Assembly immobilized palladium(0) on carboxymethylcellulose/Fe3O4 hybrid: An efficient tailor‐made magnetically catalyst for the Suzuki–Miyaura couplings

The Pd nanoparticles (Pd NPs) embedded on magnetically retrievable carboxymethylcellulose/Fe₃O₄ (Pd⁰@CMC/Fe₃O₄) organic/inorganic hybrid were prepared via the conventional simple process. The presence of the hydroxyl and carboxyl groups within the framework of the magnetic hybrid enables the facile preparation and stabilization of Pd NPs in this organic/inorganic hybrid. This hybrid catalyst was very effective in the Suzuki – Miyaura reaction of a variety of aryl halides with arylboronic acid to afford excellent product yields. The catalyst showed good stability and could be easily recovered with an external magnetic field and reused for several times without a significant loss in its catalytic activity. Furthermore, the Pd⁰@CMC/Fe₃O₄ hybrid catalyst was fully characterized by UV–Vis, FT–IR, XRD, SEM, EDX, TEM, XPS and TGA techniques. The hot filtration test suggests that a homogeneous mechanism is operative in Suzuki – Miyaura reaction.     

[Cu(bpdo)2·2H2O]2+-supported SBA-15 nanocatalyst for efficient one-pot synthesis of benzoxanthenone and benzochromene derivatives

A novel [Cu(bpdo)₂·2H₂O]²⁺-supported SBA-15 catalyst (bpdo = 2,2′-bipyridine,1,1′-dioxide) was prepared by the impregnation method. The catalyst was characterized by XRD, TEM, and BET nitrogen adsorption–desorption method, FT-IR, UV–vis, and chemical analysis. XRD patterns and TEM analysis of [Cu(bpdo)₂·2H₂O]²⁺/SBA-15 showed highly ordered hexagonal mesoporous silica, even after immobilization. Also, nitrogen adsorption–desorption isotherms exhibited type-IV isotherms and H1 hysteresis loops according to the IUPAC classification of mesoporous materials. This green support was tested for the synthesis of benzoxanthenone and benzochromene derivatives under solvent-free conditions, with high yield of products via a simple experimental and work-up procedure.     

γ-Ray synthesis of starch-stabilized silver nanoparticles with antibacterial activities

Silver nanoparticles (Ag NPs) are fabricated through γ-irradiation reduction of silver ions in aqueous starch solutions. The UV–vis analyses show smaller sizes of Ag NPs produced, with higher yields, as the irradiation doses and/or Ag⁺ concentrations are increased. Higher concentrations of starch enhance the yields of Ag NPs, with no significant effects on their size. The most economical Ag NPs are produced at 5 kGy γ-irradiation of a 2×10⁻³ M solution of AgNO₃ containing 0.5% starch. They show a relatively narrow size distribution, indicated by TEM and its corresponding size distribution histogram. The XRD pattern confirms the face-centered cubic (fcc) Ag NPs embedded in starch molecules. Interactions between these nanoparticle surfaces and starch oxygen atoms are indicated by FT–IR. Antibacterial activities of Ag NPs against Escherichia coli appear dependent on the γ-ray doses applied.     

Physical and electrochemical characterizations of nanostructured Pd/C and PdNi/C catalysts for methanol oxidation

Pd and PdNi nanoparticles supported on Vulcan XC-72 carbon were prepared by a chemical reduction with formic acid process. The catalysts were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), cyclic voltammetry, and chronoamperometry. The results showed that the Pd and PdNi nanoparticles, which were uniformly dispersed on carbon, were 2–10 nm in diameters. The PdNi/C catalyst has higher electrocatalytic activity for methanol oxidation in alkaline media than a comparative Pd/C catalyst and shows great potential as less expensive electrocatalyst for methanol electrooxidation in alkaline media in direct methanol fuel cells.     

Synthesis of coin-like hollow carbon and performance as Pd catalyst support for methanol electrooxidation

The coin-like hollow carbon (CHC) has been synthesized by only using ethanol as the carbon source with a novel Mg/NiCl₂ catalytic system via a facile solvothermal method for the first time. The CHC synthesized at optimized conditions shows an average thickness of less than 154 nm and the coin diameter of 1–3 μm. The CHC is characterized by SEM, TEM, XRD and electrochemical techniques. Pd on CHC (denotes as Pd/CHC) electrocatalysts are prepared for methanol oxidation in alkaline media. The Pd/CHC electrocatalyst gives a mass activity of 2930 A g⁻¹ Pd for methanol oxidation against 870 A g⁻¹ Pd on Pd/C electrocatalyst. One main reason for the higher mass activity of the Pd/CHC is the higher electrochemical active surface area (EASA) of the Pd/CHC.     

Remediation of azo-dyes based toxicity by agro-waste cotton boll peels mediated palladium nanoparticles

The present study reports an environmental benign route for the synthesis of palladium nanoparticles (Pd NPs) using agro-waste empty cotton boll peels aqueous extract for the first time. Surface Plasmon Resonance (SPR) band in absorption spectrum of Pd NPs at 275 nm confirmed the formation of Pd NPs by using UV–Vis spectroscopy. Crystalline nature of Pd NPs was confirmed by powder XRD analysis. Size and morphology was studied by transmission electron microscopy (TEM). The cotton peels extract acted as a source of phytochemicals which primarily reduced Pd⁺² to Pd⁰ nanoparticles (Pd NPs) and imparted stability of Pd NPs by surface capping. The characteristic functional groups of phytochemicals in extract and capped Pd NPs surfaces were identified by FT-IR analysis. Catalytic activity of the synthesised Pd NPs was checked against reduction of hazardous azo-dyes such as Congo red, Methyl orange, Sunset yellow and Tartrazine with NaBH₄ as electron donors. Pd NPs catalysed reduction of all azo-dyes by NaBH₄ in aqueous medium was monitored by UV–visible spectroscopy where Pd NPs mediated transfer of electrons from NaBH₄ to azo-dyes as carrier. The synthesized Pd NPs acted as a good catalyst and could be a promising material in degrading toxic azo-dyes from industrial effluents and wastewater.     

Synthesis of a polymer-capped palladium nanoparticles and its application as a reusable catalyst in oxidative coupling reaction of α-hydroxyketones and 1,2-diamines for preparation of pyrazines and quinoxalines

A novel method for the synthesis of pyrazines and quinoxalines has been developed using α-hydroxyketones and 1,2-diamines in the presence of cross-linked poly(4-vinylpyridine)-stabilized Pd(0) nanoparticles, [P4-VP]-PdNPs. The catalyst was easily prepared and characterized using various techniques such as FT-IR and UV–Vis spectroscopy, AAS, TEM, FESEM, EDX analysis and XRD. The results confirm a good dispersion of palladium nanoparticles on the polymer support. The catalyst displayed good catalytic activity when applied to the synthesis of quinoxalines via condensation of α-hydroxyketones with 1,2-diamines. A few pyrazine derivatives and various quinoxalines are prepared via coupling reaction of α-hydroxyketones and 1,2-diamines in high–excellent yields (81–99%) with short reaction times. The quinoxalines products were characterized by FT-IR, ¹H and ¹³C NMR spectroscopy, and the physical properties were compared to the literature values of known compounds. The advantages of the present method over conventional classical methods are rapid and very simple work-up, and the catalyst is reusable many times without a significant loss in its activity.     

New bis(N‐heterocyclic carbene) palladium complex immobilized on magnetic nanoparticles: as a magnetic reusable catalyst in Suzuki‐Miyaura cross coupling reaction

A new bis(N ‐heterocyclic carbene) (NHC) palladium complex supported on silica coated magnetic nanoparticles (MNPs) was prepared using the reaction of synthesized Pd‐NHC complex with MNPs. The Pd‐NHC complex was prepared using the reaction of a hydroxyl‐functionalized bis‐imidazolium ionic liquid. The Pd‐NHC organometallic complex was used as a heterogeneous recyclable and active catalyst in the Suzuki‐Miyaura reaction and various aryl halides were coupled with arylboronic acids in order to synthesize diverse biaryls in good to excellent yields. The prepared catalyst was characterized by use of some different microscopic and spectroscopic techniques including elemental analysis, FT‐IR spectroscopy, diffuse reflectance UV–Vis spectrophotometery, scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM) and X‐ray diffraction (XRD). The Pd‐NHC catalyst system is a magnetic reusable catalyst and it can be separated from the reaction mixture using an external magnetic field. The catalyst was reusable in the Suzuki‐Miyaura coupling reaction at least for 6 times without significant decreasing in its catalytic activity.     

Thermal decomposition of [bis(salicylaldehydato)cadmium(II)] to CdS nanocrystals

The present investigation reports, the novel synthesis of nanocrystals CdS using thermal decomposition of [bis(salicylaldehydato)cadmium(II)], as a new precursor, and elemental sulfur in oleylamine. The as-synthesized CdS crystals have diameters about 10 nm. The products were characterized by X-ray diffraction (XRD) transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet–visible (UV–Vis) spectroscopy and Fourier transformed infrared (FT-IR) spectra. The results of this paper show that the shape and size of cadmium sulfide nanocrystals can be controlled systematically by adjusting certain reaction parameters, such as the reactant concentration, the reaction temperature and the reaction time. Cadmium sulfide nanoparticles and nanorods with different lengths have been successfully prepared.     

Biosynthesis of Pd/MnO2 nanocomposite using Solanum melongena plant extract and its application for the one‐pot synthesis of 5‐substituted 1H‐tetrazoles from aryl halides

In this work, for the first time, Solanum melongena plant extract was used for the green synthesis of Pd/MnO₂ nanocomposite via reduction osf Pd(II) ions to Pd(0) and their immobilization on the surface of manganese dioxide (MnO₂) nanoparticles (NPs) as an effective support. The synthesized nanocomposite were characterized by various analytical techniques such as Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive X‐ray spectroscopy (EDS) and UV–Vis spectroscopy. The catalytic activity of Pd/MnO₂ nanocomposite was used as a heterogeneous catalyst for the one‐pot synthesis of 5‐substituted 1H‐tetrazoles from aryl halides containing various electron‐donating or electron‐withdrawing groups in the presence of K ₄ [Fe (CN) ₆ ] as non‐toxic cyanide source and sodium azide. The products were obtained in good yields via a simple methodology and easy work‐up. The nanocatalyst can be recycled and reused several times with no remarkable loss of activity.     

Efficient and selective oxidation of alcohols in water employing palladium supported nanomagnetic Fe3O4@hyperbranched polyethylenimine (Fe3O4@HPEI.Pd) as a new organic–inorganic hybrid nanocatalyst

Palladium immobilized magnetic nanoFe₃O₄@hyperbranched polyethylenimine (Fe₃O₄@HPEI.Pd) was prepared according to a simple and cost effective pathway and it was employed as a new efficient and selective organic–inorganic hybrid nanocatalyst for the aqueous oxidation of primary and secondary alcohols to their corresponding products in good yields applying oxone (potassium hydrogen monopersulfate) and H₂O₂ as an oxidant at room temperature. Moreover, the catalytic system was reused at least 13 times without significant loss of activity. The complete characterization of this efficient nanocatalyst was investigated by FTIR, UV–Vis, TEM, SEM, XRD, TGA, VSM, ICP and EDX techniques.     

Surfactant enhanced lipase containing films characterized by confocal laser scanning microscopy

An environmentally benign method for the synthesis of noble metal nanoparticles has been reported using aqueous solution of gum kondagogu (Cochlospermum gossypium). Both the synthesis, as well as stabilization of colloidal Ag, Au and Pt nanoparticles has been accomplished in an aqueous medium containing gum kondagogu. The colloidal suspensions so obtained were found to be highly stable for prolonged period, without undergoing any oxidation. SEM–EDXA, UV–vis spectroscopy, XRD, FTIR and TEM techniques were used to characterize the Ag, Au and Pt nanoparticles. FTIR analysis indicates that –OH groups present in the gum matrix were responsible for the reduction of metal cations into nanoparticles. UV–vis studies showed a distinct surface plasmon resonance at 412 and 525 nm due to the formation of Au and Ag nanoparticles, respectively, within the gum network. XRD studies indicated that the nanoparticles were crystalline in nature with face centered cubic geometry. The noble metal nanoparticles prepared in the present study appears to be homogeneous with the particle size ranging between 2 and 10 nm, as evidenced by TEM analysis. The Ag and Au nanoparticles formed were in the average size range of 5.5 ± 2.5 nm and 7.8 ± 2.3 nm; while Pt nanoparticles were in the size range of 2.4 ± 0.7 nm, which were considerably smaller than Ag and Au nanoparticles. The present approach exemplifies a totally green synthesis using the plant derived natural product (gum kondagogu) for the production of noble metal nanoparticles and the process can also be extended to the synthesis of other metal oxide nanoparticles.     

Preparation of monometallic (Pd,Ag) and bimetallic (Pd/Ag,Pd/Ni,Pd/Cu) nanoparticles via reversed micelles and their use in the Heck reaction

The metal nanoparticles (NPs) have been prepared using a water-in-oil microemulsion system of water/dioctyl sulfosuccinate sodium salt (aerosol-OT, AOT)/isooctane at 25 °C. Since the NPs produced in this system can endure forcing conditions (100 °C), this system has been used for the synthesis of nano-catalysts in the Heck reactions. FE-SEM, DLS, and UV/vis analyses have been used to characterize the surface morphology, size, and proof of the formation of all the prepared metal NPs, respectively. In addition, the effects of some reaction parameters (here, bases and solvents) were optimized. Differences in the catalytic properties of the synthesized NPs have also been investigated. Consequently, the Pd/Cu (4:1) bimetallic NP showed the highest activity in the C–C coupling reaction of the iodobenzene with the styrene, thus it is employed as the superior catalyst in this study. Therefore, the Pd/Cu (4:1) bimetallic NPs were further investigated using TEM and XRD analyses. This catalyst system is also reusable for six runs with very negligible reduction in the efficiency.     

Green synthesis of plant-stabilized Au nanoparticles for the treatment of gastric carcinoma

In this study, gold nanoparticles (AuNPs) were green synthesized using plant extract. The obtained nanoparticles (Au NPs) were characterized by advanced physical and chemical techniques like TEM, FTIR, UV–vis, SEM, XRD and EDX. SEM image displayed the quasi-spherical shaped nanoparticles of mean diameter 20–50 nm. All the particles were of uniform shape and texture. From the XRD pattern, four distinct diffraction peaks at 38.2°, 44.2°, 64.7° and 77.4° are indexed as (1 1 1), (2 0 0), (2 2 0) and (3 1 1) planes of fcc metallic gold. The in vitro cytotoxic and anti-gastric carcinoma effects of biologically synthesized Au NPs against cancer cell lines were assessed. The IC₅₀ of the Au NPs were 192, 149, 76 and 85 µg/mL against NCI-N87, MKN45, GC1401 and GC1436 gastric cancer cell lines. The anti-gastric carcinoma properties of the Au NPs could significantly remove the cancer cell lines in a time and concentration-dependent manner. So, the findings of the recent research show that biologically synthesized Au NPs might be used to cure cancer.     

Hollow nanoshell-sphere Fe@Fe/Pd reactors: a magnetically recoverable catalyst for the C<Subscript>sp</Subscript>–S cross-coupling reactions in water

The hollow Pd–PVP–Fe nanosphere and Fe–PVP nanoparticle catalysts were synthesized by thermal method. Mixing of two metallic nanocatalysts was applied in the C_sp–S cross-coupling reactions between diphenyl disulfide and phenylacetylene under mild conditions in water. Results show that bi-catalytic system has higher catalytic efficiencies than their monocatalytic systems due to synergy between two catalysts. Order of adding two metallic catalysts were adjusted into the coupling reaction medium. Therefore, various bi-catalytic systems were obtained and characterized by XRD, SEM, EBSD, EDX, UV–Vis spectra, and particle size analyzer. Under special order of adding, the obtained hollow nanoshell-sphere Fe@Fe/Pd reactor showed higher catalytic activity in the coupling reaction compared to other bi-catalytic systems. The C_sp–S coupling products obtained of various diaryl disulfides and phenylacetylene at presence Fe@Fe/Pd (only 7.3?×?10^?5 mmol Pd) catalyst with moderate to high yields in water solvent and mild reaction conditions. After the reaction, the catalyst/product(s) separation could be easily achieved with an external magnet and more than 95% of catalyst could be recovered. The recovered catalyst was characterized by XRD, SEM, EBSD, EDX, and UV–Vis spectra. The Fe@Fe/Pd was reused at least six repeating cycles without any loss of its high catalytic activity. Tuning morphology and chemical composition of bi-catalytic system are key mainstays of high activity of Fe@Fe/Pd in repeating cycles of cross-coupling reactions.     

Optical and electrical conducting properties of Polyaniline/Tin oxide nanocomposite

Polyaniline(PANI)/Tin oxide (SnO₂) hybrid nanocomposite with a diameter 20–30 nm was prepared by co-precipitation process of SnO₂ through in situ chemical polymerization of aniline using ammonium persulphate as an oxidizing agent. The resulting nanocomposite material was characterized by different techniques, such as X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Fourier Transform Infrared spectroscopy (FT-IR) and Ultraviolet–Visible spectroscopy (UV–Vis), which offered the information about the chemical structure of polymer, whereas electron microscopy images provided information regarding the morphology of the nanocomposite materials and the distribution of the metal particles in the nanocomposite material. SEM observation showed that the prepared SnO₂ nanoparticles were uniformly dispersed and highly stabilized throughout the macromolecular chain that formed a uniform metal-polymer nanocomposite material. UV–Vis absorption spectra of PANI/SnO₂ nanocomposites were studied to explore the optical behavior after doping of nanoparticles into PANI matrix. The incorporation of SnO₂ nanoparticles gives rise to the red shift of π–π¹ transition of polyaniline. Thermal stability of PANI and PANI/SnO₂ nanocomposite was investigated by thermogravimetric analysis (TGA). PANI/SnO₂ nanocomposite observed maximum conductivity (6.4 × 10^?3 scm^?1) was found 9 wt% loading of PANI in SnO₂.     

Stereoselective synthesis of pseudoglycosides catalyzed by TeCl4 under mild conditions

Catalytic amounts of tellurium(IV) tetrachloride were used to promote the O-glycosylation of 3,4,6-tri-O-acetyl-d-glucal to give the corresponding 2,3-unsaturated-O-glycosides. With simple alcohols, the desired compounds were obtained in good yields and excellent anomeric selectivity in a short reaction time using only 2 mol % of the catalyst. The application of the method in the synthesis of a small set of glycopyranosides with rigid or flexible linkers gave the corresponding α anomers as products in good yields. Further applications of some of the synthesized compounds in allylation reaction of aldehydes gave the corresponding homoallylic alcohols in good yields.     

Preparation,characterization and catalytic activity of MoO3/CeO2–ZrO2 solid heterogeneous catalyst for the synthesis of β-enaminones

A series of CeO₂–ZrO₂ with different molybdenum (8–20 wt% MoO₃) loaded materials were prepared by homogeneous co-precipitation followed by impregnation method. The prepared materials were tested for their catalytic activity performance in the synthesis of β-enaminones by condensation of various anilines with dimedone under solvent-free conditions in microwave providing excellent yields within short reaction time. An obtained result reveals that, catalytic activity increases with increase in Mo wt% loading. The particle size of prepared materials was estimated using Debye–Scherrer equation. Particle size increases with increase in Mo wt% loading providing nanosized particle ranging from 7.11 to 42.09 nm. The synthesized materials were characterized by means of X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) techniques.     

Phytochemical fabrication and characterization of silver nanoparticles by using Pepper leaf broth

The Pepper leaves extract acts as a reducing and capping agent in the formation of silver nanoparticles. A UV–Vis spectrum of the aqueous medium containing silver nanoparticles demonstrated a peak at 458 nm corresponding to the plasmon absorbance of rapidly synthesized silver nanoparticles that was characterized by UV–Vis spectrophotometer. The morphology and size of the benign silver nanoparticles were carried out by the transmission electron microscope (TEM) and field emission scanning electron microscope (FE-SEM). The sizes of the synthesized silver nanoparticles were found to be in the range of 5–60 nm. The structural characteristics of biomolecules hosted silver nanoparticles were studied by X-ray diffraction. The chemical composition of elements present in the solution was determined by energy dispersive spectrum. The FTIR analysis of the nanoparticles indicated the presence of proteins, which may be acting as capping agents around the nanoparticles. This study reports that synthesis is useful to avoid toxic chemicals with adverse effects in medical applications rather than physical and chemical methods.     

Modification of photocatalytic TiO2 thin films by electron beam irradiation

Noble metal-modified TiO₂ films were prepared by electron beam deposition of Pt, Pd, Au and Ag on the surface of TiO₂ films with diameters ranging from <1 nm to 500 nm. The morphology of the films was characterized by X-ray diffractometry (XRD), field emission scanning electron microscope (FMSEM) and transmission electron microscope (TEM). The photocatalytic capability of the films were tested and compared by degradation of methyl orange (MO) in aqueous solutions under both UV and visible light illumination.