A magnetic sorbent was fabricated by coating the magnetized graphene oxide with polystyrene (PS) to obtain a sorbent of the type GO-Fe3O4@PS. The chemical composition and morphology of the sorbent were characterized. The sorbent was employed for the enrichment of polycyclic aromatic hydrocarbons (PAHs) from water samples. Various parameters affecting the enrichment were investigated. The PAHs were then quantified by gas chromatography with flame ionization detection. Linear responses were found in the range of 0.03–100 ng mL?1 for naphthalene and 2-methylnaphthalene, and of 0.01–100 ng mL?1 for fluorene and anthracene. The detection limits (at an S/N ratio of 3) range between 3 and 10 pg mL?1. The relative standard deviations (RSDs) for five replicates at three concentration levels (0.05, 5 and 50 ng mL?1) of analytes ranged from 4.9 to 7.4%. The method was applied to the analysis of spiked real water samples. Relative recoveries are between 95.8 and 99.5%, and RSD% are <8.4%.
Graphical abstract A magnetic sorbent was fabricated by polystyrene coated on the magnetic graphene oxide for the extraction and preconcentration of PAHs in water samples prior to their determination by gas chromatography with flame ionization detection.
The authors report on a novel sorbent (thermally treated natural zeolite; clinoptilolite) for use in dispersive micro-solid phase extraction (D-μ-SPE) of polycyclic aromatic hydrocarbons (PAHs) from water samples. The method was applied to the D-μ-SPE of 16 priority PAHs which then were quantified by gas chromatography with mass spectrometric detection (GC-MS). The method was validated in terms of specificity and selectivity, linearity and linear range, accuracy, precision, uncertainty, limits of detection and quantification. Figures of merit include (a) linear analytical ranges between 2.08 and 208 ppb, and (b) detection limits in the range from 0.01 to 0.92 ppb. The method was successfully applied to the determination of PAHs in river waters.
Graphical abstract Schematic representation of dispersive micro-solid phase extraction (D-μ-SPE) of trace levels of PAHs in water samples by using thermally treated clinoptilolite as sorbent prior to gas chromatography-mass spectrometry analysis (GC-MS).
An efficient approach is demonstrated for preparing particles consisting of a silver core and a shell of molecularly imprinted polymer (Ag@MIP). The MIP is prepared by using bisphenol A (BPA) as the template and 4-vinylpyridine as the functional monomer. The Ag@MIP fulfills a dual function in that the silver core acts as a SERS substrate, while the MIP allows for selective recognition of BPA. The Ag@MIP is characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, thermogravimetric analysis and Raman spectroscopy. The Raman intensity of Ag@MIP is higher than that of bare silver microspheres. The detection limit for BPA is as low as 10?9 mol·L?1.
Graphical abstract Schematic illustration of the preparation of silver microspheres coated with a molecularly imprinted polymer (Ag@MIPs) for detecting bisphenol A (BPA) by surface enhanced Raman scattering (SERS).
Melamine functionalized cellulose@carbon nanotubes were prepared by the following method: (a) Cellulose was dissolved in a mixture of urea and NaOH solutions and then mixed with multiwall carbon nanotubes; (b) the MWCT-modified cellulose was precipitated by addition of water; (c) the MWCNTs were activated with thionyl chloride, and finally reacted with melamine. The resulting sorbent was used in preconcentration of Co(II) ions prior to their determination by flame atomic absorption spectroscopy. The sorbent was characterized by FTIR and field emission scanning electron microscopy. The effects of the pH value of the medium, contact time, and elution conditions were optimized. The calibration plot is linear in the 3 to 200 μg·L￣1 Co(II) concentration range, the limit of detection is 0.8 μg·L￣1, and the relative standard deviation (at a concentration of 100 μg·L￣1) is 3.5 %. The maximum sorption capacity is 167 mg·g￣1. The method was applied to the preconcentration of cobalt ions from (spiked) food and water samples and gave recoveries between 96 and 102 %.
The authors describe an ethylene glycol assisted precipitation method for synthesis of Er(III)/Yb(III)-doped BiF3 nanoparticles (NPs) at room temperature. Under 980-nm light irradiation, the NPs emit upconversion (UC) emission of Er(III) ions as a result of a two-photon absorption process. The temperature-dependent green emissions (peaking at 525 and 545 nm) are used to establish an unambiguous relationship between the ratio of fluorescence intensities and temperature. The NPs have a maximum sensitivity of 6.5?×?10?3 K?1 at 619 K and can be applied over the 291–691 K temperature range. The results indicate that these NPs are a promising candidate for optical thermometry.
Graphical abstract Schematic of the room-temperature preparation of Er(III)/Yb(III)-doped BiF3 nanoparticles with strongly temperature-dependent upconversion emission.
This review (with (318) refs) describes progress made in the design and synthesis of morphologically different metal oxide nanoparticles made from iron, manganese, titanium, copper, zinc, zirconium, cobalt, nickel, tungsten, silver, and vanadium. It also covers respective composites and their function and application in the field of electrochemical and photoelectrochemical sensing of chemical and biochemical species. The proper incorporation of chemical functionalities into these nanomaterials warrants effective detection of target molecules including DNA hybridization and sensing of DNA or the formation of antigen/antibody complexes. Significant data are summarized in tables. The review concludes with a discussion or current challenge and future perspectives.
Stable copper nanoclusters (CuNCs) were prepared by utilizing D-penicillamine as both the stabilizer and reductant. The emission of the CuNCs (with excitation/emission peaks at 390/645 nm) is largely stabilized by coating with poly(sodium-p-styrenesulfonate) (PSS). Cytochrome c (Cyt c) quenches the fluorescence of the PSS-coated CuNCs, and this effect was exploited to design a quenchometric fluorometric assay for Cyt c. If trypsin is added to the loaded CuNCs, it will hydrolyze Cyt c to form peptide fragments, and fluorescence is gradually restored. A highly sensitive and fluorometric turn-off-on assay was constructed for sequential detection of Cyt c and trypsin. The linear ranges for Cyt c and trypsin are from 8.0 nM to 680 nM, and from 0.1 to 6.0 μg mL?1, and the lower detection limits are 0.83 nM and 20 ng mL?1 for Cyt c and trypsin, respectively.
Graphical abstract Schematic illustration of the fluorometric assay for trypsin based on the electron transfer between poly(p-styrenesulfonate)-protected copper nanoclusters (PSS-CuNCs) and cytochrome c (Cyt c).
A highly selective electrochemical sensor was fabricated based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe2O4 NPs). The nanocomposite has attractive properties such as high surface-to-volume ratio and good electrocatalytic activity towards the drugs acetaminophen (AC), epinephrine (EP), and melatonin (MT), best at working voltages of 0.35, 0.09 and 0.55 V (vs. Ag/AgCl), respectively. The linear ranges (and detection limits) are 6.5–135 (0.4) μmol L?1 for AC, 5–100 (0.7) μmol L?1 for EP, and 6.5–145 (3) μmol L?1 for MT.
Graphical abstract A novel electrochemical sensor based on a modified carbon paste electrode with zinc ferrite nanoparticles (ZnFe2O4) for the simultaneous detection of the acetaminophen, epinephrine and melatonin was fabricated
A sorbent for selective extraction of phosphoproteins was obtained by immobilization of a Ce(IV)-substituted polyoxometalate on ethylenediamine-functionalized graphene oxide (CeEGO). The resulting composites exhibit an adsorption capacity of 981 mg g?1 for β-casein due to the synergistic effect of metal-affinity interaction between Ce(IV) and phosphate groups and π-stacking interaction between the polyoxometalate framework and the phosphate groups. The results of LC-MS and SDS-PAGE analysis show that the CeEGO composites can be applied to the extraction of phosphoproteins from protein mixture, and as little as 50 μg mL?1 of the phosphoprotein β-casein can be detected by SDS-PAGE. It was also applied to the extraction of β-casein from spiked biological samples such as drinking milk, whole blood and swine heart tissue extract.
Graphical abstract An efficient sorbent is obtained by immobilization of a Ce(IV)-substituted polyoxometalate on ethylenediamine-functionalized graphene oxide (CeEGO). The resulting composites exhibit highly selective capture capacity towards phosphoproteins due to the synergistic effect of metal-affinity interaction between Ce(IV) and phosphate groups and π-stacking interaction between the polyoxometalate framework and the phosphate groups.
Amorphous titania was modified with boric acid, and the resulting material was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray powder diffraction and X-ray photoelectron spectrometry. The new material, in contrast to conventional boronate affinity materials containing boronic acid ligands, bears boric acid groups. It is shown to exhibit high specificity for glycoproteins, and this was applied to design a method for solid phase extraction of glycoproteins as shown for ribonuclease B, horse radish peroxidase and ovalbumin. Glycoproteins were captured under slightly alkaline environment and released in acidic solutions. The glycoproteins extracted were detected by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The binding capacities for ribonuclease B, horse radish peroxidase and ovalbumin typically are 9.3, 26.0 and 53.0 mg ? g?1, respectively. The method was successfully applied to the selective enrichment of ovalbumin from egg white.
This review (with 85 refs.) summarizes the recent literature on the adsorption of common aromatic pollutants by using modified metal-organic frameworks (MOFs). Four kinds of aromatic pollutants are discussed, namely benzene homologues, polycyclic aromatic hydrocarbons (PAHs), organic dyes and their intermediates, and pharmaceuticals and personal care products (PPCPs). MOFs are shown to be excellent adsorbents that can be employed to both the elimination of pollutants and to their extraction and quantitation. Adsorption mechanisms and interactions between aromatic pollutants and MOFs are discussed. Finally, the actual challenges of existence and the perspective routes towards future improvements in the field are addressed.
Graphical abstract Recent advance on adsorption of common aromatic pollutants including benzene series, polycyclic aromatic hydrocarbons, organic dyes and their intermediates, pharmaceuticals and personal care products by metal-organic frameworks.
Under visible-light irradiation, a cathodic photoelectrochemical (PEC) sensor is presented for highly sensitive determination of Cr(VI) at a potential of ?0.25 V (vs SCE). PbS quantum dots (QDs) were capped with mercaptoacetic acid and assembled on the surface of an indium tin oxide (ITO) electrode via the linker poly(diallyl dimethyl ammonium chloride) providing a photoactive sensor. Cr(VI) accepts the photoelectrons generated by the PbS QDs. This promotes the separation of electron holes and enhances the cathodic photocurrent generated by a 470-nm LED. The sensor has 10 pM detection limit and a linear working range from 0.02 nM to 2 μM of chromate. The method was successfully applied to the determination of Cr(VI) and total chromium in spiked environmental water samples.
Graphical abstract Schematic illustration of the photocurrent enhancement response of ITO/PbS toward chromium(VI). In the presence of Cr(VI) (red line), Cr(VI) accepts the photoelectrons generated by the PbS QDs under 470-nm LED irradiation, resulting in improved photocurrent of ITO/PbS.
An electrochemical nanoaptasensor is described that is based on the use of a glassy carbon electrode (GCE) modified with electrodeposited silver nanoparticles (AgNPs). An aptamer (Apt) against trinitrotoluene (TNT) was then immobilized on the AgNPs. The addition of TNT to the modified GCE leads to decrease in peak current (typically measured at a potential of ?0.45 V vs. Ag/AgCl) of riboflavin which acts as an electrochemical probe. Even small changes in the surface (as induced by binding of Apt to TNT) alter the interfacial properties. As a result, the LOD is lowered to 33 aM, and the dynamic range extends from 0.1 fM to 10 μM without sacrificing specificity.
Graphical abstract Schematic presentation of a nanoaptasensor which is based on a glassy carbon electrode (GCE) modified with electrodeposited silver nanoparticles (AgNPs) and aptamer (Apt). It was applied to the detection of 2,4,6-trinitrotoluene (TNT) with the help of riboflavin (RF) as a redox probe.
The authors describe a method for the extraction of the herbicide 2-methyl-4-chlorophenoxyacetic acid (MCPA) from agricultural products. The metal organic framework (MOF) HKUST-1 (a copper(II) benzene-1,3,5-tricarboxylate) was used as a sorbent for efficient clean-up and preconcentration of MCPA. The effects of pH value, stirring time, amount of sorbent on extraction were optimized by central composite design. Ultrasonic waves were used for desorption procedure and its advantage was demonstrated for an increase in extraction recovery. Corona discharge ion mobility spectrometry (IMS) was then applied for fast and sensitive determination of MCPA. The method was validated in terms of sensitivity, recovery and reproducibility. Under the optimum conditions the calibration plot is linear between 0.035–0.200 μg. L?1. The detection limit is 10 ng L?1, with relative standard deviations of <5%. Real samples (water, soil and agricultural product) were spiked and then analyzed by this method, and the results revealed efficient solid phase extraction and recovery.
Graphical abstract Schematic presentation of a procedure for extraction of an organochlorine pesticide (2-methyl-4-chlorophenoxyacetic acid) from agriculture products using the HKUST-1 metal-organic framework prior to determination by ion mobility spectrometry based on its ionization in drift cell.
A nanocomposite modified with dibenzo-18-crown-6 was synthesized and applied as a new sorbent for the preconcentration of thallium(I) via ultrasound assisted-solid phase extraction. This extraction step was combined with electrothermal atomic absorption spectrometry to determine ultra-trace amounts of thallium(I). The nanocomposite was characterized by Fourier transform infrared spectroscopy, X-ray diffraction spectrometry, field emission scanning electron microscopy and transmission electron microscopy. Under the optimized conditions, a dynamic linear range from 7.0 to 435 ng L?1, a detection limit of 1.8 ng L?1 and a quantification limit of 6.0 ng L?1 were obtained. Also, the intra- and inter-day relative standard deviations for 20.0 ng mL?1 Tl(I) were calculated as ±4.8% and ±5.1%, respectively. The adsorbent was applied to the determination of thallium(I) in the environmental, biological and standard samples with satisfactory results.
Graphical abstract A magnetic nanocomposite was synthesized as adsorbent from halloysite nanotubes and a crown ether. Tl(I) ions were extracted selectively and determined by electrothermal atomic absorption spectrometry.
The authors describe a method for functionalization of gold nanoparticles (AuNPs) with the supramolecular host molecule, curcubit[7]uril (CB[7]) which can bind rhodamine B (RhB). The fluorescence of RhB is quenched by the AuNPs via surface energy transfer. On addition of ATP, a dimeric RhB-ATP complex is formed and RhB is pushed out of CB[7]. Hence, fluorescence increases by a factor of 8. This fluorescence recovery effect has been utilized to develop a new detection scheme for ATP. The assay, measured at fluorescence excitation and emission wavelengths of 500 nm and 574 nm respectively, works in the 0.5–10 μM concentration range and has a 100 nM detection limit. The method is not interfered by UTP, GTP, CTP, TTP, ascorbic acid and glutathione.
Graphical abstract Schematic of a method for determination of ATP in the 500 nM to 10 μM concentration range by using fluorescence recovery after surface energy transfer (SET) between rhodamine B (RhB) and gold nanoparticles capped with curcubit[7]uril (CB[7]).
A method is described for the synthesis of a nanocomposite containing FeOOH and N-doped carbon nanosheets. The nanocomposite was synthesized by a hydrothermal method using a Fe3O4/chitosan nanocomposite as the precursor. The nanocomposite displays peroxidase-like activity and catalyzes the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) by H2O2. This results in the formation of a blue colored product with an absorption maximum at 652 nm in the UV-vis spectra. Based on these findings, colorimetric assays were worked out for both hydrogen peroxide and glucose. The H2O2 assay works in the 5 to 19 μM concentration range, and the limit of detection is 5 nM. The glucose assay works in the 8 μM to 0.8 mM concentration range and has a 0.2 μM detection limit. The method was successfully applied to the determination of glucose in human urine.
Graphical abstract Schematic of the hydrothermal synthesis of a FeOOH/N-doped carbon nanocomposite. It was used to replace peroxidase enzyme for the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) in a visual colorimetric test for glucose in human urine.
The authors describe an upconversion nanoparticle-based (UCNP–based) fluorometric method for ultrasensitive and selective detection of Cu2+. The UCNPs show a strong emission band at 550 nm under near-infrared excitation at 980 nm. The principle of the strategy is that gold nanoparticles (AuNP) can quench the fluorescence of UCNP. In contrast, the addition of L-cysteine (Cys) can induce the aggregation of AuNP, resulting in a fluorescence recovery of the UCNPs. On addition of Cu2+, it oxidizes Cys to cystine and is reduced to Cu+. The Cu+ thusformed can be oxidized cyclically to Cu2+ by dissolved O2, which catalyzes and recycles the whole reaction. Thus, the aggregation of AuNP is inhibited and the fluorescence recovered by Cys is quenched. Under the optimal condition, the quenching efficiency shows a good linear response to the concentrations of Cu2+ in the 0.4–40 nM range. The limit of detection is 0.16 nM, which is 5 orders of magnitude lower than the U.S. Environmental Protection Agency limit for Cu2+ in drinking water (20 μM). The method has been further applied to monitor Cu2+ levels in real samples. The results of detection are well consistent with those obtained by atomic absorption spectroscopy.
Graphical abstract Gold nanoparticles (AuNP) as a high efficient fluorescence quenching reagent of upconversion nanoparticles (UCNP) were used in a fluorometric method for detection of Cu2+ based on a cyclic catalytic oxidation amplification strategy.
The authors describe four different kinds of sorbents for solid-phase extraction (SPE) and preconcentration of proteins from complex samples. All are based on the use of a poly(glycidyl-co-ethylene dimethacrylate) host monolith that was chemically functionalized by using two different ligands (ammonia and cysteamine). Gold nanoparticles (AuNPs) or silver NPs were then assembled to the amino or thiol groups. The resulting materials are shown to be viable stationary phases for use in SPE cartridges. The sorbents can selectively retain bovine serum albumin, and the thiol-modified sorbents containing AuNPs and AgNPs provide the highest recoveries (>90%) and satisfactory loading capacities (29.3 and 17.6 μg?mg?1 of sorbent, respectively). The applicability of these nanosorbents was demonstrated by preconcentrating viscotoxins from mistletoe extracts. The enriched fractions were subjected to MALDI-TOF analysis to underpin their selectivity.
Graphical abstract Hybrid materials based on methacrylate polymers modified with gold or silver nanoparticles were used as sorbents for solid phase extraction and preconcentration of bovine serum albumin and mistletoe viscotoxins, this followed by MALDI-TOF analysis.
Graphene oxide (GO), nanosized Fe3O4 and zeolite imidazolate framework-8 (ZIF-8) were hybridized as a multifunctional sorbent for use in microextraction. The sorbent was characterized by SEM, TEM, XRD and FTIR. The composite is porous, has a high specific surface (> 600 m2·g?1) and is paramagnetic. The GO sheets are shown to act as carriers for the Fe3O4 nanoparticles and ZIF-8. The composite is a viable material for the preconcentration of atorvastatin and simvastatin from urine prior to their determination by HPLC with PDA detection. The limits of detection are 116 and 387 pg·mL?1, respectively. Recoveries from spiked urine samples range between 84.7 and 95.7%, with relative standard deviation of ≤4.5%. Enrichment factors range from 169 to 191. The method was successfully applied to the determination of atorvastatin in urine. Moreover, this sorbent is regenerable and recyclable for at least seven times without obvious decrease in performance.
Graphical abstract A composite sorbent composed of a zeolite imidazolate framework, Fe3O4 and graphene oxide was applied to the extraction of statins in urine prior their determination by HPLC.
