A Benzodithiophene‐Based Fluorescence Probe for Rapid Detection of Fluoride Ion

A novel and simple fluorescence probe was synthesized from benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and trimethylsilylethyne via Sonogashira reaction, and showed highly selective and sensitive fluorescence decreasing response towards F^?. The probe molecule turned to a weakly fluorescent terminal alkyne moiety because its trimethylsilyl (TMS) group was cleaved by fluoride, which was proved by ¹H NMR titration. Whereas no distinct fluorescent changes were observed with the addition of other anions, such as Cl^?, Br^?, I^?, AcO^? and H₂PO₄^?. Upon the addition of F^?, the maximum fluorescence emission wavelength shifted from 460 nm to 450 nm with a decrease of fluorescence intensity by 40% within 20 s. Moreover, the detection limit towards F^? was calculated to be as low as 73.5 nmol/L.     

A ratiometric fluorescent probe for fluoride ion employing the excited-state intramolecular proton transfer

A ratiometric fluorescent probe 1 for fluoride ion was developed based on modulation of the excited-state intramolecular proton transfer (ESIPT) process of 2-(2′-hydroxyphenyl)benzimidazole (HPBI) through the hydroxyl group protection/deprotection reaction. The probe 1 was readily prepared by the reaction of HPBI with tert-butyldimethylsilyl chloride (TBS-Cl) and shows only fluorescence emission maximum at 360 nm. Upon treatment with fluoride in aqueous DMF solution, the TBS protective group of probe 1 was removed readily and ESIPT of the probe was switched on, which resulted in a decrease of the emission band at 360 nm and an increase of a new fluorescence peak around 454 nm. The fluorescent intensity ratio at 454 and 360 nm (I₄₅₄/I₃₆₀) increases linearly with fluoride ion concentration in the range 0.3-8.0 μmol L⁻¹ and the detection limit is 0.19 μmol L⁻¹. The proposed probe shows excellent selectivity toward fluoride ion over other common anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.     

Development of [(2E,6E)-2,6-bis(4-(dimethylamino)benzylidene)cyclohexanone] as fluorescence-on probe for Hg2+ ion detection: Computational aided experimental studies

Selective metal ion detection is highly desired in fluorometric analysis. In the current study a curcumin-based fluorescence-on probe/[(2E,6E)-2,6-bis(4-(dimethylamino) benzylidene) cyclohexanone]/probe was designed for the removal of one of the most toxic heavy metal ion i.e. Hg²⁺. The structure of the probe was confirmed by FTIR and ¹H NMR spectroscopic analysis displaying distinctive peaks. The complex formation between probe and Hg²⁺ ion was also studied by density functional theory to support the experimental results. Chelation enhanced fluorescence was observed upon interaction with Hg²⁺ ion. Different parameters like pH, effect of mercury ion concentration, contact time, interference study and effect of probe concentration on the fluorescence enhancement were also investigated. A rapid response was detected for Hg²⁺ ion with limit of detection and quantification as 2.7 nM and 3 nM respectively with association constant of 1 × 10¹¹ M^?2. The probe displayed maximum fluorescence intensity at physiological pH. The results showed that the synthesized probe can be employed as an excellent probe for the detection and quantification of Hg²⁺ ions in aqueous samples with high selectivity and sensitivity due to its higher binding energy and larger charge transferring ability.     

A novel “Turn-On” fluorescent probe for F detection in aqueous solution and its application in live-cell imaging

A novel probe incorporating quaternized 4-pyridinium group into a BODIPY molecule was synthesized and studied for the selective detection of fluoride ions (F⁻) in aqueous solution. The design was based on a fluoride-specific desilylation reaction and the “Turn-On” fluorescent response of probe 1 to F⁻ was ascribed to the inhibition of photoinduced electron transfer (PET) process. The probe displayed many desired properties such as high specificity, appreciable solubility, desirable response time and low toxicity to mammalian cells. There was a good linearity between the fluorescence intensity and the concentrations of F⁻ in the range of 0.1–1 mM with a detection limit of 0.02 mM. The sensing mechanism was confirmed by the NMR, electrospray ionization mass spectrum, optical spectroscopy and the mechanism of “Turn-On” fluorescent response was also determinated by a density functional theory (DFT) calculation using Gaussian 03 program. Moreover, the probe was successfully applied for the fluorescence imaging of F⁻ in human epithelial lung cancer (A549) cells and alveolar type II (ATII) cells under physiological conditions.     

A coumarin-based fluorescent and colorimetric chemosensor for rapid detection of fluoride ion

A novel coumarin-based compound 1 featuring thiosemicarbazone as binding unit, was reported as a colorimetric and fluorescent probe for the detection of fluoride anion. The addition of F^? to a solution of probe 1 in tetrahydrofuran resulted in evident naked-eye color change from green-yellow to orange-red under daylight and obvious fluorescence quenching within 3 s. And the detection limit toward F^? was calculated to be as low as 2.16 × 10^?7 mol/L. ¹H NMR titrations proved that the interaction between 1 and fluoride ion: hydrogen bond at low fluoride ion concentration, deprotonation at high fluoride ion concentration. Besides, it exhibited highly sensitivity and selectivity for F^? over other examined ions (Cl^?, Br^?, I^?, AcO^?, NO₃^?, HSO₄^?, H₂PO₄^?) in tetrahydrofuran solution.     

Polymorph‐Dependent Solid‐State Fluorescence and Selective Metal‐Ion‐Sensor Properties of 2‐(2‐Hydroxyphenyl)‐4(3H)‐quinazolinone

2‐(2‐Hydroxy‐phenyl)‐4(3H)‐quinazolinone (HPQ), an organic fluorescent material that exhibits fluorescence by the excited‐state intramolecular proton‐transfer (ESIPT) mechanism, forms two different polymorphs in tetrahydrofuran. The conformational twist between the phenyl and quinazolinone rings of HPQ leads to different molecular packing in the solid state, giving structures that show solid‐state fluorescence at 497 and 511 nm. HPQ also shows intense fluorescence in dimethyl formamide (DMF) solution and selectively detects Zn²⁺ and Cd²⁺ ions at micromolar concentrations in DMF. Importantly, HPQ not only detects Zn²⁺ and Cd²⁺ ions selectively, but it also distinguishes between the metal ions with a fluorescence λ_max that is blue‐shifted from 497 to 420 and 426 nm for Zn²⁺ and Cd²⁺ ions, respectively. Hence, tunable solid‐state fluorescence and selective metal‐ion‐sensor properties were demonstrated in a single organic material.     

A fluorescent chemical sensor for Fe based on blocking of intramolecular proton transfer of a quinazolinone derivative

In this paper, 2-(2′-hydroxy-phenyl)-4(3H)-quinazolinone (HPQ), a typical compound that exhibits excited state intramolecular proton transfer (ESIPT) reaction and possesses good photophysical properties, is synthesized and used as fluoroionophore for Fe³⁺ sensitive optochemical sensor. The decrease of fluorescence intensity of HPQ membrane upon the addition of Fe³⁺ was attributed to the blocking of ESIPT reactions of HPQ and quenching its fluorescence. The effect of the composition of the sensing membrane was studied, and experimental conditions were optimized. The sensor shows a linear response toward Fe³⁺ in the concentration range of 7.1 × 10⁻⁷ M to 1.4 × 10⁻⁴ M with a limit of detection of 8.0 × 10⁻⁸ M, and a working pH range from 2.5 to 4.5. It shows excellent selectivity for Fe³⁺ over a large number of cations such as alkali, alkaline earth and transitional metal ions. The proposed sensor is applied to the determination of the content of iron ions in pharmaceutical preparations samples with satisfactory results.     

2,6-Bis(2-benzimidazolyl)pyridine as a chemosensor for fluoride ions

2,6-Bis(2-benzimidazolyl)pyridine, a neutral tridentate ligand, is employed as a chemosensor for the detection of fluoride ions. The binding of anionic guest species with this ligand is studied using UV-vis spectroscopy, fluorescence spectroscopy, and ¹H NMR techniques. The results indicate that 2,6-bis(2-benzimidazolyl)pyridine can be used as a chemical shift and optical modification based sensor for the detection of fluoride ions.     

Fused bis[2-(2′-hydroxyphenyl)benzoxazole] derivatives for improved fluoride sensing: The impact of regiochemistry and competitive hydrogen bonding

Development of fluorescent chemical sensors for fluoride is important due to increased use of fluoride in environment. A fused bis[2-(2′-hydroxyphenyl)benzoxazole] 5, which is capable of giving ESIPT emission, is found to be a useful fluorescent sensor for fluoride detection. Upon binding to fluoride, bis(HBO) 5 shows a large spectral shift in both fluorescence (from ～490 nm to ～440 nm) and absorption (from 353 nm to 392 nm). In comparison with the isomeric 4, bis(HBO) 5 dramatically improves the sensitivity in fluoride binding (by an order of magnitude), revealing a large impact of regiochemistry on the sensor performance. ¹H NMR has been used to study the fluoride binding, and to correlate the intramolecular hydrogen bonding with the fluoride response. Sensitivity of 5 towards fluoride is as low as 10^?5 M. Bis(HBO) 5 also showed excellent selectivity towards fluoride while being silent to other anions (Cl^?, Br^?, HS^? and PO₄^3?), thus making 5 a potentially useful probe.     

A reversible dual-channel chemosensor for fluoride anion

A colorimetric and fluorescent fluoride probe bearing phenolic hydroxy and imine groups has been designed and synthesised. This receptor could visually and spectroscopically recognise F^?  with high selectivity over other anions. After the addition of fluoride ions to the solution of ([1,1′-biphenyl]-4,4′-diylbis (azanylylidene)) bis (methanylylidene)) bis (naphthalen-2-ol) (TY), since the deprotonation reaction occurred between the sensor and fluoride, the fluorescence intensity of the solution changed significantly. Furthermore, the quenched fluorescence caused by fluoride ions could be recovered upon the addition of calcium ions to this complex solution. This resulted in an ‘OFF-ON-OFF’ type sensing. In particular, an IMP logic gate has been proposed using the output obtained from the fluorescence studies. The fluorescence, UV-vis titration and ¹H NMR titration experiments indicated that the effects might occur via a combined process including hydrogen bond and deprotonation between the sensor and F^? .     

Highly selective fluorescence turn-on determination of fluoride ions via chromogenic aggregation of a silyloxy-functionalized salicylaldehyde azine

A novel fluorescent chemsensor TBS-protected salicylaldehyde azine (TSAA) for fluoride ion was developed based on aggregation-induced emission (AIE). The probe TSAA was prepared by the reaction of salicylaldehyde azine (SAA) with tert-butyldimethylsilyl chloride (TBS-Cl) via an unusual synthetic methodology and shows only non-emission. Upon treatment with fluoride in aqueous MeCN solution, the TBS protective group of probe TSAA was removed readily and the fluorescence of the probe was switched on, which resulted in a new fluorescence peak around 543 nm. The fluorescent intensity at 543 nm increases linearly with fluoride ion concentration in the range 1–50 μmol L^?1. This proposed probe shows excellent selectivity toward fluoride ion over other common anions and cations.     

A highly sensitive naphthalimide-based fluorescent probe for detection of Cu2+ via selective hydrolysis reaction and its application in practical samples

A novel fluorescent probe CN3, containing 1,8-naphthalimide and picolinate units, was synthesized, and its structure was characterized by ¹H nuclear magnetic resonance spectroscopy (H NMR), ¹³C nuclear magnetic resonance spectroscopy (C NMR), and mass spectroscopy techniques. The detection property of CN3 toward copper ions (Cu²⁺) has been investigated in ethanol–HEPES buffer (v/v = 1/1, pH = 7.40) solution by UV–Vis absorption and fluorescence emission spectra. The results showed that CN3 had a highly selective and sensitive fluorescence quenching response to Cu²⁺, which was attributed to the generation of weak fluorescent N-ethyl-4-hydroxyphenyl-1,8- naphthalimide (compound 2) in polar ethanol–HEPES buffer (v/v = 1/1, pH = 7.40) via selective hydrolysis reaction. The detection of CN3 for Cu²⁺ was not influenced in the presence of other competing metal ions, and the limit of detection was as low as 50.0 nM. Therefore, the color of CN3 changed from colorless to yellowish when the Cu²⁺ was added. Furthermore, the fluorescent probe CN3 was utilized to detect Cu²⁺ in real water samples with fine performance.     

A novel lipid droplets-targeting fluorescent probe based on dicyanisophorone and carbazole for Cu2+ and its application

A novel fluorescent probe, LCH , based on dicyanisophorone and carbazole, was prepared for the visual detection of Cu²⁺. The probe LCH could recognize Cu²⁺ by fluorescence quenching in EtOH/H₂O (1/4, v/v) solution, which could be easily identified under the 365 nm UV lamp, and the detection limit was as low as 0.785 μM. The recognition mechanism of probe LCH with Cu²⁺ was determined by combining ¹H NMR titration, MS, and theoretical calculations. Practical application experiments showed that probe LCH could be used to detect Cu²⁺ in the test strip experiments. Cell imaging experiments showed that the probe LCH owned good cell permeability and could be applied to the imaging of Cu²⁺ in HepG2 cells. In addition, fluorescence colocalization experiments showed that LCH could target lipid droplets. These results indicate that the probe LCH will have a good application prospect in environmental detection and clinical medicine.     

Development of a fluorescent chelating ligand for gallium ion having a quinazoline structure with two Schiff base moieties

A novel chelating ligand, 2,4-[bis-(2,4-dihydroxybenzylidene)]-dihydrazinoquinazoline (DBHQ), was synthesized, and the fluorescence characteristics of its complex with metal ions were investigated.Thirty-five different metal ions were tested for the emission of fluorescence in the presence of DBHQ in aqueous solutions in a pH range of 3.0-10.5 (at a difference of 0.5 for each metal).It was observed that DBHQ fluoresces intensely at 470 nm with an excitation wavelength of 405 nm in the presence of Ga³⁺ or Al³⁺ in the pH range 3.0-4.0. The other metal ions did not show fluorescence with DBHQ. Although the presence of Cu²⁺, Co²⁺ and Fe³⁺ decreased the fluorescence intensity of DBHQ-Ga³⁺, the addition of a fluoride ion (NaF) recovered the fluorescence by masking the interfering ions. In addition, the fluoride ions were found to enhance the sensitive determination of Ga³⁺ because the fluorescence intensity of DBHQ-Ga³⁺ was further increased approximately 2.5-fold in the presence of F⁻ (? = 0.658) from that in the absence of F⁻ (? = 0.401). The fluoride ions also masked the Al³⁺ ions, which emit fluorescence on chelation with DBHQ. Therefore, a selective and sensitive detection of Ga³⁺ was achieved by using DBHQ in the presence of F⁻. The detection limit of Ga³⁺ was approximately 50 nmol L⁻¹ (3.5 ppb). The proposed method was applicable to determine Ga³⁺ in river water.     

High-Affinity Ratiometric Fluorescence Probe Based on 6-Amino-2,2′-Bipyridine Scaffold for Endogenous Zn2+ and Its Application to Living Cells

Zinc is an essential trace element involved in many biological activities; however, its functions are not fully understood. To elucidate the role of endogenous labile Zn²⁺, we developed a novel ratiometric fluorescence probe, 5-(4-methoxyphenyl)-4-(methylsulfanyl)-[2,2′-bipyridin]-6-amine (6 (rBpyZ)) based on the 6-amino-2,2′-bipyridine scaffold, which acts as both the chelating agent for Zn²⁺ and the fluorescent moiety. The methoxy group acted as an electron donor, enabling the intramolecular charge transfer state of 6 (rBpyZ), and a ratiometric fluorescence response consisting of a decrease at the emission wavelength of 438 nm and a corresponding increase at the emission wavelength of 465 nm was observed. The ratiometric probe 6 (rBpyZ) exhibited a nanomolar-level dissociation constant (K_d = 0.77 nM), a large Stokes shift (139 nm), and an excellent detection limit (0.10 nM) under physiological conditions. Moreover, fluorescence imaging using A549 human lung adenocarcinoma cells revealed that 6 (rBpyZ) had good cell membrane permeability and could clearly visualize endogenous labile Zn²⁺. These results suggest that the ratiometric fluorescence probe 6 (rBpyZ) has considerable potential as a valuable tool for understanding the role of Zn²⁺ in living systems.     

Facile synthesis of an optical sensor for CO32− and HCO3− detection

A novel fluorogenic signalling probe (E)-3-(4-methoxyphenyl)-4-[(4-nitrobenzylidene)amino]-1H-1,2,4-triazole-5(4H)-thione (6) for the carbonate and bicarbonate ions has been developed through microwave assisted Schiff base formation reaction. The anion recognition occurs through hydrogen bonding assessed by ¹H NMR titration experiments. The photophysical results of probe 6 corroborates its applicability as an optical sensing platform for carbonate as well as bicarbonate ions in mixed aqueous organic media depending on pH of reaction solution. The fluorescence emission signal enhancement at 424 nm and considerable shift in the signal position as well as molar absorptivity to the probe absorption bands upon CO₃^2? and HCO₃^? addition suggest the affinity of probe 6 towards these ions in comparison to a variety of competitive ions in aqueous/ethanol (7:3, v/v) at neutral pH and ambient temperature. From the fluorescence titration experiment, the limit of detection was calculated to be 1.91 μM.     

Highly selective chromogenic and fluorogenic probe based on benzothiazole-thiosemicarbazone Schiff base for detection of copper (II) in real samples

Copper is the third most abundant essential transition metal ion in the human body. It's responsible for important activities in many living things, but excessive intake of Cu²⁺ can lead to a range of diseases. A colorimetric and turn-off fluorescent probe (E)-2-(5-(benzothiazol-2-yl)-2-(diethylamino)-4-hydroxybenzylidene)-N-phenylhydrazine-1-carbothioamide ( ZTR ) was designed and synthesized by thiosemicarbazone Schiff base as a specific complexes site strategy to achieve highly specific Cu²⁺ detection. The fluorescence of the probe ZTR solution fell dramatically when Cu²⁺ was added, and its appearance changed from dazzling blue to nearly colorless. The simple structure and readily available fluorescent probe provide a novel approach for the quantitative detection of Cu²⁺ in the linear range from 0 to 0.12 μM, with a detection limit down to 16 nM, and with high selectivity for Cu²⁺ over 15 other metal ions. Job’s plot analysis showed that probe ZTR and Cu²⁺ formed a 1:1 coordination complex. In addition, because of its low detection limits and fast response time, the created fluorescent molecule was effectively used to study the target ions on test paper strips and in water samples.))     

Fluorometric determination of fluoride ion by reagent tablets containing 3-hydroxy-2'-sulfoflavone and zirconium(IV) ethylenediamine tetraacetate

A reagent tablet for determination of fluoride ion has been prepared using ethylenediamine-N,N,N′,N′-tetraacetate complex of zirconium (Zr-EDTA), 3-hydroxy-2′-flavone (FS) and an appropriate pH buffer. Dissolving of the tablet into water exhibits an intense blue fluorescence (λ_max = 460 nm) upon excitation at 377 nm and the fluorescence intensity decreases with the presence of fluoride ion. Hence, a simple fluorescent detection procedure for fluoride ion in aqueous media was successfully constructed with this tablet. The principle of this detection system is the ligand exchange reaction of FS bound to Zr-EDTA with fluoride ion. The present system provides an easy, rapid and selective determination method of fluoride ion ranging from 5 × 10⁻⁶ to 1 × 10⁻³ mol dm⁻³. The measurement of real samples with this tablet showed the similar results as those by the common method with the Alfusone reagent.     

Self-assembly of a quadrangular prismatic covalent cage templated by zinc ions: A selective fluorescent sensor for palladium ions

Herein we report a covalent cage TPE-Zn₄ based on a tetraphenylethylene molecule via subcomponent self-assembly, which is templated by zinc ions. TPE-Zn₄ features a quadrangular prismatic cage structure, which is characterized by NMR, mass spectrum, and single-crystal X-ray diffractions. TPE-Zn₄ emitted orange fluorescence (λ_em = 620 nm) in DMSO solution under the irradiation of UV light (λ_ex = 395 nm) and can be applied as a fluorescence sensor for selectively detecting Pd²⁺. The fluorescence of TPE-Zn₄ was quenched by Pd²⁺ in DMSO solution, and a very low detection limit of 62.3 nM was achieved. Mechanism studies reveal that the Pd²⁺ can replace the Zn²⁺, and the heavy atom effect and chelation-enhanced quenching effect between the Pd²⁺ and the cage probably cause the fluorescence quenching.     

A new fluorescent-colorimetric chemosensor for fluoride anion based on benzimidazolium salt

Two new benzimidazolium salts with the same cationic moiety and different anions 3-(2′-((8″-hydroxy-9″,10″-dioxo-9″,10″-dihydroanthracen-1″-yl)oxy)ethyl)-1-(pyridin-2?-ylmethyl)-1H-benzo[d]imidazol-3-ium bromide and 3-(2′-((8″-hydroxy-9″,10″-dioxo-9″,10″-dihydroanthracen-1″-yl)oxy)ethyl)-1-(pyridin-2?-ylmethyl)-1H-benzo[d]imidazol-3-ium hexafluorophosphate were prepared and characterized. The single crystal structure of 3-(2′-((8″-hydroxy-9″,10″-dioxo-9″,10″-dihydroanthracen-1″-yl)oxy)ethyl)-1-(pyridin-2?-ylmethyl)-1H-benzo[d]imidazol-3-ium bromide was determined by X-ray single crystal diffraction. Particularly, anion recognition using 3-(2′-((8″-hydroxy-9″,10″-dioxo-9″,10″-dihydroanthracen-1″-yl)oxy)ethyl)-1-(pyridin-2?-ylmethyl)-1H-benzo[d]imidazol-3-ium hexafluorophosphate as a chemosensor was carried out via fluorescence and ultraviolet spectroscopy, ¹H NMR titrations, HRMS and IR spectra. The response of this chemosensor to fluoride anion can be observed through both remarkable fluorescence quenching and color change under visible light (from orange to purple). The results indicated that this chemosensor can distinguish fluoride anion from other anions via the instrument and naked eyes, and this is greatly convenient in practical operation.