A dual-function chemosensor based on coumarin for fluorescent turn-on recognition of Hg2+ and colorimetric detection of Cu2+ in aqueous media

A novel coumarin derivative CTT was synthesized via the condensation of 7-(N,N-diethylamino) coumarin-3-aldehyde with 5-amino-1,3,4-thiadiazole-2-thiol and its structure was characterized using infrared spectroscopy (IR), ¹H NMR, mass spectrometry (MS) techniques, and elemental analysis. The recognition properties of CTT with metal ions were investigated in CH₃CN–H₂O (v/v = 1/1) solution using UV–vis absorption and fluorescence emission spectrum method. The results showed that CTT could monitor Cu²⁺ and Hg²⁺ simultaneously as a dual-function chemosensor in CH₃CN–H₂O (v/v = 1/1). CTT could be used to detect Cu²⁺ colorimetrically; when using CTT, a color change from yellowish-brown to yellowish-green could be readily observed by the naked eye. CTT showed turn-on fluorescent recognition of Hg²⁺, the fluorescence enhancement was attributed to the inhibited C=N isomerization and the obstructed excited state intramolecular proton transfer (ESIPT) of CTT. The recognition mechanism of CTT for Cu²⁺ and Hg²⁺ was studied by experiments and theoretical calculations, respectively. Therefore, CTT has the ability to be a “single chemosensor for dual targets.”     

A colorimetric and fluorescent chemosensor for detection of Hg2+ using counterion exchange of cationic polydiacetylene

In this study, a colorimetric and fluorescent chemosensor for mercury ions (Hg²⁺) was developed. Cationic polydiacetylene (PDA) vesicles with a quaternary ammonium cation and iodide as a counterion show a blue-to-red color transition; the color change is accompanied by a fluorescence enhancement in selective response to Hg²⁺ ions because of a perturbation of the ene–yne conjugated backbone induced by counterion exchange. It allows for selective detection of Hg²⁺ with the naked eye and the sensor is used to determine Hg²⁺ concentrations in tap water samples.     

A fluorescent chemosensor for Cu2+ ions and its application in cell imaging

A new on-off fluorescent probe 1 for Cu²⁺ based on Schiff base compound was designed and synthesized by one-step reaction. The single probe 1 exhibited strong green fluorescence emission. A fluorescence quenching effect and faint color change were observed as soon as the Cu²⁺ was added to the probe system in H₂O/EtOH (v/v = 8:2, HEPES buffer, 0.05 M, pH = 7.4) solution. Other common metal cations did not cause the changes in the fluorescence and color of the probe 1. The optical properties were studied by the fluorescence emission and UV–Vis spectra. Meanwhile, the geometry optimizations of probe 1 and the [1-Cu²⁺] coordination complexes were also carried out by DFT using the Gaussian 09 program, in which the B3LYP function was used. Based on experimental measurement and theoretical analysis, we can know that the combination ratio of the probe and Cu²⁺ is 2:1 and the limit of detection (LOD) is as low as 5.3 × 10^?9 M Besides, the probe 1 was also used to analyze the Cu²⁺ in living cells.     

Highly selective colorimetric naked-eye Cu2+ detection using new bispyrazolone silver nanoparticle-based chemosensor

In this work, we have successfully developed novel silver nanoconjugates of pyrazolone analogue and screened its chemosensing potential in aqueous medium. Bispyrazolone silver nanoparticles (Bispyra-AgNPs) were synthesised and characterised through FTIR, UV-visible spectroscopy and atomic force microscopy. The sensing ability was explored towards Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Li⁺, Pb²⁺, La³⁺, Hg²⁺, Mg²⁺, Ni²⁺ and Ba²⁺ metal ions, respectively. Bispyra-AgNPs showed a highly quenching potential in selective recognition of Cu²⁺and colour of the solution immediately turned from yellow to purple, after the addition of Cu²⁺ in to the solution. The developed method also displayed a remarkable selectivity for Cu²⁺ over others interfering metal ions. The binding ratio and stoichiometry of host-guest complex was found to be 1:1 and determined by Job’s method. The propose method is facile and sensitive to detect Cu²⁺ with detection limit of 10 µM.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

A new rhodamine-based dual chemosensor for Al and Cu

A new rhodamine B derivative bearing a hydrazone group has been designed and prepared. The synthesized colorimetric and fluorescent molecular chemosensor can be used as a dual probe, selectively detecting Al³⁺ and Cu²⁺ in acetonitrile solution by monitoring changes in the absorption and fluorescence spectral patterns. The results show that Al³⁺ ions can induce a greater fluorescence enhancement, while the addition of Cu²⁺ ions induces a strong UV–vis absorption enhancement with weak fluorescence. The limits of detection of Cu²⁺ and Al³⁺ were estimated to be 2.9 × 10⁻⁷ M and 8.3 × 10⁻⁹ M, respectively.     

A multifunctional aggregation-induced emission (AIE)-active fluorescent chemosensor for detection of Zn2+ and Hg2+

An aggregation-induced emission (AIE)-active fluorescent chemosensor based on a tetraphenylethene (TPE) unit has been successfully designed and synthesized. Interestingly, the luminogen could detect Zn²⁺ selectively in a THF solution with the detection limit of 1.24 × 10⁻⁶ mol L⁻¹. Meanwhile, the luminogen could also detect Hg²⁺ selectively in a THF-water mixture with the water content of 90%, and the detection limit was 2.55 × 10⁻⁹ mol L⁻¹. Furthermore, the solid-state mechanochromic fluorescence behavior of the luminogen was investigated systematically. Indeed, the AIE-active luminogen also exhibited reversible mechanofluorochromic phenomenon involving fluorescent color change from blue to green, and powder X-ray diffraction results indicated that the switchable morphology conversion between crystalline and amorphous states was responsible for this mechanochromism phenomenon.     

"Off-On" based fluorescent chemosensor for Cu2+ in aqueous media and living cells

A novel Cu²⁺-specific “off-on” fluorescent chemosensor of naphthalimide modified rhodamine B (naphthalimide modified rhodamine B chemosensor, NRC) was designed and synthesized, based on the equilibrium between the spirolactam (non-fluorescence) and the ring-opened amide (fluorescence). The chemosensor NRC showed high Cu²⁺-selective fluorescence enhancement over commonly coexistent metal ions or anions in neutral aqueous media. The limit of detection (LOD) based on 3 × δ_blank/k was obtained as low as 0.18 μM of Cu²⁺, as well as an excellent linearity of 0.05-4.5 μM (R = 0.999), indicating the chemosensor of high sensitivity and wide quantitation range. And also the coordination mode with 1:1 stoichiometry was proposed between NRC and Cu²⁺. In addition, the effects of pH, co-existing metal ions and anions, and the reversibility were investigated in detail. It was also demonstrated that the NRC could be used as an excellent “off-on” fluorescent chemosensor for the measurement of Cu²⁺ in living cells with satisfying results, which further displayed its valuable applications in biological systems.     

A colorimetric and ratiometric fluorescent chemosensor based on furan-pyrene for selective and sensitive sensing Al3+

A new pyrene derivative BF bearing a furan group was synthesized via a one-step reaction as a colorimetric and ratiometric chemosensor for Al³⁺in ethanol-H₂O (9:1,v/v,pH 7.2,HEPES buffer) solution.This chemosensor could selectively recognize Al³⁺ in the presence of other competing ions.Low limit of detection (LOD) and high association constant revealed its superior sensitivity and binding affinity toward Al³⁺.Besides,the probe BF performed perfectly in a reversibility test using EDTA.The mechanism of the interaction has been confirmed by ¹H NMR titration.Importantly,chemosensor BF has also been utilized to detect Al³⁺ on test paper strips,which showed its potential for practical applications.     

Ferrocene based chemosensor for Cu2+--a dual channel signaling system

A new ferrocene based molecule behaves as a dual channel signaling chemosensor for Cu²⁺ over other metal ions. The perturbations in the absorption pattern and electrochemical behavior of the chemosensor are presented. These have been proposed to be caused by the interaction of Cu²⁺ with the d-electrons and the electron rich π-system of the ferrocenyl derivative. The sensing event is manifested by a high energy shift in the ligand centered π-π* absorption and appearance of a new redox wave at more positive potential, in addition to Fe(II)/Fe(III) couple wave (two wave electrochemical behavior).     

A new bis(pyrenyl)azadiene-based probe for the colorimetric and fluorescent sensing of Cu(II) and Hg(II)

A novel colorimetric and fluorescent chemosensor 2, made up of two pyrene units connected by a 2-aza-1,3-butadiene ionophore, was designed and prepared for the selective detection of Cu²⁺ and Hg²⁺ in the presence of other metal cations. This molecular sensor exhibits substantial colour changes and fluorescence enhancement upon complexation with these metal cations in acetonitrile solutions, with detection limits in the order of 10⁻⁶ M. Job's plots revealed a 1:1 stoichiometry rationalized by theoretical DFT calculations.     

A novel selective fluorescent chemosensor for Cu（Ⅱ）

A novel fluorescence enhancement Cu~(2 ) chemosensor derived from coumarin was prepared.Emission study found that it exhibits evident Cu~(2 )-amplified fluorescence prior to Co~(2 ),Pb~(2 ),Mg~(2 ),Mn~(2 ),Ni~(2 ),Zn~(2 ),Fe~(3 ),Ag~ and Cd~(2 ),and the largest emission enhancement factor is about 9 at a ratio of 2:1 (chemosensor 1/Cu~(2 )).     

A metal–organic gel‐based fluorescent chemosensor for selective Al3+ detection

As an important metal element, aluminium has a significant impact on the environment and human health, and thus the detection of Al³⁺ has become the subject of much research. We synthesized a Ni(II)‐based metal–organic gel (Ni‐MOG), which can serve as an Al³⁺ fluorescence sensor with high selectivity and sensitivity, the limit of detection being calculated to be 0.5 μM. In addition, a composite film was further fabricated by hybridization of this Ni‐MOG with poly(vinyl alcohol). The composite film produced a rapid fluorescence response to Al³⁺ solutions at concentrations above 5 × 10^?5 M in 5 min. The Ni‐MOG composite film can also be successfully applied for the sensitive detection of Al³⁺ in real samples of tap water and seawater. The effective detection of Al³⁺ described in this contribution provides a new insight into water quality monitoring and has promising application value.     

A highly selective and colorimetric naked-eye chemosensor for Cu2+

A sample and practical colorimetric naked-eye chemosensor 3-nitro-4-ethylenediamido-nitrobenzene (2) for metal cations was designed and synthesized. It displays high selectivity and sensitivity for Cu2+ by the UV absorption which appeared a new peak at 525 nm and color change from yellow to red by naked-eye in CH3OH/H2O pH 7.6.     

A novel rhodamine-based turn-on probe for fluorescent detection of Au3+ and colorimetric detection of Cu2+

In this work, we design and synthesize the novel probe RC through introduction the 1-aza-4,13-dithia-15-crown-5 ring into the structure of rhodamine 6G hydrazide, where the N atom of crown ring is responsible for quenching of rhodamine fluorescence. The compound obtained behaves as multifunctional cation sensor providing selective fluorescent response to Au³⁺ and selective colorimetric response to Cu²⁺ ions in aqueous acetonitrile (1/1, v/v) at pH 7.0. The use of 10^?5?M RC solution allowed reliable determination of target cations in the presence of a wide range of environmentally relevant ions with detection limits of 2?×?10^?6?M and 5?×?10^?7?M for gold and copper, respectively.     

A novel colorimetric and fluorescent chemosensor: synthesis and selective detection for Cu and Hg

A novel two-channel metal ion sensor has been synthesized from macrocyclic dioxotetraamine and 1,8-naphthalimide derivative. The metal ion-selective signaling behaviors of the sensor were investigated. The sensor presented the selective coloration for Cu²⁺ and Hg²⁺ that can be detected by the naked-eye, respectively. Besides, the addition of Cu²⁺ and Hg²⁺ quenched the fluorescence of 1 obviously and the detection limit was found to be 3 × 10⁻⁷ M for Cu²⁺ and 7 × 10⁻⁷ M for Hg²⁺. This sensor can be utilized for the visual and spectroscopic detection of Cu²⁺ or Hg²⁺ in the presence of the other competing metal ions.     

含萘基团对铜离子具有高选择性的化学荧光传感器

设计合成了一种新的含萘和二吡啶甲基胺基团的荧光化学传感器,并利用氢核磁波谱和质谱对其结构进行了表征.新合成的化合物在乙腈和水的混合溶液中表现出了对二价铜离子具有很高的选择性,与铜离子的键合增强了其荧光强度.荧光和激发光谱滴定表明传感器分子与二价铜离子形成了1∶2的配合物.化合物中的N与铜离子的配位阻止了电子从分子中的N...     

Ratiometric chemosensor for fluorescent determination of Zn2+ in aqueous ethanol

A new ratiometric and selective fluorescent chemosensor (1) for quantification of zinc ions in aqueous ethanol has been synthesized and investigated in this work. In an environmentally friendly media of 30% (v/v) water/ethanol and 10 mM Tris-HCl neutral buffer (pH 7.03), 1 displayed selective Zn²⁺ ratiometric fluorescence response, with a dynamic working range of 1.0-8.0 μM and a detection limit of 0.5 μM Zn²⁺. The determination of Zn²⁺ in synthesized water sample was also successful.