Tungsten disulfide (WS2) nanosheets were obtained by exfoliating WS2 bulk crystals in N-methylpyrrolidone by ultrasonication. Gold nanoparticles (GNPs) were synthesized by in-situ ultrasonication of sodium citrate and HAuCl4 while fabricating the WS2 nanosheets. In this way, the GNPs were self-assembled on WS2 nanosheets to form a GNPs/WS2 nanocomposite through interaction between sulfur and gold atoms. The photoelectrochemical response of WS2 nanosheets is significantly enhanced after integration of the GNPs. The GNPs/WS2 nanocomposite was coated onto a glassy carbon electrode (GCE) to construct a sensing interface which then was modified with an antibody against the carcinoembryonic antigen (CEA) to obtain a photoelectrochemical immunosensor for CEA. Under optimized conditions, the decline in relative photocurrent is linearly related to the logarithm of the CEA concentration in the range from 0.001 to 40 ng mL?1. The detection limit is 0.5 pg mL?1 (at S/N =?3). The assay is sensitive, selective, stable and reproducible. It was applied to the determination of CEA in clinical serum samples.
Graphical abstract Schematic presentation of the fabrication of Au/WS2 nanocomposites by in-situ ultrasonication and the procedure for the CEA photoelectrochemical immunosensor preparation, and the photocurrent response towards the carcinoembryonic antigen.
The fucosylated Golgi protein 73 (fuc-GP73) has been used as a criterion to distinguish hepatocellular carcinoma (HCC) from other chronic liver diseases. We describe an amperometric aptasensor for ultrasensitive detection of fuc-GP73 that uses a thiolated aptamer against GP73 as the capture probe, and gold nanoparticles (AuNPs) modified with Avidinlens culinaris agglutinin (A-LCA) as the detection probe. The AuNPs on the surface of a gold electrode provide a large surface for immobilization of A-LCA, so that they can be heavily loaded with biotinylated horse radish peroxidase (B-HRP) via avidin-biotin interactions. This results in enhanced analytical sensitivity. Under optimized conditions and a typical working potential as low as 48 mV (vs. SCE), the dynamic response of the electrode covers the 10 pg·mL?1 to 25 ng·mL?1 fuc-GP73 concentation range, with a 7 pg·mL?1 detection limit (for an S/N ratio of 3). The assay is precise, selective and reproducible. It was applied to the determination of fuc-GP73 in serum.
Graphical abstract Schematic of an electrochemical aptasensor for the determination of fucosylated golgi protein 73 (fuc-gp73) based on the avidin-Lens culinaris agglutinin (A-LCA) and biotinylated horse radish peroxidase (B-HRP). It was applied to serum analysis with good sensitivity, selectivity and reproducibility.
The authors describe a dye-sensitized photoelectrochemical immunoassay for the tumor marker carcinoembryonic antigen (CEA). The method employs the rhodamine dye Rh123 with red color and absorption maximum at 500 nm for spectral sensitization, and a 3D nanocomposite prepared from graphene oxide and MoS2 acting as the photoelectric conversion layer. The nanocomposite with flower-like 3D architectures was characterized by transmission electron microscopy, scanning electron microscopy, X-ray powder diffraction, and UV-vis diffuse reflectometry. A photoelectrochemical sandwich immunoassay was developed that is based on the use of the nanocomposite and based on the specific binding of antibody and antigen, and by using a secondary antibody labeled with Rh123 and CdS (Ab2-Rh123@CdS). Under optimal conditions and at a typical working voltage of 0 V (vs. Hg/HgCl2), the photocurrent increases linearly 10 pg mL?1 to 80 ng mL?1 CEA concentration range, with a 3.2 pg mL?1 detection limit.
Graphical abstract Flower-like GO-MoS2 complex with high efficiency of electron transport was synthesized to construct photoelectrochemical platform. The sandwich-type immunoassay was built on this platform based on specific binding of antigen and antibody. Carcinoembryonic antigen in sample was detected sensitively by using sensitization of rhodamine dye Rh123 as signal amplification strategy.
The authors describe a sensitive surface-enhanced Raman scattering (SERS)-based aptasensor for the detection of the food pathogen Vibrio parahaemolyticus. Nanostructures consisting of Fe3O4@Au particles wrapped with graphene oxide (GO) were used both as SERS substrates and separation tools. A first aptamer (apt 1) was immobilized on the Fe3O4@Au/GO nanostructures to act as a capture probe via the affinity binding of aptamer and V. parahaemolyticus. A second aptamer (apt-2) was modified with the Raman reporter molecule TAMRA to act as a SERS sensing probes that binds to the target the same way as the Fe3O4@Au/GO-apt 1. The sandwich formed between Fe3O4@Au/GO-apt 1/V. parahaemolyticus and apt 2-TAMRA can be separated with the aid of a magnet. The concentration of V. parahaemolyticus can be quantified by measurement of the SERS intensity of TAMRA. Under optimal conditions, the signal is linearly related to the V. parahaemolyticus concentration in the range between 1.4 × 102 to 1.4 × 106 cfu·mL?1, with a detection limit of 14 cfu·mL?1. Recoveries ranging from 98.5% to 105% are found when analyzing spiked salmon samples. In our perception, the assay described here is a useful tool for quantitation of V. parahaemolyticus in real samples.
Graphical abstract GO wrapped Fe3O4@Au nanostructures were synthesized as the substrate and modified with with a first aptamer (apt 1) to capture V. parahaemolyticus. TAMRA labelled aptamer 2 was then used as signal probe. The V. parahaemolyticus concentrations are closely related to the Raman intensity of TAMRA.
An affinity-based protocol is described for the detection of Staphylococcus aureus (S. aureus). It is utilizing teicoplanin-functionalized magnetic beads as carriers. Teicoplanin, which binds to the walls of cells of S. aureus via five hydrogen bonds, acts as the recognition agent. Captured S. aureus is magnetically separated from the sample matrix and then specifically lysed by lysostaphin which cleaves the cross-linking pentaglycine bridges of peptidoglycan in the cell wall. Lastly, S. aureus is quantified via the inhibitory effect of released intracellular catalase on a chemiluminescent (CL) system composed of peroxidase, luminol, H2O2 and p-iodophenol because catalase decomposes H2O2. S. aureus can be detected with CL response in the 140 to 1.4?×?107 CFU·mL?1 concentration range and a detection limit as low as 47 CFU·mL?1 at a signal-to-noise ratio of 3. The method was evaluated by analyzing spiked samples including milk, human urine and saline injection solutions. The reliability was demonstrated by a recovery test and by comparison with a conventional plate counting method.
Graphical abstract An antibiotic-affinity protocol is developed to detect Staphylococcus aureus (S. aureus) by utilizing teicoplanin-functionalized magnetic beads (Teic-MBs) as carriers. S. aureus can be quantified by measuring the inhibition of luminol chemiluminescence (CL) signal by intracellular catalase.
We describe a magnetic nanocomposite that consists of Fe3O4/carbon nanosphere/polypyrrole (Fe3O4/CNS/PPy). The synthesized nanocomposites were characterized by scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared spectroscopy. The nanocomposite was successfully applied to extract of the polycyclic aromatic hydrocarbons (PAHs) from water samples. Compared to Fe3O4/PPy, the Fe3O4/CNS/PPy nanocomposite exhibits improved properties in terms of extraction. The amount of adsorbent, salt effect, extraction time, desorption time, type, and the volume of desorption solvent were optimized. Following the desorption of the extracted analytes, the PAHs (i.e., naphthalene, 2-methylnaphthalene, 2-bromonaphthalene, fluorene, and anthracene) were quantified by gas chromatography–flame ionization detector. The PAHs can be determined in 0.05–100.00 ng mL?1 concentration range, with limits of detection (at an S/N ratio of 3) ranging from 0.01 to 0.05 ng mL?1. The repeatability of the method was investigated with relative standard deviations of lower than 9.9% (n = 5). Also, the recoveries from spiked real water samples were in the range of 88.9–99.0%. The results indicate that the novel material can be successfully applied for the extraction and analysis of PAHs from water samples. 相似文献
We describe a label-free electrochemical immunosensor for the carcinoembryonic antigen (CEA). It is based on a nanocomposite consisting of electrochemically reduced graphene oxide, gold nanoparticles (AuNPs), and poly(indole-6-carboxylic acid). Coupled to nanoparticle-amplification techniques and modified with ionic liquid (IL), this immunoassay shows high sensitivity and good selectivity for CEA. At the best working voltage of 0.95 V (vs. Ag/AgCl), the lower detection limit is 0.02 ng·mL?1, and the response to CEA is linear in the range from 0.02 to 90 ng·mL?1. The method was applied to the determination of CEA in spiked serum samples and gave recoveries in the range from 98.5 % to 102 %.
Graphical abstract A label-free electrochemical immunosensor was fabricated for the carcinoembryonic antigen (CEA) with a detection limit of 0.02 ng·mL?1. It is based on a nanocomposite consisting of electrochemically reduced graphene oxide (erGO), gold nanoparticles (Au NP), and poly(indole-6-carboxylic acid) (PICA).
A polydopamine-based molecularly imprinted polymer was deposited on the surface of magnetite (ferroferric oxide) nanoparticles (Fe3O4@PDA MIPs) and is shown to be an efficient and fairly specific sorbent for the extraction of various ochratoxins. The MIPs were characterized by IR spectroscopy and transmission electron microscopy. The adsorption capacities, evaluated through the langmuir adsorption isotherm model, are 1.8, 0.23 and 0.17 mg·g?1 for ochratoxin A, ochratoxin B and ochratoxin C, respectively. Parameters such as the amount of magnetic MIPs, pH value, time for ultrasonication, elution solvent and volume were optimized. Following desorption from the MIP with acetonitrile, the ochratoxins were quantified by HPLC with fluorometric detection. Under optimal experimental conditions, the calibration plots are linear in the range of 0.01–1.0 ng·mL?1 of OTA, 0.02–2.0 ng·mL?1 of OTB, and 0.002–0.2 ng·mL?1 of OTC. The LODs are between 1.8 and 18 pg·mL?1, and the recoveries from spiked samples are 71.0% - 88.5%, with RSDs of 2.3–3.8% in case of rice and wine samples. The MIPs can be re-used for at least 7 times.
Graphical abstract Schematic of the preparation of a magnetic molecularly imprinted polymer based on self-polymerization of dopamine in weakly alkaline solution. Ochratoxins are recognized owing to homologous cavities in the MIPs, and quantified by HPLC after desorption with acetonitrile.
A series of [1,2,4]triazolo[4,3-a]pyridine derivatives bearing a sulfide substructure was designed, synthesized and characterized via 1H·NMR, 13C·NMR, IR and elemental analyses. Bioassay Results indicated some of the derivatives displayed good fungicidal activity on Rhizoctonia cerealis, moderated insecticidal activity against Plutella xylostella and good insecticidal activity on Helicoverpa armigera. The inhibitory effects of compounds 4g and 4u against Rhizotonia cerealis were 70.9% at 50 μg mL?1; the IC50 values of compounds 4d and 4s against Plutella xylostella were 43.87 and 50.75 μg mL?1, respectively. And the IC50 values of compounds 4d, 4q, and 4s on Helicoverpa armigera were 58.3, 77.14 and 65.31 μg mL?1, respectively, which were better than that of commercial chlorpyrifos (103.77 μg mL?1). 相似文献
Diphenyl diselenide was immobilized on chitosan loaded with magnetite (Fe3O4) nanoparticles to give an efficient and cost-effective nanosorbent for the preconcentration of Pb(II), Cd(II), Ni(II) and Cu(II) ions by using effervescent salt-assisted dispersive magnetic micro solid-phase extraction (EA-DM-μSPE). The metal ions were desorbed from the sorbent with 3M nitric acid and then quantified via microflame AAS. The main parameters affecting the extraction were optimized using a one-at-a-time method. Under optimum condition, the limits of detection, linear dynamic ranges, and relative standard deviations (for n?=?3) are as following: Pb(II): 2.0 ng·mL?1; 6.3–900 ng·mL?1; 1.5%. Cd(II): 0.15 ng·mL?1; 0.7–85 ng·mL?1, 3.2%; Ni(II): 1.6 ng·mL?1,.6.0–600. ng·mL?1, 4.1%; Cu(II): 1.2 ng·mL?1, 3.0–300 ng·mL?1, 2.2%. The nanosorbent can be reused at least 4 times.
Graphical abstract Fe3O4-chitosan composite was modified with diphenyl diselenide as a sorbent for separation of metal ions by effervescent salt-assisted dispersive magnetic micro solid-phase extraction.
A glassy carbon electrode (GCE) was modified with gold nanoparticles (AuNPs) coated on monolayer graphene (AuNP/MG) by direct in situ sputtering of AuNPs on CVD-generated graphene. This process avoids complicated polymer transfer and polymer cleaning processes and affords AuNPs with a clean surface. The monolayer graphene is ductile and well dispersed. The clean surface of the AuNPs renders this sensor superior to GCEs modified with AuNPs on reduced graphene oxide in terms of the amperometric non-enzymatic determination of hydrogen peroxide. The detection limit is 10 nM (S/N = 3) at 0.55 V (vs. SCE), which is lower than that for similar methods, and the response time is as short as 2 s. Another attractive feature of the sensor is its feasibility for large-scale production via CVD and sputtering.
Graphical abstract Gold nanoparticles deposited onto monolayered graphene generated by chemical vapor deposition (CVD) are used for electrochemical sensing of H2O2, with the detection limit of 10 nM (S/N = 3) and response time of less than 2 s.
Medium pressure (~ 10 torr) low frequency (3–5 kHz) glow discharge (LFGD) plasmas were applied to treat wheat (Triticum aestivum) seeds to investigate the effects on water absorption, seed germination rate, seedling growth and yield. The LFGD plasmas were produced with air and air/O2. Optical emission spectroscopic diagnostic methods were revealed that the \({\text{N}}_{2} \left( {{\text{C}}^{3}\Pi _{\text{u}} - {\text{B}}^{3}\Pi _{\text{g}} } \right)\), \({\text{N}}_{2}^{ + } \left( {{\text{B}}^{2}\Sigma _{\text{u}}^{ + } - {\text{X}}^{2}\Sigma _{\text{g}}^{ + } } \right)\) and \({\text{N}}_{2} \left( {{\text{B}}^{3}\Pi _{\text{g}} - {\text{A}}^{3}\Sigma _{\text{u}}^{ + } } \right)\) produced with air, and O species were produced along with nitrogen species with air/O2 plasmas, respectively. The SEM images were revealed that the surface architectures and functionalities of the seeds were modified due to plasma treatments. Water absorption was found to increase with treatment time. 6 min treatment was provided 95–100% seed germination. The plants grown from treated seeds for 3 and 9 min duration by air/O2 plasma were showed the highest growth activity and dry matter accumulation. Total chlorophyll contents of the leaves, longest spikes and number of spikes/spikelet were also increased. The wheat yield was increased ~ 20% over control by 6 min treatment with air/O2 plasma. Overall results revealed that LFGD plasmas can significantly change seed surface architecture, water absorption, germination rate, seedling growth and yield of wheat. 相似文献
A lateral flow assay for rapid, simple and efficient determination of L. monocytogenes is presented. A monoclonal antibody (mAb) 1C1 against the peptide from P60 protein of L. monocytogenes was prepared and labeled with gold nanoparticles (AuNPs). The mAb 1C1 was paired with the mAb 10E7 against the P60 protein of all the Listeria spp. and used as a capture bioligand in a lateral flow assay. The AuNP-based strip test can detect the supernatant of eight common L. monocytogenes serotypes including 1/2a, 1/2b, and 4b with an equivalent detection limit of 3.7 × 106 CFU?mL?1 but does not detect four other Listeria spp. (L. ivanovii, L. innocua, L. welshimeri, and L. grayi). There was no cross-reactivity with six other Gram-negative and Gram-positive bacteria. The method was applied to the quantification of L. monocytogenes species in spiked milk samples within 13 h.
Graphical abstract Monoclonal antibody (mAb) 1C1 was prepared against the peptide from P60 protein of Listeria monocytogenes. The gold nanoparticle (AuNP) based strip sensor detects all the eight tested Listeria monocytogenes serotypes.
B-Nb2O5 was recrystallized from commercially available oxide, and XRD analyses indicated that it is stable in contact with solutions over the pH range 0 to 9, whereas solid polyniobates such as Na8Nb6O19?13H2O(s) appear to predominate at pH>9. Solubilities of the crystalline B-Nb2O5 were determined in five NaClO4 solutions (0.1≤Im/mol?kg?1≤1.0) over a wide pH range at (25.0±0.1)?°C and at 0.1 MPa. A limited number of measurements were also made at Im=6.0 mol?kg?1, whereas at Im=1.0 mol?kg?1 the full range of pH was also covered at (10, 50 and 70)?°C. The pH of these solutions was fixed using either HClO4 (pH≤4) or NaOH (pH≥10) and determined by mass balance, whereas the pH on the molality scale was measured in buffer mixtures of acetic acid?+?acetate (4≤pH≤6), Bis-Tris (pH≈7), Tris (pH≈8) and boric acid?+?borate (pH≈9). Treatment of the solubility results indicated the presence of four species, \(\mathrm{Nb(OH)}_{n}^{5-n}\) (where n=4–7), so that the molal solubility quotients were determined according to:
and were fitted empirically as a function of ionic strength and temperature, including the appropriate Debye-Hückel term. A Specific Interaction Theory (SIT) approach was also attempted. The former approach yielded the following values of log?10Ksn (infinite dilution) at 25?°C: ?(7.4±0.2) for n=4; ?(9.1±0.1) for n=5; ?(14.1±0.3) for n=6; and ?(23.9±0.6) for n=7. Given the experimental uncertainties (2σ), it is interesting to note that the effect of ionic strength only exceeded the combined uncertainties significantly in the case of log?10Ks6 to Im=1.0 mol?kg?1, such that these values may be of use by defining their magnitudes in other media. Values of ΔfGo, ΔfHo, So and \(C_{p}^{\mathrm{o}}\) (298.15 K, 0.1 MPa) for each hydrolysis product were calculated and tabulated.
The authors describe a colorimetric method for the determination of the staphylococcal enterotoxin B (SEB) that also allows for visual readout. The assay is based on the growth of gold nanoparticles (AuNPs) mediated by a hemin/G-quadruplex DNAzyme which generates a color change from red to blue in the presence of SEB. The method is enzyme-free and does not require a label. The kinetics of the formation of the AuNPs is controlled by the hemin/G-quadruplex DNAzyme and this is key to the signal generation mechanism. In the presence of SEB, the reactions between aptamer and target modulated the amount of single probe G strands that form DNAzyme capable of consuming hydrogen peroxide. The growth process of AuNPs is influenced by the resulting concentration of H2O2 and leads to the color change. Under optimal conditions, a linear relationship exists between absorbance and SEB concentration in the range from 0.1 to 500 pg·mL￣1 which covers the clinically relevant range. In case of visual detection, the lower limit of detection is 1 pg·mL?1. The assay described here is sensitive, comparably inexpensive and can detect SEB rapidly without the need for sophisticated equipment. In our perception, the method has a wide scope in that it may be adapted to various nucleic acids, proteins and other biomolecules if respective aptamers are available.
A molecularly imprinted polymer (MIP) and a nanocomposite prepared from gold nanoparticles (AuNP) and poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) (PEDOT:PSS) were deposited on a screen-printed carbon electrode (SPCE). The nanocomposite was prepared by one-pot simultaneous in-situ formation of AuNPs and PEDOT:PSS and was then inkjet-coated onto the SPCE. The MIP film was subsequently placed on the modified SPCE by co-electrodeposition of o-phenylenediamine and resorcinol in the presence of the antibiotic nitrofurantoin (NFT). Using differential pulse voltammetry (DPV), response at the potential of ~ 0.1 V (vs. Ag/AgCl) is linear in 1 nM to 1000 nM NFT concentration range, with a remarkably low detection limit (at S/N?=?3) of 0.1 nM. This is two orders of magnitude lower than that of the control MIP sensor without the nanocomposite interlayer, thus showing the beneficial effect of AuNP-PEDOT:PSS. The electrode is highly reproducible (relative standard deviation 3.1% for n?=?6) and selective over structurally related molecules. It can be re-used for at least ten times and was found to be stable for at least 45 days. It was successfully applied to the determination of NFT in (spiked) feed matrices and gave good recoveries.
Graphical abstract Schematic representation of a voltammetric sensor for the determination of nitrofurantoin. The sensor is based on a screen-printed carbon electrode (SPCE) modified with an inkjet-printed gold nanoparticles-poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) nanocomposite and a molecularly imprinted polymer.
An ion of m/z 110.06036 (ion formula [C6H8NO]+; error: 0.32 mDa) was observed in the collision induced dissociation tandem mass spectrometry experiments of protonated N-(3-aminophenyl)benzamide, which is a rearrangement product ion purportedly through nitrogen-oxygen (N–O) exchange. The N–O exchange rearrangement was confirmed by the MS/MS spectrum of protonated N-(3-aminophenyl)-O18-benzamide, where the rearranged ion, [C6H8NO18]+ of m/z 112 was available because of the presence of O18. Theoretical calculations using Density Functional Theory (DFT) at B3LYP/6-31 g(d) level suggest that an ion-neutral complex containing a water molecule and a nitrilium ion was formed via a transition state (TS-1), followed by the water molecule migrating to the anilide ring, eventually leading to the formation of the rearranged ion of m/z 110. The rearrangement can be generalized to other protonated amide compounds with electron-donating groups at the meta position, such as, –OH, –CH3, –OCH3, –NH(CH3)2, –NH-Ph, and –NHCOCH3, all of which show the corresponding rearranged ions in MS/MS spectra. However, the protonated amide compounds containing electron-withdrawing groups, including –Cl, –Br, –CN, –NO2, and –CF3, at the meta position did not display this type of rearrangement during dissociation. Additionally, effects of various acyl groups on the rearrangement were investigated. It was found that the rearrangement can be enhanced by substitution on the ring of the benzoyl with electron-withdrawing groups.
It is known that gold nanoparticles (AuNPs) possess peroxidase-like activity. They can catalyze the oxidation of 3,3,5,5-tetramethylbenzidine by H2O2 which leads to a color change from red to blue. It is shown here that the peroxidase-like activity of AuNPs can be inhibited by passivating its surface passivation with a ssDNA aptamer against sulfadimethoxine. If, however, the target molecule (sulfadimethoxine) is present, the aptamer is desorbed from the AuNPs surface, and this results in the reactivation of the catalytic property of the AuNPs. The color change of the solution (from purple to blue) is related to the analyte concentration, and this can be judged visually or by UV-visible absorptiometry at 650 nm. The assay, under optimized conditions, has a detection limit of 10 ng·mL?1 of sulfadimethoxine, and the calibration plot is linear over a rather wide concentration range (0.01–1000 μg·mL?1). The assay can be performed within <15 min, is sensitive, and therefore is well suited for fast screening in food analysis. Conceivably, it can be extended to many other small analytes for which aptamers are available.
Graphical abstract Aptamer based photometric assay for sulfadimethoxine(SDM) based on the inhibition and reactivation of the peroxidase-like activity of gold nanoparticles (AuNPs) was performed with a rather wide linear range (0.01–1000 μg?mL?1) and low detection limit of 10 ng?mL?1.
Two cis-dioxomolybdenum(VI) complexes [MoO2L] (L: L1, 2 and L: L2, 3) in a phenol-based sterically encumbered N2O2 ligand environment have been synthesized, and their crystallographic characterizations are reported. The orange crystals of 2 are monoclinic, space group P21/a with unit cell dimensions as a=16.2407(17) Å, b=7.2857(8) Å, c=18.400(2) Å, β=98.002(9)°, Z=4, and dcal=1.486 g cm?3. The light orange crystals of 3, however, are orthorhombic, space group, Pbcn, with unit cell dimensions a=8.3110(12) Å, b=12.637(3) Å, c=34.673(5) Å, Z=4, and dcal=1.187 g cm?3. The structures were refined by a full-matrix least-squares procedure on F2 to a final R=0.046 (0.055 for 3) using 4944 (3677) all independent data. In both the cases, the Mo atom exists in a distorted octahedral geometry defined by a N2O4 donor set, which features a cis-Mo(–O)2 and a trans-Mo(OPh)2 arrangement. Compound 2 undergoes a quasireversible one-electron reduction at ?1.3 V vs Ag/AgCl reference due to MoVIO2/MoVO2 electron transfer and thus providing a rare example of steric solution to the comproportionation–dimerization problem encountered frequently in the development of valid biomimetic models for the active sites of oxomolybdenum enzymes. 相似文献
The oxygen-deficient Sr0.75Y0.25Co0.9Ru0.1O3?δ (SYCR) cathode is systematically evaluated for the application of solid oxide fuel cells. X-ray diffraction analysis indicates that SYCR presents a tetragonal structure with space group of I4/mmm (139). In the measured high oxygen partial pressure (pO2) region (0.01–0.21 atm), the conductivity increases with increasing pO2 because of the oxygen vacancy annihilation and hole creation, relating to a general p-type semiconducting mechanism. To get an insight into the rate-limiting step of SYCR cathode, behaviors of individual polarization resistance (R1 and R2) are investigated in different pO2. The obtained fitting results reveal that R1 is nearly independent on the pO2, while R2 presents a (pO2)?0.5 dependence. At 800 °C, SYCR cathode exhibits an Rp value of 0.14 Ω cm2, moreover, when using the wet hydrogen (～ 3% H2O) as fuel and ambient air as oxidant, the maximum power density of single cell Ni-YSZ (yttria-stabilized zirconia)|YSZ|SYCR reaches 452.9 W cm?2. 相似文献
