一类平衡大气边界层边界条件研究

基于标准k-ε湍流模型,首先利用湍流粘度方程和剪切应力在整个边界层内恒定的假设,推导出一类耗散率表达式,并根据常用的湍动能入口剖面方程以及平均风速剖面方程,计算获得相应的耗散率方程;然后在输运方程中添加自定义源项,通过已经确定的平均速度方程、湍动能方程、耗散率方程计算得到相应输运方程的自定义源项表达式,并进行空风洞数值模拟,从而得到了一类满足平衡大气边界层的来流边界条件．通过将这种边界条件与由湍流平衡条件得到的边界条件进行比较,表明本方法获得的边界条件更适用．并且,本方法无需考虑修正壁面函数和修正湍流模型常数,因而计算更为简单,可为平衡大气边界层的研究提供一种新的思路．     

A k–$${\varepsilon}$$ turbulence closure model of an isothermal dry granular dense matter

The turbulent flow characteristics of an isothermal dry granular dense matter with incompressible grains are investigated by the proposed first-order k–\({\varepsilon}\) turbulence closure model. Reynolds-filter process is applied to obtain the balance equations of the mean fields with two kinematic equations describing the time evolutions of the turbulent kinetic energy and dissipation. The first and second laws of thermodynamics are used to derive the equilibrium closure relations satisfying turbulence realizability conditions, with the dynamic responses postulated by a quasi-linear theory. The established closure model is applied to analyses of a gravity-driven stationary flow down an inclined moving plane. While the mean velocity decreases monotonically from its value on the moving plane toward the free surface, the mean porosity increases exponentially; the turbulent kinetic energy and dissipation evolve, respectively, from their minimum and maximum values on the plane toward their maximum and minimum values on the free surface. The evaluated mean velocity and porosity correspond to the experimental outcomes, while the turbulent dissipation distribution demonstrates a similarity to that of Newtonian fluids in turbulent shear flows. When compared to the zero-order model, the turbulent eddy evolution tends to enhance the transfer of the turbulent kinetic energy and plane shearing across the flow layer, resulting in more intensive turbulent fluctuation in the upper part of the flow. Solid boundary as energy source and sink of the turbulent kinetic energy becomes more apparent in the established first-order model.     

Application of photobleaching molecular tagging velocimetry to turbulent bubbly flow in a square duct

To evaluate turbulence energy budget in bubbly flows, an image processing method in a photobleaching molecular tagging velocimetry is improved for accurate evaluation of velocity gradients. Turbulence properties in single-phase and two-phase dilute-bubbly flows in a square duct are measured using the improved method. As a result, the following conclusions are obtained: (1) The axial velocity and axial turbulent intensity measured by the present method agree well with those measured by laser Doppler velocimetry not only for the single-phase flow but also for the dilute-bubbly flow. (2) The present method can measure velocity components and velocity gradients in the vicinity of the wall, and therefore the present method is of great use in understanding the mechanism of turbulence generation and dissipation near the wall. (3) The present method can provide detailed information on turbulence structure such as turbulence kinetic energy budget. (4) Bubbles tend to increase not only the turbulence production but also the turbulence dissipation.     

Heat Transfer Influenced by Turbulent Airflow Inside an Axially Rotating Diffuser

The paper presents a study of heat transfer between the turbulent airflow and the inner wall surface of an axial diffuser rotating around its longitudinal axis. Heat transfer was assessed through the measurement of a time-dependent temperature field of the diffuser inner wall surface. Measurements of the instantaneous flow velocity components were performed by a laser–Doppler anemometry system, which delivered information on mean velocity components as well as on the turbulence intensity. A significant increase of all three mean velocity components was observed near the rotating diffuser wall in comparison with a non-rotating diffuser. Temperature field measurements were carried out by means of infrared thermography. The experiment showed a significant dependence of the temperature field on the turbulent flowfield induced by diffuser rotation. A strong influence of the flow separation and reattachment on the temperature distribution was observed, while rotation was found to suppress the occurrence of flow separation from the diffuser wall. Properties of the velocity field such as turbulent kinetic energy were directly coupled with the temperature distribution in order to gain the information on how to enhance or reduce heat transfer by changing the integral parameters of the diffuser (e.g. rotation frequency or amount of flow).     

The evolution equation of joint Pdf of turbulent velocity and dissipation

According to the hypothesis that the dissipation of turbulent kinetic energy satisfies log-normal distribution, a stochastic model of dissipation is provided and the Langevin model^[6] of velocity is modified. Then a joint Pdf equation of turbulent velocity and dissipation is derived. We solve numerically the joint Pdf equation using Monte Carlo method and obtain satisfactory results for decaying turbulence and homogeneous turbulent shear flow. The preliminary results show that the model is well working.     

Turbulence Energy Distribution in the Stokes Layer

Using the method of matched asymptotic expansions, an analytical solution of the balance equation for turbulence energy is constructed for a shallow basin (sea) in which the fluid depth does not exceed the Stokes layer thickness. In this case, a gradient-viscous balance is established with the turbulent viscosity being balanced mainly by the pressure gradient. It is shown that nonlinear boundary layers attributable to turbulence energy diffusion are formed near the bottom and the free surface (or ice). In the neighborhood of the point of maximum flow velocity (if this maximum is attained inside the flow), a nonlinear internal boundary layer also develops. Outside these layers, the turbulence energy generation is in the first approximation balanced by the energy dissipation. Asymptotic solutions for the boundary layers are constructed.     

Dissipation rate correction methods

Dissipation rates of the turbulent kinetic energy and of the scalar variance are underestimated when the measurement resolution of the small scales of a turbulent flow field are insufficient. Results are presented of experiments conducted in a salt-stratified water tunnel (Schmidt number ∼700). Dissipation rates are determined to be underestimated, and thus correction techniques based on velocity structure functions and mixed-moment functions are proposed. Dissipation rates in laboratory experiments of shear-free, grid-generated turbulence are determined from balance calculations of the kinetic energy and scalar variance evolution equations. Comparisons between the structure function and balance estimates of dissipation show that the corrections are O(1) for the kinetic energy dissipation rate, and are O(100) for the scalar variance dissipation rate. This difference is due to the lack of resolution down to the Batchelor scales that is required for a high Schmidt number flow. Simple correction functions based on microscale Reynolds numbers are developed for both turbulent kinetic energy and scalar variance dissipation rates. Application of the technique to the results of laboratory experiments of density stratified turbulence, sheared turbulence, and sheared density stratified turbulence yields successful corrections. It is also demonstrated that the Karman–Howarth equality (and the analogous Yaglom equation) that relates second and third-order structure functions to dissipation rates is valid for both unstrained (decaying grid-generated turbulence) and density stratified and sheared turbulence at least up to the magnitudes of strains of the current experiments Nt∼10, St∼10, respectively. This is helpful for it allows the use of these equations in the analysis of turbulence even when the large scale background profiles of velocity and scalar are unknown.     

Similarity solutions of vertical plane wall plume based on finite analytic method

The turbulent flow of vertical plane wall plume with concentration variation was studied with the finite analytical method. The k-epsilon model with the effect of buoyancy on turbulent kinetic energy and its dissipation rate was adopted. There were similarity solutions in the uniform environment for the system of equations including the equation of continuity, the equation of momentum along the flow direction and concentration, and equations of k, epsilon. The finite analytic method was applied to obtain the similarity solution. The calculated data of velocity, relative density difference, the kinetic energy of turbulence and its dissipation rate distribution for vertical plane plumes are in good agreement with the experimental data at the turbulent Schmidt number equal to 1.0. The variations of their maximum value along the direction of main flow were also given. It shows that the present model is good, i.e., the effect of buoyancy on turbulent kinetic energy and its dissipation rate should be taken into account, and the finite analytic method is effective.     

A hybrid dynamic Smagorinsky model for large eddy simulation

A hybrid dynamic subgrid-scale model (HDSM) pertaining to Large-eddy simulation (LES) has been developed. The coefficient obtained by German dynamic Smagorinsky model (DSM) was integrated with a new dynamic coefficient, based on the dynamic subgrid characteristic length and controlled by the subgrid-scale (SGS) motions. In HDSM, the characteristic wave number determining the characteristic length of the dynamic subgrid is calculated from a new energy weighted mean method when the subgrid scale turbulent kinetic energy and the dissipation wave number are known. The dissipation wave-number is derived from the SGS turbulent kinetic energy spectrum equation. The total dissipation rate spectrum equation is based on the Pao energy spectrum and local equilibrium assumption. The dynamic subgrid characteristic length could take into account the rapidly fluctuating small scale behaviours and the spatial variation of turbulent characteristics. HDSM was used to simulate the fully developed channel and turbulent flow past a circular cylinder, and to determine the impact of the dam-break flow on downstream structure. The HDSM is robust in respect to anisotropic mesh and is less sensitive to grid resolution, and would accurately describe the energy transfer from large-scale to SGS fluctuations and capture more fluctuations of turbulence with same meshes compared to the DSM.     

Prediction of the particle-laden jet with a two-equation turbulence model

A two-equation turbulence model for two-phase flows has recently been proposed by Elghobashi & Abou-Arab (1983). They derived the exact equations of the kinetic energy of turbulence and the rate of dissipation of that energy, and modeled the turbulent correlations, resulting from time-averaging, up to third order. In order to validate the proposed model, a turbulent axisymmetric gaseous jet laden with spherical uniform-size solid particles is studied here. The predictions of the mean flow properties of the two-phases and the turbulence kinetic energy and shear stress of the carrier phase show good agreement with the experimental data.     

A Length-Scale Equation

We derive an equation for the average length-scale in a turbulent flow from a simple physical model. This is a tensorial length-scale. We use as a model the evolution of a blob of turbulent kinetic energy under the influence of production, dissipation, and transport, as well as distortion by the mean motion. A single length-scale is defined which is biased toward the smallest of the scales in the various directions. Constants are estimated by consideration of homogeneous decay. Preliminary computations are carried out in a mixing layer and a two-dimensional jet, using the new length-scale equation and the equation for the turbulent kinetic energy. The results are compared with data and with the predictions of the classical k-epsilon equations; the new results are quite satisfactory. In particular, the plane jet/round jet anomaly is approximately resolved. This revised version was published online in July 2006 with corrections to the Cover Date.     

Turbulence Budgets in Buoyancy-affected Vertical Backward-facing Step Flow at Low Prandtl Number

The paper investigates buoyancy impact on the vertical flow over a backward-facing step at low Prandtl number by Direct Numerical Simulation. In particular, the very low Prandtl number of liquid sodium, 0.0088, is considered in the regime of mixed convection, i.e. for Richardson numbers below unity. The effects of buoyancy on mean flow, heat transfer and turbulence are assessed. Buoyancy is found to attenuate recirculation and, consequently, increase heat transfer. Turbulence is decreased in the attached boundary layer for moderate buoyancy impact but surpasses the levels found in forced convection at the largest Richardson number investigated. Beyond the mean flow and second moments, the budgets of turbulent kinetic energy, Reynolds shear stress, temperature variance, and turbulent heat flux components are studied and related to the alterations in the mean field quantities. Due to scale separation, production and dissipation nearly balance for temperature variance while this is not the case for turbulent kinetic energy. Similar findings for the turbulent heat fluxes show that the correlation between temperature and pressure gradient is the most important contribution to the budget aside from production and dissipation. In addition to the physical insight into this flow, the data presented may be used for the validation and improvement of turbulence models for liquid metal flows.     

Simulation and Modelling of a Skewed Turbulent Channel Flow

A time-dependent three-dimensionally skewed flow is investigated using direct numerical simulations of the incompressible Navier-Stokes equations. The effect on the instantaneous and mean turbulent field is investigated. Instantaneous flowfields reveal that the skewing has the effect of initially reducing the strength and height of quasi-streamwise vortices of both signs of rotation with respect to the skewing. A mechanism for this process is put forward. The mean flowfields show drops in turbulence quantities such as turbulence kinetic energy. In addition to this, two-equation turbulence modelling of the flow is carried out. This highlights a deficiency, in that the standard turbulence models are unable to capture the drop in turbulence intensity due to the skewing. A modification based on the exact dissipation equation is found to significantly improve the model behaviour for this flow. This revised version was published online in July 2006 with corrections to the Cover Date.     

Turbulent boundary-layer analysis using finite elements

The use of finite element methods for turbulent boundary-layer flow is relatively recent and of limited extent.¹ In the present study, we extend the group variable approach of Fletcher and Fleer^2,3 to treat turbulent boundary layer flows with heat transfer using a two-equation turbulence model. The main concepts in the formulations include a Dorodnitsyn-type transformation which uses a velocity component as the transverse variable, a ‘variational’ formulation for the transformed equations using special test functions and development of a two-equation turbulence model in terms of the turbulent kinetic energy and turbulence dissipation rate as additional field variables. Several numerical test cases have been examined comparing the results with finite difference calculations and comparing the two-equation turbulence model with an algebraic turbulence model.     

Statistics and Modelling of Turbulent Kinetic Energy Transport in Different Regimes of Premixed Combustion

The statistical behaviour of turbulent kinetic energy transport in turbulent premixed flames is analysed using data from three-dimensional Direct Numerical Simulation (DNS) of freely propagating turbulent premixed flames under decaying turbulence. For flames within the corrugated flamelets regime, it is observed that turbulent kinetic energy is generated within the flame brush. By contrast, for flames within the thin reaction zones regime it has been found that the turbulent kinetic energy decays monotonically through the flame brush. Similar trends are observed also for the dissipation rate of turbulent kinetic energy. Within the corrugated flamelets regime, it is demonstrated that the effects of the mean pressure gradient and pressure dilatation within the flame are sufficient to overcome the effects of viscous dissipation and are responsible for the observed augmentation of turbulent kinetic energy in the flame brush. In the thin reaction zones regime, the effects of the mean pressure gradient and pressure dilatation terms are relatively much weaker than those of viscous dissipation, resulting in a monotonic decay of turbulent kinetic energy across the flame brush. The modelling of the various unclosed terms of the turbulent kinetic energy transport equation has been analysed in detail. The predictions of existing models are compared with corresponding quantities extracted from DNS data. Based on this a-priori DNS assessment, either appropriate models are identified or new models are proposed where necessary. It is shown that the turbulent flux of turbulent kinetic energy exhibits counter-gradient (gradient) transport wherever the turbulent scalar flux is counter-gradient (gradient) in nature. A new model has been proposed for the turbulent flux of turbulent kinetic energy, and is found to capture the qualitative and quantitative behaviour obtained from DNS data for both the corrugated flamelets and thin reaction zones regimes without the need to adjust any of the model constants.     

Implementation of physical boundary conditions into computational domain in modelling of oscillatory bottom boundary layers

This paper discusses the importance of realistic implementation of the physical boundary conditions into computational domain for the simulation of the oscillatory turbulent boundary layer flow over smooth and rough flat beds. A mathematical model composed of the Reynolds averaged Navier–Stokes equation, turbulent kinetic energy (k) and dissipation rate of the turbulent kinetic energy (ε) has been developed. Control‐volume approach is used to discretize the governing equations to facilitate the numerical solution. Non‐slip condition is imposed on the bottom surface, and irrotational main flow properties are applied to the upper boundary. The turbulent kinetic energy is zero at the bottom, whereas the dissipation rate is approaching to a constant value, which is proportional to the kinematic viscosity times the second derivative of the turbulent kinetic energy. The output of the model is compared with the available experimental studies conducted in oscillatory tunnels and wave flume. It is observed that the irrotational flow assumption at the upper boundary is not realistic in case of water tunnels. Therefore, new upper boundary conditions are proposed for oscillatory tunnels. The data of wave flume show good agreement with the proposed numerical model. Additionally, several factors such as grid aspect ratio, staggered grid arrangement, time‐marching scheme and convergence criteria that are important to obtain a robust, realistic and stable code are discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

暖季强降雨对多年冻土南界斜坡路基稳定性影响分析

为阐明表面活性剂水溶液的减阻作用,使用LDV对零压梯度的二维湍流平板边界层中的CTAB 表面活性剂水溶液的湍流特性进行了实验研究. 结果表明：与牛顿流体相比,CTAB水溶液边 界层的粘性底层增厚;主流时均速度分布有被层流化的趋势,对数分布域上移;主流方向速 度湍动强度峰值减小,且远离壁面,在靠近边界层中部,出现第2峰值;垂直于主流方向的 速度湍动强度受到了大幅度抑制,雷诺应力沿着边界层厚度方向几乎为零. 结果说明CTAB 水溶液具有减弱湍流湍动各个成分相关度的作用,从而能够使雷诺应力降低、湍流能量生成 项减小最终降低流体的输送动力.     

Effect of turbulence of external flow on the turbulent boundary layer at a plate

In [1, 2] turbulence of the external flow was taken into account by specifying the turbulent energy at the external boundary of the boundary layer on integrating the energy-balance equation for the turbulence. In [3] a special correction that allowed the turbulence of the external flow to be taken into account was introduced in determining the mixture path. In [4, 5] the turbulent energy calculated from the energy-balance equation of the turbulence was added to the energy induced by turbulence of the external flow, the energy distribution of the induced turbulence being specified using an empirically selected function. In [6, 7] a method of taking into account the effect of turbulence of the external flow on a layer of mixing and a jet was proposed. In the present work, this method is applied to the boundary layer at a plate.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 26–31, May–June, 1977.     

Effect of a liquid dispersed phase on the wall flow structure in static mixer

The effect of a liquid dispersed on the wall flow structure in static mixer is analyzed by using an electrochemical method. Both laminar and turbulent flows have been investigated. The axial wall velocity gradient and turbulent intensity have been studied along the static mixer in both flow regimes and for different dispersed phase concentrations. The spectral analysis of the wall velocity gradient fluctuations was analyzed in the turbulent regime. For volume fraction higher than 5%, the effect of the dispersed liquid phase is very important for all the studied parameters. The turbulence associated to the dispersed phase leads to an increase of the energy dissipation in the static mixer and also to a modification of energy dissipation mechanism.     

可压缩各向同性衰减湍流直接数值模拟研究

采用五阶有限差分WENO格式直接模拟了高初始湍流Mach数的可压缩均匀各向同性湍流,主要分析了湍流的统计特性 和压缩性的影响,包括能谱特征、激波串、耗散率、标度律等. 研究表明,湍动能主要来自于速度场螺旋分量的贡献;各向同性湍流的小尺度脉动对压缩性更为敏感,并且压缩性的增强加快了湍流大 尺度脉动向小尺度脉动的湍动能输运;随着湍流Mach数的升高,胀量(压缩)耗散率所占比率也显著增长. 标度律分析表明,强可压缩湍流的横向速度结构函数仍然具有扩展自相似性;当阶数较高(p ≥ 5)时,纵向速度结构函数的扩展自相似性则不再成立. 对于压缩性较弱的湍流,与不可压缩湍流一致,横向湍流脉动的间歇性要强于纵向湍流脉动;而对于强可压缩湍流,纵向湍流脉动的 间歇性要强于横向湍流脉动.