(2,4-di-t-butylphenyl)phosphite, was an efficient catalyst system for the addition reactions of a variety of arylboronic acids with aromatic and aliphatic aldehydes. The easy availability of the catalyst and good yields make these reactions potentially useful in organic synthesis.     

Quaternary ammonium hydroxide-functionalized g-C3N4 catalyst for aerobic hydroxylation of arylboronic acids to phenols

A new and efficient metal-free approach toward the synthesis of phenols via an aerobic hydroxylation of arylboronic acids by using a novel quaternary ammonium hydroxide g-C₃N₄ catalyst has been described. The functionalized quaternary ammonium hydroxide (g-C₃N₄-OH) has been prepared from graphitic carbon nitride (g-C₃N₄) scaffold by converting the residual –NH₂ and –NH groups to quaternary methyl ammonium iodide by performing a methylation reaction with methyl iodide followed by ion-exchange with 0.1 N KOH or anion exchange resin Amberlyst A26 (OH- form) by post-synthetic modification. The resultant g-C₃N₄-OH was characterized by XRD, FTIR, field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), N₂ adsorption/desorption isotherms, and acid–base titration. Tested as solid-base catalysts, the g-C₃N₄-OH showed excellent catalytic activity in the aerobic hydroxylation reaction by converting a variety of arylboronic acids to the corresponding phenols in high yields. More importantly, the g-C₃N₄-OH solid-base has been successfully reused four times with the minor loss of initial catalytic activity (10.5%).     

A novel sustainable strategy for the synthesis of phenols by magnetic CuFe2O4-catalyzed oxidative hydroxylation of arylboronic acids under mild conditions in water

A novel sustainable strategy for the synthesis of phenols has been developed using inexpensive, readily available, air-stable, and recyclable CuFe₂O₄ nanoparticles as the catalyst, and the corresponding substituted phenols were obtained in moderate to good yields by oxidative hydroxylation of arylboronic acids in water. Importantly, a ligand or an additive was not necessary. The catalyst was completely recoverable with an external magnet and could be reused six times without significant loss of catalytic activity.     

Effects of fluorine substituent on properties of cyclometalated iridium(III) complexes with a 2,2′-bipyridine ancillary ligand

Cationic cyclometalated Ir(III) complexes (Ir1-Ir5) with fluorine-substituted 2-phenylpyridine (ppy) derivatives as C^N cyclometalating ligands and 2,2′-bipyridine (bpy) as the ancillary ligand, have been synthesized and fully characterized. The influences of the number and the position of fluorine atoms at the cyclometalating ligands on the photophysical, electrochemical and oxygen sensing properties of the Ir(III) complexes have been investigated systematically. The introduction of fluorine on the C^N cyclometalating ligands of the complexes results in blue-shifts of the maximum emission wavelengths, and increases in the photoluminescence quantum yields (Φ_PL), phosphorescence lifetimes and energy gaps, compared to the non-fluorinated [Ir(ppy)₂(bpy)]⁺PF₆^? (Ir0). Among them, 2-(2,4-difluorophenyl)pyridine-derived Ir4 shows the maximum blue-shift (514 nm vs. 575 nm for Ir0) and the highest Φ_PL (50.8% vs. 6.5% for Ir0). The complex Ir3 with 2-(4-fluorophenyl)-5-fluoropyridine as C^N ligand exhibits the highest oxygen sensitivity and excellent operational stability in 10 cycles within 4000 s.     

Rhodium and iridium complexes of N-heterocyclic carbenes: Structural investigations and their catalytic properties in the borylation reaction

Bridged and unbridged N-heterocyclic carbene (NHC) ligands are metalated with [Ir/Rh(COD)₂Cl]₂ to give rhodium(I/III) and iridium(I) mono- and biscarbene substituted complexes. All complexes were characterized by spectroscopy, in addition [Ir(COD)(NHC)₂][Cl,I] [COD = 1,5-cyclooctadiene, NHC =  1,3-dimethyl- or 1,3-dicyclohexylimidazolin-2-ylidene] (1, 4), and the biscarbene chelate complexes 12 [(η⁴-1,5-cyclooctadiene)(1,1′-di-n-butyl-3,3′-ethylene-diimidazolin-2,2′-diylidene)iridium(I) bromide] and 14 [(η⁴-1,5-cyclooctadiene)(1,1′-dimethyl-3,3′-o-xylylene-diimidazolin-2,2′-diylidene)iridium(I) bromide] were characterized by single crystal X-ray analysis. The relative σ-donor/π-acceptor qualities of various NHC ligands were examined and classified in monosubstituted NHC-Rh and NHC-Ir dicarbonyl complexes by means of IR spectroscopy. For the first time, bis(carbene) substituted iridium complexes were used as catalysts in the synthesis of arylboronic acids starting from pinacolborane and arene derivatives.     

Palladium-benzimidazolium salt catalyst systems for Suzuki coupling: development of a practical and highly active palladium catalyst system for coupling of aromatic halides with arylboronic acids

Palladium-benzimidazolium salt catalyst systems have been studied for the Suzuki coupling. A different substitutent effect has been uncovered with respect to nitrogen substituents in the benzimidazolium salts from the palladium-imidazolium salt analogs. A practical and highly active palladium catalyst system, PdCl₂/N,N′-dibenzylbenzimidazolium chloride 2, has been identified for the Suzuki coupling of aromatic halides with arylboronic acids. The coupling of a wide array of aromatic halides with arylboronic acids with the PdCl₂-2 catalyst system gave good to excellent yields. The effective palladium loading could be as low as 0.0001 mol% and 0.01-0.1 mol% for iodide and bromide substrates, respectively. The coupling of unactivated aromatic chlorides with arylboronic acids also gave good results using Cs₂CO₃ as base with a 2 mol% palladium loading. The electronic factors from aromatic halides exert a significant influence on the Suzuki coupling catalyzed by the PdCl₂-2 system while the electronic effect from the arylboronic counterparts is negligible. The aromatic halides with modest steric hindrance could also couple smoothly with phenylboronic acids using the PdCl₂-2 catalyst system.     

Recyclable CNT-chitosan nanohybrid film utilized in copper-catalyzed aerobic ipso-hydroxylation of arylboronic acids in aqueous media

A convenient heterogeneous catalytic system consisting of recyclable and reusable carbon nanotube-chitosan nanohybrid film and copper salt was developed for the aerobic ipso-hydroxylation of arylboronic acids. A variety of arylboronic acids bearing electron-withdrawing or electron-donating groups were smoothly transformed at room temperature in water to afford the corresponding phenols in high yields.     

Nouvelle méthode de synthèse d’acides et d’esters arylboroniques par électroréduction de dérivés aromatiques halogénés en présence d’agents boratants

Novel synthesis of arylboronic acids and esters by electroreduction of aromatic halides in the presence of borating agents. A novel strategy for the one-step synthesis of arylboronic acids and esters by an electrochemical coupling reaction is described. It is based on the reductive coupling between the aromatic halides and a borating agent (trialkyl borate or pinacolborane). The reactions are carried out in DMF or THF with the use of sacrificial magnesium or aluminium anodes in a single-compartment cell. Arylboronic acids and esters are obtained with moderate-to-good isolated yields. To cite this article: C. Laza, E. Duñach, C. R. Chimie 6 (2003).     

Stereoselective dioxirane hydroxylations and the synthesis of tripod boronic acid esters

Methyl(trifluoromethyl)dioxirane (TFDO, 1b), a powerful yet selective oxidant, was employed to achieve in high yield the direct stereoselective hydroxylation at tert-CH of cis,cis-1,3,5-trimethylcyclohexane (4), yielding triol 7 bearing all-axial disposition of the three OH groups. Similarly, TFDO oxidation of 1,3- and of 1,4-dimethylcyclohexane gave the corresponding Z-diols 5 and 6, respectively. Triol 7 was a convenient starting material to synthesize a novel borate—that is, 1-bora-2,8,9-trioxa-3,5,7-trimethyladamantane (8)—having a peculiar cage-shaped ‘tripod’ structure. From triol 7, novel tripod arylboronic Brönsted-assisted Lewis acids (BLA) could be obtained, as exemplified by 10a and 10b.     

Wide bite angle diphosphine rhodium complexes: Synthesis, structure, and catalytic 1,4-addition of arylboronic acids to enones

A rhodium complex [ClRh(CO)(L1)] featuring a wide bite angle diphosphine ligand (L1 = 1,3-bis(2-diphenylphosphinomethylphenyl)benzene) has been synthesized and structurally characterized. L1 supports a bite angle (P-M-P angle, β) of 171.4° in the trans-square planar complex. L1 was tested in Rh-catalyzed 1,4-addition reactions of arylboronic acids (six examples) to α,β-unsaturated ketones (five examples). In mixed aqueous/cyclohexane solution at 60 °C, addition reactions proceed in up to quantitative yield with a 1:1 arylboronic acid/enone ratio. Yields as high as 77% can be acquired even when one of the coupling partners is sterically encumbered 2,4,6-trimethylphenylboronic acid.     

Silica chloride: An efficient promoter for oxidation of arylboronic acids to phenols

This work reports simple, highly efficient protocol for the oxidation of arylboronic acids. Various arylboronic acids were selectively and completely converted into their corresponding oxidized phenols using H₂O₂ as an oxidant in presence of catalytic amount of silica chloride. The results show that silica chloride is a suitable and efficient promoter for the oxidation of arylboronic acids. Heterogeneous catalyst, mild reaction conditions, easy availability of the reagent, easy work-up, excellent yield of corresponding phenols, short reaction time and broad substrate scope makes this protocol attractive and a practical alternative to the existing methods.     

Diferric oxo-bridged complexes of a polydentate aminopyridyl ligand: synthesis,structure and catalytic reactivity

The catalytic reactivity of a group of diferric oxo-bridged complexes (1–3) of a tetradentate ligand (bpmen = N,N′-dimethyl-N,N′-bis(2-pyridylmethyl)-1,2-diaminoethane) toward alkane hydroxylation has been evaluated. Among the three complexes, the µ-oxo diiron(III) complex [Fe(bpmen)(µ-O)FeCl₃] (1) has been synthesized for the first time. The complex 1 has been characterized by spectroscopic analysis and X-ray crystallography. At room temperature, the µ-oxo diiron(III) complexes 1–3 have been found to be useful catalysts in hydroxylation of alkanes with m-chloroperbenzoic acid as oxidant. [Fe(bpmen)(µ-O)FeCl₃] (1) has been found to be the most active catalyst. Moreover, the catalytic ability of the complexes in the oxidation of alcohols to ketones with hydrogen peroxide at room temperature has also been investigated.     

Photo-catalytic Staphylococcus aureus inactivation and biofilm destruction with novel bis-tridentate iridium(III) photocatalyst

Bacterial infection is currently a serious challenge globally, causing death of thousands of human beings. New antimicrobial agents with novel mechanism of action are urgently needed. Transition metal complexes have shown great potentials in photodynamic and photocatalytic therapy. Herein, we take full advantage of metal photocatalyst and successfully developed a novel cyclometalated iridium(III) complex (Ir1) with higher biofilm damage efficiency than the clinical antibiotics. Ir1 synergistically generates reactive oxygen species and coenzyme photocatalytic activity with high efficiency under white light irradiation. Combined with these properties, Ir1 exhibited excellent photoinactivation of S. aureus and effectively damaged the biofilm. This work provides a new approach for the development of antibacterial photodynamic therapy.     

Novel iridium complex with carboxyl pyridyl ligand for dye-sensitized solar cells: High fluorescence intensity, high electron injection efficiency?

Novel iridium-based sensitizers Iridium(III) bis[2-phenylpyridinato-N,C^2′]-5-carboxylpicolinate) (Ir1), Iridium(III) bis[2-(naphthalen-1-yl) pyridinato-N,C^2′]-5-carboxyl-picolinate) (Ir2), Iridium(III) bis[2-phenylpyridinato-N,C^2′]-4,4′-(dicarboxylicacid)-2,2′-bipyridine (Ir3) were synthesized for sensitization of mesoscopic titanium dioxide injection solar cells. By changing the ligand, the absorption spectra can be extended and molar extinction coefficient was enhanced. The dye-sensitized nanocrystalline TiO₂ solar cells (DSSCs) based on dye Ir3 showed the best photovoltaic performance: a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 85%, a short-circuit photocurrent density (J_sc) of 9.59 mA cm⁻², an open-circuit photovoltage (V_oc) of 0.552 V, and a fill factor (ff) of 0.54, corresponding to an overall conversion efficiency of 2.86% under AM 1.5 sun light. Moreover, the HOMO and LUMO energy levels tuning can be conveniently accomplished by alternating the ligand. The high oxidative potential of Ir3 enables it to be used along with redox electrolyte and the photovoltage was found to be enhanced greatly.     

Synthesis of Rosavin and its analogues based on a Mizoroki-Heck type reaction

The Rosavin framework could be constructed with either phenylboronic acids, the protected arabinopyranosyl bromide 4 or the protected xylopyranosyl bromide 5, along with allyl O-β-d-glucopyranoside 7 that could be easily prepared based on direct β-glucosidation between allyl alcohol and d-glucose using the immobilized β-glucosidase (EC 3.2.1.21). The key reaction was the Pd(II)-catalyzed Mizoroki-Heck type reaction between allyl β-d-glucopyranoside congeners 9 or 10 and arylboronic acids. Deprotection of the coupling products afforded synthetic Rosavin 1, 4-methoxycinnamyl 6-O-(α-l-arabinopyranosyl)-β-d-glucopyranoside 2, and cinnamyl 6-O-(β-d-xylopyranosyl)-β-d-glucopyranoside 3, which were identical with the natural products in respect to the specific rotation and spectral data.     

Axially chiral C2-symmetric N-heterocyclic carbene (NHC) palladium complexes-catalyzed asymmetric arylation of aldehydes with arylboronic acids

Chiral C₂-symmetric N-heterocyclic carbene (NHC) palladium diaquo complexes 5a–c and the chiral C₂-symmetric NHC-palladium complexes 5d and 5e prepared from (R)-BINAM or H₈-(R)-BINAM could be used as the catalysts for the enantioselective arylation of arylaldehydes with arylboronic acids in which NHC-Pd complex 5a was found to be fairly effective in this reaction to give the corresponding adducts in moderate enantioselectivities along with moderate to good yields.     

A reusable polymer supported copper catalyst for the C–N and C–O bond cross-coupling reaction of aryl halides as well as arylboronic acids

A simple and industrially viable protocol for C–N and C–O coupling was reported here. The polymer supported heterogeneous copper catalyst was prepared from chloromethyl polystyrene using a simple procedure. O-Arylation of substituted phenols with various aryl halides was achieved using this copper catalyst in DMSO medium. This heterogeneous copper catalyst, also efficiently works for the N-arylation of N–H heterocycles with aryboronic acids in methanol. This catalyst was also effective in amination reaction of primary amines with aryl halides as well as arylboronic acids in DMSO medium. The effects of solvent, base and temperature for the O-Arylation and amination reactions were reported. Further, the catalyst can be easily recovered quantitatively by simple filtration and reused up to several times without sufficient loss of its catalytic activity.     

Palladium(II)-N-heterocyclic carbene complex derived from proline towards Suzuki-Miyaura coupling reaction in water at room temperature

Palladium(II)-N-heterocyclic carbene complex 1 derived from proline has been proved to be a highly effective catalyst in the Suzuki-Miyaura coupling reaction of aryl iodides and bromides with arylboronic acids in water at room temperature. The reactions are tolerant towards various functional groups in the substrates. Moreover, the complex 1-catalyzed medium-scale (10.0 mmol) Suzuki-Miyaura reactions were also carried out and it was found that the complex was also effective enough in these cases.     

First synthesis of nitro-substituted 2,2-diphenyl-2H-1-benzopyrans via the ipso-nitration reaction

The first synthesis of a series of nitro-substituted 2,2-diphenyl-2H-1-benzopyrans is reported. Our synthetic approach is based on a linear synthesis in two steps from appropriate brominated 2,2-diphenyl-2H-1-benzopyrans 12-17, which requires the preliminary preparation of bromophenols 7-11. These latter were easily obtained by the reaction of phenols 1-5 with a mild and selective brominating agent tetrabutylammonium tribromide (TBA·Br₃). The key intermediates 12-17 were efficiently elaborated through an univocal classic chromenization between the commercially available 1,1-diphenyl-2-yn-1-ol and the brominated phenols 6-11. The compounds 12-17 so obtained were converted into arylboronic acids 18-23 by a metalation/boronylation sequence, followed by acid hydrolysis. From advanced building blocks 18-23, the introduction of nitro group, which constitutes the ultimate step of our strategy, was achieved by an ipso-nitration reaction using the Crivello's reagent. This highly selective method provides only the ipso-nitrated products 24-29 in moderate to high yield.